Controlled synthesis of styrene and methyl methacrylate copolymers in the presence of reversible addition-fragmentation chain-transfer agents

Molecular-mass characteristics of styrene-methyl methacrylate copolymers formed via the reversible addition-fragmentation chain transfer copolymerization mediated by dithiobenzoates have been studied. Low-molecular-mass reversible-addition fragmentation chain-transfer agents active in the homopolymerization of both monomers and in the homopolymerization of only one of the monomers (styrene) can be used for the controlled synthesis of narrow dispersed copolymers. Conditions for the synthesis of narrow dispersed block copolymers with the desired structure and molecular mass of the blocks have been found. The polymer reversible addition fragmentation chain-transfer agent determines the composition and molecular mass of the first block. The structure of the second block is defined by the composition of the monomer mixture, and the molecular-mass characteristics are set by the concentration of the agent and the conversion of monomers.     

Controlled synthesis of multiblock copolymers by pseudoliving radical polymerization via the reversible addition-fragmentation chain-transfer mechanism

With the use of two classes of reversible addition-fragmentation chain-transfer agents??dithiobenzoates and trithiocarbonates??multiblock copolymers based on styrene and n-butyl acrylate, which are the best-studied monomers in these processes, are synthesized. It is shown that the polymers containing dithiobenzoate and trithiocarbonate groups are highly efficient for the synthesis of block copolymers, which is independent of the number of stages at which the polymeric RAFT agents are used in polymerization: In all cases, the polymeric RAFT agent is fully consumed in the polymerization of the ??alien?? monomer. The mechanism governing chain formation during the synthesis of multiblock copolymers, that is, the character of monomer insertion into the polymer chain, via one or both ends, is studied. It is found that the order of monomer loading determines the ratio of chains growing through one or two ends. The thermal stability of amphiphilic multiblock copolymers, their solubility in various solvents, and self-organizing ability are investigated.     

Emulsion copolymerization of styrene and methyl methacrylate

Chain transfer constants to monomer have been measured by an emulsion copolymerization technique at 44°C. The monomer transfer constant (ratio of transfer to propagation rate constants) is 1.9 × 10^?5 for styrene polymerization and 0.4 × 10^?5 for the methyl methacrylate reaction. Cross-transfer reactions are important in this system; the sum of the cross-transfer constants is 5.8 × 10^?5. Reactivity ratios measured in emulsion were r₁ (styrene) = 0.44, r₂ = 0.46. Those in bulk polymerizations were r₁ = 0.45, r₂ = 0.48. These sets of values are not significantly different. Monomer feed compcsition in the polymerizing particles is the same as in the monomer droplets in emulsion copolymerization, despite the higher water solubility of methyl methacrylate. The equilibrium monomer concentration in the particles in interval-2 emulsion polymerization was constant and independent of monomer feed composition for feeds containing 0.25–1.0 mole fraction styrene. Radical concentration is estimated to go through a minimum with increasing methyl methacrylate content in the feed. Rates of copolymerization can be calculated a priori when the concentrations of monomers in the polymer particles are known.     

Synthesis of photochromic liquid-crystalline triblock copolymers by pseudoliving reversible addition-fragmentation chain-transfer polymerization

Symmetric photosensitive fully liquid-crystalline triblock copolymers are synthesized by pseudo-living reversible addition-fragmentation chain-transfer radical polymerization for the first time. The polymerization of 3-[methyl(phenyl)amino]propyl acrylate mediated by three different symmetric trithiocarbonates with various leaving groups is studied. It is shown that reversible addition-fragmentation chain-transfer agents make it possible to synthesize narrowly dispersed homopolymers with controlled molecular masses. Poly[(3-[methyl(phenyl)amino]propyl acrylate) trithiocarbonates] are used as polymeric reversible addition-fragmentation chain-transfer agents in the block copolymerization of the phenyl benzoate acrylic monomer. The chemical modification of block copolymers yields desirable photosensitive triblock copolymers containing azobenzene groups. The effect of the molecular structure of triblock copolymers on their phase behavior and thermal properties is examined.     

Controlled copolymerization of acrylonitrile in bulk via the reversible addition-fragmentation chain-transfer mechanism

The pseudoliving radical binary copolymerization of acrylonitrile with methyl acrylate, styrene, n-butyl acrylate, and tert-butyl acrylate in bulk in the presence of the reversible addition-fragmentation chain-transfer agent dibenzyl trithiocarbonate is performed for the first time. The addition of trithiocarbonate makes it possible to prepare a narrowly dispersed visually optically transparent copolymer in a wide range of monomer-feed compositions even at limiting conversions. Conditions for the synthesis of acrylonitrile copolymers with controlled molecular masses and narrow molecular-mass distributions are ascertained. In the above copolymers, the trithiocarbonate group is shown to be located within the chain.     

Controlled free-radical copolymerization of maleic anhydride and divinyl ether in the presence of reversible addition-fragmentation chain-transfer agents

The free-radical alternating cyclocopolymerization of maleic anhydride and divinyl ether is studied at 60–80°C in the presence of benzyl dithiobenzoate and dibenzyl trithiocarbonate as reversible addition-fragmentation chain-transfer agents. It is shown that the structure of the repeating unit of the cyclocopolymer prepared in the presence of a reversible addition-fragmentation chain-transfer agent coincides with the structure of the repeating unit of the copolymer synthesized under the conditions of conventional free-radical cyclocopolymerization. When the cyclocopolymer is used as a reversible addition-fragmentation chaintransfer agent, a successive increase in the molecular mass of the copolymer with conversion and formation of the block copolymer in the polymerization of styrene are unambiguous evidence that the copolymerization proceeds according to the pseudoliving radical mechanism.     

Modeling of unseeded emulsion copolymerization of styrene and methyl methacrylate

A mathematical model for the unseeded emulsion copolymerization of styrene and methyl methacrylate has been developed. This model, which includes a new rate coefficient for radical desorption, was used to analyze the effect of the styrene/methyl methacrylate molar ratio in the initial charge on the number of particles, overall conversion and copolymer composition. It was found that the number of particles increased with the methyl methacrylate content and that a drift of the copolymer composition resulted during the polymerization of styrene/methyl methacrylate molar ratios other than 50/50. Good agreement between experimental results and model predictions was achieved.     

Reversible addition–fragmentation transfer (RAFT) copolymerization of methyl methacrylate and styrene in miniemulsion

In the reversible addition–fragmentation transfer (RAFT) copolymerization of two monomers, even with the simple terminal model, there are two kinds of macroradical and two kinds of polymeric RAFT agent with different R groups. Because the structure of the R group could exert a significant influence on the RAFT process, RAFT copolymerization may behave differently from RAFT homopolymerization. The RAFT copolymerization of methyl methacrylate (MMA) and styrene (St) in miniemulsion was investigated. The performance of the RAFT copolymerization of MMA/St in miniemulsion was found to be dependent on the feed monomer compositions. When St is dominant in the feed monomer composition, RAFT copolymerization is well controlled in the whole range of monomer conversion. However, when MMA is dominant, RAFT copolymerization may be, in some cases, out of control in the late stage of copolymerization, and characterized by a fast increase in the polydispersity index (PDI). The RAFT process was found to have little influence on composition evolution during copolymerization. The synthesis of the well‐defined gradient copolymers and poly[St‐b‐(St‐co‐MMA)] block copolymer by RAFT miniemulsion copolymerization was also demonstrated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6248–6258, 2004     

Photosensitized copolymerization of optically active N-l-menthylmaleimide with styrene and methyl methacrylate

Photosensitized copolymerization of optically active N-l-menthylmaleimide (NMMI) with styrene (Sty) and methyl methacrylate (MMA) was carried out in tetrahydrofuran (THF) at 30°C with benzoyl peroxide (BPO). The monomer reactivity ratios for the copolymerization of NMMI (M₂) with Sty (M₁) and MMA (M₁) were r₁ = 0.08 ± 0.10, r₂ = 0.20 ± 0.05 and r₁ = 2.85 ± 0.06, r₂ = 0.07 ± 0.06, respectively. Copoly-MMA–NMMI and poly-NMMI showed positive circular dichroism(CD) curves of equal intensity and shape over the wavelength region from 230 to 270 nm; copoly-Sty–NMMI also showed a positive CD curve which was similar in shape but was different in intensity from that of poly-NMMI. The correlation between monomer unit ellipticity of the copolymers and their composition would suggest the alternating and stereoregular copolymerization of NMMI with Sty.     

Kinetics of free-radical copolymerization of α-methylstyrene and styrene

The free-radical copolymerization of α-methylstyrene and styrene has been studied in toluene and dimethyl phthalate solutions at 60°C. Gas chromatography was used to monitor the rate of consumption of monomers. For styrene alone, the measured rate of polymerization R_p and M?_n of the polymer coincided with values expected from previous studies by other workers. Solution viscosity η affected R_p and M?_n of styrene homopolymers and copolymers as expected on the basis of an inverse proportionality between η^1/2 and termination rate. The rate of initiation by azobisisobutyronitrile appears to be independent of monomer feed composition in this system. Molecular weights of copolymers can be accounted for by considering combinative termination only. The effects of radical chain transfer are not significant. A theory is proposed in which the rate of termination of copolymer radicals is derived statistically from an ideal free-radical polymerization model. This simple theory accounts quantitatively for R_p and M?_n data reported here and for the results of other workers who have favored more complicated reaction models because of the apparent failure of simple copolymer reactivity ratios to predict polymer composition. This deficiency results from systematic losses of low molecular weight copolymer species in some analyses. Copolymer reactivity ratios derived with the assumption of a simple copolymer model and based on rates of monomer loss can be used to predict R_p values measured in other laboratories without necessity for consideration of depropagation or penultimate unit effects. The 60°C rate constants for propagation and termination in styrene homopolymerization were taken to be 176 and 2.7 × 10⁷ mole/l.-sec, respectively. The corresponding figures for α-methylstyrene are 26 and 8.1 × 10⁸ mole/l.-sec. These constants account for the sluggish copolymerization behavior of the latter monomer and the low molecular weights of its copolymers. The simple reaction scheme proposed here suggests that high molecular weight styrene–α-methylstyrene copolymers can be produced at reasonable rates at 60°C by emulsion polymerization. This is shown to be the case.     

Free-radical copolymerization of methyl methacrylate with styrene in the presence of 2-mercaptoethanol II. Influence of methyl methacrylate/styrene ratio

The free-radical copolymerization of methyl methacrylate (MMA) with styrene (St) in the presence of 2-mercaptoethanol (ME) was investigated in order to obtain ω-hydroxy oligomers with random copolymer-type chains of various compositions and molecular weights. Polymerizations at three different MMA/St molar ratios were carried out, while keeping constant the ME/monomer ratio. Monomer mixtures richer in MMA than in St were employed in order to attempt preparing lower polydispersity oligomers with monomodal molecular weight distribution (MWD). The molecular weights of the resulting oligomers increased with both conversion and MMA fraction in the feed, while polydispersities increased with conversion and decreased with MMA concentration in the initial monomer mixture. For the lower MMA fractions in the monomer feed, bimodal MWDs resulted beyond a certain conversion due to the faster relative consumption of ME than of monomer. Based on the pseudo-kinetic rate constant method, apparent chain transfer constants corresponding to the three different compositions of the monomer feed were estimated. The values obtained were in good agreement with the evolution of molecular weights and polydispersities with conversion and MMA fraction in the monomer feed. The co-oligomers prepared displayed functionalities around unity, making them suitable for the synthesis of macromonomers.     

Organostibine mediated controlled/living random copolymerization of styrene and methyl methacrylate

The first example of organostibine mediated controlled/living random copolymerization of styrene (St) and methyl methacrylate (MMA) was achieved by heating a solution of St/MMA/organostibine mediator at 100 °C or St/MMA/organostibine mediator/AIBN with various monomer feed ratios at 60 °C. The addition of AIBN significantly decreased the reaction temperature and enhanced the rate of copolymerization. The structure of poly(St-co-MMA) was verified by ¹H NMR. The reactivity ratios at 60 °C were determined by the extended Kelen-Tüd?s method to be γ_St = 0.40 and γ_MMA = 0.44. The ln([M]₀/[M]) increased linearly with increasing reaction time. The number-average molecular weights of poly(St-co-MMA) increased linearly with conversion. Poly(St-co-MMA) with expected number-average molecular weight and low polydispersity index was formed. The living characteristic was further confirmed by chain-extension of poly(St-co-MMA) to form poly(St-co-MMA)-b-PMMA.     

Emulsion copolymerization of styrene and methyl methacrylate. II. Molecular weights

A mathematical model for the time evolution of both number-average molecular weight and weight-average molecular weight is described. The model results in a set of ordinary differential equations and its application is not limited by the maximum number of radicals per particle. The model was used to analyze the effect of the monomer molar ratio in the initial charge on the weight-average molecular weight during the emulsion copolymerization of styrene and methyl methacrylate in a batch reactor.     

Triethylaluminum as a concentration-dependent coinitiator and chain-transfer agent of free-radical polymerization of methyl methacrylate in the presence of benzoquinone

Yields in methyl methacrylate (MMA) polymerization as a function of triethylaluminum (TEA) concentration have been determined at a constant benzoquinone (BQ) concentration. The polymerization is negligible at [TEA]/[BQ] concentration ratios smaller than 1, but reaches a maximum yield and then decreases for larger TEA concentrations. Molecular weight measurements show a similar trend, although the maximum is shifted with respect to that corresponding to polymer yield. The existence of two reaction mechanisms is shown by rate measurements at constant initial concentrations. One is a fast reaction, over in a few minutes, which accounts for most of the yield after 30 min reaction time. The other is a slower photoinitiated reaction of the products of the fast reaction. The mechanism proposed is based on a chain-transfer reaction between the inhibitor radical, formed by the addition of the polymer radical (M·) to BQ and TEA, giving a reactive ethyl radical: The competition between a pair of reactions of TEA and BQ, i.e., a free-radical reaction corresponding to the conjugate addition and a molecular reaction leading to the BQ reduction product, is held responsible for the observed yield maximum, since the molecular reaction prevails at larger TEA concentrations. The observed drop in the molecular weight is the result of a chain-transfer reaction on TEA, i.e., the substitution of an ethyl group by the growing polymer radical.     

Effect of heterocyclic derivatives of ferrocene on free-radical polymerization of methyl methacrylate and styrene

The free-radical bulk homopolymerization of methyl methacrylate and styrene initiated by benzoyl peroxide or AIBN in the presence of heterocyclic derivatives of ferrocene is studied. It is shown that, in the case of the peroxide initiator, ferrocene derivatives form highly efficient initiation systems, which make it possible to polymerize methyl methacrylate at a high rate, to reduce the molecular mass of polymers, and to synthesize polymers with a high content of syndiotactic triads, while in the case of AIBN, such systems are not formed.     

Controlled synthesis of polyacrylonitrile via reversible addition-fragmentation chain-transfer pseudoliving radical polymerization and its thermal behavior

The polymerization of acrylonitrile mediated by various trithiocarbonates as reversible addition-fragmentation chain-transfer agents is studied. It is shown that, when polymerization is performed in DMSO, a narrowly dispersed PAN with a controlled molecular mass can be prepared. The pseudoliving radical polymerization of acrylonitrile is conducted for the first time via the reversible addition-fragmentation chaintransfer mechanism in carbon dioxide at an increased pressure. The structure of the polymers is investigated via NMR and IR spectroscopy. As shown by DSC and IR pyrolysis, the thermal behavior of PAN is determined by its molecular mass, the width of the molecular-mass distribution, and the conditions of synthesis. The incorporation of functional groups of the reversible addition-fragmentation chain-transfer agent into a macromolecule changes the structure of the polyconjugated system and makes it possible to control the conditions of its formation.