Bis-ureidodeazapterin (Bis-DeAP) as a general route to supramolecular star polymers

Supramolecular recognition unit Bis-DeAP, 1, containing two high affinity hydrogen-bonding acceptor-acceptor-donor-donor (AADD) arrays was designed to self-assemble into cyclic assemblies. It was prepared through a highly scalable synthesis and was further functionalized with 2-bromo-2-methylpropanoyl bromide and used to initiate the polymerization of methylmethacrylate (MMA). Bis-DeAP-PMMA polymers quantitatively self-assembled into star polymers in toluene. In DMF Bis-DeAP-PMMA forms a mixture of star polymers and unassembled polymers. Bis-DeAP was also functionalized with polyethylene glycol (PEG) polymers. The Bis-DeAP-PEG polymers formed star polymers in DMF; however, higher molecular weight polymeric assembles that varied with concentration were observed in water. Mixing studies in toluene indicated that the self-assembled star polymers are kinetically stable and resist mixing even at elevated temperatures. In DMF, kinetically controlled structures are initially observed, however, mixing occurs at a faster rate and assembled star polymers show a decrease in polydispersity index (PDI) over time. In addition, Bis-DeAP functionalized PS and PMMA were mixed in DMF to generate a star copolymer through self-assembly.     

Synthesis of isocyanate-based brush block copolymers and their rapid self-assembly to infrared-reflecting photonic crystals

The synthesis of rigid-rod, helical isocyanate-based macromonomers was achieved through the polymerization of hexyl isocyanate and 4-phenylbutyl isocyanate, initiated by an exo-norbornene functionalized half-titanocene complex. Sequential ruthenium-mediated ring-opening metathesis polymerization of these macromonomers readily afforded well-defined brush block copolymers, with precisely tunable molecular weights ranging from high (1512 kDa) to ultrahigh (7119 kDa), while maintaining narrow molecular weight distributions (PDI = 1.08-1.39). The self-assembly of these brush block copolymers to solid thin-films and their photonic properties were investigated. Due to the rigid architecture of these novel polymeric materials, they rapidly self-assemble through simple controlled evaporation to photonic crystal materials that reflect light from the ultra-violet, through the visible, to the near-infrared. The wavelength of reflectance is linearly related to the brush block copolymer molecular weight, allowing for predictable tuning of the band gap through synthetic control of the polymer molecular weight. A combination of scanning electron microscopy and optical modeling was employed to explain the origin of reflectivity.     

Synthesis,characterization, and star polymer assembly of boronic acid end‐functionalized polycaprolactone

Boronic acid end‐functionalized polycaprolactone (PCL) polymers were synthesized by ring‐opening polymerization using a pinacol boronate ester‐containing (Bpin) initiator. The polymerization provides access to boron‐terminated polymers (i.e. Bpin‐PCL‐OH) with narrow molecular weight distributions (PDI = 1.09). Postsynthetic manipulation of the polymer's terminal hydroxyl group by copper‐catalyzed azide‐alkyne cycloaddition chemistry provides a series of bis end‐functionalized polymers with significant structural diversity at the termini. Deprotection of the boronate ester end group was accomplished with an acidic solid phase DOWEX resin. The boronate ester deprotection methodology does not result in hydrolysis of the polymeric backbone. The boronic acid‐tipped polymers were converted into star polymer assemblies using thermal dehydration and ligand‐facilitated trimerization. Thermal dehydration of (HO)₂B‐PCL‐OAc to the corresponding boroxine‐based star polymer assembly was inefficient and lead to degradation products. Ligand‐facilitated trimerization using either pyridine or 7‐azaindole as the Lewis base was efficient and mild. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis of well‐defined cyclodextrin‐core star polymers

The synthesis of 21‐arm methyl methacrylate (MMA) and styrene star polymers is reported. The copper (I)‐mediated living radical polymerization of MMA was carried out with a cyclodextrin‐core‐based initiator with 21 independent discrete initiation sites: heptakis[2,3,6‐tri‐O‐(2‐bromo‐2‐methylpropionyl]‐β‐cyclodextrin. Living polymerization occurred, providing well‐defined 21‐arm star polymers with predicted molecular weights calculated from the initiator concentration and the consumed monomer as well as low polydispersities [e.g., poly(methyl methacrylate) (PMMA), number‐average molecular weight (M_n) = 55,700, polydispersity index (PDI) = 1.07; M_n = 118,000, PDI = 1.06; polystyrene, M_n = 37,100, PDI = 1.15]. Functional methacrylate monomers containing poly(ethylene glycol), a glucose residue, and a tert‐amine group in the side chain were also polymerized in a similar fashion, leading to hydrophilic star polymers, again with good control over the molecular weight and polydispersity (M_n = 15,000, PDI = 1.03; M_n = 36,500, PDI = 1.14; and M_n = 139,000, PDI = 1.09, respectively). When styrene was used as the monomer, it was difficult to obtain well‐defined polystyrene stars at high molecular weights. This was due to the increased occurrence of side reactions such as star–star coupling and thermal (spontaneous) polymerization; however, low‐polydispersity polymers were achieved at relatively low conversions. Furthermore, a star block copolymer consisting of PMMA and poly(butyl methacrylate) was successfully synthesized with a star PMMA as a macroinitiator (M_n = 104,000, PDI = 1.05). © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2206–2214, 2001     

Thickness transition of a rigid supramolecular polymer

A low molecular weight bisurea in nonpolar solvents is shown to self-assemble by hydrogen bonding into two distinct high molecular weight structures. At low temperature and high concentration, the most stable structure is a thick cylindrical assembly, responsible for the very high viscosity of the solution. At higher temperature or lower concentration, the thick filaments disappear in favor of thinner filaments, leading to a lower viscosity. The reversible transition occurs over a temperature range of 5 degrees C only, showing that it is highly cooperative. The structural switch can also be triggered by changing the nature of the solvent or the composition in the case of a mixture of two bisureas. The high cooperativity and the tunability of this transition are useful for the design of responsive materials.     

多重响应性超支化星形聚合物的合成与组装以及控制释放研究

含二硫键的自引发单体与2-(2-甲氧基乙氧基)乙基甲基丙烯酸酯(MEO₂MA)进行自缩合乙烯基共聚合得到超支化PMEO₂MA(H-PMEO₂MA). 以它作大分子引发剂, 引发二甲氨基乙基甲基丙烯酸酯(DMAEMA)进行原子转移自由基聚合, 合成了具有温度、pH以及氧化还原多重响应性的超支化星形聚合物H-PMEO₂MA-star-PDMAEMA. 证明了H-PMEO₂MA有低临界溶液温度(LCST); 研究了PDMAEMA 链段的长度和溶液的pH值对超支化星形聚合物的LCST的影响. 当H-PMEO₂MA-star-PDMAEMA水溶液温度从2 ℃升高至室温, H-PMEO₂MA变成疏水性而发生聚集, 形成以H-PMEO₂MA为核, PDMAEMA为壳的胶束. 在胶束形成过程中, 将尼罗红装载到这种聚合物胶束中, 形成释药系统, 研究了pH、氧化还原响应性释药性能.     

Titanium and zirconium complexes containing modified TREN ligands for the polymerization of 1‐alkenes—A comparative study

The titanium and zirconium complexes in C₃ and C_s symmetric forms synthesized from corresponding aminotriols in combination with MAO polymerized 1‐hexene in a controlled manner. When the polymerization temperature was lowered, they gave high molecular weight monodisperse polyhexene with narrow polydispersities indicating quazi‐living systems. The isotactic polyhexene obtained from C₃ titanium catalyst has the molecular weight of around 46,500 with PDI of 1.3 and the hemi‐isotactic polymer from C_s titanium catalyst has the molecular weight of around 617,000 with PDI of 1.3. The analogues zirconium complexes upon activation with MAO polymerize hexene to give polyhexene having molecular weight of 53,000 (C₃) and 626,000 (pseudo‐C_s) with PDI ranging from 1.2 to 1.4. The MIX‐titanium catalyst prepared from the 50:50 mixture of aminotriols was also able to polymerize 1‐hexene and the GPC traces of the polyhexene suggests that even though the catalyst was formed from the mixture of aminotriols, the C₃ and C_s symmetry of the catalysts retain its originality avoiding the formation of aggregates or polymeric forms. When one of the arms of aminotriol was methylated yield C₂ and meso aminodiol ligands and their corresponding titanium and zirconium complexes gave higher molecular weight polyhexenes with lower PDI (C₂‐Zr‐M_n: 260,000; PDI: 1.05–1.10; mesoZr‐M_n: 220,000; PDI: 1.05–1.10) possibly suggesting that these systems are close to living systems. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5470–5479, 2007     

Self-organization process of ordered structures in linear and star poly(styrene)-poly(isoprene) block copolymers: Gaussian models and mesoscopic parameters of polymeric systems

Mesoscopic simulations of linear and 3-arm star poly(styrene)-poly(isoprene) block copolymers was performed using a representation of the polymeric molecular structures by means of Gaussian models. The systems were represented by a group of spherical beads connected by harmonic springs; each bead corresponds to a segment of the block chain. The quantitative estimation for the bead-bead interaction of each system was calculated using a Flory-Huggins modified thermodynamical model. The Gaussian models together with dissipative particle dynamics (DPD) were employed to explore the self-organization process of ordered structures in these polymeric systems. These mesoscopic simulations for linear and 3-arm star block copolymers predict microphase separation, order-disorder transition, and self-assembly of the ordered structures with specific morphologies such as body-centered-cubic (BCC), hexagonal packed cylinders (HPC), hexagonal perforated layers (HPL), alternating lamellar (LAM), and ordered bicontinuous double diamond (OBDD) phases. The agreement between our simulations and experimental results validate the Gaussian chain models and mesoscopic parameters used for these polymers and allow describing complex macromolecular structures of soft condensed matter with large molecular weight at the statistical segment level.     

星形聚苯乙烯本体粘弹性对结构的依赖性

用应力松弛法研完了一组4—12支链星形聚苯乙烯本体的粘弹性。从应力松弛主曲线测定了零切变粘度η_0、稳态柔量J_e~o和其它流变学参数。结果发现,零切变粘度和最大松弛时间τ_m强烈地依赖于聚合物的分子尺寸,并且可以用无扰特性粘度或折合分子量来描述。η_0和τ_m随支化度增大而增大。实验还直接证实了支链长度相同的星形聚合物的J_e~o与支链数目无关,但是星形聚合物的稳态柔量比具有和支链间分子量相同的线形聚合物的稳态柔量大。     

Low polydispersity star polymers via cross-linking macromonomers by ATRP

A new method for the synthesis of star polymers with high molecular weight and narrow molecular weight distribution (MWD) is presented. The star copolymers were prepared by atom transfer radical (co)polymerization (ATRP) of linear macromonomers with divinyl cross-linkers using low molar mass initiator. In contrast to prior "arm-first" procedures with macroinitiators, by using lower ratio of concentration of initiator to MM, the star polymers contained less initiating sites in the core, which decreased the extent of star-star coupling reactions and resulted in formation of star polymers with narrower MWD. Addition of more cross-linker and initiator during the reaction increased the star molecular weight and star yield while retaining the narrow MWD of the star polymer. For example, we synthesized a star polymer with molecular weight Mn = 466 000 g/mol and Mw/Mn < 1.2 in >98% yield.     

Modeling the molecular weight distribution of block copolymer formation in a reversible addition–fragmentation chain transfer mediated living radical polymerization

Block copolymers have become an integral part of the preparation of complex architectures through self‐assembly. The use of reversible addition–fragmentation chain transfer (RAFT) allows blocks ranging from functional to nonfunctional polymers to be made with predictable molecular weight distributions. This article models block formation by varying many of the kinetic parameters. The simulations provide insight into the overall polydispersities (PDIs) that will be obtained when the chain‐transfer constants in the main equilibrium steps are varied from 100 to 0.5. When the first dormant block [polymer–S? C(Z)?S] has a PDI of 1 and the second propagating radical has a low reactivity to the RAFT moiety, the overall PDI will be greater than 1 and dependent on the weight fraction of each block. When the first block has a PDI of 2 and the second propagating radical has a low reactivity to the RAFT moiety, the PDI will decrease to around 1.5 because of random coupling of two broad distributions. It is also shown how we can in principle use only one RAFT agent to obtain block copolymers with any desired molecular weight distribution. We can accomplish this by maintaining the monomer concentration at a constant level in the reactor over the course of the reaction. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5643–5651, 2005     

Hexameric capsules of lipophilic pyrogallolarene and resorcinarene in solutions as probed by diffusion NMR: one hydroxyl makes the difference

[reaction: see text] NMR diffusion measurements were used to characterize the self-assembled molecular capsule of pyrogallolarene 2c in CDCl(3) solutions. The results were compared with the characteristics of the hexameric capsule of 1b. Although both 2c and 1b self-assemble into hexameric capsules, the role of water in these capsules is rather different. It was also found that the capsule of 2c is more stable in polar media than that of 1b.     

Well-defined boron-containing polymeric lewis acids

A general new route to well-defined polymeric Lewis acids via borylation of silylated polymers is reported. Trimethylsilylated polystyrene (PS-Si) of controlled molecular weight and low polydispersity (PDI < 1.15) was obtained via atom transfer radical polymerization (ATRP) of 4-(trimethylsilyl)styrene. The functional polymer PS-Si was quantitatively borylated using BBr3 to give poly(4-dibromoborylstyrene) (PS-B), a novel soluble boron-containing polymeric Lewis acid. PS-B readily reacted with nucleophiles serving as a precursor to a family of new polymers with boron centers of variable Lewis acidity. Reaction of PS-B with Cu(C6F5) gave the highly Lewis acidic polymer poly[4-bis(pentafluorophenyl)borylstyrene], the first polymeric analogue of tris(pentafluorophenyl)borane.     

Narrowly-Distributed Conjugated Polymers Synthesized through Suzuki Polymerization with Palladium(II) N-Heterocyclic Carbene Complex Confined in Dendritic Mesoporous Silica Nanoparticles

A catalytic heterogenous Suzuki polymerization method was developed by confining the Pd(II)-catalyzed cross coupling reactions to take place exclusively in the nanochannels of dendritic mesoporous silica nanoparticles. Conjugated polymers with various monomer combinations, including donor-acceptor structures, were obtained in high yields. The molecular weights of the obtained polymers were well controlled with narrow molecular weight distributions (PDI value down to 1.13). All the polymeric products were highly soluble in common organic solvents, granting them with high processability. All the features of this confined Suzuki polymerization method endow the conjugated polymers great potential in optoelectronic applications.     

Facile one‐pot synthesis of linear and radial block copolymers of styrene and isoprene through a novel coupling agent by living anionic polymerization

A new methodology is successfully used for the concurrent synthesis of three different copolymers; diblock, triblock, and three‐armed star‐block copolymers of styrene and isoprene via the living anionic polymerization with control over the molecular weight and weight fractions of each block. The room temperature polymerization process has resulted in the well defined linear and radial block copolymers, when the living di‐block of poly(styrene‐b‐isoprene) was coupled using cheap and readily available malonyl chloride as a novel coupling agent giving nearly 100% yield. The resulting block copolymers have narrow polydispersity index (PDI = 1.01–1.09) with a good agreement between the calculated and the observed molecular weights. The results are further supported by fractionation of the block copolymers by reversed‐phase temperature gradient interaction chromatography (RP‐TGIC) technique followed by size exclusion chromatography (SEC). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2636–2641, 2010     

Effect of molecular weight on microcrystalline structure formation in polymer with perylenediimide side chain

The effect of molecular weight on the molecular aggregation structure of polymers bearing a pendant perylenediimide (PDI) side chain, designated PAc12PDI, was investigated using synchrotron radiation X‐ray diffraction measurements. It was found that depending on molecular weight, either the main chain axis or the side chain axis behaves as the longitudinal axis in fiber samples and was aligned parallel to the fiber axis. A similar phenomenon is present in thin film samples, but was complicated by the additional influence of the interfacial free energy of the side chain group. Even in the case of the polymer with lower molecular weight, the face plane of PDI was found to show both parallel and perpendicular orientations to the substrate (i.e., flat‐on and edge‐on orientations). On the other hand, if the length of the main chain is sufficiently long with respect to the length of the side chain, the face plane of PDI was oriented perpendicular to the substrate, leading to an edge‐on orientation in the thin film. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2275–2283     

Unequal Perylene Diimide Twins in a Quadruple Assembly

Natural light-harvesting (LH) systems can divide identical dyes into unequal aggregate states, thereby achieving intelligent “allocation of labor”. From a synthetic point of view, the construction of such kinds of unequal and integrated systems without the help of proteinaceous scaffolding is challenging. Here, we show that four octatetrayne-bridged ortho-perylene diimide (PDI) dyads ( POP s) self-assemble into a quadruple assembly (POP)₄ both in solution and in the solid state. The two identical PDI units in each POP are compartmentalized into weakly coupled PDIs (P520) and closely stacked PDIs (P550) in (POP)₄ . The two extreme pools of PDI chromophores were unambiguously confirmed by single-crystal X-ray crystallography and NMR spectroscopy. To interpret the formation of the discrete quadruple assembly, we also developed a two-step cooperative model. Quantum-chemical calculations indicate the existence of multiple couplings within and across P520 and P550, which can satisfactorily describe the photophysical properties of the unequal quadruple assembly_. This finding is expected to help advance the rational design of dye stacks to emulate functions of natural LH systems.     

基于星型杂臂环糊精聚合物的纳米胶束: 构筑及包合特性

通过胺化反应和原子转移自由基聚合(ATRP),合成了以β-环糊精为“核”,以1条聚乙二醇和2~4条聚N-异丙基丙烯酰胺为“臂”的双亲水性星型杂臂聚合物(MPEG-CD-PNIPAMx)。通过1H NMR,13C NMR和凝胶渗透色谱/多角度激光光散射联用(SEC/MALLS)对其结构进行了表征。对1H NMR峰面积积分计算得聚N-异丙基丙烯酰胺“臂”数为2~4。通过紫外-可见分光光度计测得该星型大分子的较低溶液临界温度(LCST)为37℃。MPEG-CD-PNIPAMx在其水溶液温度达到LCST以上时呈现两亲性,并通过疏水相互作用自组装成以聚N-异丙基丙烯酰胺为“核”,以β-环糊精及聚乙二醇为“壳”的纳米级胶束粒子。通过MPEG-CD-PNIPAMx及其胶束粒子在芘溶液中的荧光光谱,发现胶束粒子对疏水性客体小分子的包合可发生在处于壳层的β-环糊精的疏水性空腔和胶束粒子的疏水性内核。     

Self-assembly of supramolecular light-harvesting arrays from covalent multi-chromophore perylene-3,4:9,10-bis(dicarboximide) building blocks

We report on two multi-chromophore building blocks that self-assemble in solution and on surfaces into supramolecular light-harvesting arrays. Each building block is based on perylene-3,4:9,10-bis(dicarboximide) (PDI) chromophores. In one building block, N-phenyl PDI chromophores are attached at their para positions to both nitrogens and the 3 and 6 carbons of pyromellitimide to form a cross-shaped molecule (PI-PDI(4)). In the second building block, N-phenyl PDI chromophores are attached at their para positions to both nitrogens and the 1 and 7 carbons of a fifth PDI to produce a saddle-shaped molecule (PDI(5)). These molecules self-assemble into partially ordered dimeric structures (PI-PDI(4))(2) and (PDI(5))(2) in toluene and 2-methyltetrahydrofuran solutions with the PDI molecules approximately parallel to one another primarily due to pi-pi interactions between adjacent PDI chromophores. On hydrophobic surfaces, PDI(5) grows into rod-shaped nanostructures of average length 130 nm as revealed by atomic force microscopy. Photoexcitation of these supramolecular dimers in solution gives direct evidence of strong pi-pi interactions between the excited PDI chromophore and other PDI molecules nearby based on the observed formation of an excimer-like state in <130 fs with a lifetime of about 20 ns. Multiple photoexcitations of the supramolecular dimers lead to fast singlet-singlet annihilation of the excimer-like state, which occurs with exciton hopping times of about 5 ps, which are comparable to those observed in photosynthetic light-harvesting proteins from green plants.     

Synthesis,characterization, and rheological properties of hybrid titanium star‐shaped poly(n‐butyl acrylate)

The synthesis of hybrid star‐shaped polymers was carried out by atom transfer radical polymerization of n‐butyl acrylate from a well‐defined multifunctional titanium‐oxo‐cluster initiator. Conditions were identified to prevent possible side reactions among monomer, polymer, and the titanium‐oxo‐cluster ligands. Polymerizations provided linear first‐order kinetics and the evolution of the experimental molecular weight is also linear with the conversion. ¹H DOSY NMR and cleavage of the polymeric branches from the multifunctional initiator by hydrolysis were used to (i) prove the star‐shaped structure of the polymer, and (ii) demonstrate that the shoulder observed on size exclusion chromatograms is not due to a noncontrolled polymerization but to ungrafting of polymeric branches during analysis. Rheological properties of the hybrid star‐shaped poly(n‐butyl acrylate) were studied in the linear regime and show that the Ti‐oxo‐cluster not only increases significantly the viscosity of the polymer relative to its ungrafted arm but has a rheological signature which is qualitatively different from that of stars with organic cores suggesting that the Ti cluster reduces significantly the molecular mobility of the star. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011