Micellar and Mixed-Micellar Effects on Alkaline Hydrolysis of tris(1,10–phenanthroline)iron(II): Kinetic Exploration

The kinetics of alkaline hydrolysis of tris(1,10–phenanthroline)iron(II) has been studied in the presence of nonionic and mixed nonionic–ionic micellar media at 308 K. The effects of mixed-micellar environments of nonionic with ionic surfactants (C₁₂E₂₃/ATABs and C₁₂E₂₃/SDS) on the hydrolytic rate have been studied. The rate decreases monotonically with an increment of [C₁₂E₂₃]_T (total Brij 35 concentration) at constant [^?OH]₀ and has been discussed with the pseudo-phase micellar model. The rate also decreases with [C₁₂E₂₃]_T at a continuous addition of ionic surfactants (ATABs and SDS). The observed rate constant k_obs follows the empirical relation: k_obs = (k₀ + θK [C₁₂E₂₃]_T)/(1 + K [C₁₂E₂₃]_T) (where θ and K are empirical constants). The values of θ remain unaffected, whereas K decreases nonlinearly with [ATABs]_T in a mixed C₁₂E₂₃?ATAB micellar system. But the k_obs in a mixed C₁₂E₂₃–SDS micellar system is much lower than that of the C₁₂E₂₃–ATAB system and do not comply with any micellar kinetic models.     

Effect of strong electrolytes on surface activity of aqueous 1,1-dimethyl-1-alkylhydrazinium chloride in aqueous solutions

The effect of electrolytes on the surface activity of aqueous anionic (1,1-dimethyl-1-alkylhydrazinium chloride homologues with the C₁₀–C₁₈ alkyl radical) and nonionic (Neonol AF 9–12) surfactants in aqueous solutions was studied.     

Spin probes in micellar and polymer self-associating systems

The results of studies of micellar and self-associating polymer systems by spin probe ESR spectroscopy are summarized. The local dynamics and structures of low-molecular-weight micelles built of cationic surfactants bearing long alkyl chains (from C₁₆ to C₂₂), gels of hydrophobically modified polymers, polymer micelles, micellar complexes of nonionic surfactant (Brij58) with hydrogels based on polyacrylic acid, and associates formed in aqueous solutions of poly(diphenylenesulfophthalide) are discussed. Interest in these systems is caused by prospects of their practical use as carriers in drug delivery, in biotechnology, for the enhancement of oil production, and in other purposes.     

Micellization and Interaction Properties of Aqueous Solutions of Mixed Cationic and Nonionic Surfactants

The micellization process of binary surfactant mixtures containing cationic surfactants viz. dodecyl pyridinium halide (C₁₂PyX; X=Cl, Br, I), tetradecyl pyridium bromide (C₁₄PyBr), and hexadecyl pyridium halide (C₁₆PyX; X=Cl, Br) and a nonionic surfactants viz. dodecyl nonapolyethylene glycol ether (C₁₂E₉), dodecyl decapolyethylene glycol ether (C₁₂E₁₀), dodecyl dodecapolyethylene glycol ether (C₁₂E₁₂), and dodecyl pentadecapolyethylene glycol ether (C₁₂E₁₅) in water at different mole fractions (0–1) were studied by surface tension method. The composition of mixed micelles and the interaction parameter, β evaluated from the CMC data obtained by surface tension for different systems using Rubingh's theory were discussed. Activity coefficient (f₁ and f₂) of cationic surfactant (C_nPyBr)/C₁₂E_m (n=12, 14, 16 and m=10, 12, 15) mixed surfactant systems were evaluated, which shows extent of ideality of individual surfactant in mixed system. The stability factors for mixed micelles were also discussed by Maeda's approach, which was justified on the basis of steric factor due to difference in head group of nonionic surfactant.     

Mixed micellization of an anionic gemini surfactant (GA) with conventional polyethoxylated nonionic surfactants in brine solution at pH 5 and 298 K

The micellization behavior of an anionic gemini surfactant, GA with nonionic surfactants C₁₂E₈ and C₁₂E₅ in presence of 0.1 M NaCl at 298 K temperature, has been studied tensiometrically in pure and mixed states, and the related physicochemical parameters (cmc, γ _cmc, pC ₂₀, Γ _max, and A _min) have been evaluated. Tensiometric profile (γ vs log [surfactant]), for conventional surfactants, generally consists of a single point of intersection; a gradually decreasing line (normally linear, or with slight curvature) ultimately saturates in γ at a particular [surfactant], corresponding to complete monolayer saturation. The gemini, in this report, led to two unequivocal breaks in the tensiometric isotherm. An attempt to the interpretation of the two breaks from molecular point of view is provided, depending solely on the chemical structure of the surfactant. The gemini, even in mixed state with the conventional nonionic surfactants C₁₂E₅ and C₁₂E₈, manifested the dual breaks; of course, the dominance of the feature decreases with increasing mole fraction of the nonionics in the mixture. Theories of Clint, Rosen, Rubingh, Motomura, Georgiev, Maeda, and Nagarajan have been used to determine the interaction between surfactants at the interface and micellar state of aggregation, the composition of the aggregates, the theoretical cmc in pure and mixed states, and the structural parameters according to Tanford and Israelachvili. Several thermodynamic parameters have also been predicted from those theories.     

Co-solubilization of the Hydrophobic Drugs Carbamazepine and Nifedipine in Aqueous Nonionic Surfactant Media

Co-solubilization of the hydrophobic drugs Carbamezipine (CBZ) and Nifedipine (NFD) by micellar solutions at 25 °C, using two series of polyoxyethylene based nonionic surfactants, was measured and compared. The first series is composed of surfactants with a 12 carbon (C₁₂) hydrophobic chain while the second series had 16 carbon (C₁₆) hydrophobic chains. Experimental results were obtained for solubilization and co-solubilization of CBZ and NFD within the micelles at saturation and quantification was done in terms of the molar solubilization ratio and the micelle–water partition coefficient employing spectrophotometric and tensiometric techniques. The extent of micellar solubilization of CBZ is much greater than NFD. The C₁₂ series of surfactants exhibit higher solubilization capacities for CBZ than the C₁₆ series while the reverse is the case for NFD. Co-solubilization results showed competitive solubilization of the drugs. A synergistic effect on the solubilization of NFD was observed in the presence of CBZ in Brij30 and Brij56 surfactant systems while, in the remaining surfactants, the solubility of NFD was slightly reduced. Since the surfactants used in the present study are either nontoxic or have minimal toxicity, it is expected that they can be employed as drug delivery vehicles for co-administration of the two drugs in vivo. Both from industrial and research points of view, this paper reports a comprehensive study for co-solubilization of differently structured drugs in micellar media.     

Diffusion-controlled adsorption kinetics at the interface between air and aqueous micellar solution of heptaethylene glycol monododecyl ether

The diffusion-controlled adsorption kinetics of micellar surfactant C₁₂E₇ (heptaethylene glycol monododecyl ether) solutions was studied theoretically and experimentally. The corrected diffusion equation, which was used to describe the diffusion of the monomers in the micellar solutions, was solved under the initial and boundary conditions by means of Laplace transformation. The dynamic surface adsorption γ(t) as a function of surface lifetime t, monomer diffusion coefficient D and the demicellization constant was derived. The dynamic surface tensions γ(t) of aqueous submicellar and micellar solutions were measured via maximal bubble pressure method. By analyzing the experimental data, the determined demicellization constant of C₁₂E₇ at 25°C was between 100–116 s^?1.     

Zum einfluss des leitelektrolyten auf die polarographi- sche reduktion des methylbromids

The irreversible polarographic reduction of methyl bromide was studied in aqueous solution in the presence of various base electrolytes.E_{$\text{1}\text{2}$} values became more positive with increasing charge density and surface activity of the cations. Mixed electrolytes with alkali metal salts and tetraalkylammonium salts or cationic surfactants suppressed this increase inE_{$\text{1}\text{2}$} values. With such mixed electrolytes containing highly active surfactants of sufficient charge density, a normal polarographic determination of methyl bromide is possible. The final diffusion rate of the active component has also a considerable effect on E_{$\text{1}\text{2}$} values so that the E_{$\text{1}\text{2}$} values of such systems cannot be characterized by the solution composition alone.     

Thermodynamic and Dynamic Properties of Micellar Aggregates of Nonionic Surfactants with Short Hydrophobic Tails

The densities and viscosities of binary aqueous mixtures of poly(ethylenoxide)hexanols [C₆H₁₃(OCH₂CH₂)_mOH, C₆E_m] (m= 3, 4, and 5) have been studied in the micellar composition range. For the same surfactants the self-diffusion coefficients in mixtures with heavy water have been determined by the spin-echo pulsed field gradient method. The volumetric data are interpreted by means of the phase separation model, and values of the CMC, volume change, and standard free energy change of micellization are obtained. From the viscosity data the hydration numbers of the surfactant hydrophilic head in the micellar state are computed; they are in agreement with those obtained from HDO self-diffusion data. The surfactant self-diffusion data are used to calculate the apparent micelle radius and the aggregation number. The micellization parameters obtained for the different surfactants are compared and discussed.     

A potentiometric titration study on the dissociation of bile acids related to the mode of interaction between different head groups of nonionic surfactants with free bile salts upon mixed micelle formation in water

By constructing an elaborate set of potentiometric titration together with data analysis system, apparent acid dissociation indices (pK _a ^app ) for two bile acids were determined in the mixed surfactant system of bile salts (Sodium Deoxycholate, NaDC, and Sodium Chenodeoxycholate, NaCDC) with nonionic surfactants (Hexaethyleneglycol monon-dodecylether, C₁₂E₆, Decanoyl-N-methylglucamide, MEGA-10) in aqueous solution at ionic strength 1.5 as a function of mole fraction in the surfactant mixture. It was found that with increasing the bile salt concentration, pK _a ^app as well as pH showed an abrupt rise at a certain concentration of the bile salt being regardable as a critical micellization concentration (CMC) and reached a constant value at the range sufficiently higher than CMC for each pure bile salt system, meaning that the dissociation degree of carboxyl group in micelle is smaller than that in bulk. In the mixed systems of free bile salts with nonionic surfactants, the dissociation state of carboxyl groups in mixed micelles depends on the species of hydrophilic group of nonionic surfactants as well as on mole fraction in the surfactant mixture.     

Significance of glass transition temperature to polymer latex stabilisation by nonionic surfactants

Equilibrium colloid stability measurements with nonionic surfactant (C₁₂E₈) stabilised polybutyl methacrylate (PBMA) latex dispersions indicate a sudden temperature induced destabilisation coinciding with the glass transition temperature,Tg, of the polymer. In control experiments with polystyrene latex particles of similar size, for whichTg was not approached, the flocculation temperature was significantly higher. The effect is interpreted in terms of a reduced adsorbed layer thickness aboveTg caused by mixing of part of the surfactant molecule with the polymer. This interpretation is supported by DSC, elastic modulus and mechanical damping measurements on films made from dispersions of the same latex containing commercial nonionic surfactants. These measurements indicate a shift inTg in the presence of surfactant consistent with partial penetration of the polymer surface by the surfactant. In addition, C₁₂E₈ adsorption measurements show increased adsorption (or absorption) onto PBMA aboveTg which is irreversible on both dilution and temperature reduction.     

Spectroscopic Investigations on the Interaction of Crystal Violet with Nonionic Micelles of Brij and Igepal Surfactants in Aqueous Media

The behavior of the triphenylmethane dye crystal violet in aqueous solutions containing polyoxyethylene nonionic surfactants was investigated using absorption and fluorescence spectroscopic techniques. The interactions of the dye were examined in micellar media in order to prevent dye aggregation and to ensure maximum dye and surfactant interaction. The relative fluorescence enhancements and the binding constants of the dye to the surfactant micelles were determined. The micropolarities of the micellar environment sensed by the pyrene probe were estimated from the I ₁/I ₃ intensity ratios of the fluorescence spectra of pyrene. The fluorescence quenching of pyrene by hexadecylpyridinium chloride was investigated in aqueous surfactant mixtures at a fixed concentration of surfactant in order to determine the aggregation numbers. Attempts were made to correlate the binding constants obtained in this investigation to various micellar parameters.     

Adsorption of Pure Nonionic Alkylethoxylated Surfactants down to Low Concentrations at a Silica/Water Interface as Determined Using a HPLC Technique

The adsorption of pure nonionic alkylethoxylated surfactants of the C₁₂E_nseries at silica/water interface has been determined using a very precise HPLC technique. The number of ethoxylated groups was varied from 2 to 9. The adsorption isotherms were constructed with special attention to the very low surface coverage domain. It is shown that at very low concentration, the adsorption amounts are higher as the number of ethoxylated groups increases but the reverse trend is found at higher surfactant concentration and above the critical micelle concentration. It is shown that this behavior is the consequence of the interplay of the primary and secondary adsorption mechanisms depending upon the length of the ethoxylated chain. The maximum adsorption quantities is not a linear function of the number of ethoxylated groups. This and other observations confirm the viewpoint that the behavior of nonionic surfactant aggregates adsorbed at a hydrophilic surface carries many similarities with the properties of this class of nonionic surfactant aggregates in bulk aqueous solutions.     

Micellization of sodium dodecyl sulfate and polyoxyethylene dodecyl ethers in solution

The effect of polyoxyethylene type nonionic surfactants (C₁₂E _n n = 3, 4, 5, 6, 7 and 8) on the aqueous solution of sodium dodecyl sulfate (SDS) in absence and presence of NaCl was examined using small-angle neutron scattering (SANS), dynamic light scattering (DLS), and viscosity measurements. Upon addition of C₁₂E _n , micellar size of SDS was found to increase significantly, and such micellar elongation was further enhanced in the presence of NaCl. Micellar growth is most significant in presence of shorter moieties of C₁₂E _n (e.g., n = 3, 4) as compared to higher ethereal oxygen content. The results of structural investigations with SANS and DLS to confirm this assumption are reported. The cloud point of C₁₂E _n has increased upon addition of SDS and decrease with NaCl, and a typical behavior is observed when both SDS and NaCl were present.     

Interactions of alkyl triphenyl phosphonium bromides with aqueous solutions of LM200 and JR400 polymers

The interactions of the cationic cellulose ether derivatives JR400 and the hydrophobically modified derivative LM200 with cationic alkyl triphenylphosphonium bromides, were investigated in aqueous media. Conductometric, tensiometric and fluorescence techniques were employed in this study. The presence of polymer induced surfactant aggregation and polymer bound aggregates, were detected for C₁₆ and C₁₄ triphenylphosphonium bromide surfactants with LM200. Gibbs free energy of transfer and the dielectric constant values sensed by the fluorescent probe at the micellar interface were evaluated and discussed in terms of strength of interaction between the polymers and surfactants.     

Anionic–Nonionic Mixed Surfactant Systems: Micellar Interaction and Thermodynamic Behavior

The interactions between an anionic surfactant, viz., sodium dodecylbenzenesulfonate and nonionic surfactants with different secondary ethoxylated chain length, viz., Tergitol 15-S-12, Tergitol 15-S-9, and Tergitol 15-S-7 have been studied in the present article. An attempt has also been made to investigate the effect of ethoxylated chain length on the micellar and the thermodynamic properties of the mixed surfactant systems. The micellar properties like critical micelle concentration (CMC), micellar composition (X_A), interaction parameter (β), and the activity coefficients (f_A and f_NI) have been evaluated using Rubingh's regular solution theory. In addition to micellar studies, thermodynamic parameters like the surface pressure (Π_CMC), surface excess values (Γ_CMC), average area of the monomers at the air–water interface (A_avg), free energy of micellization (ΔG_m), minimum energy at the air–water interface (G_min), etc., have also been calculated. It has been found that in mixtures of anionic and nonionic secondary ethoxylated surfactants, a surfactant containing a smaller ethoxylated chain is favored thermodynamically. Additionally, the adsorption of nonionic species on air/water interface and micelle increases with decreasing secondary ethoxylated chain length. Dynamic light scattering and viscometric studies have also been performed to study the interactions between anionic and nonionic surfactants used.     

Study of the reaction Fe(CN)5(4‐CNpy)3− + S2O82− in aqueous salt and micellar solutions

The reaction Fe(CN)₅(4‐CNpy)³⁻ + S₂O₈²⁻ (4‐CNpy=4‐cyanopyridine) was studied in aqueous salt solutions in the presence of several electrolytes as well as in anionic, cationic, and nonionic surfactant solutions. In aqueous salt solutions the noncoulombic interactions seem to be important in determining the positive salt effects observed. The salting effects are influencing the activity coefficients of any participant in the reaction, including those ion pairs which can be formed between the anionic reagents and the cations which come from the added salts. The changes in surfactant concentration in anionic and nonionic surfactant solutions do not affect the reaction rate, which is similar to that in pure water at the same ionic strength. In cationic micellar solutions an increase in the rate constant compared to that in pure water is found; the reaction rate decreasing when the surfactant concentration increases. The kinetic trends can be explained assuming that the reagents are totally bound to the micelles and, therefore, an increase in the surfactant concentration results in a decrease in the reagent concentrations at the micellar phase and thus in a decrease in the observed rate constant. © 1999 John Wiley & Sons, Inc. Int J Chem Kinet: 31: 229–235, 1999     

SOLUBILIZATION IN MIXED REVERSE MICELLAR SYSTEMS OF AOT/NONIONIC SURFACTANTS/n-HEPTANE

Solubilization of water and aqueous NaCl solutions in mixed reverse micellar systems of anionic surfactant AOT and nonionic surfactants in n-heptane was studied. It was found that the maximum solubilization capacity of water was higher in the presence of certain concentrations of NaCl electrolyte, and these concentrations increased with the increase of nonionic surfactant content and their EO chain length. Soluibilization capacity was enhanced by mixing AOT with nonionic surfactants. The observed phenomena were interpreted in terms of the stability of the interfacial film of reverse micellar microdroplet and the packing parameter of the surfactant that formed mixed reverse micelles.     

Interaction between two homologues of cationic surface active ionic liquids and the PEO-PPO-PEO triblock copolymers in aqueous solutions

The interaction of nonionic triblock copolymers of poly(ethyleneoxide) (PEO) and poly(propyleneoxide) (PPO) (PEO_nPPO_mPEO_n) with a series of cationic surface-active ionic liquids in aqueous solutions have been investigated. The cationic surface-active ionic liquids include 1-alkyl-3-methylimidazolium bromide (C_nmimBr, n?=?8, 10, 12, 14, 16) and N-alkyl-N-methylpyrrolidinium bromide (C_nMPB, n?=?12, 14, 16). For different polymer-surfactant systems, the critical aggregation surfactant concentration (cac), the surfactant concentration to form free micelles (C _m), and the saturation concentration of surfactant on the polymer chains (C ₂) were determined using isothermal titration microcalorimetry (ITC) and conductivity measurements. The structure of the formed aggregates depended strongly on the hydrophobicity of the surfactant and the ratio of polymer/surfactant concentration. For C₈mimBr, there were not any micelle-like surfactant?Cpolymer clusters detected in the solution, and only micelles appeared. For other surfactants, the polymer?Csurfactant aggregates were formed in the solution, which was verified by the appearance of a broad endothermic peak in the ITC thermograms. The intensity of polymer?Csurfactant interaction increased with the hydrophobicity of the surfactants and the polymers but was not affected by the surfactant headgroups.     

Micelle structure and molecular self‐diffusion in isononylphenol ethoxylate–water systems

The structure and dynamic properties of micellar solutions of nonionic surfactants of a series of isononylphenol ethoxylates, C₉H₁₉C₆H₄O(C₂H₄O)_nH (where n = 6,8,9,10, and 12), were studied by NMR diffusometry, dynamic light scattering, and viscosimetry. The sizes of the micelles were determined for different surfactants and at different surfactant concentrations. The numbers of water molecules bound by a micelle and by one oxyethylene group of the surfactant were estimated. Copyright © 2013 John Wiley & Sons, Ltd.