Mesoporous Silica Layer: Preparation and Opportunity

Periodic mesoporous silicas, which were prepared from silica‐surfactant mesostructured materials, have been investigated for a wide range of application due to their very large surface area, high porosity, pore size uniformity and variation, periodic pore arrangement and possible pore surface modification, after the pioneering papers on the formation of mesoporous silicas (MCM‐41 and FSM‐16). Morphosyntheses from such macroscopic morphologies as bulk monolith and film to nanoscopic ones, nanoparticles and their stable suspension, make mesoporous materials more attractive for applications and detailed characterization. Mesoporous silicas have been studied initially for such applications as adsorbent and catalyst, and more recently, optical, electronic, and bio‐related applications have been investigated. This review summarizes the studies on mesoporous silica film to highlight the present status and future of the preparation, characterization and application of the mesoporous silica film.     

介孔硅材料及其负载型催化剂去除挥发性有机物的最新进展

介孔硅材料由于具有大的比表面积,均一的孔结构和大的孔径,常被用于分离、吸附和催化等领域.本文综述了近年来国内外介孔硅材料及其负载型催化剂去除各类挥发性有机物(VOCs)的研究进展,主要包括烃类、甲醇、甲醛、丙酮、苯、甲苯、萘、乙酸乙酯等.讨论了介孔硅材料的结构对VOCs吸附过程的影响;介绍了不同催化剂消除各类VOCs的催化性能及反应机理,并重点评述了甲苯在不同催化剂上的研究进展.分析结果表明,介孔硅材料的表面环境、孔道结构以及宏观形貌是影响VOCs分子在介孔硅材料上吸附的主要因素;贵金属催化剂的应用需要提高其抗中毒性以及降低成本;过渡金属的研究应着重于研发高活性的负载型过渡金属复合氧化物催化剂.最后对国内外介孔硅材料及其负载型催化剂的发展进行了展望,今后催化剂的设计可以从“氧化硅载体”和“介孔孔道”两个方面展开,这将为设计合适的催化剂处理各类VOCs污染物提供一定参考.     

功能化介孔材料在环境领域的应用研究进展

介孔材料是一种具有较大比表面积和高度有序孔道结构的材料,而功能化介孔材料是将介孔材料改性而使其具有不同的功能。这种材料由于具有极好的吸附和催化性能而被广泛应用于环境领域中。本文总结了功能化介孔材料的制备方法,包括引入官能团、掺杂金属和酸改性;探讨分析了几种制备方法下的功能化介孔材料的特点和应用前景;重点介绍了功能化介孔材料在吸附重金属、有机污染物、染料、CO2以及催化领域的研究进展;最后展望了未来功能化介孔材料的应用前景和发展趋势,以期为功能化介孔材料的发展提供参考和指明方向。     

功能化有序介孔二氧化硅材料在分析样品前处理中的应用

功能化有序介孔二氧化硅材料具有均一可调的介孔孔径、规则的孔道、稳定的骨架结构、易于修饰的内表面和较高的比表面积、高的吸附容量等特性,可用于生物、医药、环境样品等复杂基体中痕量分析物的高选择性分离与富集,因此在样品前处理中的应用特别引人瞩目。文中简要介绍了功能化有序介孔二氧化硅材料的制备方法,综述了功能化有序介孔二氧化硅材料在分离富集金属离子、有机污染物以及生物大分子样品前处理中的应用进展。     

Synthesis of Superacid‐Functionalized Mesoporous Nanocages with Tunable Pore Diameters and Their Application in the Synthesis of Coumarins

Here we demonstrate for the first time the preparation of a triflic acid (TFA)‐functionalized mesoporous nanocage with tunable pore diameters by the wet impregnation method. The obtained materials have been unambiguously characterized by XRD, N₂ adsorption, FTIR spectroscopy, and NH₃ temperature‐programmed desorption (TPD). From the characterization results, it has been found that the TFA molecules are firmly anchored on the surface of the mesoporous supports without affecting their acidity. We also demonstrate the effect of the pore and cage diameter of the KIT‐5 supports on the loading of TFA molecules inside the pore channels. It has been found that the total acidity of the materials increases with an increase in the TFA loading on the support, whereas the acidity of the materials decreases with an increase in the pore diameter of the support. The acidity of the TFA‐functionalized mesoporous nanocages is much higher than that of the zeolites and metal‐substituted mesoporous acidic catalysts. The TFA‐functionalized materials have also been employed as the catalysts for the synthesis of 7‐hydroxy‐4‐methylcoumarin by means of the Pechmann reaction under solvent‐free conditions. It has been found that the catalytic activity of the TFA‐functionalized KIT‐5 is much higher than that of zeolites and metal‐substituted mesoporous catalytic materials in the synthesis of coumarin derivatives. The stability of the catalyst is extremely good and can be reused several times without much loss of activity in the above reaction.     

Mesoporous Nickel–Alumina Catalysts for Hydrogen Production by Steam Reforming of Liquefied Natural Gas (LNG)

Recent progress on the mesoporous nickel–alumina catalysts for hydrogen production by steam reforming of liquefied natural gas (LNG) was reported in this review. A number of mesoporous nickel–alumina composite catalysts were prepared by a single-step surfactant-templating method using cationic, anionic, and non-ionic surfactant as structure-directing agents for use in hydrogen production by steam reforming of LNG. For comparison, nickel catalysts supported on mesoporous aluminas were also prepared by an impregnation method. The effect of preparation method and surfactant identity on physicochemical properties and catalytic activities of mesoporous nickel–alumina catalysts in the steam reforming of LNG was investigated. Regardless of preparation method and surfactant identity, nickel oxide species were finely dispersed on the surface of mesoporous nickel–alumina catalysts through the formation of surface nickel aluminate phase. However, nickel dispersion and nickel surface area of mesoporous nickel–alumina catalysts were strongly affected by the preparation method and surfactant identity. It was found that nickel surface area of mesoporous nickel–alumina catalyst served as one of the important factors determining the catalytic performance in hydrogen production by steam reforming of LNG. Among the catalysts tested, a mesoporous nickel–alumina composite catalyst prepared by a single-step non-ionic surfactant-templating method exhibited the best catalytic performance due to its highest nickel surface area.     

Rational Design of Mesoporous Metals and Related Nanomaterials by a Soft‐Template Approach

We review recent developments in the preparation of mesoporous metals and related metal‐based nanomaterials. Among the many types of mesoporous materials, mesoporous metals hold promise for a wide range of potential applications, such as in electronic devices, magnetic recording media, and metal catalysts, owing to their metallic frameworks. Mesoporous metals with highly ordered networks and narrow pore‐size distributions have traditionally been produced by using mesoporous silica as a hard template. This method involves the formation of an original template followed by deposition of metals within the mesopores and subsequent removal of the template. Another synthetic method is the direct‐template approach from lyotropic liquid crystals (LLCs) made of nonionic surfactants at high concentrations. Direct‐template synthesis creates a novel avenue for the production of mesoporous metals as well as related metal‐based nanomaterials. Many mesoporous metals have been prepared by the chemical or electrochemical reduction of metal salts dissolved in aqueous LLC domains. As a soft template, LLCs are more versatile and therefore more advantageous than hard templates. It is possible to produce various nanostructures (e.g., lamellar, 2D hexagonal (p6mm), and 3D cubic (Ia d)), nanoparticles, and nanotubes simply by controlling the composition of the reaction bath.     

Functionalization of mesoporous carbon with superbasic MgO nanoparticles for the efficient synthesis of sulfinamides

Highly basic MgO nanoparticles with different sizes have been successfully immobilized over mesoporous carbon with different pore diameters by a simple wet-impregnation method. The prepared catalysts have been characterized by various sophisticated techniques, such as XRD, nitrogen adsorption, electron energy loss spectroscopy, high-resolution TEM, X-ray photoelectron spectroscopy, and the temperature-programmed desorption of CO(2). XRD results reveal that the mesostructure of the support is retained even after the huge loading of MgO nanoparticles inside the mesochannels of the support. It is also demonstrated that the particle size and dispersion of the MgO nanoparticles on the support can be finely controlled by the simple adjustment of the textural parameters of the supports. Among the support materials studied, mesoporous carbon with the largest pore diameter and large pore volume offered highly crystalline small-size cubic-phase MgO nanoparticles with a high dispersion. The basicity of the MgO-supported mesoporous carbons can also be controlled by simply changing the loading of the MgO and the pore diameter of the support. These materials have been employed as heterogeneous catalysts for the first time in the selective synthesis of sulfinamides. Among the catalysts investigated, the support with the large pore diameter and high loading of MgO showed the highest activity with an excellent yield of sulfinamides. The catalyst also showed much higher activity than the pristine MgO nanoparticles. The effects of the reaction parameters, including the solvents and reaction temperature, and textural parameters of the supports in the activity of the catalyst have also been demonstrated. Most importantly, the catalyst was found to be highly stable, showing excellent activity even after the third cycle of reaction.     

Support Modification of Supported Nickel Catalysts for Hydrogen Production by Auto-thermal Reforming of Ethanol

Recent progress on support modification of supported nickel catalysts for hydrogen production by auto-thermal reforming of ethanol was reported in this review. Nickel catalysts supported on various materials, including metal oxides and metal oxide-stabilized mesoporous zirconias, were prepared by an incipient wetness impregnation method for use in hydrogen production by auto-thermal reforming of ethanol. Various experimental measurements such as NH₃-TPD (temperature-programmed desorption) and TPR (temperature-programmed reduction) were carried out to elucidate the different catalytic performance of supported nickel catalysts. It was revealed that acid property of supporting materials served as one of the important factors determining the catalytic performance. Hydrogen yield over nickel catalysts supported on metal oxides showed a volcano-shaped curve with respect to acidity of the supports. Among the catalysts tested, Ni/ZrO₂ catalyst with an intermediate acidity exhibited a superior catalytic performance. It was also observed that reducibility of nickel catalysts supported on metal oxide-stabilized mesoporous zirconias played a key role in determining the catalytic performance in the auto-thermal reforming of ethanol for hydrogen production. Hydrogen yield over nickel catalysts supported on metal oxide-stabilized zirconias increased with increasing reducibility of the catalysts (with decreasing TPR peak temperature of the catalysts).     

介孔Co3O4-CeO2复合氧化物的制备及在CO选择性氧化中的应用

以硝酸钴和硝酸铈为前驱物，SBA-15为硬模板，利用双溶剂法制备了Co3O4-CeO2介孔复合氧化物，通过X-射线衍射、N2吸脱附测试、程序升温还原和透射电子显微镜等技术对活性组分及载体进行了表征，并且与浸渍法和共沉淀法所制备的催化剂进行了对比分析。结果表明，相比于浸渍法和共沉淀法，采用双溶剂法制备的介孔Co3O4-CeO2复合氧化物具有均匀的介孔结构、较小的颗粒尺寸、较大的比表面积和较高的活性组分分散度。此外，CO氧化脱除评价显示与常规的共沉淀法和浸渍法所制备的催化剂相比该介孔复合氧化物具有较高的反应活性和选择性，其高活性主要归因于较高的比表面积和活性组分的高分散度。     

Hydrothermally Stable and Catalytically Active Ordered Mesoporous Materials Assembled from Preformed Zeolite Nanoclusters

Microporous zeolites are widely used commercial catalysts, but their applications are intrinsically limited by their small channel diameters. Recent progress in solving this is used to ordered mesoporous materials such as MCM-41, HMS and SBA-15. These mesoporous materials have pore diameters of 30–60 Å and exhibit catalytic properties for the catalytic conversion of bulky reactants, but unfortunately, when compared with microporous zeolites, the catalytic activity and hydrothermal stability are relatively low, which severely hinders their practical applications. The relatively low catalytic activity and hydrothermal stability can be attributed to the amorphous nature of the mesoporous walls. We review here that the assembly of preformed zeolite precursors with surfactants can synthesize a series of ordered mesoporous materials, which include (1) strongly acidic and hydrothermally stable mesoporous aluminosilicates synthesized in alkaline media; (2) strongly acidic and hydrothermally stable mesoporous aluminosilicates synthesized in strongly acidic media; (3) hydrothermally stable mesoporous titanosilicates with catalytically active titanium species in oxidations; (4) hydrothermally stable mesoporous ferrisilicates. This work would open a door for the industrial application of mesoporous materials as catalysts for large molecules.     

介孔分子筛研究新进展

介孔分子筛材料作为催化剂或催化剂载体为有机大分子参与反应提供了有利的空间构型和择形活性中心,在石油加工工业中具有潜在的应用优势。但由于介孔分子筛材料的水热稳定性比较低,且酸性较弱,极大地影响了其在催化领域中的广泛应用。本文综述了近年硅基介孔分子筛的改性研究进展,重点讨论了在提高介孔分子筛酸性和水热稳定性方面的研究工作。     

中孔分子筛负载钴催化剂制备及其在费-托合成中的催化性能

 以HMS,MCM－41,AlHMS和ZrO2／HMS等中孔分子筛为载体,采用孔体积浸渍法制备了系列负载型钴催化剂．XRD测定结果表明,Co氧化物完全分散于分子筛内表面,载体仍保持中孔分子筛的特征;低温N2吸附测定结果表明,表面负载金属钴后,分子筛的比表面积和孔体积下降,孔径减小,孔壁增厚．比较了不同中孔分子筛负载Co催化剂在F－T反应中的催化性能,以短程六角对称的HMS为载体,有利于F－T反应中的链增长,烃类产物主要为微晶蜡;以ZrO2／HMS为载体可抑制CH4的生成,提高C5＋的选择性．     

金属改性硅基介孔材料及其加氢脱硫研究进展

硅基介孔材料具有孔径分布均一、孔道结构独特、比表面积高等优点,其在石油产品加氢脱硫(HDS)催化剂载体中的应用成为近年来研究的热点。但在实际应用过程中硅基介孔材料的耐硫性差、路径选择性低等局限性也逐渐显现出来,针对此类问题,近年来的研究集中在硅基材料的改性工作上。本文综述了近年来金属改性的硅基介孔材料应用于油品加氢脱硫的研究现状,重点讨论了铝、钛、锆等金属的引入对硅基介孔材料基本结构(比表面积、孔容和孔径)、酸性和HDS催化活性的影响。分析总结了经金属改性的硅基介孔材料作为HDS催化剂载体的优点和不足,并展望了其未来的应用前景。     

Chemical Immobilization of Heteropolyacid Catalyst on Inorganic Mesoporous Material for use as an Oxidation Catalyst

Recent progress on the chemical immobilization of heteropolyacid (HPA) catalyst on inorganic mesoporous material is reported in this review. Mesostructured cellular foam silica, mesoporous carbon, and nitrogen-containing mesoporous carbon were used as supporting materials. The mesoporous materials were modified to have a positive charge, and thus, to provide sites for the immobilization of HPA catalyst. By taking advantage of the overall negative charge of heteropolyanion, the HPA catalyst was chemically immobilized on the surface-modified mesoporous material as a charge-compensating component. Characterization results showed that the HPA catalyst was finely and molecularly dispersed on the surface of mesoporous material via strong chemical immobilization, and that the pore structure of mesoporous material was still maintained even after the immobilization of HPA catalyst. The supported HPA catalysts were applied to the model vapor-phase ethanol conversion, 2-propanol conversion, and methacrolein oxidation reactions. The supported HPA catalyst showed a better oxidation catalytic activity than the unsupported HPA catalyst in the model reactions. The enhanced oxidation catalytic performance of the supported HPA catalyst was attributed to the finely dispersed HPA catalyst, which was chemically immobilized on the positive site of mesoporous material by sacrificing its proton (Brönsted acid site). The HPA catalyst chemically immobilized on mesoporous material served as an excellent oxidation catalyst.     

Textural manipulation of mesoporous materials for hosting of metallic nanocatalysts

The preparation and stabilization of nanoparticles are becoming very crucial issues in the field of so-called "nanocatalysis". Recent developments in supramolecular self-assembled porous materials have opened a new way to get nanoparticles hosted in the channels of such materials. In this paper, a new approach towards monodisperse and thermally stable metal nanoparticles by confining them in ordered mesoporous materials is presented, and three aspects are illustrated. Firstly, the recent progress in the functional control of mesoporous materials will be briefly introduced, and the rational tuning of the textures, pore size, and pore length is demonstrated by controlling supramolecular self-assembly behavior. A novel synthesis of short-pore mesoporous materials is emphasized for their easy mass transfer in both biomolecule absorption and the facile assembly of metal nanocomposites within their pore channels. In the second part, the different routes for encapsulating monodisperse nanoparticles inside channels of porous materials are discussed, which mainly includes the ion-exchange/conventional incipient wetness impregnation, in situ encapsulation routes, organometallic methodologies, and surface functionalization schemes. A facile in situ autoreduction route is highlighted to get monodisperse metal nanoparticles with tunable sizes inside the channels of mesoporous silica. Finally, confinement of mesoporous materials is demonstrated to improve the thermal stability of monodisperse metal nanoparticles catalysts and a special emphasis will be focused on the stabilization of the metal nanoparticles with a low Tammann temperature. Several catalytic reactions concerning the catalysis of nanoparticles will be presented. These uniform nanochannels, which confine monodisperse and stable metal nanoparticles catalysts, are of great importance in the exploration of size-dependent catalytic chemistry and further understanding the nature of catalytic reactions.     

Photoprocesses in mesoporous silicas prepared by a supramolecular templating approach

Mesoporous solids derived from inorganic–surfactant mesostructured materials have been investigated extensively from both fundamental and practical viewpoints owing to their unusually high surface area and porosity, ordered pore arrangements, pore size uniformity, as well as possible surface engineering. These characteristic features of the mesoporous solids have motivated research to apply them practically. This class of materials was originally expected to find applications as adsorbents and catalysts, while other advanced materials applications such as in optics/electronics became a field of interest after their successful fabrication in controlled morphology. This review article summarizes the studies on the photochemistry and photophysics of guest species occluded in mesoporous silicas in order to highlight the characteristic features of the mesostructured and mesoporous solids and their potential for optical applications.     

介孔炭的孔结构对其负载的Ru基氨合成催化剂性能的影响

采用模板法合成了介孔炭(MC),研究了其孔结构对其负载的Ru基氨合成催化剂Ba-Ru-K/MC性能的影响,采用N₂吸附脱附、扫描电镜和透射电镜等手段对介孔炭的孔结构进行了表征.研究发现,介孔炭载体的孔结构取决于模板剂的用量,当SiO₂/C质量比为1.0时,所制介孔炭比表面积最大.介孔炭负载的Ba-Ru-K催化剂活性与其介孔比表面积相关.在425℃,10MPa和10000h^-1条件下,合成氨的反应速率为139mmol/(g_cat·h).     

多孔材料负载金催化剂的制备与应用*

本文综述了微孔材料和介孔材料负载型金催化剂的制备、表征与应用研究的最新进展,从多孔载体的选择（氧化物、微孔分子筛、介孔氧化物、介孔分子筛和介孔碳材料）、金的最新负载方法（沉积-沉淀法、溶胶-凝胶法、原位法/一步法和化学气相沉积法）与表征及其催化性能（一氧化碳低温氧化、氢气/氧气直接合成过氧化氢、直接合成环氧丙烷和有机物的选择性氧化）等方面详尽地评述了微孔材料和介孔材料负载型金催化剂研究概况。同时,提出了多孔材料负载金催化剂存在的一些问题,并展望了其研究和发展的方向。     

介孔SiO2的改性及对诺维信漆酶的交联固定化

采用十六烷基三甲基溴化铵(CTAB)为模板剂,四乙氧基硅烷(正硅酸乙酯,TEOS)为硅源,硝酸为催化剂来制备介孔SiO2,并采用后嫁接法对介孔SiO2进行氨基化改性。利用红外光谱(IR),X射线粉末衍射(XRD),差热-热重分析(DTA-TG),扫描电镜(SEM),元素分析,微电泳法及N2吸附-脱附方法对改性前后的产物进行表征。结果表明氨基已成功嫁接到介孔SiO2孔道中,改性后的介孔SiO2有序度有所下降,但仍为介孔材料;改性之后介孔材料的孔径、比表面积、孔体积均变小。等电点由原来的2.74变为4.75。本文还以氨基修饰的介孔SiO2为载体,通过交联剂戊二醛固定诺维信(Novozymes)工业级漆酶,并采用正交设计法对固定化条件进行了优化。研究表明漆酶经固定化后,其操作稳定性比游离酶高。