Nanoscale manganese oxide within Faujasite zeolite as an efficient and biomimetic water oxidizing catalyst

Nanoscale manganese oxides within Faujasite zeolite have been synthesized with a simple method and characterized by scanning electron microscopy, X-ray diffraction spectrometry, N(2) adsorption-desorption isotherms, transmission electron microscopy, and atomic absorption spectroscopy. These oxides showed efficient water oxidizing activity in the presence of cerium(iv) ammonium nitrate as a non-oxo transfer oxidant.     

Synthesis of nanocrystalline zinc manganese oxide by thermal decomposition of new dinuclear manganese(III) precursors

Nanocrystalline manganese-doped zinc oxide was synthesized by thermal decomposition of a zinc oxide sol with two new dinuclear manganese(III) complexes as precursor. Thermal analysis results indicated that the decomposition of manganese precursors occurred at 269 and 314 °C. X-ray structural analysis shows the presence of dimanganese core in the complexes and the binding of the ligands to the manganese(III) is through N₂O₂. The manganese-doped zinc oxide composite was characterized by means of X-ray diffraction, scanning electron microscopy, and UV–Vis spectroscopy. Structural properties of the composites elucidated that the manganese ions have substituted the zinc ions without changing the wurtzite structure of zinc oxide.     

氨功能化介孔MCM-41固载锰卟啉作为萘羟基化多相催化剂

将不同含量的四(五氟苯基)卟啉锰固载于表面氨基功能化的MCM-41介孔分子筛,所得样品通过粉末X射线衍射、氮气吸附脱附、傅里叶变换红外光谱、X射线光电子能谱、扫描电子显微镜、漫反射紫外-可见光谱、热重和差示扫描量热、电感耦合等离子体进行了表征.结果表明,四(五氟苯基)卟啉锰通过Mn与氨基的轴向配位固载于MCM-41.所制备的样品作为多相催化剂在以间氯过氧苯甲酸为氧化剂选择氧化萘反应中表现出良好的催化性能,且多次使用后没有明显的活性损失.     

Morphology and physicochemical properties of nanosized particles of electrochemically obtained manganese oxide

The structure and properties of nanodisperse manganese oxides obtained under conditions of an external electric field are studied using transmission and scanning electron microscopy, X-ray diffraction analysis, thermic analysis, and atom-emission spectroscopy. The influence of synthesis conditions on formation of structure and morphology of nanoparticles is studied. It is shown that effect of electric field on reaction media allows us to control the physicochemical properties and morphology of manganese oxide.     

Catalytic graphitization of PAN-based carbon fibers by spontaneously deposited manganese oxides

A simple method for the spontaneous deposition of manganese oxides on the surface of polyacrylonitrile (PAN)-based carbon fibers by a direct redox reaction between carbon fibers and permanganate ions is described. Catalytic graphitization of the PAN-based carbon fibers coated with manganese oxides was investigated by X-ray diffraction, Raman spectroscopy, and scanning electron microscopy. The results indicate that the graphitization of the PAN-based carbon fibers was accelerated in the presence of the manganese oxides even at the relatively low temperature of 1,600 °C.     

Composite sorbents based on synthetic manganese oxide and carbon fiber

Manganese oxides have been prepared on the surface of carbon fiber by simple methods: coprecipitation of manganese salts of different valence in the presence of fiber as a support or electrodeposition from Mn(II) salt solution on a carbon fiber cathode, in the presence of chitosan including, under oxidation with air oxygen conditions. The obtained samples have been characterized by scanning electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. Sorption properties of the composites toward As(V) have been studied. The relationships between sorption properties, structure, Mn valence, and manganese oxide surface morphology have been discussed.     

Porous magnetic manganese oxide nanostructures: synthesis and their application in water treatment

Magnetic manganese oxide nanostructures are fabricated at room temperature by mixing a KMnO(4) solution and oleic acid capped Fe(3)O(4) particles. Oleic acid molecules capped Fe(3)O(4) particles are oxidized by potassium permanganate (KMnO(4)) in an aqueous solution to produce porous magnetic manganese oxide nanostructures. The synthesis technique can be extended to other MnO(x) structures with composition of different nanocrystals, such as quantum dots, noble metal crystals which may have important applications as catalysts, adsorbents, electrodes and advanced materials in many scientific disciplines. Transmission electron microscopy, energy-dispersive X-ray spectroscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, X-ray powder diffraction, Fourier transform infrared spectroscopy, and nitrogen adsorption-desorption measurements are employed to characterize the structures. As an adsorbent in water treatment, the nanostructures possess a large adsorption capability and high organic pollutant removal rates due to the large surface area and pore volume. The nanostructures are recyclable as their adsorption capability can be recovered by combustion. Furthermore, the strong magnetism exhibited by the structures provides an easy and efficient separation means in wastewater treatment under an external magnetic field.     

Hydrothermal synthesis of nanostructured spinel lithium manganese oxide

Nanostructured spherical spinel lithium manganese oxide (LiMnO) with about 200 nm in diameter was synthesized for the first time by mild hydrothermal method. The formation of the nanostructured spheres was through self-assembly of the nanoparticles and nanobelts. The influence of the reaction temperature and the time of formation of the nanostructures have been systematically studied. The thermal stability of the nanostructures has been examined by heating-treatment at different temperatures. Powder X-ray diffraction, transmission electron microscopy, high-resolution transmission electron microscopy, thermogravimetric analysis and inductively coupled plasma-atomic emission spectroscopy were used to characterize the products.     

Synthesis, characterization, and catalytic activity of cryptomelane nanomaterials produced with industrial manganese sulfate

Industrial manganese sulfate from manganese mines has been utilized to synthesize cryptomelane in a simple and feasible route. K-birnessite precursor was prepared by air oxidation of the mixture of MnSO4 and KOH solutions under alkaline conditions, and then transformed to cryptomelane under a heating process. The effects of OH- concentration, airflow rate, liquid reaction temperature, stirring rate, liquid reaction time, washing condition, calcination time, and temperature were investigated. X-ray diffraction (XRD), scanning electron microscopy (SEM), and high-resolution transmission electron microscopy (HRTEM) revealed that cryptomelane prepared under optimal conditions had a tetragonal symmetry and the particles were mostly in short lathy form with sizes of 20-30 nm. The average pore size and BET surface area of cryptomelane examined by N2 adsorption methods were 24.15 nm and 32.21 m2/g, respectively. X-ray photoelectron spectroscopy (XPS) studies demonstrated that the average oxidation state of manganese in cryptomelane was about 3.9 in comparison with prephase K-birnessite of 3.4. The synthesized cryptomelane sample showed improved catalytic activity for decomposition of hydrogen peroxide as compared with natural cryptomelane, but lower than those synthesized with hydrothermal and sol-gel methods. The results of this investigation will provide fundamental information for developing a large-scale production process for transforming manganese sulfate to cryptomelane.     

A very simple method to synthesize nano-sized manganese oxide: an efficient catalyst for water oxidation and epoxidation of olefins

Nano-sized particles of manganese oxides have been prepared by a very simple and cheap process using a decomposing aqueous solution of manganese nitrate at 100 °C. Scanning electron microscopy, transmission electron microscopy and X-ray diffraction spectrometry have been used to characterize the phase and the morphology of the manganese oxide. The nano-sized manganese oxide shows efficient catalytic activity toward water oxidation and the epoxidation of olefins in the presence of cerium(iv) ammonium nitrate and hydrogen peroxide, respectively.     

Higher manganese silicide nanowires of Nowotny chimney ladder phase

We report the synthesis, structural identification, and electrical properties of the first one-dimensional (1-D) nanomaterials of a semiconducting higher manganese silicide (MnSi(2-x)) with widths down to 10 nm via chemical vapor deposition of the single-source precursor Mn(CO)(5)SiCl(3). The complex Nowotny chimney ladder structure of these homologous higher manganese silicides, also referred to as Mn(n)Si(2n-m), MnSi(1.75), or MnSi(1.8), contributes to the excellent thermoelectric performance of the bulk materials, which would be enhanced by phonon scattering due to 1-D nanoscale geometry. The morphology, structure, and composition of MnSi(2-x) nanowires and nanoribbons are examined using electron microscopy and X-ray spectroscopy. Elaborate select area electron diffraction analysis on single-crystal nanowires reveals the phase to be Mn(19)Si(33), one of a series of crystallographically distinct higher manganese silicides that have a Nowotny chimney ladder structure. Electrical transport study of single nanowires shows that they are degenerately doped with a low resistivity (17 mohms x cm) similar to the bulk.     

Optimization of synthesis procedure and structure characterization of manganese tungstate nanoplates

A simple and fast chemical method was used for synthesis of manganese tungstate nanoplates in flower-like clusters; while Taguchi robust design was employed as statistical method for optimization of the experimental parameters for the procedure. Ultrafine manganese tungstate plates in flower-like clusters were synthesized via a direct precipitation method involving addition of manganese ion solution to the aqueous tungstate reagent. Effects of various reaction conditions such as manganese and tungstate concentrations, flow rate of reagent addition and reactor temperature on the thickness of the synthesized manganese tungstate plates were investigated experimentally. Analysis of variance (ANOVA) showed that manganese tungstate nanoplates could be effectively synthesized by tuning significant parameters of precipitation procedure. Meanwhile, optimum conditions for synthesis of MnWO4 nanoplates via this simple, fast, and cost effective method were proposed. The structure and composition of the prepared nanoplates under optimum conditions were characterized by EDX, X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), FT-IR spectroscopy, and photoluminescence techniques.      

Preparation of manganese oxide nanoparticles by thermal decomposition of nanostructured manganese carbonate

MnO and Mn₂O₃ nanoparticles were prepared in air and argon atmosphere by thermal decomposition of nanocrystalline manganese carbonate synthesized by reaction of manganese(II) nitrate with glycerol. Samples were characterized using transmission electron microscopy, simultaneous thermal analysis and X-ray diffraction analysis. Average sizes of prepared nanoparticles were calculated from XRD patterns using Scherrer equation. Also, the conditions for decomposition of manganese carbonate were optimized to obtain optimal nanoparticle sizes. Due to suitable sizes of prepared nanoparticles and the initial material, this method can be used in a wide range of industrial applications.     

One-step synthesis of manganese dioxide/polystyrene nanocomposite foams via high internal phase emulsion and study of their catalytic activity

This paper is devoted to the preparation of manganese dioxide/polystyrene nanocomposite foams via a novel and facile one-step method using high internal phase emulsion as templates. Scanning electron microscopy (SEM), Fourier transform infrared spectrometer (FT-IR), X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and thermogravimetric analyses (TGA) techniques were used to characterize the resulting composites. SEM measurements revealed the porous network structure, the average pore diameters ranged from 3.8 to 30.4 μm. The presence of manganese dioxide was identified by XPS pattern, XRD, pattern and FT-IR spectra of the resulting composites. The TGA thermograms showed that the maximum content of manganese dioxide in the nanocomposite foams reached about 15.5%. The applications of the nanocomposite in the oxidative degradation of methylene blue exhibited good catalytic activity in the presence of H₂O₂ as an oxidant.     

Lithium manganese oxide with excellent electrochemical performance prepared from chemical manganese dioxide for lithium ion batteries

Chemical manganese dioxide (CMD) is synthesized by the SEDEMA process and adopted as a precursor for lithium manganese oxide with a spinel structure (LMO). LMO is also prepared from electrolytic manganese dioxide (EMD) as a reference for comparison. X-ray diffraction (XRD) shows that CMD is composed of γ-MnO₂, and scanning electron microscopy (SEM) with transmission electron microscopy (TEM) shows that the nanorods cover a spherical core with a diameter < 1 μm. The LMO prepared from CMD shows a much better rate capability and cycle life performance than that from EMD at high temperatures and high current densities. The excellent electrochemical performance is attributed to the structural stability during charge and discharge and the morphology of the LMO, a loose aggregation of the octahedral particles with a uniform size (<1 μm) and shape, which originated from that of CMD.     

基于双相不锈钢制备超级电容器电极材料MnO2

用恒电位沉积法在2304双相不锈钢基板上制备了纳米结构MnO₂薄膜. 用X射线衍射(XRD)、扫描电子显微镜(SEM)以及X射线能量色散谱(EDS)表征了MnO₂薄膜的结构、表面形貌和成分. 用循环伏安(CV)、恒流充放电和电化学阻抗谱(EIS)对MnO₂电化学性能进行测试和分析. 结果表明, 沉积得到了由100-200 nm纳米棒组成的无定形MnO₂薄膜. 随着MnO₂质量的增加, 其绝对电容增加, 而比电容逐渐下降; 随着循环伏安扫描速率的增加, 其比电容也逐渐下降. 当MnO₂的质量为0.09 mg, 扫描速率为20 mV·s^-1时, 比电容达到最大值288.9 F·g^-1. 在100 mV·s^-1的扫描速率下进行500次CV循环, 其比电容维持在一个稳定值, 且随着循环次数的增加, 比电容略有提高.     

Three-dimensional manganese dioxide-functionalized carbon nanotube electrodes for electrochemical supercapacitors

Three-dimensional manganese dioxide (MnO₂)-functionalized multiwalled carbon nanotube (MWCNT) electrodes have been produced by a simple and scalable thermal decomposition process. The electrodes are prepared by treating planar MWCNT sheets with manganese(II) nitrate (Mn(NO₃)₂) solution and annealing at low temperature (200–300 °C) and ambient pressure. The morphology, chemical composition, and structure of the resulting matrices have been investigated with scanning electron microscopy, X-ray photoelectron spectroscopy, Raman spectroscopy, and X-ray diffraction. Supercapacitors assembled with three-dimensional electrodes exhibit a 14-fold increase in specific capacitance (C _sp) in comparison to those containing pristine, two-dimensional MWCNT electrodes. C _sp varies linearly with Mn(NO₃)₂ thermal decomposition temperature (from 100 to 61 F/g at 0.2 A/g), a trend that is discussed in the context of nitrate reaction chemistry and MWCNT structure. This efficient and promising approach allows for simultaneous enhancement of electrode–electrolyte contact area and incorporation of redox-based charge storage within electrochemical capacitors.     

氧化镁上乙酸乙酯和乙酸丁酯氧化反应（英文）

采用新型无溶剂反应和回流的方法制得锰钾矿型氧化镁(K-OMS-2),同时采用常规方法制得氧化镁,并测试不同催化剂对工业排放气中有机挥发性物质(VOCs)中的模型化合物––乙酸乙酯和乙酸丁酯的催化氧性能.采用N2吸附-脱附、X射线衍射、扫描电镜、程序升温还原和X射线光电子能谱等技术对催化剂进行了表征.所有氧化镁样品均表现出很高的催化乙酸乙酯和乙酸丁酯氧化生成CO2的活性,且制备方法对催化剂性能起着重要作用.新型无溶剂法制得的K-OMS-2纳米棒样品比常规的回流法制得样品表现出更好的催化性能,含锰钾矿型氧化镁的样品比常规方法制得样品表现出更高的活性.性能最好的催化剂也表现出较高的稳定性,在213和202 oC条件下,可分别使90%的乙酸乙酯和乙酸丁酯转化为CO2.催化剂性能的显著差异清楚地表明,对于所选VOCs氧化反应,采用新型无溶剂法制得的K-OMS-2纳米棒样品比常规法制备的氧化镁混合物更好,这可能与样品结构中含有更高的Mn平均氧化态有关.本文表明了催化剂性能与其表面化学性质间存在显著的关联,显示了K-OMS-2内在性质决定了其高的催化性能.     

Nano-sized layered aluminium or zinc-manganese oxides as efficient water oxidizing catalysts

Nano-sized layered aluminium or zinc-manganese oxides were synthesized and characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction spectrometry, dynamic light scattering and atomic absorption spectroscopy. These oxides showed efficient water oxidizing activity in the presence of cerium(IV) ammonium nitrate as a non-oxo transfer oxidant. Amounts of dissolved manganese, zinc or aluminium, and water oxidation activities of these oxides were reported and compared with other manganese oxides. A mechanism for oxygen evolution and possible roles for zinc or aluminium ions are also proposed.     

Self-assembly preparation of mesoporous hollow nanospheric manganese dioxide and its application in zinc-air battery

In this work, mesoporous manganese dioxide with novel hollow nanospheric structure was prepared by a facile, template-free self-assembly process at room temperature in a short period of time. The product was characterized by X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. The results indicate that the as-prepared material has a special mesoporous hollow nanospheric morphology and a typical composition of γ-MnO₂. Polarization curve, chronoamperometry and Tafel plot tests demonstrate that this nanostructured material has high electrocatalytic activity for the reduction of dioxygen compared to commercial electrolytic MnO₂ (EMD). Electrochemical impedance spectroscopy that was analyzed by equivalent circuit shows that as-prepared MnO₂-catalysted air electrode has a small contact resistance and ohmic resistance, a low value of electrochemical polarization resistance. An all solid-state zinc-air cell has been fabricated with this material as electrocatalyst for oxygen electrode and potassium salt of cross-linked poly(acrylic acid) as an alkaline polymer gel electrolyte. The cell has a better discharge characteristic than that of the cell employing EMD at room temperature.