Rotation about the C?N bond in 2-aza-1,3-butadiene and the N?N bond in 2,3-diaza-1,3 butadiene: A molecular orbital study

The geometry and energy of 2-aza-1,3-butadiene and 2,3-diaza-1,3-butadiene have been calculated using the 6-31G* basis set as a function of the CNCC and CNNC dihedral angles, respectively. With the 2-aza derivative potential minima are located at 0° (trans) and at about 130° for a gauche structure approximately 9.5 kJ mol^?1 less stable than the trans. Potential maxima are at about 75° giving a gauche barrier height of approximately 19 kJ mol^?1 relative to the trans structure, and at 180° (cis) giving a barrier height of approximately 14.5 kJ mol^?1 relative to the 130° gauche structure. With the 2,3-diaza derivative the gauche barrier has disappeared and there are a series of gauche structures in the region 70°–100° of almost equal energy 12.5-15 kJ mol^?1 less stable than the trans. In addition the cis barrier is much greater, nearly 70 kJ mol^?1 relative to the trans structure. Inclusion of electron correlation, accounting for about 50% of the correlation energy, produces no significant changes in the shape of the potential energy curves. There are systematic and progressive changes in almost all the geometrical parameters as the ?CH? groups in butadiene are replaced by ?N? . The outward tilt and compression within the methylene groups show adverse steric interactions to be operative in the cis structures. The values of V_nn indicate that gauche structures of both the 2-aza and the 2,3-diaza derivatives near the cis structure are more compact (as with butadiene), and gauche structures of the 2-aza derivative near the trans structure are less compact (as with butadiene). Originating in the changes in bond lengths and bond angles, rotation-independent nuclear–nuclear interactions again play an important role.     

Kinetics and mechanism of the shock induced thermal decomposition of n-propylsilane

The kinetics and mechanism of the thermal decomposition of n-propylsilane have been studied by the single pulse shock tube-comparative rate technique at pressures around 4700 torr between 1095–1240 K. The primary dissociation processes are 1,1 and 1,2 H₂ elimination with ø_1,1 ? 0.75 and ø_1,2 ? 0.25, respectively. Subsequent decompositions of the primary process product, n-propylsilylene, to propylene and ethylene is complete even in the presence of excess butadiene. Possible mechanistic paths for these decompositions are discussed and an activation energy range of 30 ± 4 kcal is established for both processes. Induced decomposition via silylene chains accounts for 36–46% of the overall reaction in the uninhibited decomposition of n-propylsilane. The silylene chains are quenched in excess butadiene, and studies under maximum inhibition give overall decomposition kinetics of, log k(nPrSiD₃, s^?1) = 15.26–65,300 ± 1950 cal/2.303. Computer modeling results of the overall reaction both in the absence and presence of butadiene are also presented and shown to be in acceptable agreement with the experimental observations.     

Novel,well‐defined polystyrene with a fluorine cluster end‐capped group: Synthesis,characterization, and surface properties

Novel, well‐defined fluorinated polystyrene was synthesized for the first time via the controlled radical polymerization of styrene through a relatively simple process and was characterized with ¹H NMR, ¹⁹F NMR, and gel permeation chromatography. The surface properties of polystyrene and poly(acrylonitrile‐co‐butadiene‐co‐styrene) films were modified with the obtained polymers. X‐ray photoelectron spectroscopy measurements of the air‐side surface composition of the modified poly(acrylonitrile‐co‐butadiene‐co‐styrene) films showed that fluorine enriched the outermost surface, resulting in fantastic surface properties that came close to those of poly(tetrafluoroethylene). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3853–3858, 2006     

Copolymerization of propylene with 1,3‐butadiene using isospecific zirconocene catalysts

Poly(propylene‐ran‐1,3‐butadiene) was synthesized using isospecific zirconocene catalysts and converted to telechelic isotactic polypropylene by metathesis degradation with ethylene. The copolymers obtained with isospecific C₂‐symmetric zirconocene catalysts activated with modified methylaluminoxane (MMAO) had 1,4‐inserted butadiene units ( 1,4‐BD ) and 1,2‐inserted units ( 1,2‐BD ) in the isotactic polypropylene chain. The selectivity of butadiene towards 1,4‐BD incorporation was high up to 95% using rac‐dimethylsilylbis(1‐indenyl)zirconium dichloride (Cat‐A)/MMAO. The molar ratio of propylene to butadiene in the feed regulated the number‐average molecular weight (M_n) and the butadiene contents of the polymer produced. Metathesis degradations of the copolymer with ethylene were conducted with a WCI₆/SnMe₄/propyl acetate catalyst system. The ¹H NMR spectra before and after the degradation indicated that the polymers degraded by ethylene had vinyl groups at both chain ends in high selectivity. The analysis of the chain scission products clarified the chain end structures of the poly(propylene‐ran‐1,3‐butadiene). © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5731–5740, 2007     

Polymerization and copolymerization of 2-phthalimidomethyl 1,3-butadiene. I. Preliminary studies of free radical polymerization and polymerizations initiated by various transition metal allyl complexes

2-Phthalimidomethyl 1,3-butadiene was homopolymerized and copolymerized with butadiene by free radical initiators; r₁ and r₂ were close to 1. All the attempts to polymerize 2PMB anionically have been unsuccessful. Preliminary studies of various η³-allylic catalysts showed that η³-allyl M₀(CO)₃OOCCF₃ initiates the polymerization of butadiene and is not sensitive to N-methyl phthalimide (NMP); neither does it initiate the copolymerization of butadiene and 2PMB. On the other hand, a catalyst that results from the reaction of allyl trifluoroacetate with nickel tetracarbonyl is efficient for the copolymerization of butadiene and 2PMB. η³-Allyl nickel trifluoroacetate was prepared in heptane or benzene and used in benzene or methylene chloride. In all cases it initiated the copolymerization of butadiene with 2PMB     

13C-Nuclear Magnetic Resonance Analysis of Some Essentially Random Copolymers of Methyl Methacrylate and Butadiene

20 MHz ¹³C-NMR (nuclear magnetic resonance) spectroscopy has been used to determine the relative concentrations of certain methacrylate and butadiene containing monomer sequence fractions in some essentially random free-radical copolymers of methyl methacrylate and butadiene. Several of the results are in good agreement with those obtained in an earlier ¹H-NMR study and confirm, within experimental error, that the copolymeriza-tion obeys first-order Markov statistics. The patterns of olefinic carbon resonances reveal that the progressive introduction of methacrylate units into the polymers slightly increases the trans-1,4- to cis-1,4 ratios of the butadiene units relative to that found for a pure polybutadiene prepared under similar conditions.     

Facile synthesis of a tricyclohexylphosphine‐stabilized η3‐allyl‐carboxylato Ni(II) complex and its relevance in electrochemical butadiene carbon dioxide coupling

With the reaction of bis(1,5‐cyclooctadiene)nickel(0) and trans‐penta‐2,4‐dienoic acid in the presence of tricyclohexylphosphine, a new more general method was developed to synthesize cyclic π³‐allyl‐carboxylato Ni(II) complexes, which are known to be intermediates in the C? C coupling of butadiene and CO₂. The cyclic π³‐allyl‐carboxylato Ni(II) complex obtained is tested as a mediator in the electrochemical coupling reaction of butadiene and carbon dioxide. We also demonstrate the dependency on the coordination sphere by using platinum instead of nickel as the metal center. Copyright © 2005 John Wiley & Sons, Ltd.     

Quantum-chemical simulation of unit process for the oxidation reactions of ethylene and its derivatives invoving <Superscript>1</Superscript>O<Subscript>2</Subscript> (<Superscript>1</Superscript>Δg)

The results of simulation of oxidation reactions of ethylene derivatives with different substituents (F atoms, CH₃O and CH₃ groups) and butadiene molecule with participation of ¹O₂ (¹Δg) have shown the possibility to realize different routes for the majority of the considered reactions. The largest product variety is obtained for butadiene and CH₃ derivatives of ethylene. For butadiene, along with 1,2-cycloaddition reactions resulting in four-membered dioxetane (which is realized in all cases), the possibility to form six-membered cyclic epidioxides (1,4-addition) and diepoxide products with two three-membered rings (epoxidation) has been found. The formation of hydroperoxide forms along with 1,2-addition reactions is also possible for all CH₃ derivatives of ethylene. Formation conditions and relative stability of the noted products have been analyzed for each case and certain features of the revealed reaction pathways with the transfer of two oxygen atoms have been discussed.     

Building up Strain in One Step: Synthesis of an Edge‐Fused Double Silacyclobutene from an Extensively Trichlorosilylated Butadiene Dianion

The exhaustive trichlorosilylation of hexachloro‐1,3‐butadiene was achieved in one step by using a mixture of Si₂Cl₆ and [nBu₄N]Cl (7:2 equiv) as the silylation reagent. The corresponding butadiene dianion salt [nBu₄N]₂[ 1 ] was isolated in 36 % yield after recrystallization. The negative charges of [ 1 ]^2? are mainly delocalized across its two carbanionic (Cl₃Si)₂C termini (α‐effect of silicon) such that the central bond possesses largely C=C double‐bond character. Upon treatment with 4 equiv of HCl, [ 1 ]^2? is converted into neutral 1,2,3,4‐tetrakis(trichlorosilyl)but‐2‐ene, 3 . The Cl^? acceptor AlCl₃, induces a twofold ring‐closure reaction of [ 1 ]^2? to form a six‐membered bicycle 4 in which two silacyclobutene rings are fused along a shared C=C double bond (84 %). Compound 4 , which was structurally characterized by X‐ray crystallography, undergoes partial ring opening to a monocyclic silacyclobutene 2 in the presence of HCl, but is thermally stable up to at least 180 °C.     

FDU-15-Pt composites with different Pt loading and their electrocatalytic reduction to ultratrace nitroaromatic compounds

FDU-15 is a hexagonal mesoporous material with nanometer-sized, highly ordered arrays and large special surface area. In this work, FDU-15-Pt with 2.0%, 5.0% and 8.0% Pt loading were synthesised and used for electrochemical detection of trace nitroaromatic compounds (NACs). The FDU-15-Pt samples were characterised by CO Chemisorption, transmission electron microscopy (TEM) and X-ray diffraction (XRD). It has been demonstrated that FDU-15-Pt with 2.0% Pt loading has the smallest Pt particle size of 2.9?nm, highest Pt metal dispersion of 37.7% and largest Pt metal surface area of 21.36?m^2?g^?1. The FDU-15-Pt/PDDA modified electrode were assembled by electrostatic adsorption of Poly (diallyldimethylammonium chloride) (PDDA) and FDU-15-Pt. The 2.0% FDU-15-Pt modified sensor showed higher selectivity for NACs than those of 5.0% and 8.0% FDU-15-Pt, which were verified by electrochemical experiments. A linear response over TNT concentration ranging from 8.8?×?10^?9?M to 1.2?×?10^?5 M was exhibited with a low detection limit of 2.9?×?10^?9?M (S/N?=?3). Moreover, the proposed 2.0% FDU-15-Pt/PDDA modified sensor has been applied to the detection of NACs in spiked environmental water samples and shows promise for fast and accurate determination of trace NACs in real samples.     

Vinylierung und 91Zr-NMR-Spektren von Substituierten Zirconocendichloriden

Vinylation and ⁹¹Zr N.M.R. Spectra of substituted Zirconocene Dichlorides Substituted zirconocene dichlorides react with vinyl lithium with formation of zirconacyclopent-2-enes, Cp₂ZrCH = CHCH₂CH₂, or zirconocene butadiene complexes, Cp₂Zr(C₄H₆). The compounds obtained were characterized by their ¹H and ¹³C n.m.r. spectra. The ⁹¹Zr n.m.r. chemical shifts of substituted zirconocene dichlorides correlate with the bond angles Cp′? Zr? Cp′ and Cl? Zr? Cl respectively. They can be used to estimate the reaction behaviour of zirconocene dichlorides.     

Ethene-butadiene copolymers by single-site catalysts

Constrained geometry catalysts ([Me₂Si(N^tBu)(Me₄Cp)]TiCl₂) were used to copolymerize ethene and 1,3-butadiene. It is possible to incorporate 17 mol% of butadiene, other catalyst systems such as CpTiCl₃/MAO show much lower incorporation. More than 300 000 kg of copolymer can be obtained by one mol of the catalysts in one hour. The microstructure of the copolymers has been investigated by ¹H- and ¹³C-NMR spectroscopy. The butadiene is incorporated mainly in 1,4-trans- and 1,2-structure. The high amount of 9-29% of vinyl groups offers the possibility of an easy vulcanisation. The molecular weights of these elastomers are high with values of 250 000. Important is the low glass transition temperature of −28 °C of a copolymer with 7 mol% of butadiene.     

Electrochemical behavior of adriamycin at an electrode modified with silver nanoparticles and multi-walled carbon nanotubes, and its application

An electrochemical sensor has been constructed for the determination of adriamycin (ADM) that is based on a glassy carbon electrode modified with silver nanoparticles and multi-walled carbon nanotubes with carboxy groups. The modified electrode was characterized by scanning electron microscopy and exhibits a large enhancement of the differential pulse voltammetric response to ADM. Signals are linear with the concentrations of ADM in the range from 8.2?×?10^?9 M to 19.0?×?10^?9 M, with a detection limit of 1.7?×?10^?9 M. The sensor is highly reproducible and exhibits excellent stability. It was to detect calf thymus DNA.     

The Radiation-Induced Polymerization and Copolymerization of Butadiene in Emulsion

Abstract

The polymerization of butadiene in emulsion initiated by ^{6 0}Co gamma radiation has been studied in some detail. Similar studies with styrene and styrene-butadiene comonomer mixtures were also conducted. The rates of polymerization were found to be much lower than anticipated from the reported k_p values for butadiene and for the comonomer mixtures. Styrene, on the other hand, polymerizes at normal rates. A number of possible explanations for this behavior is discussed.     

Reaction of the N‐heterocyclic carbene, 1,3‐dimesityl‐ imidazol‐2‐ylidene,with a uranyl triflate complex,UO2(OTf)2(thf)3

The N‐heterocyclic carbene, 1,3‐dimesityl‐imidazol‐2‐ylidene (IMes) reacts with tetrahydrofuran (THF) in the presence of an oxidizing uranyl triflate complex, UO₂(OTf)₂(thf)₃ (^?OTf = ^?OSO₂CF₃), to give 1,4‐bis(1,3‐dimesityl‐2‐imidazolium)‐1,3‐butadiene bis(trifluoromethanesulfonate), formally understood as the coupling product of two equivalents of IMes with [CH?CH? CH?CH](OTf)₂. Copyright © 2005 John Wiley & Sons, Ltd.     

Electrocatalytic Reduction of Nitrite Ion on a Toluidine Blue Sol‐Gel Thin Film Electrode Derived from 3‐Aminopropyl Trimethoxy Silane

An organically modified sol‐gel electrode using 3‐aminopropyltrimethoxy silane for covalent immobilization of a redox mediator namely toluidine blue has been reported. Cyclic voltammetric characterization of the modified electrode in the potential range of 0.2 V to ?0.6 V exhibited stable voltammetric behavior in aqueous supporting electrolyte with a formal potential of ?0.265 V vs. SCE, corresponding to immobilized toluidine blue. The electrocatalytic activity of the modified electrode when tested towards nitrite ion exhibited a favorable response with the electrocatalytic reduction of nitrite occurring at a reduced potential of ?0.34 V. A good linear working range from 2.94×10^?6 M to 2.11×10^?3 M with a detection limit of 1.76×10^?6 M and quantification limit of 5.87×10^?6 M was obtained for nitrite determination. The stable and quick response (4 s) of the modified electrode towards nitrite under hydrodynamic conditions shows the feasibility of using the present sensor in flow systems. Significant improvements in the operational stability by overcoming the leachability problem and repeatability with a relative standard deviation of 1.8% of the TB thin film sensor have been obtained by the strategy of immobilization of the mediator in the sol‐gel matrix.     

A new voltammetric sensor for the determination of sulfite in water and wastewater using modified-multiwall carbon nanotubes paste electrode

The electrochemical response of a modified-carbon nanotubes paste electrode with p-aminophenol was investigated as an electrochemical sensor for sulfite determination. The electrochemical behaviour of sulfite was studied at the surface of the modified electrode in aqueous media using cyclic voltammetry and square wave voltammetry. It has been found that under the optimum condition (pH 7.0) in cyclic voltammetry, the oxidation of sulfite occurs at a potential about 680?mV less positive than that of an unmodified-carbon nanotubes paste electrode. Under the optimized conditions, the electrocatalytic peak current showed linear relationship with sulfite concentration in the range of 2.0?×?10^?7–2.8?×?10^?4?mol?L^?1 with a detection limit of 9.0?×?10^?8?mol?L^?1 sulfite. The relative standard deviations for ten successive assays of 1.0 and 50.0?µmol?L^?1 sulfite were 2.5% and 2.1%, respectively. Finally, the modified electrode was examined as a selective, simple and precise new electrochemical sensor for the determination of sulfite in water and wastewater samples.     

Influence of the interphase on block copolymer thermodynamics: Extension of the leary model

The Leary–Williams model for the microphase thermodynamics of triblock ABA copolymers has been modified to accommodate deviations from homogeneous random-coil configurations in the B-chain dimensions as well as in those of the A chains, and has also been extended to cover the case of diblock AB copolymers. Only planar morphology is considered, but qualitative conclusions reported herein are expected to hold for other morphologies as well. The focus is on interphase thickness ΔT, with predictions made also for separation temperature T_s and planar repeat distance D. Results are presented as systematic functions of copolymer composition (0 ≤ ?_A ≤ 1), total molar volume (25,000 ≤ ? ≤ 4 × 10⁶ cm³/g mol), block architecture (AB vs. ABA), temperature (298, 373 K), and for five different interphase composition profiles. In most cases, A represents a polystyrene block and B a butadiene block in these calculations. Predictions for ΔT increase with temperature and depend on architecture, profile, and ?; comparisons with data are close, in the range 15–30Å. It is shown that T_s depends strongly on profile choice and ?_A, reaching a maximum in the ?_A midrange but always with ?_A > 0.5. The major parameter influencing D (at constant ?) is architecture, with D(SB) ≈ 2D(SBS), and D(?) varies from D ∝ ?^0.75 at low ? to D ∝ ?^0.5 at high ?.     

Characterization of Bioimprinted Tannase and Its Kinetic and Thermodynamics Properties in Synthesis of Propyl Gallate by Transesterification in Anhydrous Medium

Tannase has been extensively applied to synthesize gallic acid esters. Bioimprinting technique can evidently enhance transesterification-catalyzing performance of tannase. In order to promote the practical utilization of the modified tannase, a few enzymatic characteristics of the enzyme and its kinetic and thermodynamics properties in synthesis of propyl gallate by transesterification in anhydrous medium have been studied. The investigations of pH and temperature found that the imprinted tannase holds an optimum activity at pH?5.0 and 40?°C. On the other hand, the bioimprinting technique has a profound enhancing effect on the adapted tannase in substrate affinity and thermostability. The kinetic and thermodynamic analyses showed that the modified tannase has a longer half-time of 1,710?h at 40?°C; the kinetic constants, the activation energy of reversible thermal inactivation, and the activation energy of irreversible thermal inactivation, respectively, are 0.054?mM, 17.35?kJ?mol^?1, and 85.54?kJ?mol^?1 with tannic acid as a substrate at 40?°C; the free energy of Gibbs (??G) and enthalpy (??H) were found to be 97.1 and 82.9?kJ?mol^-1 separately under the same conditions.