Preparation of thermoresponsive and pH-sensitivity polymer magnetic hydrogel nanospheres as anticancer drug carriers

In this work, a novel thermo and pH responsive magnetic hydrogel nanosphere poly(N-isopropylacrylamide-co-acrylic acid)/Fe(3)O(4) (poly(NIPAAm-co-AA)/Fe(3)O(4)) has been successfully prepared. The magnetic hydrogel nanospheres with thermo and pH-sensitivity were characterized by transmission electron microscopy (TEM), dynamic light scattering (DLS), Fourier transform infrared-spectrometer (FT-IR), UV-vis absorption spectroscopy, and vibrating sample magnetometer (VSM). The magnetic hydrogel nanospheres exhibited uniform sphere structures and superparamagnetic property. Finally, the drug loading capacities and the releasing behavior of the magnetic hydrogel nanospheres were investigated with doxorubicin hydrochloride (DOX) as an anticancer drug model. The resulting magnetic hydrogel nanospheres exhibited high encapsulation efficiency (95%) to DOX under an appropriate condition. In vitro release experiments revealed that release was faster at pH 5.3 (37°C) than at pH 7.4 (25°C) or pH 7.4 (37°C). The DOX-loaded magnetic hydrogel nanospheres also showed enhanced anticancer effect compared with the free drug in vitro. These presented results suggested that the magnetic hydrogel nanospheres have a potential as tumor targeting drug carrier.     

Amphiphilic hydrogel nanoparticles. Preparation, characterization, and preliminary assessment as new colloidal drug carriers

Inverse emulsion photopolymerization of acrylated poly(ethylene glycol)-bl-poly(propylene glycol)-bl-poly(ethylene glycol) and poly(ethylene glycol) was successfully employed to prepare stable, cross-linked, amphiphilic nanoparticles. Even at low emulsifier concentrations (2%) and high water-to-hexane weight ratios (35/65), the stability of the inverse emulsion allowed for the formation of well-defined colloidal material. Inverse emulsion characteristics and polymerization conditions could be controlled to vary the size of the nanoparticles between 50 and 500 nm. The presence of hydrophobic nanodomains within these otherwise hydrophilic nanoparticles was verified by using pyrene as a microenvironmentally sensitive probe. The hydrophobic poly(propylene glycol)-rich domains appear to be suitable for incorporation of hydrophobic drugs, encapsulating Doxorubicin up to 9.8% (w/w). We believe that the complex nano-architecture of these materials makes them a potentially interesting colloidal drug delivery carrier system and that the method should be useful for a number of amphiphilic macromolecular precursors.     

Chitosan surface modified hydrogel as a therapeutic contact lens

Therapeutic contact lenses have attracted significant attention during the last decades. In this study, we used chitosan‐conjugated poly(2‐hydroxyethyl methacrylate) (PHEMA) for contact lens application. We aimed to increase affinity of anionic drugs, which are used in treatment of eye diseases. In this regard, we evaluated delivery of the small molecule anionic drug, ascorbic acid from the chitosan‐conjugated PHEMA. Chitosan immobilization improves drug loading efficiency and induces sustained release of ascorbic acid. The chitosan modified hydrogel also reduces the biofouling of tear fluid components. Our results showed that surface modification by chitosan inhibits protein and bacterial deposition on the contact lens. Protein absorption analysis revealed that neat PHEMA adsorbed tear proteins at a density of 28.4 ± 4.4 μg/cm², whereas the chitosan‐conjugated hydrogel adsorbed tear proteins at a density of 18.5 ± 1.8 μg/cm². Moreover, the neat PHEMA bacterial adhesion had a mean CFU value of 273 ± 27. However, a significant decrease in the number of bacterial colonies was observed in the chitosan group with a CFU value of 9 ± 6.     

Chitosan microspheres as a delivery system for nasal insufflation

The strain SmSA, identified as Serratia marcescens and known as a biosurfactant producer, was isolated from hydrocarbon contaminated soil from Veracruz, México. The interactions among the C/N, C/Mg and C/Fe ratios have not been examined for this microorganism. In this work was evaluated the effect of these nutrients at three levels using a mineral medium with glucose as the carbon source. A Box-Behnken experimental design was utilised to maximise biosurfactant production, which was assessed by oil spreading and surface tension tests. The treatment with C/N=5, C/Fe=26,000 and C/Mg=30 showed the best result since the surface tension was reduced to 30 mN m(-1). The multiple regression and response surface analyses indicated that the interaction between C/N and C/Mg had the utmost effect on the reduction of surface tension and biosurfactant production. The conditions of the best treatment were used to scale up biosurfactant production in a 3L bioreactor giving a yield of 4.1 gL(-1) of pure biosurfactant. It was found that the biosurfactant was mainly produced in the exponential phase and decreased the surface tension to 31 mN m(-1). The contact between the biosurfactant with heavy oil (15° API) increased its displacement from 9.3 to 18 cm.     

Controllable exploding microcapsules as drug carriers

Controllable exploding polyelectrolyte microcapsules were developed by layer-by-layer assembly of poly(allylamine hydrochloride) (PAH) and poly(sodium 4-styrenesulfonate) (PSS) on a dextran microgel core containing a cleavable disulfide bond fabricated via click chemistry. The microcapsules can explode upon the injection of DTT with an explosive release of the drug.     

Microgels as drug carriers for sonopharmacology

The ultrasound-induced cleavage of covalent and non-covalent bonds to activate drugs (sonopharmacology) is a promising concept to gain control over the action of active pharmaceutical ingredients by an external trigger. Previously, linear polymer architectures bearing drug payloads were exploited for drug release by using the principles of polymer mechanochemistry. In this work, the carrier design is altered by the polymer topology to improve the ultrasound-triggered release of covalently anchored drugs from polymer scaffolds. We use microgels crosslinked by mechanoresponsive disulfides and copolymerized with Diels-Alder adducts of furylated payload molecules and acetylenedicarboxylate. Force-induced thiol formation induces a Michael-type addition liberating the payload from the microgels. The use of microgels significantly reduces sonication times compared to linear polymer chains and shields the cargo efficiently from non-triggered activation using ultrasound that produces inertial cavitation at a frequency of 20 kHz as model condition.     

New unsaturated polyesters as injectable drug carriers

New unsaturated polyesters of poly(fumaric acid-glycol-sebacic acid) copolymers and poly(maleic anhydride-glycol-sebacic acid) copolymers were prepared by melt polycondensation of the corresponding mixed monomers: sebacic anhydride, fumaric acid or maleic anhydride and glycol. Methyl-methacrylate (MMA) was used as crosslinker and dimer acid was used as thinner.In vitro studies showed that those copolymers are degradable in phosphate buffer at 37 °C and poly(fumaric acid-glycol-sebacic acid) has proper drug release rate as drug carriers. The biocompatibility of poly(fumaric acid-glycol-sebacic acid) copolymers under mice skin was also evaluated; macroscopic observation and microscopic analysis demonstrated that the copolymer is biocompatible and well tolerated in vivo. The injected poly(fumaric acid-glycol-sebacic acid) [molar ratio M_{fumaric acid}:M_glycol:M_{sebacic acid} = 1.75:2.20:0.25] containing 5% adriamycin hydrochloride (ADM) in the mice bearing Sarcoma-180 tumor exhibited a good antitumor efficacy. The volume doubling time (VDT) (18 ± 2.5 days) of the tumor growth by this treatment was longer than that (7 ± 0.9 days) by the subcutaneous injection of ADM.     

Luminescent porous silica fibers as drug carriers

Luminescent and porous silica fibers have been successfully prepared by using the electrospinning process. The obtained multifunctional silica fibers, which possess a porous structure and display blue luminescence, can serve as a drug delivery host carrier, using ibuprofen (IBU) as a model drug, allowing the investigation of storage/release properties. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FT-IR), N(2) adsorption/desorption, photoluminescence (PL) spectra, and kinetic decay were used to characterize the structural, morphological, and optical properties of the as-obtained samples. The results reveal that the multifunctional silica materials exhibit an irregular porous structure, and display a fiberlike morphology with dimensions of several hundred nanometers in width and several millimeters in length. The obtained silica fibers exhibit an intense broad bluish emission, which might be attributed to impurities and/or defects in the silica fibers. The IBU-loaded silica fiber system shows blue luminescence under UV irradiation and controlled release behavior for IBU. In addition, the emission intensities of silica fibers in the drug carrier system vary with the released amount of IBU, thus allowing the drug release to be easily tracked and monitored by the change of the luminescence intensity.     

Chitosan/cyclodextrin nanoparticles as drug delivery system

One of the most attractive areas of research in drug delivery is the design of nanomedicines consisting of nanosystems that are able to deliver drugs to the right place, at appropriate time. Natural polysaccharides, due to their outstanding merits, have received more and more attention in the field of drug delivery systems. In particular, polysaccharides seem to be the most promising materials in the preparation of nanometric carriers. The main goal of the present study was to investigate the potential of a recent generation of hybrid polysaccharide nanocarriers, composed of chitosan (CS) and an anionic cyclodextrin, carboxymethyl-β-cyclodextrin (CM-β-CD), for the encapsulation of a model drug, sulindac. CS and CM-β-CD were processed to nanoparticles (NPs) via the ionotropic gelation technique. The stoichiometric ratio between these two polymers was found to influence particle size and zeta potential. Decreasing CS:CM-β-CD ratio led to an increase in particle size and decrease in zeta potential. DSC and FTIR analyses confirmed formation of NPs and encapsulation of sulindac inside them. Release profiles indicate a continuous release of the drug throughout 24?h. However, the rate of release was more rapid during the first hours; about 55–90% of the drug being released after 3?h.     

Surfacial modification of polymer powders as drug carriers

Preparation of warfarin methacrylate(WaMA) was carried out by esterification of warfarin as thromboembolism drug with methacryloyl chloride. Radical copolymerization of WaMA with 1-vinyl-2-pyrrolidone(VPr) was carried out in 1,4-dioxane at 60°C using 2,2′-azoisobutyronitrile as initiator. The surfacial modification of the copolymer powders was achieved using the freeze-drying by dissolving the copolymer in benzene and micellation by benzene-in-water and water-in-benzene systems. The hydrolysis of the copolymer including the drug was investigated under mild condition from a view point of released rate of the drug.     

pH‐sensitive polymeric micelles based on amphiphilic polypeptide as smart drug carriers

A series of amphiphilic diblock copolymers having poly(ethylene glycol) (PEG) as one block and a polypeptide as the other block were synthesized by ring‐opening polymerization using PEG‐amine as a macroinitiator. These polymers were characterized by ¹H‐NMR and gel permeation chromatography. The influence of the substitution ratio of tertiary amine‐containing groups on the pH sensitivity of the polymers was investigated in detail. Core/shell‐structured micelles were fabricated from these polymers using an organic solvent‐free method. pH‐ and concentration‐dependent micellization behaviors were investigated by dynamic light scattering and fluorescence microscopy. Micelles loaded with doxorubicin, selected as a model drug, showed restricted drug release at physiological pH but accelerated drug release at tumor extracellular pH. Collectively, our findings suggest that these pH‐sensitive micelles might have great potential for cancer therapy applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4175–4182     

Chitosan hydrogel,as a biological macromolecule-based drug delivery system for exosomes and microvesicles in regenerative medicine: a mini review

Cellulose - Extracellular vesicles are membrane-packed entities that are involved in various physiological and pathological processes. Recently, the role of exosomes and microvesicles in...     

Chitosan bio-based organic-inorganic hybrid aerogel microspheres

Recently, organic-inorganic hybrid materials have attracted tremendous attention thanks to their outstanding properties, their efficiency, versatility and their promising applications in a broad range of areas at the interface of chemistry and biology. This article deals with a new family of surface-reactive organic-inorganic hybrid materials built from chitosan microspheres. The gelation of chitosan (a renewable amino carbohydrate obtained by deacetylation of chitin) by pH inversion affords highly dispersed fibrillar networks shaped as self-standing microspheres. Nanocasting of sol-gel processable monomeric alkoxides inside these natural hydrocolloids and their subsequent CO(2) supercritical drying provide high-surface-area organic-inorganic hybrid materials. Examples including chitosan-SiO(2), chitosan-TiO(2), chitosan-redox-clusters and chitosan-clay-aerogel microspheres are described and discussed on the basis of their textural and structural properties, thermal and chemical stability and their performance in catalysis and adsorption.     

Interactions between temperature-sensitive hydrogel microspheres and granulocytes

Poly(N-isopropylacrylamide) (PNIPAM) has a low critical solution temperature (LCST) at 32°C in water and the hydrophilicity changes through the LCST. The microspheres whose surface was composed of PNIPAM exhibited phase transition behavior around 32°C. Therefore, the interactions between PNIPAM micropheres and granulocytes depended on the temperature. That is, the oxygen consumption and active oxygen production by cells in contact with PNIPAM-containing microspheres and adhesion of the microspheres to the cell surface were more enhanced above the LCST of PNIPAM than below it, whereas no significant temperature dependence of cell–microspheres interaction was observed in nonthermosensitive microsphere systems. It was suggested that the function of cells could be controlled with temperature using the temperature-sensitive microspheres.     

Biomimetic color-changing skin based on temperature-responsive hydrogel microspheres with the photonic crystal structure

The responsive color-changing bionic skin imitation of certain organisms such as chameleons has potential applications in the fields of chemical sensing and information transfer. Inspired by the cellular structure of the chameleon iridophores, a flexible and scalable fabrication strategy was proposed in the present study, which centers on the modular assembly of miniature color-changing pixel dots. The color-changing pixel dots were formed by self-assembling charged silica particles inside hydrogels and fabricated in bulk using microfluidic methods. The pixel dots were immobilized in hydrogels to encapsulate in a membrane structure similar to biological skin. With thermal stimulation, the bionic color-changing skin can change color from green to red and has an angle-independent color display with good environmental adaptability.     

Colored thin films prepared from hydrogel microspheres

Ordered 2-D structures composed of poly(N-isopropylacrylamide) (PNIPAM) microgel particles that had regularity on a sub-micrometer length scale were prepared. By using sterically stabilized PNIPAM microgel particles as components, the ordered array was formed by a self-assembly process. The particle array was prepared by depositing a droplet of the microgel dispersion on a substrate. Atomic force microscopy observation of the resulting thin films revealed that they comprised a monolayer particle array. The periodic structure of the array produced iridescent colors due to optical diffraction. Since a homogeneous particle array can be prepared simply by drying the dispersion, this particle dispersion may be considered as a new ink whose color is generated from the microstructure in the films produced.     

Hydrogel microspheres III. Temperature-dependent adsorption of proteins on poly-N-isopropylacrylamide hydrogel microspheres

Precipitation polymerization of N-isopropylacrylamide (NIPAM) with methylenebisacrylamide (MBAAm) in water at 70°C gave thermosensitive hydrogel microspheres. The adsorbability of proteins on the poly-NIPAM microspheres was found to depend on temperature. Below the lower critical solution temperature (LCST) of poly-NIPAM in an aqueous medium, that is, around 32°C, the microspheres hold a large amount of water inside and their surface is hydrophilic enough to suppress the adsorption of proteins. On the contrary, above 32°C, the micropheres deswell and their surface becomes hydrophobic and, consequently, susceptible to adsorption of a large amount of proteins. Proteins once adsorbed on the microspheres at a high temperature could be desorbed more or less by lowering the temperature to below 32°C. The extent of desorption at low temperatures was found to depend on the incubation time for adsorption at high temperatures.     

Self-assembled vesicles prepared from amphiphilic cyclodextrins as drug carriers

Controlled self-assembly of amphiphilic cyclodextrin is always a challenging topic in the field of supramolecular chemistry, since it provides the spontaneous generation of well-defined aggregation with functional host sites with great potential applications in drug-carrier systems. β-Cyclodextrin modified with an anthraquinone moiety (1) was successfully synthesized. In the aqueous solution, 1 was found able to self-assemble into vesicles, which was characterized in detail by TEM, SEM, EFM, and DLS. The formation mechanism of the vesicles was suggested based on the 2D ROESY and UV-vis results, and further verified by the MD simulation. Subsequently, the stimuli response property of the vesicles, including to Cu(2+) and H(+), was also studied. The vesicles can efficiently load Paclitaxel inside the membrane with functional macrocyclic cavities available, which can further carry small molecules, such as ferrocene. The vesicles loading with Paclitaxel have remarkable anticancer effects. This work will provide new strategy in drug-carrier systems and tumor treatment methods.     

Preparation of luminescent and mesoporous Eu3+/Tb3+ doped calcium silicate microspheres as drug carriers via a template route

Luminescent and mesoporous Eu(3+)/Tb(3+) doped calcium silicate microspheres (LMCS) were synthesized by using mesoporous silica spheres as the templates. The LMCS and drug-loaded samples were characterized by means of X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), N(2) adsorption/desorption, and photoluminescence (PL) spectra. The results reveal that the LMCS have uniform spherical morphology with a diameter around 400 nm and the mesopore size of 6 nm. The prepared samples exhibit little cytotoxicity at concentrations below 5 mg mL(-1) via MTT assay. In addition, drug storage/release properties of the LMCS were demonstrated for ibuprofen (IBU). The obtained LMCS can be used to encapsulate drugs and release them. Under excitation by UV light, the IBU-loaded samples still show the characteristic (5)D(0)-(7)F(1-3) emission lines of Eu(3+) and the characteristic (5)D(4)-(7)F(3-6) emission lines of Tb(3+). The PL intensity of Eu(3+) in the drug carrier system increases with the cumulative released amount of IBU, making the drug release able to be tracked or monitored by the change of luminescence of Eu(3+). The LMCS reported here with mesoporous structure, good biocompatibility and luminescent property can be a promising drug delivery carrier.