Cationic Ti(IV) and neutral Ti(III) titanocene-phosphinoaryloxide frustrated Lewis pairs: hydrogen activation and catalytic amine-borane dehydrogenation

Titanium-phosphorus frustrated Lewis pairs (FLPs) based on titanocene-phosphinoaryloxide complexes have been synthesised. The cationic titanium(IV) complex [Cp(2)TiOC(6)H(4)P((t)Bu)(2)][B(C(6)F(5))(4)] 2 reacts with hydrogen to yield the reduced titanium(III) complex [Cp(2)TiOC(6)H(4)PH((t)Bu)(2)][B(C(6)F(5))(4)] 5. The titanium(III)-phosphorus FLP [Cp(2)TiOC(6)H(4)P((t)Bu)(2)] 6 has been synthesised either by chemical reduction of [Cp(2)Ti(Cl)OC(6)H(4)P((t)Bu)(2)] 1 with [CoCp*(2)] or by reaction of [Cp(2)Ti{N(SiMe(3))(2)}] with 2-C(6)H(4)(OH){P((t)Bu)(2)}. Both 2 and 6 catalyse the dehydrogenation of Me(2)HN·BH(3).     

Sulfur-bridged early-late heterobimetallics synthesized by incorporation of titanium,vanadium, and molybdenum into bis(hydrosulfido) templates of group 9 metals

Reactions of the bis(hydrosulfido) complexes [Cp*Rh(SH)(2)(PMe(3))] (1a; Cp* = eta(5)-C(5)Me(5)) with [CpTiCl(3)] (Cp = eta(5)-C(5)H(5)) and [TiCl(4)(thf)(2)] in the presence of triethylamine led to the formation of the sulfido-bridged titanium-rhodium complexes [Cp*Rh(PMe(3))(micro(2)-S)(2)TiClCp] (2a) and [Cp*Rh(PMe(3))(micro2-S)(2)TiCl(2)] (3a), respectively. Complex 3a and its iridium analogue 3b were further converted into the bis(acetylacetonato) complexes [Cp*M(PMe(3))(micro(2)-S)(2)Ti(acac)(2)] (4a, M = Rh; 4b, M = Ir) upon treatment with acetylacetone. The hydrosulfido complexes 1a and [Cp*Ir(SH)(2)(PMe(3))] (1b) also reacted with [VCl(3)(thf)(3)] and [Mo(CO)(4)(nbd)] (nbd = 2,5-norbornadiene) to afford the cationic sulfido-bridged VM2 complexes [(Cp*M(PMe(3))(micro2-S)(2))2V](+) (5a(+), M = Rh; 5b(+), M = Ir) and the hydrosulfido-bridged MoM complexes [Cp*M(PMe(3))(micro2-SH)(2)Mo(CO)(4)] (6a, M = Rh; 6b, M = Ir), respectively.     

Syntheses and characterization of titanium(IV) and titanium(III) complexes with (2-dimethylphosphino)ethane-1-thiolate and (3-dimethylphosphino)propane-1-thiolate as ligands

Reactions of Cp(2)TiCl(2) (Cp = eta(5)-cyclopentadienide) with 2 or 1 equiv of hybrid P-S ligands (L), (CH(3))(2)P(CH(2))(n)()S(-) (n = 2, dmpet; n = 3, dmppt), produced new dicyclopentadienyltitanium(IV) complexes with L, Cp(2)Ti(L-kappaS)(2) (1, L = dmpet; 2, L = dmppt) and [Cp(2)Ti(L-kappa(2)S,P)]BPh(4) (3, L = dmpet; 4, L = dmppt). The Ti(III) complexes, Cp(2)Ti(L-kappa(2)S,P) (5, L = dmpet; 6, L = dmppt), were prepared by the reaction of Cp(2)Ti(eta(3)-C(3)H(5)) with 1 equiv of L. The structures of complexes 1-6 were confirmed by X-ray diffraction analyses. It was found that complexes 3 and 5 were isostructural around Ti(IV) and Ti(III) centers: the Ti(IV)-S bond length in 3 (2.3498(9) A) is shorter by 0.14 A than Ti(III)-S in 5 (2.4877(7) A), while Ti(IV)-P (2.534(1) A) was merely 0.05 A shorter than Ti(III)-P (2.5844(7) A). The redox potential between 3 and 5 in acetonitrile was -1.14 V vs the ferricinium/ferrocene couple. A heterobimetallic complex that has the frame of complex 1, [Cp(2)Ti(dmpet)(2)Cu]PF(6) (7), was also isolated and structurally characterized: the Ti-Cu distance (2.95(1) A) was shorter than that in [Cp(2)Ti(SC(2)H(4)PPh(2))(2)Cu]BF(4), previously reported by White and Stephan. Structural characterization was also carried out for CpTi(dmpet-kappaS)(2)(dmpet-kappa(2)S,P) (8) and CpTiCl(2)(dmppt-kappa(2)S,P) (9), which were obtained by the reactions of Cp(or Cp)TiCl(3) (Cp = eta(5)-C(5)Me(5)(-)) with n equiv (n = 1-3) of L. The mutual site-exchange reaction between phosphorus atoms on a coordinated dmpet in the kappa(2)S,P mode and on two other coordinated dmpet's in the kappaS mode within complex 8 was analyzed by the variable-temperature (31)P[(1)H] dynamic NMR method. The kinetic parameters for this process, k(ex)(298) = 1.9 x 10(5) s(-)(1), DeltaH = 48 kJ mol(-)(1), and DeltaS = 17 J mol(-)(1) K(-)(1), as well as the rather long Ti(IV)-P distance (2.652(1) A), indicate the fluxional nature of the coordination geometry in complex 8.     

A new titanium building block for early-late heterometallic complexes; preparation of a new tetrameric metallomacrocycle by self assembly

The new titanium dicarboxylate complex Cp*TiMe(OOC)2py (2) [Cp*=eta5-C5Me5; (OOC)2py = 2,6-pyridinedicarboxylate] has been synthesized. The reaction of complex 2 with water renders [Cp*Ti(OOC)2py]2O (3). The molecular structure of 3 has been studied by X-ray diffraction methods. Complex 2 reacts with isocyanides to yield the respective iminoacyl derivatives Cp*Ti(eta2-MeCNR)(OOC)2py [R=tBu (4), 2,6-dimethylphenyl (xylyl) (5)]. The molecular structure of complex4 has been established by X-ray diffraction. Compound 2 has been employed as a new building block for the preparation of new early-late heterometallic compounds; it reacts with [M(mu-OH)(COD)]2 (M = Rh, Ir) to give the corresponding tetranuclear metallomacrocycle derivatives [Cp*Ti{(OOC)(2)py}(mu-O)M(COD)]2 [M = Rh (6); Ir (7)]. The molecular structure of 6 has been established by X-ray diffraction.     

Highly Strained Heterometallacycles of Group 4 Metallocenes with Bis(diphenylphosphino)amide Ligands

A study regarding coordination chemistry of the bis(diphenylphosphino)amide ligand Ph(2) P-N-PPh(2) at Group?4 metallocenes is presented herein. Coordination of N,N-bis(diphenylphosphino)amine (1) to [(Cp(2) TiCl)(2) ] (Cp=η(5) -cyclopentadienyl) generated [Cp(2) Ti(Cl)P(Ph(2) )N(H)PPh(2) ] (2). The heterometallacyclic complex [Cp(2) Ti(κ(2) -P,P-Ph(2) P-N-PPh(2) )] (3?Ti) can be prepared by reaction of 2 with n-butyllithium as well as from the reaction of the known titanocene-alkyne complex [Cp(2) Ti(η(2) -Me(3) SiC(2) SiMe(3) )] with the amine 1. Reactions of the lithium amide [(thf)(3) Li{N(PPh(2) )(2) }] with [Cp(2) MCl(2) ] (M=Zr, Hf) yielded the corresponding zirconocene and hafnocene complexes [Cp(2) M(Cl){κ(2) -N,P-N(PPh(2) )(2) }] (4?Zr and 4?Hf). Reduction of 4?Zr with magnesium gave the highly strained heterometallacycle [Cp(2) Zr(κ(2) -P,P-Ph(2) P-N-PPh(2) )] (3?Zr). Complexes 2, 3?Ti, 4?Hf, and 3?Zr were characterized by X-ray crystallography. The structures and bondings of all complexes were investigated by DFT calculations.     

Catalytic dehydrogenation of dimethylamine borane by group 4 metallocene alkyne complexes and homoleptic amido compounds

Dehydrogenation of Me(2)NH·BH(3) (1) by group 4 metallocene alkyne complexes of the type Cp(2)M(L)(η(2)-Me(3)SiC(2)SiMe(3)) [Cp = η(5)-cyclopentadienyl; M = Ti, no L (2Ti); M = Zr, L = pyridine (2Zr)] and group 4 metal amido complexes of the type M(NMe(2))(4) [M = Ti (8Ti), Zr (8Zr)] is presented.     

Stereoselective oxidative additions of iodoalkanes and activated alkynes to a sulfido-bridged heterotrinuclear early-late (TiIr2) complex

The reactions of the early-late trinuclear complex [Cp(acac)Ti(mu(3)-S)(2)Ir(2)(CO)(4)] (1) with electrophiles have been found to occur on the iridium atoms with no other involvement of the early metal than in electronic effects. The reaction with iodine gave two isomers of the diiridium(II) complex [Cp(acac)Ti(mu(3)-S)(2)Ir(2)I(2)(CO)(4)] differentiated by the relative positions of the iodo ligands on the iridium atoms. The reactions with iodoalkanes are highly stereoselective to give one sole isomer of formula [Cp(acac)Ti(mu(3)-S)(2)Ir(2)(R)(I)(CO)(4)] (R = CH(3), CH(2)I, CHI(2)) with a carbonyl and the iodo ligand trans to the metal-metal bond. The structures of the symmetrical isomer with the iodo ligands trans to the metal-metal bond and that of the compound with R = CHI(2) have been solved by X-ray diffraction methods. The stereoselectivity of the oxidative-addition reactions can be rationalized assuming the influence of steric effects of the groups on the titanium center and a radical-like mechanism. Reactions of 1 with the activated acetylenes, dimethylacetylenedicarboxylate and methylacetylenecarboxylate, gave the complexes [Cp(acac)Ti(mu(3)-S)(2)Ir(2)(mu-eta(1)-RC=CCO(2)Me)(CO)(4)] (R = CO(2)Me, H), with the alkyne bridging the two iridium centers as a cis-dimetalated olefin and the C=C bond parallel to the Ir-Ir axis. Two isomers resulting from the disposition of the alkyne along the Ir-Ir vector were observed in solution for the compound with the nonsymmetrical alkyne (R = H), while only one was observed for the compound with R = CO(2)Me. An exchange, fast in the NMR time scale, of the apical with the equatorial carbonyls occured in the complexes [Cp(acac)Ti(mu(3)-S)(2)Ir(2)(mu-eta(1)-RC=CCO(2)Me)(CO)(4)], producing their equivalence in the (13)C((1)H) NMR spectra.     

Reductions by titanium(II) as catalyzed by titanium(IV)

The cobalt(III) complexes, [(NH3)5CoBr]2+ and [(NH3)5CoI]2+ are reduced by Ti(II) solutions containing Ti(IV), generating nearly linear (zero-order) profiles that become curved only during the last few percent of reaction. Other Co(III)-Ti(II) systems exhibit the usual exponential traces with rates proportional to [Co(III)]. Observed kinetics of the biphasic catalyzed Ti(II)-Co(III)Br and Ti(II)-Co(III)I reactions support the reaction sequence: [Ti(II)(H20)n]2+ + [Ti(IV)F5]- (k1)<==>(k -1) [Ti(II)(H2O)(n-1)]2+ + [(H2O)Ti(IV)F5]-, [Ti(II)(H2O)(n-1)]2+ + Co(III) (k2)--> Ti(III) + Co(II) with rates determined mainly by the slow Ti(IV)-Ti(II) ligand exchange (k1 = 9 x 10(-3) M(-1) s(-1) at 22 degrees C). Computer simulations of the catalyzed Ti(II)-Co(III) reaction in perchlorate-triflate media yield relative rates for reduction by the proposed active [Ti(II)(H2O)(n-1)]2+ intermediate; k(Br)/k(I) = 8.     

Nonclassical titanocene silyl hydrides

The titanocene silyl hydride complexes [Ti(Cp)2(PMe3)(H)(SiR3)] [SiR3=SiMePhCl (6), SiPh2Cl (7), SiMeCl2 (8), SiCl3 (9)] were prepared by HSiR3 addition to [Ti(Cp)2(PMe3)2] and were studied by NMR and IR spectroscopy, X-ray diffraction (for 6, 8, and 9), and DFT calculations. Spectroscopic and structural data established that these complexes exhibit nonclassical Ti-H-Si-Cl interligand hypervalent interactions. In particular, the observation of silicon-hydride coupling constants J(Si,H) in 6-9 in the range 22-40 Hz, the signs of which we found to be negative for 8 and 9, is conclusive evidence of the presence of a direct Si-H bond. The analogous reaction of [Ti(Cp)2(PMe3)2] with HSi(OEt)3 does not afford the expected classical silyl hydride complex [Ti(Cp)2(PMe3)(H)[Si(OEt)3]], and instead NMR-silent titanium (apparently TiIII) complex(es) and the silane redistribution product Si(OEt)4 are formed. The structural data and DFT calculations for the compounds [Ti(Cp)2(PMe3)(H)(SiR3)] show that the strength of interligand hypervalent interactions in the chlorosilyl complexes decreases as the number of chloro groups on silicon increases. However, in the absence of an Si-bound electron-withdrawing group trans to the Si-H moiety, a silane sigma complex is formed, characterized by a long Ti-Si bond of 2.658 A and short Si-H contact of 1.840 A in the model complex [Ti(Cp)2(PMe3)(H)(SiMe3)]. Both the silane sigma complexes and silyl hydride complexes with interligand hypervalent interactions exhibit bond paths between the silicon and hydride atoms in Atoms in Molecules (AIM) studies. To date a classical titanocene phosphane silyl hydride complex without any Si-H interaction has not been observed, and therefore titanocene silyl hydrides are, depending on the nature of the R groups on Si, either silane sigma complexes or compounds with an interligand hypervalent interaction.     

Synthesis, structural characterization, catalytic properties, and theoretical study of compounds containing an Al-O-M (M = Ti, Hf) core

Two single oxygen-bridged heterobimetallic oxides of Al(III) with group 4 metals (Ti, Hf) have been prepared. The reaction of LAlMeOH (1) [L = CH(N(Ar)(CMe))2, Ar = 2,6-iPr2C6H3] with dimethylmetallocenes of Ti and Hf in toluene (80 degrees C) and ether (room temperature), respectively, resulted in the formation of LAl(Me)(mu-O)M(Me)Cp2 [M = Ti (2), Hf (3)] in moderate to good yield. Compounds 2 and 3 were characterized by elemental analysis, IR, NMR (1H and 13C), EI-MS, and single-crystal X-ray structural analysis. Furthermore, compound 2 showed good catalytic activity in ethylene and styrene homopolymerization, while compound 3 is less active in ethylene polymerization. The styrene polymerization yields atactic polystyrene.     

First isolation of fully delocalized mixed-valent imido-bridged [Ti2]7+ complexes by one-electron reduction of [(C5R5)TiCl]2(μ-NAr)2

Mixed-valent imido-bridged dinuclear titanium complexes, [Cp(2)Co][{(C(5)R(5))TiCl}(2)(μ-NAr)(2)] (R = H, Me; Ar = 3,5-(CF(3))(2)C(6)H(3)), were prepared by one-electron reduction of the corresponding [(C(5)R(5))TiCl](2)(μ-NAr)(2). One unpaired electron is delocalized in the central Ti(μ-NR)(2)Ti core as the first example of a fully delocalized mixed-valent imido-bridged [Ti(2)](7+) species.     

A homoleptic hydrotris(methimazolyl)borate complex of titanium

The reaction of [Ti(2)(micro-Cl)(2)(thf)(2)(eta-C(8)H(8))(2)] with Na[HB(mt)(3)] (mt = methimazolyl) provides the unusual salt [Ti{HB(mt)(3)}(2)][TiCl(4)(thf)(2)], the cation of which features homoleptic Ti(III)S(6) coordination.     

Revelation of the nature of the reducing species in titanocene halide-promoted reductions

The fundamental nature of Ti(III) complexes generated in tetrahydrofuran by reduction of Cp(2)TiCl(2) has been clarified by means of cyclic voltammetry and kinetic measurements. While the electrochemical reduction of Cp(2)TiCl(2) leads to the formation of Cp(2)TiCl(2)(-), the use of metals such as Zn, Al, or Mn as reductants affords Cp(2)TiCl and (Cp(2)TiCl)(2) in a mixture having a dimerization equilibrium constant of 3 x 10(3) M(-)(1), independent of the metal used. Thus, we find it unlikely that the trinuclear complexes or ionic clusters known from the solid phase should be present in solution as previously suggested. The standard potentials determined for the redox couples Cp(2)TiCl(2)/Cp(2)TiCl(2)(-), (Cp(2)TiCl)(2)(+)/(Cp(2)TiCl)(2), Cp(2)TiCl(+)/Cp(2)TiCl, and Cp(2)Ti(2+)/Cp(2)Ti(+) increase in the order listed. However, the reactivity of the different Ti(III) complexes is assessed as (Cp(2)TiCl)(2) greater, similar Cp(2)TiCl approximately Cp(2)Ti(+) > Cp(2)TiCl(2)(-) in their reactions with benzyl chloride and benzaldehyde. None of the reactions proceed by an outer-sphere electron transfer pathway, and clearly the inner-sphere character is much higher in the case of Cp(2)Ti(+) than for (Cp(2)TiCl)(2), Cp(2)TiCl, and in particular Cp(2)TiCl(2)(-). As to the electron acceptor, the inner-sphere character increases, going from benzyl chloride to benzaldehyde, and it is suggested that the chlorine atom in benzyl chloride and the oxygen atom in benzaldehyde may function as bridges between the reactants in the transition state.     

Lanthanide(III)/actinide(III) differentiation in the cerium and uranium complexes [M(C5Me5)2(L)]0,+ (L=2,2'-bipyridine, 2,2':6',2''-terpyridine): structural, magnetic, and reactivity studies

Treatment of [Ce(Cp*)(2)I] or [U(Cp*)(2)I(py)] with 1 mol equivalent of bipy (Cp*=C(5)Me(5); bipy=2,2'-bipyridine) in THF gave the adducts [M(Cp*)(2)I(bipy)] (M=Ce (1 a), M=U (1 b)), which were transformed into [M(Cp*)(2)(bipy)] (M=Ce (2 a), M=U (2 b)) by Na(Hg) reduction. The crystal structures of 1 a and 1 b show, by comparing the U-N and Ce-N distances and the variations in the C-C and C-N bond lengths within the bidentate ligand, that the extent of donation of electron density into the LUMO of bipy is more important in the actinide than in the lanthanide compound. Reaction of [Ce(Cp*)(2)I] or [U(Cp*)(2)I(py)] with 1 mol equivalent of terpy (terpy=2,2':6',2'-terpyridine) in THF afforded the adducts [M(Cp*)(2)(terpy)]I (M=Ce (3 a), M=U (3 b)), which were reduced to the neutral complexes [M(Cp*)(2)(terpy)] (M=Ce (4 a), M=U (4 b)) by sodium amalgam. The complexes [M(Cp*)(2)(terpy)][M(Cp*)(2)I(2)] (M=Ce (5 a), M=U (5 b)) were prepared from a 2:1 mixture of [M(Cp*)(2)I] and terpy. The rapid and reversible electron-transfer reactions between 3 and 4 in solution were revealed by (1)H NMR spectroscopy. The spectrum of 5 b is identical to that of the 1:1 mixture of [U(Cp*)(2)I(py)] and 3 b, or [U(Cp*)(2)I(2)] and 4 b. The magnetic data for 3 and 4 are consistent with trivalent cerium and uranium species, with the formulation [M(III)(Cp*)(2)(terpy(*-))] for 4 a and 4 b, in which spins on the individual units are uncoupled at 300 K and antiferromagnetically coupled at low temperature. Comparison of the crystal structures of 3 b, 4 b, and 5 b with those of 3 a and the previously reported ytterbium complex [Yb(Cp*)(2)(terpy)] shows that the U-N distances are much shorter, by 0.2 A, than those expected from a purely ionic bonding model. This difference should reflect the presence of stronger electron transfer between the metal and the terpy ligand in the actinide compounds. This feature is also supported by the small but systematic structural variations within the terdentate ligands, which strongly suggest that the LUMO of terpy is more filled in the actinide than in the lanthanide complexes and that the canonical forms [U(IV)(Cp*)(2)(terpy(*-))]I and [U(IV)(Cp*)(2)(terpy(2-))] contribute significantly to the true structures of 3 b and 4 b, respectively. This assumption was confirmed by the reactions of complexes 3 and 4 with the H(.) and H(+) donor reagents Ph(3)SnH and NEt(3)HBPh(4), which led to clear differentiation of the cerium and uranium complexes. No reaction was observed between 3 a and Ph(3)SnH, while the uranium counterpart 3 b was transformed in pyridine into the uranium(IV) compound [U(Cp*)(2){NC(5)H(4)(py)(2)}]I (6), where NC(5)H(4)(py)(2) is the 2,6-dipyridyl(hydro-4-pyridyl) ligand. Complex 6 was further hydrogenated to [U(Cp*)(2){NC(5)H(8)(py)(2)}]I (7) by an excess of Ph(3)SnH in refluxing pyridine. Treatment of 4 a with NEt(3)HBPh(4) led to oxidation of the terpy(*-) ligand and formation of [Ce(Cp*)(2)(terpy)]BPh(4), whereas similar reaction with 4 b afforded [U(Cp*)(2){NC(5)H(4)(py)(2)}]BPh(4) (6'). The crystal structures of 6, 6' and 7 were determined.     

Terminal Alkynes in the Coordination Sphere of Titanocene Complexes – Elementary Steps in Catalytic Dimerizations and Oligomerizations of Alkynes

The titanocene acetylene complex [Cp*₂Ti(η²-Me₃SiC≡CSiMe₃)] ( 14 ) reacts with 1-alkynes such as phenylacetylene ( 15 a ), 1-hexyne ( 15 b ), 1-dodecyne ( 15 c ) and trimethylsilylacetylene ( 15 d ) by ligand exchange and proton shift, to yield exclusively the 1-alkenyltitanocene acetylides [Cp*₂Ti(CH=CHR)(C≡CR)] ( 21 ) (R = Ph ( 21 a ), CH₃(CH₂)₃ ( 21 b ), CH₃(CH₂)₉ ( 21 c ), SiMe₃ ( 21 d )). The X-ray structure of 21 a is presented. In reaction of acetylene HC≡CH ( 15 e ) with 14 other products are formed. However, no intermediates, like [Cp*₂Ti(η²-RC≡CH)] ( 17 ), [Cp*₂Ti(H)C≡CR] ( 17 ) or [Cp*₂Ti=C=CHR] ( 22 ) in reactions of 14 with 15 are detectable. On the other hand, a stable titanocenehydride [Cp*₂Ti(H)OCH₃] ( 23 ) is obtained by oxidative addition of CH₃OH with Cp*₂Ti, generated from 14 .     

Synthesis and decarbonylation reactions of the triiron phosphinidene complex [Fe3Cp3(μ-H)(μ3-PPh)(CO)4]: easy cleavage and formation of P-H and Fe-Fe bonds

The binuclear phosphine complex [Fe(2)Cp(2)(μ-CO)(2)(CO)(PH(2)Ph)] (Cp = η(5)-C(5)H(5)) reacted with the acetonitrile adduct [Fe(2)Cp(2)(μ-CO)(2)(CO)(NCMe)] in dichloromethane at 293 K to give the trinuclear hydride-phosphinidene derivative [Fe(3)Cp(3)(μ-H)(μ(3)-PPh)(CO)(4)] as a mixture of cis,anti and trans isomers (Fe-Fe = 2.7217(6) ? for the cis,anti isomer). In contrast, photochemical treatment of the phosphine complex with [Fe(2)Cp(2)(CO)(4)] gave the phosphide-bridged complex trans-[Fe(3)Cp(3)(μ-PHPh)(μ-CO)(2)(CO)(3)] as the major product, along with small amounts of the binuclear hydride-phosphide complexes [Fe(2)Cp(2)(μ-H)(μ-PHPh)(CO)(2)] (cis and trans isomers), which are more selectively prepared from [Fe(2)Cp(2)(CO)(4)] and PH(2)Ph at 388 K. The photochemical decarbonylation of either of the mentioned triiron compounds led reversibly to three different products depending on the reaction conditions: (a) the 48-electron phosphinidene cluster [Fe(3)Cp(3)(μ-H)(μ(3)-PPh)(μ-CO)(2)] (Fe-Fe = 2.592(2)-2.718(2) ?); (b) the 50-electron complex [Fe(3)Cp(3)(μ-H)(μ(3)-PPh)(μ-CO)(CO)(2)], also having carbonyl- and hydride-bridged metal-metal bonds (Fe-Fe = 2.6177(3) and 2.7611(4) ?, respectively); and (c) the 48-electron phosphide cluster [Fe(3)Cp(3)(μ-PHPh)(μ(3)-CO)(μ-CO)(2)], an isomer of the latter phosphinidene complex now having three intermetallic bonds (Fe-Fe = 2.5332(8)-2.6158(8) ?).     

Hydrogen Generation by Water Reduction with [Cp*2Ti(OTf)]: Identifying Elemental Mechanistic Steps by Combined In Situ FTIR and In Situ EPR Spectroscopy Supported by DFT Calculations

A detailed mechanism of hydrogen production by reduction of water with decamethyltitanocene triflate [Cp*₂Ti^III(OTf)] has been derived for the first time, based on a comprehensive in situ spectroscopic study including EPR and ATR‐FTIR spectroscopy supported by DFT calculations. It is demonstrated that two H₂O molecules coordinate to [Cp*₂Ti^III(OTf)] subsequently forming [Cp₂*Ti^III(H₂O)(OTf)] and [Cp*Ti^III(H₂O)₂(OTf)]. Triflate stabilizes the water ligands by hydrogen bonding. Liberation of hydrogen proceeds only from the diaqua complex [Cp*Ti^III(H₂O)₂(OTf)] and involves, most probably, abstraction and recombination of two H atoms from two molecules of [Cp*Ti^III(H₂O)₂(OTf)] in close vicinity, which is driven by the formation of a strong covalent Ti? OH bond in the resulting final product [Cp*₂Ti^IV(OTf)(OH)].     

Ytterbocenes as one- and two-electron reductants in their reactions with diazadienes: YbIII mixed-ligand bent-sandwich complexes containing a dianion of diazabutadiene

Ytterbocene [Yb(C(5)MeH(4))(2)(thf)(2)] reacts with diazabutadiene 2,6-iPr(2)C(6)H(3)-N=CH-CH=N-C(6)H(3)iPr(2)-2,6 (DAD) as a one-electron reductant to afford a bis(cyclopentadienyl) Yb(III) derivative containing a DAD radical anion [Yb(C(5)MeH(4))(2)(dad(-.))]. However, ytterbocenes [YbCp*(2)(thf)(2)] (Cp*=C(5)Me(5), C(5)Me(4)H) coordinated by sterically demanding cyclopentadienyl ligands act as two-electron reductants in their reactions with DAD. These reactions occur by abstraction of one Cp* ring and result in the formation of novel Yb(III) mixed-ligand bent-sandwich complexes, [YbCp*(dad)(thf)], in which the dianion of DAD has an uncommon terminal eta(4)-coordination to the ytterbium atom. The variable-temperature magnetic measurements of complex [Yb(C(5)Me(5))(dad)(thf)] suggest the existence of redox tautomerism for this compound.     

Half-sandwich bis(tetramethylaluminate) complexes of the rare-earth metals: synthesis, structural chemistry, and performance in isoprene polymerization

The protonolysis reaction of [Ln(AlMe(4))(3)] with various substituted cyclopentadienyl derivatives HCp(R) gives access to a series of half-sandwich complexes [Ln(AlMe(4))(2)(Cp(R))]. Whereas bis(tetramethylaluminate) complexes with [1,3-(Me(3)Si)(2)C(5)H(3)] and [C(5)Me(4)SiMe(3)] ancillary ligands form easily at ambient temperature for the entire Ln(III) cation size range (Ln=Lu, Y, Sm, Nd, La), exchange with the less reactive [1,2,4-(Me(3)C)(3)C(5)H(3)] was only obtained at elevated temperatures and for the larger metal centers Sm, Nd, and La. X-ray structure analyses of seven representative complexes of the type [Ln(AlMe(4))(2)(Cp(R))] reveal a similar distinct [AlMe(4)] coordination (one eta(2), one bent eta(2)). Treatment with Me(2)AlCl leads to [AlMe(4)] --> [Cl] exchange and, depending on the Al/Ln ratio and the Cp(R) ligand, varying amounts of partially and fully exchanged products [{Ln(AlMe(4))(mu-Cl)(Cp(R))}(2)] and [{Ln(mu-Cl)(2)(Cp(R))}(n)], respectively, have been identified. Complexes [{Y(AlMe(4))(mu-Cl)(C(5)Me(4)SiMe(3))}(2)] and [{Nd(AlMe(4))(mu-Cl){1,2,4-(Me(3)C)(3)C(5)H(2)}}(2)] have been characterized by X-ray structure analysis. All of the chlorinated half-sandwich complexes are inactive in isoprene polymerization. However, activation of the complexes [Ln(AlMe(4))(2)(Cp(R))] with boron-containing cocatalysts, such as [Ph(3)C][B(C(6)F(5))(4)], [PhNMe(2)H][B(C(6)F(5))(4)], or B(C(6)F(5))(3), produces initiators for the fabrication of trans-1,4-polyisoprene. The choice of rare-earth metal cation size, Cp(R) ancillary ligand, and type of boron cocatalyst crucially affects the polymerization performance, including activity, catalyst efficiency, living character, and polymer stereoregularity. The highest stereoselectivities were observed for the precatalyst/cocatalyst systems [La(AlMe(4))(2)(C(5)Me(4)SiMe(3))]/B(C(6)F(5))(3) (trans-1,4 content: 95.6 %, M(w)/M(n)=1.26) and [La(AlMe(4))(2)(C(5)Me(5))]/B(C(6)F(5))(3) (trans-1,4 content: 99.5 %, M(w)/M(n)=1.18).     

Reaction of BH4- with [Mo2Cp2(mu-SMe)n] species to give tetrahydroborato, hydrido or dimetallaborane compounds: control of product by ancillary ligands

The reaction of mono- or dichloro-dimolybdenum(III) complexes [Mo2Cp2(mu-SMe)2(mu-Cl)(mu-Y)] (Cp=eta5-C5H5; 1, Y=SMe; 2, Y=PPh2; 3, Y=Cl) with NaBH4 at room temperature gave in high yields tetrahydroborato (8), hydrido (9) or metallaborane (12) complexes depending on the ancillary ligands. The correct formulation of derivatives and has been unambigously determined by X-ray diffraction methods. That of the hydrido compound 9 has been established in solution by NMR analysis and confirmed by an X-ray study of the mu-azavinylidene derivative [Mo2Cp2(mu-SMe)2(mu-PPh2)(mu-N=CHMe)] (10) obtained from the insertion of acetonitrile into the Mo-H bond of 9. Reaction of NaBH4 with nitrile derivatives, [Mo2Cp2(mu-SMe)4-n(CH3CN)2n]n+(5, n=1; 6 n=2), afforded the tetrahydroborato compound 8, together with a mu-azavinylidene species [Mo2Cp2(mu-SMe)3(mu-N=CHMe)](14), when n=1, and the metallaborane complex 12, together with a mixed borohydrato-azavinylidene derivative [Mo2Cp2(mu-SMe)2(mu-BH4)(mu-N=CHMe)] (13), when n=2. The molecular structures of these complexes have been confirmed by X-ray analysis. Preparations of some of the starting complexes (3 and 4) are also described, as are the molecular structures of the precursors [Mo2Cp2(mu-SMe)2(mu-X)(mu-Y)] (1, X/Y=Cl/SMe; 2, X/Y=Cl/PPh2; 4, X/Y=SMe/PPh2).