Antibacterial activity of pH‐sensitive genipin cross‐linked chitosan/poly(ethylene glycol)/silver nanocomposites

Novel nanocomposites consisting of genipin cross‐linked chitosan (GC), poly(ethylene glycol) (PEG), and silver nanoparticles were prepared for such biomedical applications as the wound‐healing materials. Various amounts of silver nanoparticles were dispersed in the GC/PEG hydrogel matrix without severe aggregation. The effects of composition and silver nanoparticles on the physico‐chemical properties of samples were evaluated by infrared analysis, contact angle measurements, and swelling tests. The GC/PEG/Ag nanocomposite showed a pH‐sensitive swelling behavior. The surface hydrophilicity of GC/PEG/Ag nanocomposites was improved with the increase of silver nanoparticle content. L929 cell attachment was improved in the presence of silver nanoparticles. The antimicrobial function was assessed for the GC/PEG/Ag nanocomposites containing the silver content over 100 ppm. The silver nanoparticles had the dual functions of reinforcing structural stability and enhancing antimicrobial activity of GC/PEG/Ag nanocomposites. Copyright © 2010 John Wiley & Sons, Ltd.     

A Simple and Fast Aqueous‐Phase Synthesis of Ultra‐Highly Concentrated Silver Nanoparticles and Their Catalytic Properties

A simple and fast synthetic route to ultra‐highly concentrated silver nanoparticles with long‐term stability by reducing AgNO₃ with ascorbic acid in the presence of polyethyleneimine (PEI) as a stabilizer in an aqueous phase is reported. The concentration of silver precursor was as high as 2000 mm (200 g of Ag nanoparticle per liter of water) and the reaction time was less than 10 min. The resulting silver nanoparticles show long‐term stability after two months of storage at room temperature without any signs of particle aggregation or precipitation in an aqueous phase. The successful ligand exchange of PEI‐stabilized silver nanoparticles to polyethylene glycol (PEG) and polyvinylpyrrolidone (PVP) without particle aggregation is also demonstrated. In addition, the catalytic activities of silver nanoparticles stabilized by various stabilizers prepared by the ligand exchange method was investigated. The PEI‐stabilized silver nanoparticles exhibited a higher stability than those of PEG‐ and PVP‐stabilized silver nanoparticles in the diffusion‐controlled catalytic reduction of 4‐nitrophenol to 4‐aminophenol by NaBH₄.     

Solvent selection for matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometric analysis of synthetic polymers employing solubility parameters

The principle relating to the selection of a proper matrix, cationization reagent, and solvent for matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS) of synthetic polymers is still a topic of research. In this work we focused on the selection of a suitable MALDI solvent. Polystyrene PS7600 and poly(ethylene glycol) PEG4820 were analyzed by MALDI‐TOF MS using various solvents which were selected based on the Hansen solubility parameter system. For polystyrene (PS), dithranol was used as the matrix and silver trifluoroacetate as the cationization reagent whereas, for poly(ethylene glycol) (PEG), the combination of 2,5‐dihydroxybenzoic acid and sodium trifluoroacetate was used for all experiments. When employing solvents which dissolve PS and PEG, reliable MALDI mass spectra were obtained while samples in non‐solvents (solvents which are not able to dissolve the polymer) failed to provide spectra. It seems that the solubility of the matrix and the cationization reagent are less important than the polymer solubility. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis and Characterization of PEG‐Based Drug‐Responsive Biohybrid Hydrogels

Interactive materials being responsive to a biocompatible stimulus represent a promising approach for future therapeutic applications. In this study, we present a novel biohybrid material synthesized from biocompatible components being stimulus‐responsive to the pharmaceutically approved small‐molecule novobiocin. The hydrogel design is based on the gyrase B (GyrB) protein, which is covalently grafted to multi‐arm polyethylene glycol (PEG) using a Michael‐type addition reaction. Upon addition of the GyrB‐dimerizing substance coumermycin, stable hydrogels form which can be dissolved in a dose‐adjustable manner by the antibiotic novobiocin. The switchable properties of this PEG‐based hydrogel are favorable for future applications in tissue engineering and as externally controlled drug depot.     

Tri‐block copolymers of polyethylene glycol and hyperbranched poly‐3‐ethyl‐3‐(hydroxymethyl)oxetane through cationic ring opening polymerization

Tri‐block copolymers of linear poly(ethylene glycol) (PEG) and hyperbranched poly‐3‐ethyl‐3‐(hydroxymethyl)oxetane (poly‐TMPO) are reported. The novel dumb‐bell shaped polyethers were synthesized in bulk with cationic ringopening polymerization utilizing BF₃OEt₂ as initiator, via drop‐wise addition of the oxetane monomer. The thermal properties of the materials were successfully tuned by varying the amount of poly‐TMPO attached to the PEG‐chains, ranging from a melting point of 54 °C and a degree of crystallinity of 76% for pure PEG, to a melting point of 35 °C and a degree of crystallinity of 12% for the polyether copolymer having an average of 14 TMPO units per PEG chain. The materials are of relatively low polydispersity, with M_n/M_w ranging from 1.2 to 1.4. The materials have been evaluated for usage with the energetic oxidizer ammonium dinitramide. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6191–6200, 2009     

Nanoparticle Capping Agent Controlled Electron‐Transfer Dynamics in Ionic Liquids

Herein, we report a change in the mechanism of the oxidation of silver nanoparticles (Ag NPs) with the molecular weight of a poly(ethylene) glycol (PEG) capping agent. Characterisation of the modified nanoparticles is undertaken using dynamic light scattering and UV/Vis spectroscopy. Electrochemical analyses reveal that the oxidation of 6000 molecular weight (MW) PEG is consistent with a polymer‐gated mechanism, whilst for 2000 MW PEG the polymer does not hinder the oxidation. The 10,000 MW PEG Ag NPs are rendered almost electrochemically inactive. This study demonstrates the ability to alter and better understand the electron‐transfer mechanism in a room temperature ionic liquid (RTIL) by systematically altering the capping agent.     

Facile preparation of metal nanoparticle‐coated polystyrene beads by catechol conjugated polymer

A universal method to modify polystyrene beads (PSBs) is proposed, using the 2‐chloro‐3′,4′‐dihydroxyacetophenone (CCDP) quaternized to poly(ethylene glycol)‐g‐poly(dimethylaminethyl methacrylate) [PEG‐g‐PDMA, QC‐PEG]. In the study, CCDP of QC‐PEG is adhered onto PSBs under alkali condition, where polyvinyl pyrrolidone (PVP) has been added as stabilizer. The surface modified PSBs with QC‐PEG (QC‐PSBs) have been functionalized, by depositing silver nanoparticles (Ag‐PSBs) as antimicrobial, iron oxide nanoparticles (Fe‐PSBs) as magnet, and TiO₂ nanoparticles (Ti‐PSBs) as photo‐catalyst. Modification and functionalization of the obtained PSBs have been rectified by microscopy and spectroscopy investigations, including scanning electron microscope, X‐ray photoelectron microscope, and UV–vis spectrometer. The functionalized Ag‐PSBs show outstanding antimicrobial activities against gram‐positive and gram‐negative bacteria, due to their containing silver nanoparticles; while significant photo‐catalytic behavior was found against methylene blue, after depositing TiO₂ nanoparticles. The proposed universal modified PSBs will make a strong contribution in different fields, as a functional material. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis of Dendrimer‐Encapsulated Silver Nanoparticles and Its Catalytic Activity on the Reduction of 4‐Nitrophenol

A new type of water soluble PEG core dendrimer having hydroxyl groups at the periphery was synthesized and used to prepare silver nanoparticles. The dendrimer and the dendrimer encapsulated nanoparticles (DENs) were characterized by spectroscopic techniques. The kinetics of catalytic activity of the prepared silver nanoparticle on the reduction of 4‐nitrophenol to 4‐aminophenol by NaBH₄ as a reductant was studied using UV‐Visible spectrophotometer.     

Ag‐CNT Architectures for Attomolar Dopamine Detection and 100‐Fold Fluorescence Enhancements with Cellphone‐Based Surface Plasmon‐Coupled Emission Platform

We report cellphone‐based detection of dopamine with attomolar sensitivity in clinical samples with the use of a surface plasmon‐coupled emission (SPCE) platform. To this end, silver‐coated carbon nanotubes were used as spacer and cavity materials on SPCE substrates to obtain up to 100‐fold fluorescence enhancements. The presence of silver on the carbon nanotubes helped to overcome fluorescence quenching arising due to π–π interactions between the carbon nanotube and rhodamine 6G. The competing adsorption of dopamine versus rhodamine 6G on graphene oxide was utilized to develop this sensing platform.     

Effect of oxidized silicon (SiOx) surfaces functionalization on real‐time PCR by Lab‐on‐a‐chip microdevices

There is a great need to improve the biocompatibility of silicon‐based lab‐on‐chip substrate materials for reliable quantitative analysis of biological solutions. These advanced microdevice surfaces need not only be biocompatible but also have surfaces of defined wettability characteristics. The inhibition of biomolecular activity due to microdevice surface interaction is common and can result in inaccurate results or decreased reaction yields. In this work we investigate different techniques for the chemical functionalization of oxidized silicon (SiO_x) surfaces in order to: (i) obtain defined hydrophobic/hydrophilic surfaces; and (ii) increase the efficiency of performing Real‐Time Polymerase Chain Reaction (PCR) on a silicon‐based lab‐on‐chip. Silicon oxide surfaces are functionalized by grafting alkylic chain silanes and poly(ethylene glycol) (PEG) chains to the surfaces, rendering them hydrophobic or hydrophilic. Functionalized surfaces are characterized through contact angle and atomic force microscopy (AFM) measurements, showing stable hydrophobic surfaces with contact angles of 69–78° and layer thicknesses of 11–15 Å and hydrophilic surfaces displaying contact angles of 5–6° and thicknesses of 22–52 Å. PCR experiments carried out directly on bare silicon oxide lab‐on‐chip surfaces show low yields of DNA amplification. Hydrophobic surfaces decrease the inhibition of PCR. Hydrophilic surfaces are a major improvement on the bare silicon oxide exhibiting the same maximum reaction yield as obtained with a standard thermocycler. We have found that the best results are associated with PEG modified surfaces, which prove very suitable for the fabrication of reliable PCR silicon lab‐on‐chips. Copyright © 2011 John Wiley & Sons, Ltd.     

Optical Properties and Photo‐Oxidation of Tetraphenylethene‐Based Fluorophores

We report the optical properties of tetraphenylethene (TPE) and other TPE derivatives functionalised with an octyl group (TPE‐OCT) and polyethyleneglycol group (TPE‐PEG) in the side chain. We compared TPE‐OCT and TPE‐PEG with TPE in both organic solvents and under aqueous conditions. All materials exhibit aggregation‐induced emission, however, uncommonly, TPE‐PEG seems to aggregate in aqueous solution with enhanced photoluminescence quantum efficiency (PLQE) relative to that in organic solvents. All three materials can be photo‐oxidised in solution to their diphenylphenanthrene derivative by irradiation with UV light (at both ≈1 and ≈5 mW cm^?2), with a subsequent enhancement in PL efficiency. The electron‐donating ether group increases the rate of oxidation relative to bare TPE and also photo‐oxidation was shown to be solvent and concentration dependent. Finally, photo‐oxidation was also demonstrated in the aggregate state.     

Macromolecular Organization of Poly(L‐lactide)‐block‐Polyoxyethylene into Bio‐Inspired Nano‐Architectures

Block copolymers create various types of nano‐structures, e. g., spheres, rods, cubes, and lamellae. This review discloses the dynamic macromolecular organization of block copolymers comprising poly(L ‐lactide) (PLLA) and poly(oxyethylene) (PEG) that allows to simulate elaborate biological systems. The block copolymers, AB‐ (PLLA‐PEG) and ABA‐type (PLLA‐PEG‐PLLA), are synthesized by ordinary lactide polymerization to have a controlled block length. They are dispersed into an aqueous medium to prepare nano‐scale particles, consisting of hydrophobic PLLA and hydrophilic PEG in the core and shell, respectively. Then, the particles are placed on a flat substrate by the casting method. The particles are detected as discoids by AFM, having shrunk with loss of water. Heat‐treatment of these particles at 60°C (above T_g of PLLA) gives rise to a collapse into small fragments, which then aggregate into bands with nano‐size width and thickness. The PLLA‐PEG bands align parallel to each other, while the PLLA‐PEG‐PLLA bands form a characteristic network resembling the neuron system created in animal tissue. As analyzed by TEM diffraction, each is composed of α‐crystal of PLLA whose c‐axis (molecular axis) is perpendicular to the substrate surface. Based on this fact, a doubly twisted chain structure of PLLA is proposed in addition to a plausible mechanism for the self‐organization of the block copolymers. Derivatives of the PLLA‐PEG block copolymers can form far more interesting nano‐architectures. An equimolar mixture of enantiomeric copolymers, PLLA‐PEG‐PLLA and PDLA‐PEG‐PDLA, forms a hydrogel that is thermo‐responsive. The terminal‐modified poly(L ‐lactide)‐block‐polyoxyethylene monocinnamate (PLLA‐PEG‐C) forms a highly stabilized nanofiber by the photo‐reaction of the cinnamates placed in the outer layer of the nanobands.     

PEG‐Amine‐Initiated Polymerization of Sarcosine N‐Thiocarboxyanhydrides Toward Novel Double‐Hydrophilic PEG‐b‐Polysarcosine Diblock Copolymers

Amino acid N‐thiocarboxyanhydride (NTA), the thioanalog of N‐carboxyanhydride (NCA), is much more stable than NCA against moisture and heat. The convenient monomer synthesis without rigorous anhydrous requirements makes the ring‐opening polymerization of NTA a competitive alternative to prepare polypeptoid‐containing materials with potential of large‐scale production. Polysarcosines (PSars) with high yields (>90%) and low polydispersities (<1.2) are synthesized from sarcosine N‐thiocarboxyanhydride (Sar‐NTA) at 60 °C initiated by primary amines including poly(ethylene glycol) amine (PEG–NH₂). The lengths of PSar segments are controlled by various feed ratios of Sar‐NTA to initiator. PEG‐b‐PSar products, a class of novel double‐hydrophilic diblock copolymers, are effective in stabilizing oil‐in‐water emulsions at nano‐ and microscale, which demonstrates promising encapsulation applications in food, cosmetics, and drug delivery. Due to the different solubility of PEG and PSar blocks, PEG‐b‐PSar copolymers form micelles in organic solvents with the capability to incorporate metal cations including Cu²⁺ and Ni²⁺.

     

Structural Versatility in Slide‐Ring Gels: Influence of Co‐Threaded Cyclodextrin Spacers

We describe a one‐pot strategy for the fabrication of novel slide‐ring (SR) gels based on supramolecular polyrotaxane structures with cyclodextrin‐derived cross‐links and additional free cyclodextrin ring spacers co‐threaded onto the polymer backbones. Photoinitiated thiol‐yne click coupling leads to facile hydrogel fabrication from pseudo‐polyrotaxanes prepared in situ from β‐cyclodextrin derivatives and bifunctional polyethylene glycol (PEG). The obtained SR gels were characterized by NMR spectroscopy using a polyrotaxane model compound with the ratio of cyclodextrin sliding spacers to PEG backbone controlled by adjusting the feed ratio of the starting materials. This structural tuning leads to dramatic changes in the rheological properties, mechanical properties, and swelling behavior of the SR gels. In addition, the coupling of simple synthetic procedures with enhanced properties offers a versatile approach to novel elastomeric materials. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 55, 1156–1165     

One‐step synthesis of a thienylenepyridazinylenethienylene‐based coil‐rod‐coil copolymer with enhanced emission and improved fluorescence stability

A new coil‐rod‐coil copolymer is synthesized via Sonogashira coupling using one‐step methodology. The copolymer PEG‐OEPETPT‐PEG constitutes of poly(ethylene glycol) (PEG) as the coil block, and oligo[p‐(ethynylenephenyleneethynylene)‐alt‐(thienylenepyridazinylenethienylene)] (OEPETPT) as the rod segment. The conjugated polymer PEPETPT with the same conjugated building blocks is also synthesized for comparison. The structures of both polymers are confirmed by NMR, combined with other characterizations. PEG‐OEPETPT‐PEG has a 12 nm blue‐shift in the emission maximum compared with that of PEPETPT, and a higher quantum yield of fluorescence in THF. PEG‐OEPETPTE‐PEG tolerates up to 20% water content in H₂O/THF mixed solvent without significantly changing the emission wavelength and intensity, while the fluorescence of PEPETPT is dramatically quenched by a very small quantity of water. Further photophysical studies about these two polymers indicate that the introduction of PEG coils onto the conjugated block retards the water‐induced‐aggregation and therefore improves the fluorescence stability of PEG‐OEPETPT‐PEG. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Study on the PEG‐based microwave‐assisted extraction of flavonoid compounds from persimmon leaves

A method for PEG‐based microwave‐assisted extraction (MAE) of flavonoid compounds from persimmon leaves has been successfully developed. The extraction efficiency of total flavonoid content was evaluated by the chromatographic peak areas of quercetin and kaempferol, which are two bioactive components typically found in persimmon leaves. The best combination of extraction parameters was obtained with response surface methodology. A microwave power of 525 W, liquid to solid ratio of 17:1 mL/g, and PEG aqueous solution concentration of 60% w/w were identified as the optimum parameters. Extraction dynamics analysis indicated that the quercetin, kaempferol, and total flavonoid contents were rising with increasing extraction time up to 20–25 min, from which point onwards they all decreased. Under the optimum conditions, quercetin, kaempferol, and total flavonoid contents obtained from the sample were 1.20 ± 0.05, 0.64 ± 0.11, and 16.90 ± 0.06 mg/g, respectively. Compared with ethanol‐based MAE, and ethanol‐based and PEG‐based ultrasonic‐assisted extractions, PEG‐based MAE had higher efficiency for the extraction of flavonoid compounds from persimmon leaves. Overall, PEG‐based MAE represents an efficient choice for the extraction of bioactive substances from traditional Chinese medicines.     

Synthesis and characterization of poly(DTC‐b‐PEG‐b‐DTC) triblock and poly(TMC‐b‐DTC‐b‐PEG‐b‐DTC‐b‐TMC) pentablock copolymers and kinetics of the polymerization

Dihydroxyl capped biodegradable poly(DTC‐b‐PEG‐b‐DTC) (BCB) triblock copolymer and poly(TMC‐b‐DTC‐b‐PEG‐b‐DTC‐b‐TMC) (ABCBA) pentablock copolymer have been synthesized by PEG and BCB copolymer as macroinitiator in the presence of yttrium tris(2,6‐di‐tert‐butyl‐4‐methylphenolate). The copolymers without random segments have been thoroughly characterized by ¹H, ¹³C‐NMR, SEC, and DSC. Molecular weights of the obtained copolymers are dependent on the amount of PEGs and coincide with the theoretical values. The exchange reaction of yttrium alkoxide and hydroxyl end group is essential for controlling the products' molecular weight. Their thermal behaviors are relevant to the chain lengths of PEG and PDTC segments. The Monte Carlo method has been developed to estimate the chain propagation constant and exchange reaction constant. In average, one exchange reaction will occur after approximately six monomer molecules insert into the growing chain. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1787–1796, 2005     

Block copolymer composition drives function of self‐assembled nanoparticles for delivery of small‐molecule cargo

Nanoparticles are useful for the delivery of small molecule therapeutics, increasing their solubility, in vivo residence time, and stability. Here, we used organocatalytic ring opening polymerization to produce amphiphilic block copolymers for the formation of nanoparticle drug carriers with enhanced stability, cargo encapsulation, and sustained delivery. These polymers comprised blocks of poly(ethylene glycol) (PEG), poly(valerolactone) (PVL), and poly(lactide) (PLA). Four particle chemistries were examined: (a) PEG‐PLA, (b) PEG‐PVL, (c) a physical mixture of PEG–PLA and PEG–PVL, and (d) PEG–PVL–PLA tri‐block copolymers. Nanoparticle stability was assessed at room temperature (20 °C; pH = 7), physiological temperature (37 °C; pH = 7), in acidic media (37 °C; pH = 2), and with a digestive enzyme (lipase; 37 °C; pH = 7.4). PVL‐based nanoparticles demonstrated the highest level of stability at room temperature, 37 °C and acidic conditions, but were rapidly degraded by lipase. Moreover, PVL‐based nanoparticles demonstrated good cargo encapsulation, but rapid release. In contrast, PLA‐based nanoparticles demonstrated poor stability and encapsulation, but sustained release. The PEG–PVL–PLA nanoparticles exhibited the best combination of stability, encapsulation, and release properties. Our results demonstrate the ability to tune nanoparticle properties by modifying the polymeric architecture and composition. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1322–1332     

Increasing the hydrophilicity of star‐shaped amphiphilic co‐networks by using of PEG and dendritic s‐PCL cross‐linkers

New hyperbranched hydrophobic cross‐linkers with peripheral azide groups were synthesized as follows: First, star‐shaped polycaprolactones (sPCL) were synthesized by ring‐opening polymerization of caprolactone in the presence of pentaerythritol and tin (II) octoate. In the next step, sequential acrylation, Micheal addition, tosylation, and azidation by acryloyl chloride, diethanol amine, tosyl chloride, and sodium azide were respectively exploited to synthesize azide‐functionalized hyperbranched star‐shaped polycaprolactones which were named sPCL‐acrylate‐diethanolamine‐azide (sPCL‐AC‐DEA‐N₃) and sPCL‐acrylate‐diethanolamine‐acrylate‐diethanolamine‐azide (sPCL‐AC‐DEA‐AC‐N₃). All steps were thoroughly characterized by FT‐IR and ¹H NMR spectroscopy. The GPC analysis showed that the molecular weight of sPCL increased after two azide functionalizations. Amphiphilic hydrogels based on sPCL‐AC‐DEA‐N₃ (M_n = 8130 g/mol) and sPCL‐AC‐DEA‐AC‐N₃ (M_n = 10112 g/mol) with linear alkyne‐terminated polyethylene glycols (PEG) (M_n = 2000, 4000, and 6000 g/mol) were synthesized through click coupling between azide and alkyne groups. In both hydrogels, the swelling ratio increased by increasing the molecular weight of PEG. The obtained results showed that the branching of the cross‐linker, significantly affected the swelling ratio of hydrogels. For instance, the swelling ratio of sPCL‐AC‐DEA‐AC‐N₃ and PEG‐6000 (Q = 900) was higher than sPCL‐AC‐DEA‐N₃ and PEG‐6000 (Q = 600). Despite the high cross‐linking density of sPCL‐AC‐DEA‐AC‐DEA‐N₃–based hydrogels, the amount of released theophylline was higher than sPCL‐AC‐DEA‐N₃–based hydrogels, due to the high content of PEG in these hydrogels.     

X‐ray Radiation‐Controlled NO‐Release for On‐Demand Depth‐Independent Hypoxic Radiosensitization

Multifunctional stimuli‐responsive nanotheranostic systems are highly desirable for realizing simultaneous biomedical imaging and on‐demand therapy with minimized adverse effects. Herein, we present the construction of an intelligent X‐ray‐controlled NO‐releasing upconversion nanotheranostic system (termed as PEG‐USMSs‐SNO) by engineering UCNPs with S‐nitrosothiol (R‐SNO)‐grafted mesoporous silica. The PEG‐USMSs‐SNO is designed to respond sensitively to X‐ray radiation for breaking down the S N bond of SNO to release NO, which leads to X‐ray dose‐controlled NO release for on‐demand hypoxic radiosensitization besides upconversion luminescent imaging through UCNPs in vitro and in vivo. Thanks to the high live‐body permeability of X‐ray, our developed PEG‐USMSs‐SNO may provide a new technique for achieving depth‐independent controlled NO release and positioned radiotherapy enhancement against deep‐seated solid tumors.