d‐Fructose‐Decorated Poly(ethylene imine) for Human Breast Cancer Cell Targeting

The high affinity of GLUT5 transporter for d ‐fructose in breast cancer cells has been discussed intensely. In this contribution, high molar mass linear poly(ethylene imine) (LPEI) is functionalized with d ‐fructose moieties to combine the selectivity for the GLUT5 transporter with the delivery potential of PEI for genetic material. The four‐step synthesis of a thiol‐group bearing d ‐fructose enables the decoration of a cationic polymer backbone with d ‐fructose via thiol‐ene photoaddition. The functionalization of LPEI is confirmed by 2D NMR techniques, elemental analysis, and size exclusion chromatography. Importantly, a d ‐fructose decoration of 16% renders the polymers water‐soluble and eliminates the cytotoxicity of PEI in noncancer L929 cells, accompanied by a reduced unspecific cellular uptake of the genetic material. In contrast, the cytotoxicity as well as the cell specific uptake is increased for triple negative MDA‐MB‐231 breast cancer cells. Therefore, the introduction of d ‐fructose shows superior potential for cell targeting, which can be assumed to be GLUT5 dependent.

     

Separation of D‐psicose and D‐fructose using simulated moving bed chromatography

Simulated moving bed (SMB) processes have been widely used in the sugar industries with ion‐exchange resin as a stationary phase. D ‐Psicose, a rare monosaccharide known as a valuable pharmaceutical substrate, was synthesized by the enzymatic conversion from D ‐fructose. The SMB process was adopted to separate D ‐psicose from D ‐fructose. Before the SMB experiment, the reaction mixture including D ‐psicose and D ‐fructose was treated by a deashing process to remove contaminants, such as buffers, proteins, and other organic materials. Four columns packed with Dowex 50WX4‐Ca²⁺ (200–400 mesh) ion‐exchange resins were used in the four‐zone SMB. Single‐step frontal analysis was performed to estimate the isotherm parameters of each monosaccharide. The operating conditions of the SMB process were determined based on the Equilibrium Theory. According to the simulation of the SMB process, the purity and yield of extract product (D ‐psicose) achieved were 99.04 and 97.46%, respectively and those of raffinate product (D ‐fructose) were 99.06 and 99.53%, respectively. Under the optimized operating condition, complete separation (extract purity = 99.36%, raffinate purity = 99.67%) was achieved experimentally.     

The Chaperone‐like Activity and Structure of Mutant H119G of Rat Lens αB‐crystallin: A Study of Divalent Metal Ion Binding Site

The molecular chaperone αB‐crystallin, the major player in maintaining the transparency of the eye lens, preventing the aggregation of stress‐damaged and aging lens proteins from aggregation. In nonlenticular cells, it is involved in various neurological diseases, diabetes, and cancer. The role of some metal ions in the αB‐crystallin biology has been reported. Theoretical calculations have proposed that the coordination sites involving His101, His119, Lys121, His18 and Glu99 of human αB‐crystallin were the binding sites for divalent metal ions. Our previous mutagenesis study suggested that His18 rat lens αB‐crystallin is a crucial binding site for Cu(II) and Zn(II) in terms of chaperone‐like activity and structure. In this study mutant H119G of rat lens αB‐crystalin was cloned and expressed to investigate whether His119 is the coordination binding site. Copper and zinc at 1 mM concentration significantly increase the chaperone‐like activity in wild type αB‐crystalin, whereas zinc, copper and magnesium at 1 mM reduced the activity of H119G significantly. The results from chaperone‐like activity, ANS fluorescence measurement and Far‐and Near‐UV CD studies suggest that the replacement of His119 with Glycine resulted in a conformational and minor environmental changes that decrease chaperone‐like activity in the presence of divalent ions suggested that His119 was a crucial binding site for Cu(II) and Zn(II), which was similar to our previous study results of His18. Both results together suggest that His18 and His119 coordinates each other for the binding site of Cu(II) and Zn(II) in terms of improving the chaperone‐like activity and stability of crystallin/metal ion complex.     

Purification,Characterization and N‐terminal Sequence Analysis of Betel Leaf (Piper betle) Invertase

The present study is the first report describing the purification, enzymatic properties and N‐terminal amino acid sequence of a native invertase in betel leaf. The invertase was purified as a monomeric glycoprotein of molecular mass (Mr) 68 kDa. The enzyme was capable to attack β‐fructofuranoside linkages from the fructose end of sucrose, raffinose and stachyose indicating it as an authentic β‐D‐fructofuranosidase with high specificity for sucrose (Km 4.83 mM). The maximum activity was detected at pH 5.2 and 37 °C. Glucose and fructose showed typical inhibitory effect on the enzyme activity where as lectin was found to be effective activators of the enzyme. Significant inhibition by heavy metal ion Hg²⁺ and sulfhydryl group modifying agents suggesting that free sulfhydryl group containing amino acid, cysteine is necessary for the catalytic activity of the invertase. A BLAST search of the N‐terminal amino acid sequence of betel leaf invertase showed significant homology with the homologous invertases in database.     

Facile Synthesis of Cellulose Acetate Ultrafiltration Membrane with Stimuli‐Responsiveness to pH and Temperature Using the Additive of F127‐b‐PDMAEMA

We fabricate a novel cellulose acetate (CA) ultrafiltration membrane modified by block copolymer F127‐b‐ PDMAEMA, which is synthesized using F127 and DMAEMA via the ARGET ATRP method. Compared to conventional ultrafiltration membranes, the incorporation of both F127 and PDMAEMA can not only readily increase the hydrophilicity of the membrane, but also exhibit stimuli‐responsiveness to temperature and pH. Fourier transform infrared spectroscopy (FT‐IR), nuclear magnetic resonance spectroscopy (NMR), and gel permeation chromatography (GPC) are employed to analyze the structure of the F127‐b‐PDMAEMA. The membrane properties are evaluated via scanning electron microscope (SEM) imaging, porosity test, automatic target recognition Fourier transform infrared spectroscopy (ATR‐FTIR), water contact angle test and permeation test. The results indicate that the F127‐b‐PDMAEMA is an excellent pore agent, which contributes to an enhancement of the membrane in sensitivity to temperature and pH. The modified membrane also exhibits lower water contact angle (64.5°), which is attributed to the good anti‐fouling performance and high water permeation.     

Synthesis and properties of 1-trimethylsilylthia-2,2-bis(trimethylsilyloxy)ethene

A. E. Arbuzov Institute of Organic and Physical Chemistry, Kazan Branch, Russian Academy of Sciences, 420083 Kazan. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 3, p. 766, March, 1992.     

Synthesis of para‐[18F]Fluorofenbufen Octylamide for PET Imaging of Brain Tumors

Glioma is a brain tumor associated with a poor therapeutic outcome with an average life expectancy of 14 months. Cyclooxygenase‐2 (COX‐2) expression is associated with the progression of the tumor and is considered a therapeutic target of chemo agents. Para‐[¹⁸F]Fluorofenbufen octylamide ([¹⁸F]FFOA) was obtained with the radiochemical yield of 16% and specific activity of 4 GBq/μmol, and the IC₅₀ values of COX‐1 and COX‐2 were 26.5 and 32.7 μM, respectively. The stability of cold FFOA in plasma was significantly improved with a half‐life of 30 min, and the uptake ratio of [¹⁸F]FFOA in rats with brain tumor was 1.5 as determined from accumulation of 3.9% injection dose (ID/g) in the brain tumor and 2.5% ID/g in the brain. [¹⁸F]FFOA with COX‐2 micromolar affinity can be used to differentiate between brain tumor and normal region.     

The World Scientific Centers A. E. Arbuzov Institute of Organic and Physical Chemistry,Kazan Research Center of the Russian Academy of Sciences

Information

The World Scientific Centers A. E. Arbuzov Institute of Organic and Physical Chemistry, Kazan Research Center of the Russian Academy of Sciences     

S-trialkylsilyl- and s-trialkylstannyl-4-methoxyphenylphosphonotrithio- and dithioates

A. E. Arbuzov Institute of Organic and Physical Chemistry, Kazan Science Center, Russian Academy of Sciences, 420083 Kazan'. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 10, pp. 2457–2458, October, 1992.     

S,S-Alkyl S′-alkyl(4-methoxyphenyl)phosphonotrithiolothionates

A. E. Arbuzov Institute of Organic and Physical Chemistry, Kazan Science Center, Russian Academy of Sciences, 420083 Kazan. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 8, pp. 1932–1933, August, 1992.     

Photoelectronic spectrum and electronic structure of formaldehyde hydrazone

A. E. Arbuzov Institute of Organic and Physical Chemistry. Russian Academy of Sciences. Translated from Zhurnal Strukturnoi Khimii, Vol. 24, No. 2, pp. 172–173, March–April, 1993.     

Molecular structure of the reaction product of 1-butyl-1-dibutylboryl-2-diethylphosphino-2-phenylethene with carbon disulfide

Arbuzov Institute of Organic and Physical Chemistry, Kazan Scientific Center, Russian Academy of Sciences. Translated fromZhurnal Strukturnoi Khimii, Vol. 34, No. 3, pp. 165–168, May–June 1993.     

Bifunctional Polyacrylonitrile Fiber‐Mediated Conversion of Sucrose to 5‐Hydroxymethylfurfural in Mixed‐Aqueous Systems

A highly efficient catalytic system composed of a bifunctional polyacrylonitrile fiber (PANF‐PA[BnBr]) and a metal chloride was employed to produce 5‐hydroxymethylfurfural (HMF) from sucrose in mixed‐aqueous systems. The promoter of PANF‐PA[BnBr] incorporates protonic acid groups that promote the hydrolysis of the glycosidic bond to convert sucrose into glucose and fructose, and then catalyzes fructose dehydration to HMF, while the ammonium moiety may promote synergetically with the metal chloride the isomerization of glucose to fructose and transfer HMF from the aqueous to the organic phase. The detailed characterization by elemental analysis, FTIR spectroscopy, and SEM confirmed the rangeability of the fiber promoter during the modification and utilization processes. Excellent results in terms of high yield (72.8 %) of HMF, superior recyclability (6 cycles) of the process, and effective scale‐up and simple separation procedures of the catalytic system were obtained. Moreover, the prominent features (high strength, good flexibility, etc.) of the fibers are very attractive for fix‐bed reactor.     

Molecular and crystal structure of 2-amino-2-oxo-1,3,2-dioxaphosphorinane

A. E. Arbuzov Institute of Organic and Physical Chemistry, Kazan Scientific Center, Russian Academy of Sciences. Translated fromZhurnal Strukturnoi Khimii, Vol. 35, No. 1, pp. 143–146, January–February, 1994.     

Molecular structure of a series of epoxysulfolanes and products of their reaction with sodium azide

A. E. Arbuzov Institute of Organic and Physical Chemistry, Kazan' Science Center, Russian Academy of Sciences. Translated from Zhurnal Strukturnoi Khimii, Vol. 33, No. 1, pp. 145–150, January–February, 1992.     

聚乙烯醇/氟基蒙脱土纳米复合材料的合成及性能研究

采用水热方法,在493 K条件下反应72小时,合成了氟基蒙脱土(F-MMT),在这种F-MMT中,硅酸盐结构中的一些OH-被F-取代。采用溶液插层方法,制备了聚乙烯醇/F-MMT纳米复合材料(PVA/F-MMT)。采用X 射线衍射、扫描电镜和透射电镜对F-MMT 和 PVA/F-MMT纳米复合材料进行了表征;结果表明,片状结构的F-MMT均匀分散于PVA中,形成了层离结构的纳米复合材料。热重分析、力学性能和紫外可见光谱的测试结果表明,在没有牺牲光学性能情况下,PVA/F-MMT纳米复合材料的热稳定性和力学性能都得到了提高。力学和热学性能的提高归功于F-MMT均匀而好的分散于聚合物基体中,以及PVA中的 OH- 和F-MMT 中F-之间强的氢键作用。     

Molecular structure of 2-dimethylamino-2-thioxo-6-methyl-1,3,2-oxathiaphosphorinane

A. E. Arbuzov Institute of Organic and Physical Chemistry, Russian Academy of Sciences. Translated fromZhurnal Strukturnoi Khimii, Vol. 34, No. 5, pp. 185–188, September–October, 1993.     

Molecular structure of two substituted 2,7-dioxa-1-phosphabicyclo[3.2.0]hept-4-enes

A. E. Arbuzov Institute of Organic and Physical Chemistry, Kazan Science Center, Russian Academy of Science. Translated from Zhurnal Strukturnoi Khimii, Vol. 33, No. 5, pp. 145–147, September–October, 1992.     

Study of Factors Affecting the Performance of Voltammetric Copper Sensors Based on Gly‐Gly‐His Modified Glassy Carbon and Gold Electrodes

This paper reports a study of the factors affecting the analytical performance of gold and glassy carbon electrodes modified with the tripeptide Gly‐Gly‐His for the detection of copper ions. Gly‐Gly‐His is attached to a glassy carbon (GC) surface modified with 4‐carboxyphenyl moieties or a gold surface modified with 3‐mercaptopropionic acid by the reaction of the N‐terminal amine group of the peptide with the carboxylic acid groups of the monolayer via carbodiimide activation. X‐ray photoelectron spectroscopy was used to characterize the steps in the biosensor fabrication. It was found that the analytical performance of a sensor prepared with Gly‐Gly‐His on a GC electrode was similar to that on a gold electrode under the same conditions. The performance was greatly enhanced at higher temperature, no added salt during copper accumulation and longer accumulation time within a pH range of 7–9. Interference studies and investigations of stability of the Gly‐Gly‐His sensor are reported. Analysis of natural water samples show that the sensors measure only copper ions that can complex at the sensor surface. Strongly complexed copper in natural water is not measured. Despite greater stability of diazonium salt derived monolayers on carbon surfaces compared with alkanethiols self‐assembled monolayers on gold, the stability of the sensors was essentially the same regardless of the modification procedure.     

Template electrosynthesis of complexes of nickel with schiff bases

A suitable method is proposed for the electrosynthesis of complexes of nickel with Schiff bases containing a hydroxyl group (homogeneous catalysts of chemical and electrochemical reactions) in a single stage with a high material yield.A. E. Arbuzov Institute of Organic and Physical Chemistry, Russian Academy of Sciences, 420083 Kazan'. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 6, pp. 1435–1437, June, 1992.