Simultaneous GC-MS quantitation of acids and sugars in the hydrolyzates of immunostimulant, water-soluble polysaccharides of basidiomycetes

Summary The simultaneous quantitation of acids and sugars as their trimethyl silyl (TMS) derivatives has been extended in order to identify and quantitate the simple acid and sugar constituents in the hydrolyzates of various immunostimulant, water-soluble polysaccharides obtained from various Basidiomycetes, such as Armillariella mellea, Auricularia auricula-judae, Coriolus versicolor, Flammulina velutipes, Fomes fomentarius, Ganoderma applanatum, Ganoderma lucidum, Pleurotus ostreatus, Schizophyllum commune, Trametes hirsuta. Optimum hydrolysis conditions, performed with 2 M trifluoroacetic acid (TFAA) for five hrs, proved the presence of several sugars and acids with maximum recovery. (i) the total sugar/sugar alcohol content of polysaccharides varied between 20- and 65% and consisted of arabitol (0.01–10.2%), arabinose (0.09–1.3%), ribose (0.2–1.8%), fucose (0.3–1.2%), mannitol (0.01–5.3%), sorbitol (0.01–0.05%), galactiol (0.04%), fructose (0.08–0.8%), galactose (0.9–29%), glucose (10–53%), uronic acids (0.14–3.7%), sucrose (0.03–2%), trehalose (0.2–1%), cellobiose (0.01–0.6%), maltose (0.2–1.9%), other disaccharides (0.2–8%). (ii) The total of acids varied from 1.5 to 30% including o-phosphoric (1.3–19%), malic (0.08–4.7%), citric (0.08–4.7%), isocitric; (3%) and C₁₆−C₁₈ fatty acids (1–6%).     

A methodological and metabolite identification study of the metabolism of S-carboxymethyl-L-cysteine in man

Summary The analysis of 08:00–16:00 (0–8) hour urine collections following oral S-carboxymethyl-L-cysteine administration of 750 mg to 30 individuals identified S-carboxymethyl-L-cysteine, S-carboxymethyl-L-cysteine S-oxide, S-methyl-L-cysteine and S-methyl-L-cysteine S-oxide as the major urinary drug related compounds. No S-(carboxymethylthio)-L-cysteine mixed disulphide metabolite was found in the 08:00–16:00 hour urine collection but the metabolite was detected in the 16:00–00:00 (8–16) hour urune collection by paper chromatography, TLC and HPLC. The production of the S-oxide metabolites 08:00–16:00 hour urine collection) and the mixed disulphide metabolite (16:00–00:00 hour urine collection) were both shown to be biomodally distributed. A significant linear correlation of the S-oxides recovered following 08:00–16:00 hour urine collection as analysed by paper chromatography, TLC and HPLC is reported.     

Applications of nanostructured Pt-Au hybrid film for the simultaneous determination of catecholamines in the presence of ascorbic acid

Nanostructured platinum-gold (Pt–Au) hybrid film modified glassy carbon electrode (GCE) was fabricated by electro-deposition method in the presence of 2 × 10⁻⁴ mol l⁻¹ l-cysteine. To examine the surface morphological analysis, the (Pt–Au) hybrid film were electrochemically deposited on transparent semiconductor indium tin oxide (ITO) electrodes for scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) studies. From the SEM analysis, it was observed that the deposited nanoplatinum (250–400 nm) was formed as a cauliflower-shaped structure with the gold nanoparticles (30–90 nm). The concentration variation of additive l-cysteine results in the formation of cauliflower-shaped platinum nanoparticles. Further, the Pt–Au hybrid film modified GCE could be used for the detection of catecholamine neurotransmitters epinephrine (EP), norepinephrine (NEP) individually and in the presence of ascorbic acid (AA) in pH 7 phosphate-buffered solutions (PBS). Furthermore, the proposed Pt–Au hybrid film could be applied for the detection of epinephrine in injection solution and ascorbic acid from commercially available vitamin C tablets.     

Indoor 222Rn concentrations and the corresponding lung cancer risk in Celein region, west of Al Khums, Libya

Paramagnetic products stabilized in both 4,4′(5′)-di-(tert-butylcyclohexano)-18-crown-6 (DtBuCH18C6) and its solution in 1-octanol upon low temperature (77 K) X-rays irradiation were studied by ESR spectroscopy. Macrocyclic –O–ĊH–CH₂– radicals and acyclic O = C(H)–ĊH–O– radicals were found as main radiolysis products in neat DtBuCH18C6. Fraction of acyclic radicals resulting from the macrocycle cleavage was about 50%. No radical products resulted from t-Bu and cyclohexyl fragments were observed. It was concluded that the primary events were essentially concerned with ionization of the polyether moiety. Irradiation of frozen DtBuCH18C6 solutions in 1-octanol resulted in formation of radicals both from crown ether and alcohol.     

Modification and re-validation of the ethyl acetate-based multi-residue method for pesticides in produce

The ethyl acetate-based multi-residue method for determination of pesticide residues in produce has been modified for gas chromatographic (GC) analysis by implementation of dispersive solid-phase extraction (using primary–secondary amine and graphitized carbon black) and large-volume (20 μL) injection. The same extract, before clean-up and after a change of solvent, was also analyzed by liquid chromatography with tandem mass spectrometry (LC–MS–MS). All aspects related to sample preparation were re-assessed with regard to ease and speed of the analysis. The principle of the extraction procedure (solvent, salt) was not changed, to avoid the possibility invalidating data acquired over past decades. The modifications were made with techniques currently commonly applied in routine laboratories, GC–MS and LC–MS–MS, in mind. The modified method enables processing (from homogenization until final extracts for both GC and LC) of 30 samples per eight hours per person. Limits of quantification (LOQs) of 0.01 mg kg⁻¹ were achieved with both GC–MS (full-scan acquisition, 10 mg matrix equivalent injected) and LC–MS–MS (2 mg injected) for most of the pesticides. Validation data for 341 pesticides and degradation products are presented. A compilation of analytical quality-control data for pesticides routinely analyzed by GC–MS (135 compounds) and LC–MS–MS (136 compounds) in over 100 different matrices, obtained over a period of 15 months, are also presented and discussed. At the 0.05 mg kg⁻¹ level acceptable recoveries were obtained for 93% (GC–MS) and 92% (LC–MS–MS) of pesticide–matrix combinations.     

INAA application in the age dynamics assessment of Br,Ca, Cl,K, Mg,Mn, and Na content in the normal human prostate

The effect of age on chemical element contents in intact prostate of 64 apparently healthy 13–60 years old men was investigated by neutron activation analysis with high resolution spectrometry of short-lived radionuclides. Mean values (M ± SΕΜ) for content (mg/kg, dry weight basis) of chemical elements were: Br–31.6 ± 3.2, Ca–2150 ± 160, Cl–12670 ± 675, K–12010 ± 400, Mg–1150 ± 75, Mn–1.56 ± 0.09, and Na–10520 ± 340, respectively. A tendency of age-related increase in Ca content and decrease in Mn content was observed.     

Optimization of the Extraction Conditions and Simultaneous Quantification by RP-LC of Six Alkaloids in Evodiae Fructus

A reversed phase liquid chromatographic (LC) method coupled with DAD (250 nm) has been developed and validated for simultaneous quantification of six alkaloids, dehydroevodiamine (1), wuzhuyuamide-I (2), 5-hydroxyrutaecarpine (3), 14-formyldihydrorutaecarpine (4), evodiamine (5) and rutaecarpine (6), in 12 batches evodiae fructus [the dried, unripe fruits of Evodia rutaecarpa (Juss.) Benth. or E. rutaecarpa (Juss.) Benth. var. officinalis (Dode) Huang, E. rutaecarpa (Juss.) Benth. var. bodinieri (Dode) Huang] as a traditional Chinese medicine. The method was carried out by a C₁₈ column (250 × 4.6 mm) with a gradient mobile phase of methanol, acetonitrile, and phosphoric acid–triethylamine–buffer solution. The contents of 1–6 in the evodiae fructus could easily be determined within 70 min. The experimental results were satisfactory for the intra-day and inter-day precision and accuracy of the method for simultaneous determination. The linear calibration ranges of 1–6 were 40–1,000, 20–500, 1–100, 10–500, 40–1,000 and 80–1,000 μg mL⁻¹. The recoveries of 1–6 were 97.43–103.73% with RSDs from 0.21 to 1.99%. The limits of detection for 1–6 were 2.0, 2.0, 0.1, 1.0, 5.0 and 5.0 μg mL⁻¹, and the limits of quantification were 6.6, 6.6, 0.3, 3.3, 16.5 and 16.5 μg mL⁻¹. The method was successfully applied to the quantification of six alkaloids in the evodiae fructus.     

Basis of the 'duplication' strategy for enhancing the enantiomeric excess in chiral resolutions: proof of the equivalence of rate and product ratios

The 'duplication' strategy for the further enrichment of an already enantiomerically-enriched mixture consists of the formation of all the three possible 'dimeric' diastereomers, i.e., (R)–X–(R), (R)–X–(S) and (S)–X–(S), where X is an appropriate spacer that can be readily cleaved to yield the original enantiomers. The mixture of (R)–X–(R) and (S)–X–(S) thus obtained would be of higher enantiomeric excess (e.e.) as compared to the original mixture, on the basis of a simple kinetic scheme. The success of the strategy is experimentally well-established, but is apparently based on the (unproven) assumption that the theoretically-derived rate ratios are identical to the experimentally observed product ratios. Although the detailed kinetic treatment for a system such as the above is extremely complex, it is possible to show (mathematically) that the above assumption is indeed justified when all the three diastereomers are formed without chiral discrimination (as assumed in the strategy).     

Influence of Amino Acid Composition and Phosphorylation on the Ion Yields of Peptides in MALDI-MS

The influence of arginine (Arg), lysine (Lys), and phenylalanine (Phe) residues and phosphorylation on the molecular ion yields of model peptides have been quantitatively studied using matrix-assisted laser desorption/ionization (MALDI) mass spectrometry in both positive- and negative-ion mode. The results obtained from these experiments have been interpreted from the standpoint of two different components, namely, desorption and ionization, on the basis of the physicochemical properties of constituent amino acids of the model peptides. The presence of basic residues such as Arg and Lys enhanced the ion yields of protonated molecules [M + H]⁺. An N-terminal rather than a C-terminal Arg residue was advantageous for the formation of both [M + H]⁺ and [M – H]^–. The presence of the Phe residue resulted in the increase of the ion yields of both [M + H]⁺ and [M – H]^–. In contrast, the presence of phosphate group(s) contributed to the suppression of the yields of both [M + H]⁺ and [M – H]^– due to the loss of phosphate group. The detection limits for both [M + H]⁺ and [M – H]^– of model peptides have been evaluated.     

Hematological health-related intervals estimated using an indirect method in order to satisfy the accreditation standards

 The estimation of reference limits represents quite a taxing task for laboratories which frequently adopt the limits suggested by manufacturers or those reported in the literature. This practice does not meet the requirements of accreditation programs (i.e. Essential Criteria, Clinical Pathology Accreditation) that require laboratories to produce or check all their reference intervals. We collected 15 244 hematological results from females aged 0–99 years obtained by the Rovereto Hospital Laboratory and calculated the reference intervals, or to be more precise the health-related intervals, using an indirect method (based on all the inpatient and outpatient results). All the measurements were carried out using an automatic Coulter STK S analyzer, and the results were transferred to Verona by e-mail. The results for hemoglobin were: <1 year (n=154)=90–171 g/l; 2–8 years (n=619)=104–136 g/l; 9–14 years (n=322)=118–143 g/l; 15–44 years (n=6329)=106–144 g/l; 45–75 years (n=4893)=107–148 g/l; 75–99 years (n=2927)=90–153 g/l. The results appear different from the results currently used by Rovereto Hospital (120–160 g/l) but comparable to those reported in the literature with the exception of the subjects under 1 year and over 75 years, probably due to the excess of "diseased" subjects in these classes. The indirect method allows even small laboratories to produce or check their reference intervals for all age groups, increasing the clinical effectiveness of laboratory results and satisfying the accreditation standards. Received: 15 April 2000 · Accepted: 20 April 2000     

Contamination assessment of heavy metal in surface sediments of the Wuding River, northern China

The heavy metal contents and the contamination levels of the surface sediments of the Wuding River, northern China, were investigated. Heavy metal concentration ranged in μg g⁻¹: 50.15–71.91 for Cr, 408.1–442.9 for Mn, 20.11–43.59 for Ni, 17.51–20.1 for Cu, 68.32–89.57 for Zn, 0.2–0.38 for Cd and 15.08–16.14 for Pb in the Wuding River sediments. The enrichment factor (EF) and the geo-accumulation index (Igeo) demonstrated that the sediments of the Wuding River had been polluted by Cd, Cr and Ni, which mainly originated from anthropogenic sources, whereas the sediments had not been polluted by Zn, Pb, Cu and Mn, which were derived from the crust. In addition, the assessment results of EF and Igeo suggested that the sediments of the Wuding River was “moderately” polluted by Cd and “unpolluted to moderately” polluted by Cr and Ni. The elevated urban sewage discharges and agriculture fertilizers usage in river basin are the anthropogenic sources of these heavy metals in river.     

Use of experimental design in the optimisation of stir bar sorptive extraction followed by thermal desorption for the determination of brominated flame retardants in water samples

A method for the determination of polybrominated diphenyl ethers (PBDEs) and polybrominated biphenyls (PBBs) in water samples is proposed. The method involving stir bar sorptive extraction (SBSE) and thermal desorption followed by gas chromatography coupled with mass spectrometry was optimised using statistical design of experiments. In the first place, the influence of different polydimethylsiloxane stir bars was studied. A Plackett–Burman design was chosen to estimate the influence of five factors on the efficiency of the SBSE process: desorption time (5–10 min), desorption temperature (250–300 °C), desorption flow (50–100 mL min⁻¹), cryofocusing temperature (-130 to 40 °C) and vent pressure (0–12.8 psi). Afterwards, two central composite designs were used to find the optimal process settings that were applied to the optimisation of both desorption and extraction efficiency. In the case of the desorption parameters, long desorption times (10 min) and desorption flows lower than 70 mL min^-1 yielded the best signals for the majority of compounds. However, different behaviour among the analytes was observed for the vent pressure and we decided to fix it at an intermediate value (7 psi). In the case of extraction parameters, the sample volume and the addition of NaCl did not have a significant effect, while the addition of methanol yielded better extraction responses. Remarkable recovery (82–106%) and repeatability (less than 18%) were attained. Furthermore, excellent regression coefficients (r ² = 0.991–0.999) and low detection limits (1.1–6.0 ng L⁻¹) were also achieved for the congeners studied. The proposed method was applied to the analyses of PBDEs and PBBs in waters from the Basque Country, Spain.     

Slurry sampling electrothermal vaporization inductively coupled plasma mass spectrometry for the determination of Cr, Cd and Pb in plastics

Ultrasonic slurry sampling electrothermal vaporization dynamic reaction cell inductively coupled plasma mass spectrometry (USS–ETV–DRC–ICP–MS) for the determination of Cr, Cd and Pb in several plastic samples, using NH₄NO₃ as the modifier, is described. The influences of the instrumental operating conditions and the slurry preparation technique on the ion signals are investigated. A reduction in the intensity of the background at signals corresponding to chromium masses (arising from matrix elements) was achieved by using NH₃ as the reaction cell gas in the DRC. The method was applied to determine Cr, Cd and Pb in two polystyrene (PS) samples and a polyvinyl chloride (PVC) sample using two different calibration methods, namely standard addition and isotope dilution. The results were in good agreement with those for digested samples analyzed by ultrasonic nebulization DRC–ICP–MS. The precision between sample replicates was better than 17% with the USS–ETV–DRC–ICP–MS method. The method detection limits, estimated from standard addition curves, were about 6–9, 1–2 and 8–11 ng g⁻¹ for Cr, Cd and Pb, respectively, in the original plastic samples.     

Quantification of human and veterinary antibiotics in water and sediment using SPE/LC/MS/MS

An analytical method was developed and tested for four different groups of veterinary antibiotics in both river water and sediment matrices. Solid phase extraction (SPE) was used to enrich and to clean up the aqueous sample. Also, Mcllvaine and ammonium hydroxide buffer solutions were used to extract the compounds from the sediment matrix. High performance liquid chromatography (HPLC) equipped with tandem mass spectrometry (MS/MS) was used to separate and quantify the samples. The range of recoveries (in percent) for tetracyclines (TCs), sulfonamides (SAs), macrolides (MLs), and ionophore polyethers (IPs) in the water matrix were 102.2–124.8, 76.6–124.3, 89.5–114.7, 82.7–117.5 with 1–13 (%) of relative standard deviation respectively with three different concentrations. For sediment, the percent recovery ranges were 32.8–114.8, 62.4–108.9, 53.4–128.4 and 51.3–105.4 for TCs, SAs, MLs and IPs, respectively. The relative standard deviation ranged from 16 – 27 (%) over three different concentrations. The limit of quantification (LOQ) was determined by two different methods and calculated to be in the range of 0.01–0.04 μg/l and 0.3–2.5 μg/kg for TCs, SAs, and MLs in water and sediment, respectively. For IPs, the LOQ was 0.001–0.003 μg/l in river water and 0.4–3.6 μg/kg for sediment. The sediment concentration measured in an agriculture-influenced river was much higher than in the overlying water matrix, indicating a high degree of sediment partitioning for these compounds.     

Novel approaches to the analysis of steroid estrogens in river sediments

A wide range of estrogenic contaminants has been detected in the aquatic environment. Among these, natural and synthetic steroid estrogens, typically present in municipal sewage-treatment plant (STP) effluents, are the most potent. In this study a new GC–MS method has been developed for direct analysis of five major steroid estrogens (estrone, 17β-estradiol, 17α-ethinylestradiol, dienestrol, and diethylstilbestrol) in river sediments. Four GC–MS systems used for analysis of underivatized analytes in purified extracts were compared. Relatively low detection limits (1.5–5 ng g⁻¹ dried sediment) and good repeatability of GC splitless injection (RSD 1–2%) were achieved by use of a system combining low-pressure gas chromatography with a single-quadrupole mass analyzer (LP-GC–MS). Use of orthogonal gas chromatography (GC×GC) hyphenated with high-speed time-of-flight mass spectrometry (HSTOF-MS) enabled not only significantly better resolution of target analytes, and their unequivocal identification, but also further improvement (decrease) of their detection limits. In addition to these outcomes, use of this unique GC×GC–TOF-MS system enabled identification of several other non-target chemicals, including pharmaceutical steroids, present in purified sediment extracts.     

Simultaneous Determination of Acteoside, Astragaloside IV and Icariside-I in the Traditional Chinese Medicinal Preparation Shenbao by HPLC–MS

A liquid chromatography–electrospray (ES)–mass spectrometric method for the simultaneous determination of Acteoside, Astragaloside IV and Icariside-I in the Traditional Chinese Medicinal Preparation Shenbao tablets is described. The samples were separated on an Alltima C₁₈ column by linear gradient elution using water–acetonitrile as the mobile phase. Some operational parameters of the ESI interface were optimized. The method is linear over the range of 0.1–10μg mL⁻¹ for Acteoside, Astragaloside IV, and 0.03–3μg mL⁻¹ for Icariside-I. The method has a precision (%CV) of <20%, and an accuracy (%RE) of < ± 10%. It can be used as a complementary method for quality control of Shenbao Tablets while HPLC–UV can be used for the other main components (Icariin, Icariside-II, Psoralen, Isopsoralen, and Osthol).     

Volcano correlations for the reactivity of surface-confined cobalt N<Subscript>4</Subscript>-macrocyclics for the electrocatalytic oxidation of 2-mercaptoacetate

We have investigated the electrocatalytic activity of several substituted and unsubstituted cobalt–phthalocyanines of substituted tetraphenyl porphyrins and of vitamin B₁₂, for the electro-oxidation of 2-mercaptoacetate, with the complexes pre-adsorbed on a pyrolytic graphite electrode. Several N4-macrocyclic were used to have a wide variety of Co(II)/(I) formal potentials. The electrocatalytic activity, measured as current at constant potential, increases with the Co(II)/(I) redox potential for porphyrins as Co–pentafluorotetraphenylporphyrin < Co–tetrasulfonatotetraphenylporphyrin < Co-2,2′,2″,2‴tetra-aminotetraphenylporphyrin and decreases for cobalt phthalocyanines as Co-3,4-octaethylhexyloxyphthalocyanine > Co–octamethoxyphthalocyanine > Co–tetranitrophthalocyanine Co–tetraaminophthalocyanine > Co–unsubstituted phthalocyanine > Co–tetrasulfonatophthalocyanine > Co–perfluorinated phthalocyanine. Vitamin B₁₂ exhibits the maximum activity. A correlation of log I (at constant potential) versus the Co(II)/(I) formal potential of the catalysts gives a volcano curve. This clearly shows that the search for better catalysts for this reaction point to those N₄-macrocyclic complexes with Co(II)/(I) formal potentials close to −0.84 V versus SCE, which correspond to an optimum situation for the interaction of the thiol with the active site. Dedicated to Prof. Dr. Teresa Iwasita on the occasion of her 65th birthday in recognition of her numerous contributions to interfacial electrochemistry.     

Immobilization of soil mercury by colloidal sulphur in the laboratory experiment

The results of the laboratory pot experiments on soil mercury (Hg) immobilisation with a non-toxic and price-reasonable agent — colloidal sulphur (S) water suspension, are presented. It was shown that fertilisation with small agrochemical doses of colloidal S reduces excess Hg effectively as follows: in interstitial waters by a factor 2 – 12 times for total Hg, and 22– 680 times for “reactive” Hg; in stems and leaves of oats – 7 – 22 times; and in moss bags, reflecting soil Hg degassing, 7 – 15 times, for the most heavily Hg-spiked soils. The results obtained allowed to conclude that the immobilization of Hg occurs through Hg binding to the newly formed S-bearing functional groups in humic acids and/or sulphides.      

Validation of SPME-GC and HS-GC procedures for the determination of selected solvent residues in edible oil matrices

The validation process – in accordance with the recommendation of the International Conference on Harmonization – was performed in order to define and determine the application of the developed procedures for the determination of solvent residues (hexane, benzene, toluene and chlorinated hydrocarbons – trichloromethane, 1,1,1-trichloroethane, tetrachloromethane, trichloroethene, tetrachloroethene) in oil samples. For extraction and preconcentration of analytes, two simple sample preparation techniques – static headspace analysis (HSA) and solid phase microextraction (SPME) – have been used. Gas chromatography with a flame ionization detector (FID) and electron capture detector (ECD) was applied for the final determination. A critical comparison of developed procedures was conducted considering the values of: limits of detection, concentration ranges, repeatability and uncertainty. The linearity issue was described in details due to the broad measurement ranges of the proposed procedures.     

Resonance light-scattering method for the determination of BSA and HSA with sodium dodecyl benzene sulfonate or sodium lauryl sulfate

A new resonance light-scattering (RLS) assay of proteins such as bovine serum albumin (BSA) and human serum albumin (HSA) is presented. In the medium of phosphoric acid (pH=2.6), the weak RLS of sodium dodecyl benzene sulfonate (SDBS) or sodium lauryl sulfate (SLS) can be greatly enhanced by proteins, owing to interaction between the protein and the anionic surfactant and formation of an associate. The RLS intensity of the SDBS–protein system is stronger than that of the SLS–protein system under same experimental conditions. It is considered that the synergistic resonance caused by the absorption of both protein and SDBS could produce strong RLS, while absorption of protein only in the SLS system could cause relatively weak RLS. The enhanced intensity of RLS is proportional to the concentration of the protein. If SDBS is used as the probe the linear range is 7.5×10^–9–1.5×10^–5 g mL^–1 for BSA and 1.0×10^–8–1.0×10^–5 g mL^–1 for HSA. The detection limits are 1.8 and 2.8 ng mL^–1, respectively. When SLS is used as the probe the linear range is 2.0×10^–8–1.0×10^–5 g mL^–1 and 2.5×10^–8–1.0×10^–5 g mL^–1 for BSA and HSA, respectively, and the detection limits are 12.8 and 21.6 ng mL^–1, respectively. The biological mimics samples are synthetic concoctions of BSA and HSA with some interferents. In these samples, the concentration of interferents is higher than the concentration normally existing in organisms. The samples were determined satisfactorily.