Electrochemical biosensors for detection of point mutation based on surface ligation reaction and oligonucleotides modified gold nanoparticles

An electrochemical method for point mutation detection based on surface ligation reaction and oligonucleotides (ODNs) modified gold nanoparticles (AuNPs) was demonstrated. Point mutation identification was achieved using Escherichia coli DNA ligase. This system for point mutation detection relied on a sandwich assay comprising capture ODN immobilized on Au electrodes, target ODN and ligation ODN. Because of the sequence-specific surface reactions of E. coli DNA ligase, the ligation ODN covalently linked to the capture ODN only in the presence of a perfectly complementary target ODN. The presence of ligation products on Au electrode was detected using chronocoulometry through hybridization with reporter ODN modified AuNPs. The use of AuNPs improved the sensitivity of chronocoulometry in this approach, a detection limit of 0.9 pM complementary ODN was obtained. For single base mismatched ODN (smODN), a negligible signal was observed. Even if the concentration ratio of complementary ODN to smODN was decreased to 1:1000, a detectable signal was observed. This work may provide a specific, sensitive and cost-efficient approach for point mutant detection.     

Ultra-sensitive electrochemical DNA biosensor based on signal amplification using gold nanoparticles modified with molybdenum disulfide,graphene and horseradish peroxidase

We have developed an ultra-sensitive electrochemical DNA biosensor by assembling probe ssDNA on a glassy carbon electrode modified with a composite made from molybdenum disulfide, graphene, chitosan and gold nanoparticles. A thiol-tagged DNA strand coupled to horseradish peroxidase conjugated to AuNP served as a tracer. The nanocomposite on the surface acts as relatively good electrical conductor for accelerating the electron transfer, while the enzyme tagged gold nanoparticles provide signal amplification. Hybridization with the target DNA was studied by measuring the electrochemical signal response of horseradish peroxidase using differential pulse voltammetry. The calibration plot is linear in the 5.0?×?10^?14 and 5.0?×?10^?9 M concentration range, and the limit of detection is 2.2?×?10^?15 M. The biosensor displays high selectivity and can differentiate between single-base mismatched and three-base mismatched sequences of DNA. The approach is deemed to provide a sensitive and reliable tool for highly specific detection of DNA.

阳离子荧光共轭聚合物结合纳米颗粒用于DNA检测

利用纳米颗粒对目标DNA的富集、分离作用以及阳离子荧光共轭聚合物良好的荧光特性,建立了一种特异性检测DNA的新方法.首先将标记有猝灭基团的DNA捕获探针修饰到纳米颗粒上,捕获互补的DNA分子;然后加入S1核酸酶,除去未捕获到互补DNA的捕获探针;最后用Dnase Ⅰ将颗粒上的双链切断,使猝灭基团从纳米颗粒上解离下来,与阳离子荧光共轭聚合物结合并猝灭其荧光.结果表明,目标核酸的浓度与该聚合物的荧光猝灭程度正相关,且具有良好的特异性,线性响应范围为5.0～40 nmol/L; 检出限为3.7 nmol/L(S/N=3).     

Electrochemical Detection of DNA Hybridization Based on the Probe Labeled with Carbon‐Nanotubes Loaded with Silver Nanoparticles

A sensitive electrochemical method for the detection of DNA hybridization based on the probe labeled with multiwall carbon‐nanotubes (MWNTs) loaded with silver nanoparticles (Ag‐MWNTs) has been developed. MWNTs were electroless‐plated with a large number of silver nanoparticles to form Ag‐MWNTs. Probe single strand DNA (ss‐DNA) with a thiol group at the 3′‐terminal labeled with Ag‐MWNTs by self‐assembled monolayer (SAM) technique was employed as an electrochemical probe. Target ss‐DNA with a thiol group was immobilized on a gold electrode by SAM technique and then hybridized with the electrochemical probe. Binding events were monitored by differential pulse voltammetric (DPV) signal of silver nanoparticles. The signal difference permitted to distinguish the match of two perfectly complementary DNA strands from the near perfect match where just three base pairs were mismatched. There was a linear relation between the peak current at +120 mV (vs. SCE) and complementary target ss‐DNA concentration over the range from 3.1×10^?14 to 1.0×10^?11 mol/L with a detection limit of 10 fmol/L of complementary target ss‐DNA. The proposed method has been successfully applied to detection of the DNA sequence related to cystic fibrosis. This work demonstrated that the MWNTs loaded with silver nanoparticles offers a great promising approach for sensitive detection of DNA hybridization.     

Electrochemical Determination of the p53 Tumor Suppressor Gene Using a Gold Nanoparticle-Graphene Nanocomposite Modified Glassy Carbon Electrode

A novel sensitive and simple electrochemical DNA sensor is reported for the determination of p53 tumor suppressor gene. A gold nanoparticle/graphene nanocomposite-modified glassy carbon electrode was prepared and methylene blue was used as the hybridization redox indicator. Scanning electron microscopic and electrochemical characterization demonstrated that the gold nanoparticles and graphene were present on the electrode. The resulting sensor provided suitable electrochemical response to the p53 tumor suppressor gene with a linear dynamic range from 0.1 to 1000?nM. The limit of detection was 0.012?nM. The sensor was able to differentiate a complete complementary DNA sequence, single-base mismatched DNA sequence, and a three-base mismatched DNA sequence. The precision of the device was satisfactory, with a relative standard deviation of 4.1% for 11 measurements. The combination of gold nanoparticles and a graphene nanocomposite provided enhanced capabilities for the determination of DNA for clinical applications.     

Electrochemical DNA Hybridization Detection Using DNA Cleavage

We report the new method for detection of DNA hybridization using enzymatic cleavage. The strategy is based on that S1 nuclease is able to specifically cleave only single strand DNA, but not double strand DNA. The capture probe DNA, thiolated single strand DNA labeled with electroactive ferrocene group, was immobilized on a gold electrode. After hybridization of target DNA of complementary and noncomplementary sequences, nonhybridized single strand DNA was cleaved using S1 nuclease. The difference of enzymatic cleavage on the modified gold electrode was characterized by cyclic voltammetry and differential pulse voltammetry. We successfully applied this method to the sequence‐selective discrimination between perfectly matched and mismatched target DNA including a single‐base mismatched target DNA. Our method does not require either hybridization indicators or other exogenous signaling molecules which most of the electrochemical hybridization detection systems require.     

Self-quenching smart probes as a platform for the detection of sequence-specific UV-induced DNA photodamage

Molecular beacons (MBs) are sensitive probes for many DNA sequence-specific applications, such as DNA damage detection, but suffer from technical and cost limitations. We have designed smart probes with self-quenching properties as an alternative to molecular beacons to monitor sequence-specific UV-induced photodamage of oligonucleotides. These probes have similar stem-loop structural characteristics as molecular beacons, but quenching is achieved instead via photoinduced intramolecular electron transfer by neighboring guanosine residues. Our results indicate that the probes are sensitive enough to detect nanomolar target concentrations and are specific enough to discriminate single-base damage. When the probes were used to monitor UV-induced photodamage in oligonucleotide sequences that differ by a single-base mismatch, the photodamage time constant was higher for the perfectly complementary target sequences than for the mismatch sequences, indicating that these probes are specific for each target sequence. In addition, time constants obtained for oligonucleotide target sequences with both stem and loop base mismatches are lower than those with only loop mismatches, suggesting that these sequences are also specifically distinguished by the smart probes. These probes thus constitute robust, sensitive, specific, and cheaper alternatives to MBs for sequence-specific DNA damage detection.     

Characterization of DNA immobilization and subsequent hybridization using in situ quartz crystal microbalance, fluorescence spectroscopy, and surface plasmon resonance

We have characterized the immobilization of thiol-modified oligomers on Au surfaces and subsequent hybridization with a perfectly matched or single-base mismatched target using a quartz crystal microbalance (QCM) and fluorescence spectroscopy. The surface density of immobilized probe molecules and the hybridization efficiency depending on the type of buffer and salt concentration were investigated. We observed some ambiguities in surface coverage deduced from QCM measurement and adopted a complementary fluorescence displacement method. Direct comparison of surface coverage deduced from frequency change in QCM measurement and determined by the fluorescence exchange reaction revealed that QCM results are highly overestimated and the amount of overestimation strongly depends on the type of buffer and the structure of the film. Discrimination capability of the surface attached 15-mer probe was also examined using a single-base mismatched target at various hybridization temperatures. Hybridization efficiency depending on the type of single base mismatch was investigated using surface plasmon resonance (SPR).     

Quantum dot-based electrochemical DNA biosensor using a screen-printed graphite surface with embedded bismuth precursor

This work reports the development of screen-printed quantum dots (QDs)-based DNA biosensors utilizing graphite electrodes with embedded bismuth citrate as a bismuth precursor. The sensor surface serves both as a support for the immobilization of the oligonucleotide and as an ultrasensitive voltammetric QDs transducer relying on bismuth nanoparticles. The utility of this biosensor is demonstrated for the detection of the C634R mutation through hybridization of the biotin-tagged target oligonucleotide with a surface-confined capture complementary probe and subsequent reaction with streptavidin-conjugated PbS QDs. The electrochemical transduction step involved anodic stripping voltammetric determination of the Pb(II) released after acidic dissolution of the QDs. Simultaneously with the electrolytic accumulation of Pb on the sensor surface, the embedded bismuth citrate was converted in situ to bismuth nanoparticles enabling ultra-trace Pb determination. The biosensor showed a linear relationship of the Pb(II) peak current with respect to the logarithm of the target DNA concentrations from 0.1 pmol L^− 1 to 10 nmol L^− 1, and the limit of detection was 0.03 pmol L^− 1. The biosensor exhibited effective discrimination between a single-base mismatched sequence and the fully complementary target DNA. These “green” biosensors are inexpensive, lend themselves to easy mass production, and hold promise for ultrasensitive bioassay formats.     

Rapid detection of Staphylococcus aureus via a sensitive DNA hybridization assay based on a long-lifetime luminescent europium marker

A two-probe tandem nucleic acid hybridization assay for detection of Staphylococcus aureus is presented. It is based on a europium(III) complex as a marker that has a long fluorescence lifetime, high quantum yield and can be easily conjugated to an oligonucleotide signaling probe. The amino-modified capture probe was associated with the signaling probe to form a two-probe tandem DNA pattern that is complementary to the target DNA. The method was optimized in terms of hybridization temperature, hybridization time and washing time. This resulted in good specificity and sensitivity when detecting such bacteria in food samples.

Ultrasensitive electrochemical supersandwich DNA biosensor using a glassy carbon electrode modified with gold particle-decorated sheets of graphene oxide

We describe a supersandwich type of electrochemical DNA biosensor based on the use of a glassy carbon electrode (GCE) modified with reduced graphene oxide (rGO) sheets that are decorated with gold nanoparticles (Au NPs). Thiolated capture DNA (probe DNA) was covalently linked to the Au NPs on the surface of the modified GCE via formation of Au-S bonds. In presence of target DNA, its 3′ terminus hybridizes with capture probe and the 5′ terminus hybridizes with signal probe labeled with Methylene Blue (MB). On increasing the concentration of target DNA, hybridization between signal probe and target DNA results in the formation of three different DNA sequences that form a supersandwich structure. The signal intensity of MB improves distinctly with increasing concentrations of target DNA in the sample solution. The assembling process on the surface of the electrode was studied by scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS). Differential pulse voltammetry (DPV) was used to monitor the hybridization event by measuring the changes in the peak current for MB. Under optimal conditions, the peak currents in DPV for MB linearly increase with the logarithm of target DNA concentration in the range from 0.1 μM to1.0 fM, with a detection limit of 0.35 fM (at an signal/noise ratio of 3). This biosensor exhibits good selectivity, even over single-base mismatched target DNA.

高灵敏纳米金比色芯片检测乙型肝炎病毒DNA及其变异

构建了新型纳米金比色芯片,利用Taq DNA连接酶的连接特异性,将其与乙型肝炎病毒DNA( HBV-DNA)靶序列完全互补杂交的捕获探针(固定在芯片上)和纳米金修饰的探针连接成一条链,从而将纳米金颗粒固定到芯片点阵上,再通过银染反应放大,形成裸眼可见的显色信息.通过点阵的位置及灰度,即可判断HBV-DNA靶序列的单碱基突变,并得出相对定量信息.本实验对不同浓度的HBV-DNA靶序列进行了检测.结果显示:此技术对单碱基突变有很强的特异性识别能力,并且具有较高的灵敏度(约10 pmol/L),在10～100 pmol/L浓度范围内表现出较好的线性关系.该技术检测时间短(＜1 h)、操作简单、不需要特殊的检测设备,具有很好的临床应用前景.     

Magnetic porous carbon nanocomposites derived from metal-organic frameworks as a sensing platform for DNA fluorescent detection

Metal-organic frameworks (MOFs) have emerged as very fascinating functional materials due to their tunable nature and diverse applications. In this work, we prepared a magnetic porous carbon (MPC) nanocomposite by employing iron-containing MOFs (MIL-88A) as precursors through a one-pot thermolysis method. It was found that the MPC can absorb selectively single-stranded DNA (ssDNA) probe to form MPC/ssDNA complex and subsequently quench the labelled fluorescent dye of the ssDNA probe, which is resulted from the synergetic effect of magnetic nanoparticles and carbon matrix. Upon the addition of complementary target DNA, however, the absorbed ssDNA probe could be released from MPC surface by forming double-stranded DNA with target DNA, and accompanied by the recovery of the fluorescence of ssDNA probe. Based on these findings, a sensing platform with low background signal for DNA fluorescent detection was developed. The proposed sensing platform exhibits high sensitivity with detection limit of 1 nM and excellent selectivity to specific target DNA, even single-base mismatched nucleotide can be distinguished. We envision that the presented study would provide a new perspective on the potential applications of MOF-derived nanocomposites in biomedical fields.     

Bioconjugated nanoparticles for DNA protection from cleavage

We have developed a novel method to protect DNA from cleavage using bioconjugated nanoparticles. Positively charged amino-modified silica nanoparticles have been directly prepared using water-in-oil microemulsion. Plasmid DNA can be easily enriched onto the positively charged nanoparticle surface, and the DNA strands are well protected from enzymatic cleavage. When incubated with nuclease enzyme for enzymatic cleavage, free plasmid DNA strands are completely cleaved, while those on the nanoparticle surfaces are intact. Our results clearly demonstrate unique properties of nanomaterials when combined with biomolecules. Our simple bionanotechnology will be highly useful in DNA separation, manipulation, and detection, and possibly in genetic engineering and gene therapy, as plasmid DNA can be protected in cellular environments without any change in its property.     

Single-mismatch detection using nucleic acid molecular 'light switch'

A novel nucleic acid molecular ‘light switch’ method is developed for the sensitive recognition and detection of a single-base mismatched oligonucleotides. The detection limit of oligonucleotide of perfect double stranded and that with single-base, two-base and three-base mismatched are 0.11, 0.17, 0.34 and 1.5 ng ml⁻¹, respectively. It was found that Ru(phen)₂(dppx)²⁺ (phen=1,10-phenanthroline, dppx=7,8-dimethyl-dipyridophenazine) can be used to detect and recognize the perfect double stranded oligonucleotides from mismatched and random targets by the intensity of fluorescence and temperature. This method can be used to recognize and quantitatively detect target DNA with specific sequence. The advantage of this method is that no requisites are needed to separate the coexisting random targets in the case of a mixed solution containing perfect, mismatched and random targets, which make the recognition analysis of oligonucleotide simple and fast. Moreover, it has potential in the study of dynamic process of DNA hybridization.     

A sensitive fluorescence anisotropy method for point mutation detection by using core-shell fluorescent nanoparticles and high-fidelity DNA ligase

The present study reports a proof-of-principle for a sensitive genotyping assay approach that can detect single nucleotide polymorphisms (SNPs) based on fluorescence anisotropy measurements through a core-shell fluorescent nanoparticles assembly and ligase reaction. By incorporating the core-shell fluorescent nanoparticles into fluorescence anisotropy measurements, this assay provided a convenient and sensitive detection assay that enabled straightforward single-base discrimination without the need of complicated operational steps. The assay was implemented via two steps: first, the hybridization reaction that allowed two nanoparticle-tagged probes to hybridize with the target DNA strand and the ligase reaction that generated the ligation between perfectly matched probes while no ligation occurred between mismatched ones were implemented synchronously in the same solution. Then, a thermal treatment at a relatively high temperature discriminated the ligation of probes. When the reaction mixture was heated to denature the duplex formed, the fluorescence anisotropy value of the perfect-match solution does not revert to the initial value, while that of the mismatch again comes back as the assembled fluorescent nanoparticles dispart. The present approach has been demonstrated with the discrimination of a single base mutation in codon 12 of a K-ras oncogene that is of significant value for colorectal cancers diagnosis, and the wild type and mutant type were successfully scored. Due to its ease of operation and high sensitivity, it was expected that the proposed detection approach might hold great promise in practical clinical diagnosis.     

A one-step highly sensitive method for DNA detection using dynamic light scattering

A one-step homogeneous DNA detection method with high sensitivity was developed using gold nanoparticles (AuNPs) coupled with dynamic light scattering (DLS) measurement. Citrate-protected AuNPs with a diameter of 30 nm were first functionalized with two sets of single-stranded DNA probes and then used as optical probes for DNA detection. In the presence of target DNA, the hybridization between target DNA and the two nanoparticle probes caused the formation of nanoparticle dimers, trimers, and oligomers. As a result, the nanoparticle aggregation increased the average diameter of the whole nanoparticle population, which can be monitored simply by DLS measurement. A quantitative correlation can be established between the average diameter of the nanoparticles and the target DNA concentration. This DLS-based assay is extremely easy to conduct and requires no additional separation and amplification steps. The detection limit is around 1 pM, which is 4 orders of magnitude better than that of light-absorption-based methods. Single base pair mismatched DNAs can be readily discriminated from perfectly matched target DNAs using this assay.     

RNA-templated single-base mutation detection based on T4 DNA ligase and reverse molecular beacon

A novel RNA-templated single-base mutation detection method based on T4 DNA ligase and reverse molecular beacon (rMB) has been developed and successfully applied to identification of single-base mutation in codon 273 of the p53 gene. The discrimination was carried out using allele-specific primers, which flanked the variable position in the target RNA and was ligated using T4 DNA ligase only when the primers perfectly matched the RNA template. The allele-specific primers also carried complementary stem structures with end-labels (fluorophore TAMRA, quencher DABCYL), which formed a molecular beacon after RNase H digestion. One-base mismatch can be discriminated by analyzing the change of fluorescence intensity before and after RNase H digestion. This method has several advantages for practical applications, such as direct discrimination of single-base mismatch of the RNA extracted from cell; no requirement of PCR amplification; performance of homogeneous detection; and easily design of detection probes.     

Recognition of single-base mismatch DNA by Au nanoparticle-assisted electroelution

A simple, convenient and effective method based on the surface plasmon resonance (SPR) technique was introduced for recognition of single-base mismatch DNA (smDNA) by Au nanoparticle (AuNPs)-assisted electroelution. In this method, target DNA, including perfectly matched DNA and smDNA, hybridized with the DNA probes immobilized on Au film and AuNPs, then the Au film was negatively charged. Owing to the difference in stability between single-base mismatch and perfect match DNA, effective distinction between complementary DNA (cDNA) and smDNA was achieved in the presence of an electric field: double-stranded DNA (dsDNA) formed between smDNA targets and DNA probes was denatured by the repulsion force acting on the negatively-charged DNA-linked AuNPs, while the perfectly matched duplex was not influenced. However, if the AuNPs were absent, the effects of cDNA and smDNA were not distinguishable. The effects of electric field intensity and mismatch sites were also investigated. All of the operations were performed under mild conditions. The results showed that AuNP-assisted electroelution may be exploited for the construction of biosensors with high selectivity.     

Lable‐Free Electrochemical DNA Sensor Based on Gold Nanoparticles/Poly(neutral red) Modified Electrode

We present a new strategy for the label‐free electrochemical detection of DNA hybridization based on gold nanoparticles (AuNPs)/poly(neutral red) (PNR) modified electrode. Probe oligonucledotides with thiol groups at the 5‐end were covalently linked onto the surface of AuNPs/PNR modified electrode via S‐Au binding. The hybridization event was monitored by using differential pulse voltammetry (DPV) upon hybridization generates electrochemical changes at the PNR‐solution interface. A significant decrease in the peak current was observed upon hybridization of probe with complementary target ssDNA, whereas no obvious change was observed with noncomplementary target ssDNA. And the DNA sensor also showed a high selectivity for detecting one‐mismatched and three‐mismatched target ssDNA and a high sensitivity for detecting complementary target ssDNA, the detection limit is 4.2×10^?12 M for complementary target ssDNA. In addition, the DNA biosensor showed an excellent reproducibility and stability under the DNA‐hybridization conditions.