Nanostructured one-and three-dimensional magnetophotonic crystals based on porous silicon and artificial opals

Nanostructured one-and three-dimensional magnetophotonic crystals are produced by infiltration of yttrium-iron garnet with bismuth into photonic crystals based on porous silicon and artificial opals. The magnetic properties of the resulting structures are studied by generation of the magnetically induced second harmonics. The magnetic contrast of the second harmonics intensity in the spectral region of the photonic gap edge of the photonic crystal is 10–15%.     

Thermal emission properties of 2D and 3D silicon photonic crystals

We present measurements of the thermal emission properties of 2D and 3D silicon photonic crystals with and without substrate heated resistively as well as passively with an aluminium hotplate. The out-of-plane and in-plane emission properties were recorded and compared to numerical simulation. It turned out that for the in-plane 2D photonic crystal and out-of-plane 3D photonic crystal emission a photonic stop gap effect is visible. For the out-of-plane 2D photonic crystal emission, no photonic bandgap effect is observable but instead strong silicon oxide emission from native oxide inside the pores of silicon are observable. A model for the modified thermal emission is presented.     

Si-based two-dimensional photonic crystals coupled to one-dimensional Bragg mirrors

Planar two-dimensional photonic crystals can be combined with a one-dimensional Bragg mirror to control the quality factor and out-of-plane coupling of optical Bloch modes. We have investigated the optical properties of such structures fabricated on silicon. The photonic crystals are fabricated in the upper Si layer deposited on top of quarter-wave thick SiO₂-polycrystalline Si layers. The optical properties are probed by the room-temperature photoluminescence of Ge/Si self-assembled islands as an internal source. We show that an enhancement of the quality factor can be obtained by controlling the thickness of the silicon upper layer in which the two-dimensional photonic crystal is etched and by controlling the air filling factor of the photonic crystal. Quality factors of 2200 around 1100 nm are obtained by this method for defect-free photonic crystals with a square lattice pattern. The experimental results are supported by three-dimensional finite-difference time-domain (FDTD) calculations of the radiated modes for the investigated structures.     

带多孔硅表面缺陷腔的半无限光子晶体Tamm态及其折射率传感机理

结合表面缺陷半无限光子晶体Tamm态与多孔硅光学传感机理,在光子晶体表面缺陷腔中引入多孔硅,并利用其高效的承载机制,提出基于多孔硅表面缺陷光子晶体Tamm态的折射率传感结构.在半无限光子晶体中缺陷腔与原来的周期性分层介质结构的界面上存在Tamm态,通过入射角度调制使其在缺陷腔中实现多次全反射,并在缺陷腔中加入吸收介质,使谐振波长在缺陷腔中完成衰荡,从而在反射谱中得到缺陷峰;调整光子晶体参数,使缺陷峰的半高全宽得到优化,提高其品质因数(Q值);在此基础上,根据Goos-H?nchen相位移与谐振波长的关系,建立由待测样本折射率改变所导致的多孔硅表面吸附层有效折射率变化与缺陷峰值波长漂移之间的关系模型,并分析其折射率传感特性.结果表明,此生物传感结构Q值为1429,灵敏度为546.67 nm/RIU,证明了该传感结构的有效性,可为高Q值和高灵敏度折射率传感器的设计提供一定的理论参考.     

Silicon and porous silicon mid-infrared photonic crystals

A 3D silicon micromachining method based on proton beam writing combined with electrochemical anodization of p-type silicon enables fabrication of mid-infrared photonic crystals made of silicon and porous silicon. Here, example structures of silicon 1D and 2D photonic crystals are demonstrated. Progress and problems of fabricating 3D photonic crystals made of silicon are discussed. The strategy of fabricating photonic crystals purely made of porous silicon, and the characterization method of all these mid-infrared structures, are discussed. Due to the flexibility of this fabrication method, photonic devices and integrated photonic circuits may be built on a single chip, for which two 2D silicon photonic crystals with one on top of the other are demonstrated.     

Electronic-Excitation Energy Transfer between Dye Molecules Adsorbed in One-Dimensional Photonic Crystals

Electronic-excitation energy transfer between molecules of Coumarin 7 (donor) and Rhodamine B (acceptor) have been experimentally investigated in one-dimensional photonic crystals based on oxidized mesoporous silicon and in a similar matrix, which does not possess the properties of a photonic crystal. The efficiencies of excitation transfer between donor and acceptor molecules have been determined based on the donor-fluorescence quenching and sensitized acceptor luminescence. It is established that the efficiency of electronic-excitation energy transfer in a photonic crystal increases in comparison with that for porous silicon.     

Simulation of surface-modified porous silicon photonic crystals for biosensing applications

In this work realistic biosensing structures based on the integration of porous silicon photonic crystals with polymer coating technology are presented. Microcavities and rugate filters are chosen as the photonic crystal configuration. The deposition of a polymer layer on the pore walls of these structures is proposed to improve the selectivity and sensitivity of the sensing function. A complete effective refractive index model including the polymer layer, the target and external effects like silicon oxidation has been developed in order to accurately simulate the structures. It is expected that the proposed structures could be used as low cost, highly integrated and highly sensitive biological sensors.     

Effect of photonic crystal structure on the nonlinear optical anisotropy of birefringent porous silicon

Anisotropic photonic crystal structures consisting of birefringent porous silicon layers with alternating porosity were fabricated. The in-plane birefringence formed as a result of anisotropic etching in Si(110) results in unique multilayered structures with two distinct photonic bandgaps for orthogonal light polarizations. Nonlinear optical studies based on the third-harmonic generation from these structures demonstrate variation in the symmetry of the nonlinear optical response.     

Preparation of one-dimensional porous silicon photonic quantum-well structures

One-dimensional porous silicon (PSi) photonic quantum-well structures have been electrochemically fabricated and spectroscopically characterized. The photonic well in the structure is a photonic crystal (PC) consisting of alternately stacked high- and low-refractive-index PSi layers. Discrete states are observed in both reflectance and transmission spectra. It is found that the number of confined states appearing in the photonic bandgap of the photonic barrier depends on the number of periods adopted in the well PC. Thus, increased confined photonic states can be created simply by increasing the number of periods of the well PC in the structures. Received: 26 February 2002 / Accepted: 17 May 2002 / Published online: 4 December 2002 RID="*" ID="*"Corresponding author. Fax: +86-21/6510-4949, E-mail: xyhou@fudan.edu.cn     

Optical properties of one-dimensional photonic crystals obtained by micromatchining silicon (a review)

The theoretical and experimental investigations of photonic band gaps in one-dimensional photonic crystals created by micromatchining silicon, which have been performed by the author as part of his doctoral dissertation, are presented. The most important result of the work is the development of a method of modeling photonic crystals based on photonic band gap maps plotted in structure–property coordinates, which can be used with any optical materials and in any region of electromagnetic radiation, and also for nonperiodic structures. This method made it possible to realize the targeted control of the optical contrast of photonic crystals and to predict the optical properties of optical heterostructures and three-component and composite photonic crystals. The theoretical findings were experimentally implemented using methods of micromatchining silicon, which can be incorporated into modern technological lines for the production of microchips. In the IR spectra of a designed and a fabricated optical heterostructure (a composite photonic crystal), extended bands with high reflectivities were obtained. In a Si-based three-component photonic crystal, broad transmission bands and photonic band gaps in the middle IR region have been predicted and experimentally demonstrated for the first time. Si–liquid crystal periodic structures with electric-field tunable photonic band-gap edges have been investigated. The one-dimensional photonic crystals developed based on micromatchining silicon can serve as a basis for creating components of optical processors, as well as highly sensitive chemical and biological sensors in a wide region of the IR spectrum (from 1 to 20 μm) for lab-on-a-chip applications.     

Magneto-optical defects in two-dimensional photonic crystals

We analyze the properties of magneto-optical defect states in two-dimensional photonic crystals. With out-of-plane magnetization, the magneto-optical coupling splits doubly-degenerate TE states into two counter-rotating modes at different frequencies. The strength of magneto-optical coupling strongly depends on the spatial overlap of the cavity domain structures and the cross product of the modal fields. The transport property of the resultant nonreciprocal states is demonstrated in a junction circulator structure with a magneto-optical cavity coupled to three waveguides. By a proper matching of the magneto-optical frequency splitting with the cavity decay rate into the waveguide, ideal three-port circulator characteristics with complete isolation and transmission can be achieved, with an operational bandwidth proportional to the magneto-optical constant. The proposed optical circulator in a bismuth-iron-garnet/air photonic crystal is demonstrated with finite-difference time-domain calculations and is compared to an alternative implementation of silicon/air crystal infiltrated with a single bismuth-iron-garnet domain.     

基于微结构参数建模的多孔硅绝热层热导率研究

多孔硅由于具有较低的热导率,因而可以将其作为半导体器件中的绝热层.与其他从边界散射等复杂微观热传导机制出发建模研究多孔硅的热导率不同,将多孔硅热导率影响机制更表观地归结到孔洞的存在和分布等结构因素上,把整个多孔硅视为由硅连续材料介质和孔洞连续介质通过串联和并联组合成的复合微结构,给予其低热导率一个更为易于理解和简化的解释.进一步把孔隙率对等效热导率的影响分解为两个不同的部分,即纵向部分和横向部分,半定量地给出不同的孔洞结构和分布下孔隙率与等效热导率的关系.与实验数据进行对比后验证了模型的有效性.继而从结构的角度说明了多孔硅热导率较低的原因.     

Analysis of tunable bandgaps in liquid crystal-infiltrated 2D silicon photonic crystals

We present a theoretical study on two-dimensional photonic crystals composed of silicon and the E7 liquid crystal. We analyze how the optical axis orientation of the liquid crystal influences the photonic bands and bandgaps, for the case when the Maxwell equations can be decoupled into the TE and TM modes. We consider two different structures, a triangular lattice of E7 liquid crystal cylinders in a silicon background and a triangular lattice of silicon cylinders in an E7 liquid crystal background. The effect of the liquid crystal anisotropy on the geometry of the irreducible Brillouin zone allows us to propose a simplified way to calculate the photonic bandgaps. Results show that the bandgap width and center frequency have a 60° periodicity for both structures. Using the plane-wave expansion method, we determined the maximum bandgap and the optimal radius of the cylinders for each structure. Finally, for the second structure, we propose an optical switch with a 50% duty cycle. These structures can be applied to design tunable photonic devices.     

Microfabrication of freestanding porous silicon particles containing spectral barcodes

A method to microfabricate micron‐scale freestanding porous silicon photonic crystal particles is described. An electrochemically prepared film of porous silicon on a crystalline silicon substrate is patterned with an SU8‐25 photoresist, and the unmasked porous silicon is removed with a chlorine plasma reactive ion etch. Porous microparticles are then removed from the substrate by electropolishing. Scanning electron microscopy and microscopic reflection spectroscopy are used to characterize the geometry and optical properties of the freestanding particles. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

近红外波段硅基金属光子晶体平板的亚波长成像特性

利用时域有限差分方法,理论上研究了由正方形金属嵌入背景材料硅中组成的二维正方晶格和三角晶格光子晶体的亚波长成像特性。采用Drude模型描述金属银的色散特性,在近红外波段该模型可以很好地描述金属的实际介电常数。通过结构参数的设计,在上述两种结构中实现了波长在1550nm附近的亚波长成像,并且发现金属对入射光的吸收使得成像位置处的光强稍有降低,但是对于光子晶体亚波长成像的质量并无影响。相对于通常的硅基空气孔型光子晶体亚波长成像器件,该种硅基金属型全固态光子晶体结构更加稳定,因而可以更好地在复杂全光集成回路中加以实际应用。     

Surface wave photonic device based on porous silicon multilayers

Porous silicon is widely studied in the field of photonics due to its interesting optical properties. In this work, we present theoretical and first experimental studies of a new kind of porous silicon photonic device based on optical surface wave. A theoretical analysis of the device is presented using plane-wave approximation. The porous silicon multilayered structures are realized using electrochemical etching of p⁺-type silicon. Morphological and optical characterizations of the realized structures are reported.     

Thermal emission of macroporous silicon chirped photonic crystals

In this Letter we report on the thermal properties of macroporous silicon photonic crystals with the unit cell gradually varied along the pore axis. We show experimentally that arbitrarily large omnidirectional total-reflectance bands can be produced with such structures. We also demonstrate that those bands can be effectively used to reduce thermal radiation in large spectral bands.     

Modeling of the optical properties of porous silicon photonic crystals in the visible spectral range

Optical devices based on photonic crystals are of great interest because they can be efficiently used in laser physics and biosensing. Photonic crystals allow one to control the propagation of electromagnetic waves and to change the emission characteristics of luminophores embedded into photonic structures. One of the most interesting materials for developing one-dimensional photonic crystals is porous silicon. However, an important problem in application of this material is the control of the refractive index of layers by changing their porosity, as well as the refractive index dispersion. In addition, it is important to have the possibility of modeling the optical properties of structures to choose precisely select the fabrication parameters and produce one-dimensional photonic crystals with prescribed properties. In order to solve these problems, we used a mathematical model based on the transfer matrix method, using the Bruggeman model, and on the dispersion of silicon refractive index. We fabricated microcavities by electrochemical etching of silicon, with parameters determined by the proposed model, and measured their reflection spectra. The calculated results showed good agreement with experimental data. The model proposed allowed us to achieve a microcavity Q-factor of 160 in the visible region.     

Beam focusing upon the reflection from crystals and multilayer periodic structures with variable period

The experimental spectral dependence of the intensity of the second harmonic (SH) generated in microcavities based on porous silicon photonic crystal demonstrates resonant intensity enhancement (by a factor of ～2×10²) in the vicinity of the cavity mode and at the edges of the photonic band gap. The enhancement is due to the combined effect of pump radiation localization inside the microcavity, multiple SH interference in the photonic crystal, and two-photon resonance of the porous silicon quadratic susceptibility at the SH frequency.     

Approximate optical cloaking in an axisymmetric silicon photonic crystal structure.

Axisymmetric photonic crystal structures may be designed to possess interesting optical properties, particularly when the photonic band structure of the material is highly anisotropic. We use finite element calculations to demonstrate an approximate electromagnetic cloaking effect imparted by a structure consisting of concentric silicon photonic crystal layers. The results show that it is possible to bend light around an object by simply using anisotropy. The calculations show that the cloaking mechanism is fundamentally different from Pendry's approach. This design may work as a practical solution for optical cloaking.