Fractionation of polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans and planar polychlorinated biphenyls by high performance liquid chromatography on a pyrenyl-silica column

Analytical procedures for the determination of polychlorinated dibenzo-p-dioxins (PCDD), polychlorinated dibenzofurans (PCDF) and non-ortho polychlorinated biphenyls (PCB) require a fractionation step to separate PCDD/F from planar PCB and the bulk of PCB. An HPLC method which achieves the separation of the bulk of PCB (0–6 mL of hexane), mono-ortho PCB (6–8 mL of hexane), non-ortho PCB (8–15 mL of hexane) and PCDD/F (15–50 mL of toluene) on a PYE column (2-(1-pyrenyl) ethyldimethylsilylated silica gel) in a single step without the use of backflush as other authors proposed was developed. The method shows a good accuracy and precision and it is linear in the range studied, e.g from 5.8 to 2420 pg injected in HPLC for TCDD/F, from 28.8 to 12100 pg for PeCDD/F, HxCDD/F, HpCDD/F and from 57.6 to 24200 pg for OCDD/F. It has been successfully applied to the analysis of technical mixtures of PCB (Aroclors), a pine wood sample and several water samples of different origins. Received: 29 November 1998 / Revised: 25 February 1999 / Accepted: 3 March 1999     

Thermochemical properties of gaseous and liquid polychlorinated biphenyls, polychlorinated dibenzo-p-dioxins, and dibenzofurans

The analysis and systematization of the known and calculation of the unknown thermochemical characteristics (the standard enthalpy of formation, the standard entropy, the heat capacity, etc.) of widespread hazardous isomers of gaseous and liquid compounds of polychlorinated biphenyls, polychlorinated dibenzo-p-dioxins, and polychlorinated dibenzofurans are carried out.     

Pressurized liquid extraction of polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans and coplanar polychlorinated biphenyls from contaminated soil

Extraction solvents for pressurized liquid extraction (PLE) used to extract polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans (PCDD/PCDFs), and coplanar polychlorinated biphenyls (Co-PCBs) from contaminated soil were investigated. The PCDD/PCDFs and Co-PCBs in Certified Reference Material: CRM 0422 (Forest soil) were extracted using toluene, n-hexane, acetone, acetone/toluene and acetone/n-hexane (1:1, v/v). Soxhlet extraction was the reference method. Results demonstrated that PLE using mixed solvents produced better analyte recoveries than the single solvents. However, these results were lower than those for Soxhlet extraction. Additional extraction cycles using mixed solvents achieved better recovery results. Mixed solvents and several extraction cycles were necessary for satisfactory extraction of more tightly bound PCDD/PCDFs and Co-PCBs from soil.     

Simultaneous extraction of polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans and coplanar polychlorinated biphenyls from contaminated soil using pressurized liquid extraction

Pressurized liquid extraction (PLE) was studied for simultaneous extractions of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/PCDFs), and of coplanar polychlorinated biphenyls (Co-PCBs) from a tightly bounded condition in the soil matrix. Temperatures were maintained at 175 and 200 degrees C, respectively, and two or three static cycles for single PLE with toluene and acetone/n-hexane were studied using a certified reference material to compare the effects of those conditions on recoveries. A single PLE with two static cycles at 150 degrees C and the repeated single PLE (additional PLE) were reference methods. Satisfactory recoveries were not obtained using tested single PLE (2,3,7,8-substituted PCDD/PCDFs and Co-PCBs average, average (avg.) 79-103%), but they were achieved using additional PLE (acetone/n-hexane, avg. 115-128%; toluene, avg. 111-132%). In addition, these methods and additional PLE of the reference method using acetone/n-hexane were not markedly different (avg. 123-128%). That fact suggests that the use of mixed solvents and additional PLE were more important factors than temperatures and static cycles of single PLE for quantitative and simultaneous extractions of those compounds from the soil.     

Selective pressurized liquid extraction of polychlorinated dibenzo-p-dioxins, dibenzofurans and dioxin-like polychlorinated biphenyls from food and feed samples

Selective pressurized liquid extraction (PLE) of polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (dl-PCBs) from various food and feed samples was performed with a selective PLE method previously developed for bulk PCBs. The method utilizes sulfuric acid impregnated silica inside the extraction cell to oxidize coextracted fat. Extractions were performed at 100 degrees C with n-heptane for 5 min in two cycles. Data obtained by selective PLE combined with gas chromatography/high-resolution mass spectrometry (GC-HRMS) were compared to concentrations derived from reference laboratories applying conventional sample preparation and GC-HRMS. Experiments performed on spiked vegetable oil, naturally contaminated crude fish oil and oil containing compound feed samples showed good results for these relatively simple matrices. The accuracy was generally +/-20% as compared to spiked levels or to values obtained by the reference laboratories. The precision, measured as the relative standard deviation (RSD) for 2,3,7,8-tetrachlorodibenzo-p-dioxin toxic equivalency values (TEQs), was below 10% in all cases. The method was also tested on naturally contaminated herring tissue, chicken tissue, pork tissue and sepiolitic clay, which all caused some trouble. It was observed that sufficient amounts of sodium sulfate should be used for dehydration of tissue samples and additionally, the cells should not be packed too dense in order to avoid suppressed extraction efficiency. Once this was attended to, satisfactory data could be obtained, except for sepiolithic clay. This study demonstrates that selective PLE can be applied with success to a number of food and feed matrices in analysis of PCDD/Fs and dl-PCBs. Since the fat removal step is on-line, the selective PLE method will reduce time and solvent consumption for sample preparation as compared to traditional clean-up.     

Development of a reference material for routine performance monitoring of methods measuring polychorinated dibenzo-p-dioxins, polychlorinated dibenzofurans and dioxin-like polychlorinated biphenyls

Matrix–matched environmental certified reference materials (CRMs) are one of the most useful tools to validate analytical methods, assess analytical laboratory performance and to assist in the resolution of data conflicts between laboratories. This paper describes the development of a lake sediment as a CRM for polychorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and dioxin-like polychlorinated biphenyls (DLPCBs). The presence of DLPCBs in the environment is of increased concern and analytical methods are being developed internationally for monitoring DLPCBs in the environment. This paper also reports the results of an international interlaboratory study involving thirty-five laboratories from seventeen countries, conducted to characterize and validate levels of a sediment reference material for PCDDs, PCDFs and DLPCBs.     

Development of a reference material for routine performance monitoring of methods measuring polychorinated dibenzo-p-dioxins, polychlorinated dibenzofurans and dioxin-like polychlorinated biphenyls

Matrix-matched environmental certified reference materials (CRMs) are one of the most useful tools to validate analytical methods, assess analytical laboratory performance and to assist in the resolution of data conflicts between laboratories. This paper describes the development of a lake sediment as a CRM for polychorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and dioxin-like polychlorinated biphenyls (DLPCBs). The presence of DLPCBs in the environment is of increased concern and analytical methods are being developed internationally for monitoring DLPCBs in the environment. This paper also reports the results of an international interlaboratory study involving thirty-five laboratories from seventeen countries, conducted to characterize and validate levels of a sediment reference material for PCDDs, PCDFs and DLPCBs.     

New strategy for comprehensive analysis of polybrominated diphenyl ethers,polychlorinated dibenzo-p-dioxins,polychlorinated dibenzofurans and polychlorinated biphenyls by gas chromatography coupled with mass spectrometry

A strategy for determination of polybrominated diphenyl ethers, polychlorinated dibenzodioxins, polychlorinated dibenzofurans and polychlorinated biphenyls on fatty matrices has been established. After extraction, the proposed method allows the purification and the fractionation of all target groups of compounds in a simple multi-step automated clean-up. Furthermore, their subsequent analysis is carried out using a single benchtop mass spectrometer, in four separate injections. Required sensitivity considering levels found in the environment is attained using electron impact ionisation followed by tandem in time mass spectrometry. The whole method has been evaluated on standard solution and quality control samples consisting of fortified beef fat. Sensitivity, selectivity, accuracy and repeatability were tested with satisfactory results.     

Fast clean-up for polychlorinated dibenzo-p-dioxins, dibenzofurans and coplanar polychlorinated biphenyls analysis of high-fat-content biological samples

A fast clean-up procedure for the low level analysis of polychlorinated dibenzo-p-dioxins. polychlorinated dibenzofurans and coplanar polychlorinated biphenyls in highly fatty biological matrices using high capacity disposable multi-layer silica columns is presented. Results were compared with gel permeation chromatography for removal of lipids. Analytical criteria such as recovery rates, repeatability, reproducibility and robustness are evaluated through a broad range of biological matrices and reference materials analysis. The final proposed procedure for the complete analysis, including pressurized liquid extraction, Power-Prep system clean-up and GC-high-resolution MS analysis requires only 48 h, and allows the simultaneous preparation of up to 10 samples.     

Trace analysis of polychlorinated dibenzo-p-dioxins, dibenzofurans and WHO polychlorinated biphenyls in food using comprehensive two-dimensional gas chromatography with electron-capture detection

Trace analysis of 2,3,7,8-polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs) and the 12 WHO-PCBs (four non-ortho and eight mono-ortho congeners that have been assigned toxic equivalence factors, TEFs, by the World Health Organisation) was conducted by comprehensive two-dimensional gas chromatography with a micro electron-capture detector (GC x GC-microECD). Four food matrices (fish oil from herring, spiked cows' milk, vegetable oil and an eel extract) were analysed by two GC x GC laboratories, and four GC-HRMS laboratories generated reference values. The two GC x GC laboratories used different column combinations for separating the target analytes. For the first dimension, non-polar DB-XLB and VF-1 columns were used, and for the second dimension, an LC-50 liquid crystalline column with unique selectivity for planar compounds. The congener-specific and total toxic equivalence (TEQ) data obtained using DB-XLB x LC-50 were in good agreement with results obtained by the GC-HRMS laboratories. The WHO-PCB data obtained with the VF-1 x LC-50 combination was also good, but the PCDD/F concentrations were sometimes overestimated due to matrix interferences. GC x GC-microECD using DB-XLB x LC-50 seems to fulfil the European Community requirements of a screening method for PCDD/F and WHO-PCB TEQ in food.     

Separation of seventeen 2,3,7,8-substituted polychlorinated dibenzo-p-dioxins and dibenzofurans and 12 dioxin-like polychlorinated biphenyls by comprehensive two-dimensional gas chromatography with electron-capture detection

Comprehensive two-dimensional gas chromatography (GC x GC) with electron-capture detection (ECD) has been optimized for the separation of seventeen 2,3,7,8-substituted polychlorinated dibenzo-p-dioxins and dibenzofurans and 12 dioxin-like polychlorinated biphenyls, with emphasis on the selection of the first- and second-dimension, commercially available, columns. When eight second-dimension columns were subsequently combined with a 100% methylpolysiloxane stationary phase (DB-1) in the first dimension to create orthogonal conditions, a complete separation of all congeners with different TEF values was obtained with two column combinations, DB-1 x VF-23 and DB-1 x LC-50. When other types of first-dimension columns were used (and orthogonality was partly sacrificed), a DB-XLB column combined with 007-65HT, VF-23 and LC-50 was found to provide a complete separation of all 29 priority congeners. Next, the potential of these three column combinations for real-life analysis was preliminarily studied. With a spiked and fractionated milk extract, DB-XLB x LC-50 was found to be the most powerful column combination, because of the good separation of the 29 priority congeners from each other as well as from the matrix constituents. Quantitative performance (close to three-order linearity; LODs, 30-150 fg injected; R.S.D.s, 1.5-6.5% (n = 10)) was satisfactory.     

杭州市冬季大气气溶胶PM2.5中二恶英和多氯联苯的污染特征

2014年1月在杭州市选择5个点位采集大气颗粒物PM_2.5样品,采用同位素稀释高分辨气相色谱/高分辨质谱测定PM_2.5中的二恶英（PCDD/Fs）和多氯联苯（PCBs）,对PM_2.5的污染状况以及PM_2.5中PCDD/Fs和PCBs的污染水平及分布特征进行了研究。PM_2.5的质量浓度范围为85~168 μg/m³,PM_2.5污染较重,但与2004年同期相比明显降低。PM_2.5中PCDD/Fs的毒性当量（TEQ）为0.277~0.488 pg I-TEQ/m³,明显高于2004年同期采集样品。颗粒物中PCDD/Fs以八氯代二苯并-对-二恶英（OCDD）为主,毒性当量主要贡献者为2,3,4,7,8-五氯代二苯并呋喃（2,3,4,7,8-PeCDF）。PM_2.5中PCBs的质量浓度范围为2.9~8.1 pg/m³,二恶英类多氯联苯（DL-PCBs）的毒性当量范围为2.6~6.1 fg WHO-TEQ/m³,污染较低。PCBs在颗粒物中分布以PCB-28为主,但对毒性当量贡献最大的为PCB-126。PCDD/Fs和PCBs的气-固分配特征表现为PCDD/Fs主要分布于颗粒物中,而PCBs主要分布于气相中。     

Suitability of several carbon sorbents for the fractionation of various sub-groups of toxic polychlorinated biphenyls, polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans

Feasibility of several sorbents, Amoco PX-21, Carbosphere, Carbopack B and C and 2-(1-pyrenyl) ethyldimethylsilylated silica gel (PYE), for the fractionation of polychlorinated biphenyls, polychlorinated dibenzo-p-dioxins and furans was investigated. Selection was based on their suitability for quantitative isolation of the target compounds with special attention for the most toxic mono- and non-ortho-CBs to prevent coelution with other congeners during the final determination by gas chromatography. Cost-effectiveness in terms of solvent and time consumption as well as feasibility for routine analysis and automation were considered additional merits of the methods compared. Final evaluation of the procedures providing the best results was done by comparison of the results obtained from the analysis of real-life samples. The results showed that, among the sorbents tested, Carbopack B and PYE were the most suitable for routine analysis. In particular, these sorbents allowed a more reliable determination of the toxic congeners and, consequently, of the toxic equivalents of 2,3,7,8-tetrachlorodibenzo-p-dioxin content in environmental samples.     

Analysis of polychlorinated dibenzo-p-dioxins, dibenzofurans and dioxin-like polychlorinated biphenyls in vegetable oil samples by gas chromatography-ion trap tandem mass spectrometry

Gas chromatography coupled to ion trap tandem mass spectrometry (CG-MS-MS) has been evaluated for the analysis of polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) and dioxin-like polychlorinated biphenyls (dl-PCBs) in vegetable oil samples containing different concentration levels (0.2-6 pg WHO-TEQ g(-1) for both PCDD/Fs and dl-PCBs) of the 29 toxic congeners of PCDD/F and dioxin-like PCBs. The effect of potential interfering compounds such as polychlorinated naphthalenes (PCNs), polychlorinated biphenyls (PCBs) and polychlorinated diphenylethers (PCDEs) on the quantification of mono-ortho PCBs has been investigated. In addition, the influence of the clean-up procedure on the final determination by CG-MS-MS was studied, showing that the quality of the results depends to a great extent on this analytical step. Quality parameters have been established and good precisions (CV: 3-19%) and low limits of detection for PCDD/Fs (0.04-0.20 pg g(-1) oil) and dl-PCBs (0.08-0.64 pg g(-1) oil) were obtained. The method was validated by a comparison of the CG-MS-MS results with those obtained by GC-HRMS.     

Determination of polychlorinated biphenyls in sediment by on-line narrow-bore column liquid chromatography/capillary gas chromatography

Narrow-bore column liquid chromatography coupled on-line with capillary gas chromatography (LC/GC) is used for the determination of polychlorinated biphenyls (PCBs) in sediment via a heart-cutting technique. This method is compared with a method in which two off-line column clean-up steps are used with subsequent analysis by capillary gas chromatography. For the LC/GC analysis the recovery of PCBs was 90–100%. For two sediment samples from the river Meuse the LC/GC and the other, more laborious method showed good agreement.     

Comparison of gas chromatography-ion-trap tandem mass spectrometry systems for the determination of polychlorinated dibenzo-p-dioxins, dibenzofurans and dioxin-like polychlorinated biphenyls

Two gas chromatography-mass spectrometry systems equipped with an ion-trap mass analyzer working in tandem mode (GC-MS-MS) were evaluated for the determination of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (PCBs) in food samples. The performance of the two ion-trap instruments, which dispose of an external ion source (ThermoFinnigan GCQ/Polaris) and internal ionization (Varian Saturn 2,200), have been compared in terms of linearity, repeatability, limit of detection and long-term precision. Both instruments provided similar run-to-run and day-to-day precisions, ranging from 2% to 8% and between 2% and 13%, and instrumental limits of detection between 0.09 and 0.36 pg injected for PCDD/Fs and from 0.03 to 0.09 pg injected for dioxin-like PCBs. Although both instruments seem to be suitable for food analysis, only the use of external ionization allowed to achieve reliable results for PCDD/F determination at concentrations close to the maximum residue levels established by the EU for foods. Internal ionization provides high limits of detection (from 10- to 30-fold higher) and worse precision (RSD, 14-43%). In contrast, for dioxin-like PCBs both instruments allowed to obtain excellent results with precisions lower than 15%.     

Advances in analytical techniques for polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans and dioxin-like PCBs

Analytical techniques for the determination of polychorinated dibenzo-p-dioxins (PCDD), polychlorinated dibenzofurans (PCDF) and dioxin-like PCBs (DLPCB) are reviewed. The focus of the review is on recent advances in methodology and analytical procedures. The paper also reviews toxicology, the development of toxic equivalent factors (TEF) and the determination of toxic equivalent quantity (TEQ) values. Sources, occurrence and temporal trends of PCDD/PCDF are summarized to provide examples of levels and concentration ranges for the methods and techniques reviewed.     

Congener-specific method for the determination of ortho and non-ortho polychlorinated biphenyls, polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans in foods by carbon-column fractionation and gas chromatography-isotope dilution mass spectrometry

 The chromatographic behavior of ortho and non-ortho polychlorinated biphenyls (PCBs) on supported carbon columns has been investigated and the structure-affinity relationship of activated carbon towards PCB molecules established. Optimisation of the parameters controlling the elution of PCB congeners through the carbon column led to the development of a solvent scheme for the efficient separation of (i) ortho substituted PCBs, (ii) non-ortho substituted PCBs and (iii) polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) in three separate fractions. A method for the extraction, clean-up, fractionation and determination of ortho and non-ortho substituted PCBs by GC-isotope dilution MS was developed and validated by analysis of a certified reference material. Possible losses of PCBs during freeze-drying and interferences of aliphatic hydrocarbons during mass spectrometric determination of ortho substituted PCBs are also discussed. Received: 23 June 1995/Revised: 9 May 1996/Accepted: 25 May 1996     

Comparison of subcooled liquid vapor pressures of polychlorinated dibenzo-p-dioxins and dibenzofurans predicted by QSPR and GC-RI methods

Subcooled liquid vapor pressures (P(L)) are of great importance for assessing the persistent behavior of organic pollutants. As P(L) cannot be determined by direct experiments, it is of interest to develop and evaluate various predictive methods. In the current study, gas chromatography retention index (GC-RI) and quantitative structure-property relationship (QSPR) methods were used to develop predictive models for P(L) of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). The model development was based on P(L) values converted from consistent experimental solid vapor pressures (P(S)). The P(L) values predicted by the two methods are highly consistent with each other, and in-between sets of values predicted by others. Since the QSPR method can be regarded as independent of experiments, and can be used to interpret intermolecular interactions that govern the magnitude of P(L), it may be superior to the GC-RI method.