Reactions of copper(II)-phenol systems with O2: models for TPQ biosynthesis in copper amine oxidases

Copper(II) complexes supported by a series of phenol-containing bis(pyridin-2-ylmethyl)amine N(3) ligands (denoted as L(o)H, L(m)H, and L(p)H) have been synthesized, and their O(2) reactivity has been examined in detail to gain mechanistic insights into the biosynthesis of the TPQ cofactor (2,4,5-trihydroxyphenylalaninequinone, TOPA quinone) in copper-containing amine oxidases. The copper(II) complex of L(o)H (ortho-phenol derivative) involves a direct phenolate to copper(II) coordination and exhibits almost no reactivity toward O(2) at 60 °C in CH(3)OH. On the other hand, the copper(II) complex of L(m)H (meta-phenol derivative), which does not involve direct coordinative interaction between the phenol moiety and the copper(II) ion, reacts with O(2) in the presence of triethylamine as a base to give a methoxy-substituted para-quinone derivative under the same conditions. The product structure has been established by detailed nuclear magnetic resonance (NMR), infrared (IR) spectroscopy, and electrospray ionization-mass spectroscopy (ESI-MS) (including (18)O-labeling experiment) analyses. Density functional theory predicts that the reaction involves (i) intramolecular electron transfer from the deprotonated phenol (phenolate) to copper(II) to generate a copper(I)-phenoxyl radical; (ii) the addition of O(2) to this intermediate, resulting in an end-on copper(II) superoxide; (iii) electrophilic substitution of the phenolic radical to give a copper(II)-alkylperoxo intermediate; (iv) O-O bond cleavage concomitant with a proton migration, giving a para-quinone derivative; and (v) Michael addition of methoxide from copper(II) to the para-quinone ring and subsequent O(2) oxidation. This reaction sequence is similar to that proposed for the biosynthetic pathway leading to the TPQ cofactor in the enzymatic system. The generated para-quinone derivative can act as a turnover catalyst for aerobic oxidation of benzylamine to N-benzylidene benzylamine. Another type of copper(II)-phenol complex with an L(p)H ligand (para-phenol derivative) also reacts with O(2) under the same experimental conditions. However, the product of this reaction is a keto-alcohol derivative, the structure of which is qualitatively different from that of the cofactor. These results unambiguously demonstrate that the steric relationship between the phenol moiety and the supported copper(II) ion is decisive in the conversion of active-site tyrosine residues to the TPQ cofactor.     

Fine-tuning of copper(I)-dioxygen reactivity by 2-(2-pyridyl)ethylamine bidentate ligands

Copper(I)-dioxygen reactivity has been examined using a series of 2-(2-pyridyl)ethylamine bidentate ligands (R1)Py1(R2,R3). The bidentate ligand with the methyl substituent on the pyridine nucleus (Me)Py1(Et,Bz) (N-benzyl-N-ethyl-2-(6-methylpyridin-2-yl)ethylamine) predominantly provided a (mu-eta(2):eta(2)-peroxo)dicopper(II) complex, while the bidentate ligand without the 6-methyl group (H)Py1(Et,Bz) (N-benzyl-N-ethyl-2-(2-pyridyl)ethylamine) afforded a bis(mu-oxo)dicopper(III) complex under the same experimental conditions. Both Cu(2)O(2) complexes gradually decompose, leading to oxidative N-dealkylation reaction of the benzyl group. Detailed kinetic analysis has revealed that the bis(mu-oxo)dicopper(III) complex is the common reactive intermediate in both cases and that O[bond]O bond homolysis of the peroxo complex is the rate-determining step in the former case with (Me)Py1(Et,Bz). On the other hand, the copper(I) complex supported by the bidentate ligand with the smallest N-alkyl group ((H)Py1(Me,Me), N,N-dimethyl-2-(2-pyridyl)ethylamine) reacts with molecular oxygen in a 3:1 ratio in acetone at a low temperature to give a mixed-valence trinuclear copper(II, II, III) complex with two mu(3)-oxo bridges, the UV-vis spectrum of which is very close to that of an active oxygen intermediate of lacase. Detailed spectroscopic analysis on the oxygenation reaction at different concentrations has indicated that a bis(mu-oxo)dicopper(III) complex is the precursor for the formation of trinuclear copper complex. In the reaction with 2,4-di-tert-butylphenol (DBP), the trinuclear copper(II, II, III) complex acts as a two-electron oxidant to produce an equimolar amount of the C[bond]C coupling dimer of DBP (3,5,3',5'-tetra-tert-butyl-biphenyl-2,2'-diol) and a bis(mu-hydroxo)dicopper(II) complex. Kinetic analysis has shown that the reaction consists of two distinct steps, where the first step involves a binding of DBP to the trinuclear complex to give a certain intermediate that further reacts with the second molecule of DBP to give another intermediate, from which the final products are released. Steric and/or electronic effects of the 6-methyl group and the N-alkyl substituents of the bidentate ligands on the copper(I)-dioxygen reactivity have been discussed.     

Determination of trace amounts of copper with 4-(2-pyridylazo)resorcinol by solid phase spectrophotometry

A determination method for traces of copper by Solid-Phase Spectrophotometry (SPS) has been developed. It is based on the fixation of copper(II) as 4-(2-pyridylazo)resorcinol complex on a styrene-divinylbenzene anion-exchange resin. The resin phase absorbances at 525 and 800 nm are measured directly, and the determination of copper (with a RSD of 1.8%) is possible in the range of 0.3–4.5 μg L^?1. The method has been applied to the determination of copper in different samples, i.e. mushrooms, tea, drugs and waters.     

Carbon-halogen bond activation mechanism by copper(I) complexes of (2-pyridyl)alkylamine ligands

The reaction of p-substituted benzyl halides ((Y)BnX; X = Cl, Br, and I; Y = p-substituent, OMe, t-Bu, Me, H, F, Cl, and NO(2)) and copper(I) complexes supported by a series of (2-pyridyl)alkylamine ligands has been investigated to shed light on the mechanism of copper(I) complex mediated carbon-halogen bond activation, including ligand effects on the redox reactivity of copper(I) complexes which are relevant to the chemistry. For both the tridentate ligand (Phe)L(Pym2) [N,N-bis(2-pyridylmethyl)-2-phenylethylamine] and tetradentate ligand TMPA [tris(2-pyridylmethyl)amine] complexes, the C-C coupling reaction of benzyl halides proceeded smoothly to give corresponding 1,2-diphenylethane derivatives and copper(II)-halide complex products. Kinetic analysis revealed that the reaction obeys second-order kinetics both on the copper complex and the substrate; rate = k[Cu](2)[(Y)BnX](2). A reaction mechanism involving a dinuclear copper(III)-halide organometallic intermediate is proposed, on the basis of the kinetic results, including observed electronic effects of p-substituents (Hammett plot) and the rate dependence on the BDE (bond dissociation energy) of the C-X bond, as well as the ligand effects.     

Adsorption voltammetry of the copper(II) 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol complex

The voltammetric determination of copper(II), based on adsorptive accumulation of the Cu(II)-2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (S-Br-PADAP) complex on a hanging mercury drop electrode, is reported. The complex can be accumulated at the electrode at constant potential in 0.1M ammonium nitrate/ammonia buffer solution, and its reduction wave observed by scanning the potential in the negative direction, in the differential pulse mode. The calibration graph for copper is linear over the range 0.05-0.5muM, with accumulation for 5 min at -0.20 V. The adsorption of the complex is discussed and compared with that of copper complexes with several other pyridylazo derivatives.     

Copper(II) and copper(III) complexes of pyrrole-appended oxacarbaporphyrin

The reaction of an O-confused porphyrin with a pendant pyrrole 4 and copper(II) acetate yields an organocopper(III) diamagnetic complex 4-Cu(III) substituted at the C(3) position by the pyrrole and H. The transformation of 4-Cu(III), performed in aerobic conditions, gave a rare copper(II) organometallic compound 6-Cu(II). In the course of this process, the tetrahedral-trigonal rearrangement originated at the C(3) atom but effects the whole structure. The electron paramagnetic resonance spectroscopic features correspond to a copper(II) oxidation state. A crystallographic analysis of 6-Cu(II) confirmed the formation of a direct metal-C bond [Cu(II)-C 1.939(4) A]. It was found that the Cu(II) complex of O-confused oxaporphyrin is sensitive to oxidative conditions. The degradation of 6-Cu(II) to yield copper(II) tripyrrinone complexes has been observed, which was considered as a peculiar case of dioxygen activation in a porphyrin-like environment. This process is accompanied by regioselective oxygenation at the inner C to form the 2-oxa-3-(2'-pyrrolyl)-21-hydroxycarbaporphyrinatocopper(II) complex ((pyrr)OCPO)CuII (8). The reaction of 6-Cu(II) with hydrogen peroxide, performed under heterophasic conditions, resulted in quantitative regioselective hydroxylation centered at the internal C(21) atom, also producing 8. Treatment of 8 with acid results in demetalation to form the nonaromatic 21-hydroxy O-confused porphyrin derivative ((pyrr)OCPOH)H (9).     

Mono- and binuclear copper(II) complexes of saccharin with 2-pyridinepropanol synthesis,spectral, thermal and structural characterization

Mono- and binuclear copper(II) saccharinate (sac) complexes containing 2-pyridinepropanol (pypr) have been prepared and characterized by elemental analyses, i.r., u.v.–vis., magnetic measurements and single crystal X-ray diffraction. The copper(II) ion in trans-[Cu(pypr)₂(sac)₂] has –1 site symmetry and is octahedrally coordinated by two bidentate neutral pypr (N, O) and two sac (O) ligands. The binuclear copper(II) complex, [Cu₂(-pypr)₂(sac)₂], is built up around a centre of symmetry and contains two strongly distorted square–planar coordinated copper(II) ions bridged by two alkoxo groups of the deprotonated pypr ligand, which also coordinates to the copper(II) ions through its nitrogen. In contrast to the mononuclear complex, the sac ligands in the binuclear complex is N-coordinated. The binuclear complex exhibits diamagnetic behaviour. The i.r. spectra and thermal decompositions of both complexes are described.     

Mixed-ligand complex formation of (2,2′,2″-terpyridine)copper(I) and (2,2′2″-terpyridine)copper(II) with some sulfur-containing amino acids

Summary Mixed-ligand complex formation of copper(I) with 2,2,2-terpyridine (terpy) and various biologically significant sulfurcontaining amino acids, L [L = cysteine, penicillamine,N-acetylcysteine andN-acetylpenicillamine] was investigated. WithN-acetylcysteine andN-acetylpenicillamine, copper(I) complexes [Cu(terpy)L]HCl have been isolated and characterised. The amino acid in each case bonds to the copper(I) through the sulfur atom only. These complexes are readily oxidised to the corresponding copper(II) complexes which contain a Cu^II-S(mercaptide) bond as demonstrated by the (S)Cu^II LMCT at 420 nm. The e.p.r. and electronic spectroscopic results are consistent with a distorted octahedral structure. Reactions of copper(I) with terpy and cysteine/ penicillamine in weakly acidic medium produce complexes containing two different copper(II) centres. From a strongly acidic medium, a binary copper(I) terpyridine complex is obtained instead and is shown from i.r. spectral absorptions to contain a protonated pyridyl ring.     

Structure and dioxygen-reactivity of copper(I) complexes supported by bis(6-methylpyridin-2-ylmethyl)amine tridentate ligands

The structure and dioxygen-reactivity of copper(I) complexes R supported by N,N-bis(6-methylpyridin-2-ylmethyl)amine tridentate ligands L2R[R (N-alkyl substituent)=-CH2Ph (Bn), -CH2CH2Ph (Phe) and -CH2CHPh2(PhePh)] have been examined and compared with those of copper(I) complex (Phe) of N,N-bis[2-(pyridin-2-yl)ethyl]amine tridentate ligand L1(Phe) and copper(I) complex (Phe) of N,N-bis(pyridin-2-ylmethyl)amine tridentate ligand L3(Phe). Copper(I) complexes (Phe) and (PhePh) exhibited a distorted trigonal pyramidal structure involving a d-pi interaction with an eta1-binding mode between the metal ion and one of the ortho-carbon atoms of the phenyl group of the N-alkyl substituent [-CH2CH2Ph (Phe) and -CH2CHPh2(PhePh)]. The strength of the d-pi interaction in (Phe) and (PhePh) was weaker than that of the d-pi interaction with an eta2-binding mode in (Phe) but stronger than that of the eta1 d-pi interaction in (Phe). Existence of a weak d-pi interaction in (Bn) in solution was also explored, but its binding mode was not clear. Redox potentials of the copper(I) complexes (E1/2) were also affected by the supporting ligand; the order of E1/2 was Phe>R>Phe. Thus, the order of electron-donor ability of the ligand is L1Phe相似文献   

Copper(II) and copper(I) complexes of benzenecarbothioamides

Summary Copper(II) salts react with benzenecarbothioamide(BCTA);N,N-dimethylbencenecarbothioamide (DMBCTA) andN,N-diethylbenzenecarbothioamide (DEBCTA) to give complexes with 11, 21, 31 ligand/metal stoichiometric ratios, and a diamagnetic complex [Cu₂(DEBCTA)Br₄]₂ which appears to contains copper(I). These compounds were characterized by elemental analyses, conductivities measurements, i.r., electronic and e.p.r. studies and magnetic measurements.The results suggest tetrahedral geometry for the copper(II) complexes, a dimeric structure for bromide-DMBCTA and chloride and bromide-BCTA derivatives, and a square pyramid geometry for the CuBr₂-DEBCTA complex. No information is yet available on the coordination geometry of the copper(I) complex.     

Spectral studies and structure of a 2-hydroxyacetophenone 3-hexamethyleneiminyl thiosemicarbazonate(-2) copper(II) complex containing 1,10-phenanthroline

The spectral studies and structure of a ternary complex of copper(II) with 2-hydroxyacetophenone 3-hexamethyliminylthiosemicarbazonate (L(2-)) and 1,10-phenanthroline (phen) are reported. The thiosemicarbazone binds to the metal as a dianionic ONS-donor (L(2-)) ligand, and forms a complex of the stoichiometry [CuLphen]. The copper(II) complex was characterized by IR and UV/Vis spectroscopies, as well as by solid state room-temperature magnetic susceptibility. Spin Hamiltonian and bonding parameters of the compound are calculated from the EPR spectra. Computer simulation of EPR spectrum in DMF at 77 K aided the calculation of magnetic and bonding parameters of the compound. The structure of the compound is solved by single crystal X-ray diffraction. The geometry around copper is distorted square pyramidal.     

Accumulation voltammetry of copper(II) at carbon-paste electrode containing salicylideneamino-2-thiophenol

Summary Accumulation voltammetry of copper(II) was investigated with a carbon-paste electrode containing salicylideneamino-2-thiophenol(SATP). Copper(II) was accumulated as the copper(II)-SATP complex on the electrode without an applied potential by immersing the electrode in 0.01 mol/l acetate buffer (pH 3.8) containing copper(II). The reduction peak of the copper(II)-SATP complex was observed at –0.12 V (vs. SCE) in 0.01 mol/l acetate buffer (pH 3.8) by scanning the potential in a negative direction. The calibration curve for copper(II) was linear in the range of 2×10^–9–1×10^–7 mol/l. Since the accumulation of copper(II) is based on a chemical reaction between copper(II) and SATP, copper(II) was selectively accumulated on the electrode. The presented method was applied to the determination of copper(II) in standard reference materials prepared by the National Institute for Environmental Studies.     

Binuclear copper(II) complexes of 5-nitrosalicylaldehyde N(3)-substituted thiosemicarbazones

Summary Binuclear copper(II) complexes with six 5-nitrosalicylaldehyde N(3)-substituted thiosemicarbazones have been prepared and characterized. I.r., electronic and e.s.r. spectra of the complexes, as well as i.r., electronic, and ¹H-and ¹³C-n.m.r. spectra of the thiosemicarbazones, have been obtained. The crystal structure of a monomeric copper(II) complex of 5-nitrosalicylaldehyde piperidyl-thiosemicarbazone, H₂5NO₂Sapip, grown from DMF solution, has been solved. Neither the thiosemicarbazones or their binuclear copper(II) complexes show growth inhibitory activity against Aspergillus niger, but the copper(II) complexes show some activity against the fungus Paecilomyces variotii.     

Ferromagnetism in malonato-bridged copper(II) complexes. Synthesis,crystal structures,and magnetic properties of [[Cu(H2O)3][Cu(mal)2(H2O)]]n and [[Cu(H2O)4]2[Cu(mal)2(H2O)]][Cu(mal)2(H2O)2][[Cu(H2O)4][Cu(mal)2(H2O)2][(H2mal = malonic acid)

Three malonato-bridged copper(II) complexes of the formulas [[Cu(H2O)3][Cu(C3H2O4)2(H2O)]]n (1), [[Cu(H2O)4]2[Cu(C3H2O4)2(H2O)]] [Cu(C3H2O4)2(H2O)2][[Cu(H2O)4][Cu(C3H2O4)2(H2O)2]] (2), and [Cu(H2O)4][Cu(C3H2O4)2(H2O)2] (3) (C3H2O4 = malonate dianion) have been prepared, and the structures of the two former have been solved by X-ray diffraction methods. The structure of compound 3 was already known. Complex 1 crystallizes in the orthorhombic space group Pcab, Z = 8, with unit cell parameters of a = 10.339(1) A, b = 13.222(2) A, and c = 17.394(4) A. Complex 2 crystallizes in the monoclinic space group P2/c, Z = 4, with unit cell parameters of a = 21.100(4) A, b = 21.088(4) A, c = 14.007(2) A, and beta = 115.93(2) degrees. Complex 1 is a chain compound with a regular alternation of aquabis(malonato)copper(II) and triaquacopper(II) units developing along the z axis. The aquabis(malonato)copper(II) unit acts as a bridging ligand through two slightly different trans-carboxylato groups exhibiting an anti-syn coordination mode. The four carboxylate oxygens, in the basal plane, and the one water molecule, in the apical position, describe a distorted square pyramid around Cu1, whereas the same metal surroundings are observed around Cu2 but with three water molecules and one carboxylate oxygen building the equatorial plane and a carboxylate oxygen from another malonato filling the apical site. Complex 2 is made up of discrete mono-, di-, and trinuclear copper(II) complexes of the formulas [Cu(C3H2O4)2(H2O)2]2-, [[Cu(H2O)4] [Cu(C3H2O4)2(H2O)2]], and [[Cu(H2O)4]2[Cu(C3H2O4)2(H2O)]]2+, respectively, which coexist in a single crystal. The copper environment in the mononuclear unit is that of an elongated octahedron with four carboxylate oxygens building the equatorial plane and two water molecules assuming the axial positions. The neutral dinuclear unit contains two types of copper atoms, one that is six-coordinated, as in the mononuclear entity, and another that is distorted square pyramidal with four water molecules building the basal plane and a carboxylate oxygen in the apical position. The overall structure of this dinuclear entity is nearly identical to that of compound 3. Finally, the cationic trimer consists of an aquabis(malonato)copper(II) complex that acts as a bismonodentate ligand through two cis-carboxylato groups (anti-syn coordination mode) toward two tetraaqua-copper(II) terminal units. The environment of the copper atoms is distorted square pyramidal with four carboxylate oxygens (four water molecules) building the basal plane of the central (terminal) copper atom and a water molecule (a carboxylate oxygen) filling the axial position. The magnetic properties of 1-3 have been investigated in the temperature range 1.9-290 K. Overall, ferromagnetic behavior is observed in the three cases: two weak, alternating intrachain ferromagnetic interactions (J = 3.0 cm-1 and alpha J = 1.9 cm-1 with H = -J sigma i[S2i.S2i-1 + alpha S2i.S2i+1]) occur in 1, whereas the magnetic behavior of 2 is the sum of a magnetically isolated spin doublet and ferromagnetically coupled di- (J3 = 1.8 cm-1 from the magnetic study of the model complex 3) and trinuclear (J = 1.2 cm-1 with H = -J (S1.S2 + S1.S3) copper(II) units. The exchange pathway that accounts for the ferromagnetic coupling, through an anti-syn carboxylato bridge, is discussed in the light of the available magneto-structural data.     

Atmospheric pressure chemical ionization mass spectrometric and visible spectrophotometric studies of copper(I) and copper(II) complexes with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol.

Complexes of copper(II) with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP) formed in aqueous methanol in a wide range of pH (from acidic to alkaline) as well as copper(I)-5-Br-PADAP species formed in methanolic solutions were investigated by spectrophotometry and mass spectrometry. Pseudomolecular and fragment ions created in the atmospheric pressure chemical ionization (APCI) source confirmed the molecular masses of the complexes existing in the solvents and their structures. The structure of the Cu(II) complex with 5-Br-PADAP formed in acidic medium was proposed as CuR(R - H) (where R is the undissociated molecule of the reagent). The binding sites of the two bound reagent molecules were different: in one of them the oxygen atom of the dissociated phenolic group and the nitrogen atom from the azo (-N=N-) group took part in complex formation, whereas in the other only nitrogen atoms from the pyridyl ring and azo group were involved. The complex was stable and could not be reduced to Cu(I) species by use of standard reducing agents (ascorbic acid, hydroxylamine). In alkaline solutions the complex tended to polymerize and precipitated in media containing less than 80% of methanol. The copper(I)-5-Br-PADAP complex was extremely unstable and could be obtained (as a mixture with Cu(II) species) in media free of water or oxygen. For this complex, CuR(2) was proposed as the most probable structure. According to this proposal copper(I) reacted exclusively with nitrogen-containing binding sites and the undissociated phenolic group was not engaged in complex formation. In this system Cu(I)/Cu(II) electron transfer is very rapid, accelerated by a polar environment, e.g. in the presence of water molecules or dissolved oxygen.     

Complexation of copper(II) with 3-(2-hydroxyphenylazo)pentadione-2,4

It is shown that 3-(2-hydroxyphenylazo)pentadione-2,4 (H₂L) can exist in three tautomeric forms (enol-azo, keto-azo, and hydrazo). The effective atomic charges in the tautomeric forms of H₂L are calculated by the Hückel MO LCAO method. The molar fractions and molar absorptivities of the tautomers at different pH are found. The complexation of copper(II) with H₂L is studied by spectrophotometry. Beer’s law is obeyed for 0.51–5.12 μg/mL of copper. The assumed complex structure is given. The effect of foreign ions and masking agents on the complexation is studied. A procedure for the photometric determination of copper(II) in zinc-based alloys is proposed. Original Russian Text ? S.R. Gadzhieva, T.M. Mursalov, K.T. Makhmudov, F.G. Pashaev, F.M. Chyragov, 2006, published in Zhurnal Analiticheskoi Khimii, 2006, Vol. 61, No. 6, pp. 598–603.     

Complex of bis(hexafluoroacetylacetonato)copper(II) with a stable acyclic nitroxide (tert-butyl)(3-keto-2-methylbutyl-2) nitroxyl oxime

A complex of bis(hexafluoroacetylacetonato)copper(II) with a stable acyclic nitroxide (tert-butyl)(3-keto-2-methylbutyl-2)nitroxyl oxime (L), Cu(hfac)₂L, has been synthesized. The structure of the complex was studied by X-ray diffraction analysis. The compound has a molecular structure with chelate coordination of the nitroxide. The tetragonally distorted octahedral environment of the copper(II) ion is formed by the oxygen atoms of the hfac anions and by the nitrogen and oxygen atoms of the oxime and nitroxyl groups of L, respectively. The nitroxyl group lies in the equatorial plane of the octahedron (d_Cu?O=1.907 Å). This type of N?O coordination leads to strong antiferromagnetic exchange interactions between the unpaired electrons of the copper(II) ion and the coordinated nitroxyl group and, as a consequence, to diamagnetism of Cu(hfac)₂L.     

Copper(II)-mediated oxidative transformation of vic-dioxime to furoxan: evidence for a copper(II)-dinitrosoalkene intermediate

The mononuclear copper(II) complex [Cu(H(2)L(1))(2)(H(2)O)](ClO(4))(2) (1) (where H(2)L(1) = 1,10-phenanthroline-5,6-dioxime) reacts with copper(II) perchlorate in acetonitrile at ambient conditions in the presence of triethylamine to afford a copper(II) complex, [Cu(L(3))(2)(H(2)O)](ClO(4))(2) (2a), of 1,10-phenanthroline furoxan. A similar complex [Cu(L(3))(2)Cl](ClO(4)) (2) is isolated from the reaction of H(2)L(1) with copper(II) chloride, triethylamine, and sodium perchlorate in acetonitrile. The two-electron oxidation of the vic-dioxime to furoxan is confirmed from the X-ray single crystal structure of 2. An intermediate species, showing an absorption band at 608 nm, is observed at -20 °C during the conversion of 1 to 2a. A similar blue intermediate is formed during the reaction of [Cu(HDMG)(2)] (H(2)DMG = dimethylglyoxime) with ceric ammonium nitrate, but H(2)DMG treated with ceric ammonium nitrate does not form any intermediate. This suggests the involvement of a copper(II) complex in the intermediate step. The intermediate species is also observed during the two-electron oxidation of other vic-dioximes. On the basis of the spectroscopic evidence and the nature of the final products, the intermediate is proposed to be a mononuclear copper(II) complex ligated by a vic-dioxime and a dinitrosoalkene. The dinitrosoalkene is generated upon two-electron oxidation of the dioxime. The transient blue color of the dioxime-copper(II)-dinitrosoalkene complex may be attributed to the ligand-to-ligand charge transfer transition. The intermediate species slowly decays to the corresponding two-electron oxidized form of vic-dioxime, i.e. furoxan and [Cu(CH(3)CN)(4)](ClO(4)). The formation of two isomeric furoxans derived from the reaction of an asymmetric vic-dioxime, hexane-2,3-dioxime, and copper(II) perchlorate supports the involvement of a dinitrosoalkene species in the intermediate step. In addition, the oxidation of 2,9-dimethyl-1,10-phenanthroline-5,6-dioxime (H(2)L(2)) to the corresponding furoxan and subsequent formation of a copper(I) complex [Cu(L(4))(2)](ClO(4)) (3) (where L(4) = 2,9-dimethyl-1,10-phenanthroline furoxan) are discussed.     

Charge-transfer photochemistry of bis(diethyl-diselenocarbamato)copper(II)

The photochemical reactions of bis(diethyl-diselenocarbamato)copper(II), Cu(Et2dsc)2, complex have been studied in toluene, CH2Cl2, CHCl3 and chloroalkane/EtOH mixed solvents. Charge-transfer irradiation induces intramolecular oxidation of the ligand and reduction of copper(II) to copper(I) as evidenced by EPR and UV-Vis spectra of the complex as well as quantum yield results. When photolysis is carried out in CHCl3 or CH2Cl2 or in the solvent mixture CHCl3/EtOH resp. CH2Cl2/EtOH of lower than 1:1 EtOH content, the primary photoproduct CuI(Et2dsc) is further oxidised in a dark reaction with the chloroalkane producing the corresponding paramagnetic mixed-ligand CuII(Et2dsc)Cl complex in equilibrium with its chloride-bridged and EPR silent, dimeric form Cu2(Et2dsc)2Cl2. At low concentration of EtOH the equilibrium is shifted to the dimeric form whereas at higher than 1:1 EtOH content in the mixed solvent CHCl3/EtOH it is shifted to CuII(Et2dsc)Cl. A reaction mechanism is proposed and the role of ethanol is discussed.     

Complexes of 2-acetylpyridinesemicarbazone and 2-acetylpyridinethiosemicarbazone with cobalt(II), chromium(III) and copper(II)

Summary The synthesis and characterization of 2-acetylpyridine-semicarbazone (apsc) and 2-acetylpyridinethiosemicarbazone (aptsc) and their complexes with CoCl₂, CrCl₃ and CuCl₂ are reported. These compounds were characterized on the basis of elemental analyses, electronic and i.r. spectra, magnetic moments and conductivity measurements. The molar conductivities in dimethyl formamide indicate the non-ionic nature of the metal chelates. An octahedral structure is proposed for the chromium(III) chelate-complexes, tetrahedral for the copper(II) compounds and tetrahedral or octahedral for the cobalt(II). Apsc and aptsc are bidentate but with different donors, though aptsc is monodentate in its complex with CrCl₃.