特丁二甲硅烷基衍生化气相色谱-质谱法检测尿中4种苯氧羧酸类除草剂

建立了尿中2,4-滴(2,4-D)、2,4-滴丙酸(2,4-DP)2、甲4氯(MCPA)和2甲4氯丙酸(MCPP)4种苯氧羧酸类除草剂的气相色谱-质谱(GC-MS)分析方法。尿样加氯化钠饱和,酸化后用乙醚萃取,萃取物进行特丁二甲硅烷基(TBDMS)衍生化后分析。尿中4种除草剂的浓度在3~3 000 ng/mL范围内工作曲线的线性关系良好,检出限在1 ng/mL以下,3、100和1 000 ng/mL水平加标回收率在97.0%~102.2%之间,精密度在6.2%~14.2%之间。该法灵敏,可用于中毒者和职业接触者尿中苯氧羧酸类除草剂的分析。     

Determination of acidic drugs in sewage water by gas chromatography-mass spectrometry as tert.-butyldimethylsilyl derivatives

A procedure is described for the determination of five acidic non-steroidal anti-inflammatory pharmaceuticals (ibuprofen, naproxen, ketoprofen, tolfenamic acid and diclofenac) in sewage water. The analytical method involves the concentration of water samples using a solid-phase extraction polymeric sorbent, functionalized with N-vinylpyrrolidone. Analytes were eluted with ethyl acetate. derivatized using N-methyl-N-(tert.-butyldimethylsilyl)trifluoroacetamide (MTBSTFA) and analyzed by GC-MS. Influence of time, temperature and volume of MTBSTFA in the yield of the derivatization step were studied in detail using a factorial central composite design. Quantification limits of the analytical procedure for 500 ml of sewage water ranged from 20 to 50 ng/l. Recoveries from 90 to 115% were found for sewage water samples spiked with the studied compounds at the low ng/ml level. Results obtained for real samples show the presence of ibuprofen and naproxen in both influent and effluent of a sewage water treatment plant.     

Isatin (indole-2,3-dione) in urine and tissues. Detection and determination by gas chromatography-mass spectrometry

A simple procedure based upon capillary column gas chromatography-mass spectrometry (GC-MS) is described for the detection and determination of isatin (indole-2,3-dione) in body fluids and tissues. After addition of 5-methylisatin as internal standard to urine or tissue homogenates, organic extracts are dried and derivatized successively with hydroxylamine hydrochloride and the reagent N-tert.-butyldimethylsilyl-N-methyltrifluoroacetamide (MTBSTFA). The tert.-butyldimethylsilyl derivatives obtained show good GC-MS properties and allow quantification by selected-ion monitoring of m/z 333 (isatin) and m/z 347 (internal standard). Adult and newborn human urine output values lie in the ranges 0.4-3.2 mg/mmol of creatinine (5-30 mg per 24 h) and 0.002-0.518 mg/mmol of creatinine, respectively. There is a discontinuous regional distribution in rat tissues. The GC-MS properties of a number of derivatives formed by successive reaction of isatin with hydroxylamine hydrochloride (or methoxyaminehydrochloride or ethoxyamine hydrochloride) and MTBSTFA, bis(trimethylsiyl)trifluoroacetamide, pentafluoropropionic anhydride or pentafluorobenzyl bromide are also described.     

Total syntheses of (+/-)-crinine, (+/-)-crinamine, and (+/-)-6a-epi-crinamine via the regioselective synthesis and Diels-Alder reaction of 3-aryl-5-bromo-2-pyrone

We have devised a new unified synthetic protocol to (+/-)-crinine, (+/-)-crinamine, and (+/-)-6a- epi-crinamine from the Diels-Alder cycloadduct of 3-(3,4-methylenedioxyphenyl)-5-bromo-2-pyrone with TBS vinyl ether. The requisite 3-(3,4-methylenedioxyphenyl)-5-bromo-2-pyrone was prepared from the C3-selective Stille coupling reaction of 3,5-dibromo-2-pyrone. Also noted is that the vinyl bromide can be used as a handle for further derivatization.     

Analysis ofAllium sulfur amino acids by HPLC after derivatization

Summary Two pre-column derivatization procedures coupled with reversed phase HPLC have been compared for the analysis ofS-Alk(en)yl0L-cysteine sulfoxides in variousAllium species. In order to establish external standards some (+/-) sulfoxides were synthesized, using a new method to enhance asymmetric synthesis of the diastereoisomers. The first derivatization method is the formation ofo-phthaldialdehyde/tert.-butylthiol derivatives which can be analyzed using UV detection. The second, presently used for amino acid analysis, is the Waters Pico-Tag method, which employs phenylisothiocyanate as derivatization reagent. As the Pico-Tag method was found to be the most efficient for determination ofS-alk(en)yl-L-cysteine sulfoxides it was used to determine the alliin content of various samples of garlic.     

液-液萃取衍生气相色谱法测定饮用水中卤乙酸

建立了测定饮用水中5种卤乙酸的检测方法。水样经硫酸酸化、叔丁基甲醚萃取、硫酸-甲醇衍生化后,用气相色谱电子捕获检测器测定。5种卤乙酸平均加标回收率为74.5%~104.0%,相对标准偏差为3.1%~11.0%(n=6),最低检出限为0.3~15.3μg/L。该法适用于饮用水中卤乙酸的测定。     

Optimization of solid-phase microextraction conditions for the determination of triclosan and possible related compounds in water samples

A solid-phase microextraction (SPME) method for the determination of triclosan, methyl triclosan, 2,4-dichlorophenol and 2,3,4-trichlorophenol (considered as possible triclosan metabolites) in water samples was optimised. Analytes were first concentrated on a SPME fibre, directly exposed to the sample, and then triclosan and the two chlorinated phenols on-fibre silylated using N-methyl-N-(tert.-butyldimethylsilyl)-trifluoroacetamide (MTBSTFA). Methyl triclosan remained unaffected during the derivatization step. Compounds were determined using gas chromatography in combination with mass spectrometry (GC-MS). Influence of different factors on the efficiency of extraction and derivatization steps was systematically investigated. Using a polyacrylate (PA) fibre quantification limits below 10 ng/l, and acceptable relative standard deviations, were obtained for all compounds after an extraction time of 30 min. On-fibre silylation was carried out in only 10 min. Moreover, the efficiency of the procedure was scarcely affected by the type of water sample. The method was applied to several samples of treated and raw wastewater, triclosan was found in all samples, at concentrations from 120 to 14,000 ng/l, and 2,4-dichlorophenol in most of them, at levels up to 2222 ng/l.     

New hydrolysis method for extremely small amount of lipids and capillary gas chromatographic analysis as n(O)-tert.-butyldimethylsilyl fatty acid derivatives compared with methyl ester derivatives

The organic basic solution, 1 M tetramethylammonium hydroxide (TMAH) in methanol, was employed for the hydrolysis of extremely small amounts of lipids compared to the classical inorganic basic solution, 1 M KOH in ethanol. The hydrolysed fatty acids were derivatized as N(O)-tert.-butyldimethylsilyl (tBDMSi) esters with N-methyl-N-(tert.-butyldimethylsilyl) trifluoroacetamide (MTBSTFA) and compared with the classical derivatives, the methyl esters, made by the BF3-methanol method. Recoveries of fatty acids determined on the standard fatty acids and soybean oil hydrolysed with TMAH were high: about 1.1-2.1- and 2.0-5.4-times, respectively, in all fatty acids compared with the hydrolysis by KOH regardless of derivatization method. The relative standard deviations (RSDs) on the recoveries of standard fatty acids were less than 5% when hydrolysed with TMAH, regardless of derivatives, but when hydrolysed with KOH, RSDs were more than 5% for most fatty acids, especially for long-chain fatty acids. The RSDs on the recoveries of fatty acids on the soybean oil were also very high in the KOH hydrolysis. Fatty acid compositions of soybean oil were similar in the main fatty acids regardless of hydrolysis methods, but showed slightly different values, depending on the methods of derivatization. RSDs were also very high in the KOH hydrolysis. In view of these results, precision of analysis by KOH hydrolysis was very poor, so we could not rely on the data. On the other hand, the reliability of data by TMAH hydrolysis method was very high, so it is a useful new hydrolysis method for extremely small amounts of lipid samples. Both derivatives of 35 standard fatty acids were successfully separated on a HP-1 nonpolar capillary column. tBDMSi derivatives were completely resolved in 70 min by 295 degrees C. In the methyl ester derivatives it took about 80 min to get satisfying resolution, but these derivatives were completely resolved by 250 degrees C. The sensitivity of tBDMSi derivatives was about 1.5-6.3-times higher than that with methyl ester derivatives. The stability of tBDMSi derivatives was constant for about 144 h except arachidic, docosahexanoic, behenic and heneicosanoic acids, which were stable for only 86 h.     

High-performance liquid chromatographic method for the separation of the optical isomers of γ,γ′-di-tert.-butyl- -γ-carboxyglutamic acid and -γ-carboxyglutamic acid

The chemical synthesis of γ,γ′-tert.-butyl-γ-carboxyglutamic acid is accompanied by extensive racemization, and very careful resolution is needed to obtain and -γ,γ′-di-tert.-butyl-γ-carboxyglutamic acids in high chiral purity. A novel method was devised for the separation of enantiomers of γ,γ′-di-tert.-butyl-γ-carboxyglutamic acid and γ-carboxyglutamic acid, applying precolumn derivatization with 1-fluoro-2,4-dinitrophenyl-5- -alanine amide and 2,3,4,6-tetra-O-acetyl-β- -glucopyranosyl isothiocyanate as chiral reagents, with subsequent reversed-phase high-performance liquid chromatographic separation of diastereomeric compounds. The effects of organic modifiers, of the mobile-phase composition and of the pH on the separation of the diastereomers were investigated.     

Determination of clenbuterol in urine as its cyclic boronate derivative by gas chromatography-mass spectrometry

A rapid and reliable gas chromatographic-mass spectrometric method for the determination of clenbuterol in urine is described. Penbutolol was used as internal standard. Four derivatization procedures have been tested, of which 1-butaneboronic acid gave the best results. The method includes extraction of the alkalinized urine (3 ml) with tert.-butyl methyl ether-n-butanol (9:1), derivatization with 1-butaneboronic acid (15 min at room temperature), and analysis in the selected-ion monitoring mode of the derivatives of clenbuterol at m/z 243, 327 and 342 and of penbutolol at m/z 342 and 357. The detection limit is 0.5 ng/ml and the recovery better than 90%.     

Analysis of t-Butyldimethylsilyl Derivatives of Chlorophenols in the Atmosphere of Urban and Rural Areas in East of France

A method using GC-MS and derivatization with N-(t-butyldimethylsilyl)-N-ethyltrifluoroacetamide (MTBSTFA) was developed for the analysis of 19 chlorophenols compounds in atmospheric samples (gas and particles). Air sampling was carried out using a Hi-Vol sampler with glass fibre filter and XAD-2 resin at a flow rate of 60 m³ h⁻¹. The particle and gas phases were collected separately over a period of 4 h. Samples were Soxhlet extracted, evaporated to dryness under nitrogen and refilled with acetonitrile. 100 mL of these extracts were derivatized with 100 μL of MTBSTFA at 80 °C for 1 h under strong stirring. Sylylated chlorophenols were injected into a GC-MS in splitless mode and quantified as their TBDMS derivatives in the SIM mode. Mass spectral analysis of the derivatives of the 19 compounds studied indicates that the spectra are highly specific showing an ion at [M - 57]⁺ which is useful for structure confirmation or analysis at low levels using selected ion monitoring. Quantification limits varied between 5 μg L⁻¹ and 10 μg L⁻¹ which correspond to 20 pg m⁻³ and 40 pg m⁻³ for 250 m³ of air sampled. This method was successfully applied to atmospheric samples collected simultaneously in winter 2004 in an urban (Strasbourg) and rural (Erstein) areas in east of France.     

Separation, identification, and quantification of amino acids in L-lysine fermentation potato juices by gas chromatography-mass spectrometry

The amino acid composition of L-lysine fermentation juices from potatoes and cane molasses from a green biorefinery has been determined by gas chromatography-mass spectrometry. N-Methyl-N-tert(butyldimethylsilyl)tri-fluoroacetamide (MTBSTFA) was used as derivatization reagent to prepare the t-butyldimethylsilyl derivatives of the amino acids present in the juices. The amino acids in these derivatives were identified from both their EI and CI mass spectra and their retention times in the gas chromatogram, and they were quantified employing the GC response signals relative to cycloleucine as internal standard.     

Determination of mefloquine by electron-capture gas chromatography after phosgene derivatization in biological samples and in capillary blood collected on filter paper

Mefloquine is determined in 100-microliter samples of whole blood, plasma and capillary blood collected on filter paper by gas chromatography with electron-capture detection after derivatization with phosgene. Sample preparation for whole blood and plasma involves a protein precipitation step that uses a combination of zinc and acetonitrile, followed by simultaneous extraction with methylene chloride and derivatization with phosgene at pH 9.50. Filter paper spots are immersed for 12-24 h in 0.1 M hydrochloric acid, followed by simultaneous extraction with methyl tert.-butyl ether and derivatization. After evaporation of the organic phase and reconstitution with ethyl acetate, 1 microliter of the extract is injected into a megabore capillary column. Because of the high sensitivity of the method, mefloquine concentrations down to 25 nmol/l (9.5 micrograms/l) are determined in 100-microliters samples with a relative standard deviation of 12% at the 25 nmol/l level. Excellent precision was obtained over the range of concentrations tested, 0.10-3 mumol/l (45-1100 micrograms/l), in both plasma and whole blood and from filter-paper-collected capillary blood. The day-to-day relative standard deviation in plasma at the therapeutic level (1-3 mumol/l) was 4.5% (n = 8).     

Comparison and evaluation of analysis procedures for the quantification of (2-methoxyethoxy)acetic acid in urine

Several extraction and derivatization procedures were evaluated for the quantification of (2-methoxyethoxy)acetic acid (MEAA) in urine. MEAA is a metabolite and a biomarker for exposure to 2-(2-methoxyethoxy)ethanol, a glycol ether with widespread use in various industrial applications and the specific use as an anti-icing additive in the military jet fuel formulation JP-8. Quantification of glycol ether biomarkers is an active area of analytical research. Various sample preparation procedures were evaluated: liquid–liquid extraction (LLE) using ethyl acetate yielded the highest recovery, and solid-phase extraction (SPE) gave low recovery of MEAA. Two derivatization procedures were thoroughly investigated and validated, namely, silylation of MEAA with N-methyl-N-(tert-butyldimethylsilyl)trifluoroacetamide (MTBSTFA), and esterification of MEAA using ethanol. Quantification was performed by gas chromatography (GC) with a mass spectrometer as detector and using a polydimethylsiloxane (HP-1) capillary column. Deuterated 2-butoxyacetic acid (d-BAA) was used as an internal standard. Recovery studies of spiked human urine demonstrated the accuracy and precision of both procedures. The limit of detection (LOD) and other figures of merit for both derivatization procedures will be discussed in detail. Applications of these analysis procedures are also discussed. Disclaimers Mention of company names and/or products does not constitute endorsement by the Centers for Disease Control and Prevention (CDC). The findings and conclusions in this report are those of the authors and do not necessarily represent the views of the National Institute for Occupational Safety and Health.     

Direct chiral separation of abscisic acid by high-performance liquid chromatography with a phenyl column and a mobile phase containing γ-cyclodextrin

Abscisic acid (2-cis,4-trans-abscisic acid) is a plant hormone that has an asymmetric carbon atom. We tried to separate the enantiomers of native abscisic acid by HPLC using a phenyl column and a chiral mobile phase containing γ-cyclodextrin. The optimum mobile phase conditions were found to be 0.8% (w/v) γ-cyclodextrin, 4% (v/v) acetonitrile, and 20 mM phosphate buffer (pH 6.0). It was found that (R)-abscisic acid was earlier detected than (S)-abscisic acid. Since γ-cyclodextrin is hardly retained on a phenyl column, it was suggested that (R)-abscisic acid formed a more stable complex with γ-cyclodextrin than the (S)-abscisic acid. Abscisic acid in an acacia honey sample was successfully enantioseparated with the proposed method and only (S)-abscisic acid was detected. A biologically inactive 2-trans,4-trans-abscisic acid, which was prepared by irradiation of abscisic acid with a light-emitting diode lamp at 365 nm, was partially enantioseparated by the proposed method. Since the irradiation of (S)-abscisic acid-induced cis-to-trans isomerization to produce one 2-trans,4-trans-abscisic acid enantiomer, it is reasonable that racemization did not proceed during the cis-to-trans isomerization. (S)-Abscisic acid and probably (S)-2-trans,4-trans-abscisic acid were detected in a honey sample, where the peak area of (S)-abscisic acid was 7 times larger than that of (S)-2-trans,4-trans-abscisic acid.     

Determination of quinoxaline-2-carboxylic acid, the major metabolite of carbadox, in porcine liver by isotope dilution gas chromatography-electron capture negative ionization mass spectrometry

A sensitive and robust method using isotope dilution gas chromatography-electron capture negative chemical ionization mass spectrometry (GC-ECNI-MS) was developed and validated for the analysis of quinoxaline-2-carboxylic acid (QCA) in porcine liver. [²H₄]QCA was added to liver samples which were then deproteinated with 2% metaphosphoric acid in 20% methanol. Followed by sequential extraction with water-saturated ethyl acetate and phosphate buffer, the buffer extracts were subject to solid-phase extraction clean-up by mixed mode anion-exchange columns. QCA was derivatized with N-methyl-N-tert-butyldimethylsilyltrifluoroacetamide (MTBSTFA) prior to GC-ECNI-MS determination. For unambiguous identification, a second GC-ECNI-MS experiment was performed on suspected positive samples which were derivatized independently with another derivatization agent, trimethylsilyldiazomethane. Excellent recovery and precision were obtained and the limit of quantitation was 0.7 μg/kg (S/N>60). Method ruggedness by Taguchi orthogonal array technique is also presented.     

Solid-phase microextraction with on-fiber derivatization for the analysis of anti-inflammatory drugs in water samples

A sensitive and solvent-free procedure for the determination of non-steroidal acidic anti-inflammatory drugs in water samples was optimized using solid-phase microextraction (SPME) followed by on-fiber silylation of the acidic compounds and gas chromatography-mass spectrometry (GC-MS) determination. Microextraction was carried out directly over the filtered water samples using a polyacrylate fiber. Derivatization was performed placing the SPME fiber, loaded with the extracted analytes, in the headspace of a vial containing 50 microl of N-methyl-N-(tert-butyldimethylsilyl)-trifluoroacetamide (MTBSTFA). Derivatives were desorbed for 3 min in the GC injector. Influence of several parameters in the efficiency of microextraction (volume of sample, time, pH, type of fiber coating, etc.) and derivatization steps (time, temperature and volume of MTBSTFA) was systematically investigated. In the optimal conditions an excellent linearity over three orders of magnitude and quantification limits at the ng/l level (from 12 to 40 ng/l) were achieved. The proposed method was applied to the determination of acidic compounds in sewage water and results compared to those obtained using solid-phase extraction (SPE) followed by the derivatization of the compounds in the organic extract of the solid-phase extraction cartridge.     

Analysis of poly-beta-hydroxybutyrate in environmental samples by GC-MS/MS

Application of gas chromatography-mass spectrometry (GC-MS) can significantly improve trace analyses of compounds in complex matrices from natural environments compared to gas chromatography only. A GC-MS/MS technique for determination of poly-beta-hydroxybutyrate (PHB), a bacterial storage compound, has been developed and used for analysis of two soils stored for up to 319 d, fresh samples of sewage sludge, as well as a pure culture of Bacillus megaterium. Specific derivatization of beta-hydroxybutyrate (3-OH C4:0) PHB monomer units by N-tert-butyl-dimethylsilyl-N-methyltrifluoracetamide (MTBSTFA) improved chromatographic and mass spectrometric properties of the analyte. The diagnostic fragmentation scheme of the derivates tert-butyldimethylsilyl ester and ether of beta-hydroxybutyric acid (MTBSTFA-HB) essential for the PHB identification was shown. The ion trap MS was used, therefore the scan gave the best sensitivity and with MS/MS the noise decreased, so the S/N was better and also with second fragmentation the amount of ions increased compared to SIM. The detection limit for MTBSTFA-HB by GC-MS/MS was about 10(-13) g microL(-1) of injected volume, while by GC (FID) and GC-MS (scan) it was around 10(-10) g microL(-1) of injected volume. Sensitivity of GC-MS/MS measurements of PHB in arable soil and activated sludge samples was down to 10 pg of PHB g(-1) dry matter. Comparison of MTBSTFA-HB detection in natural soil sample by GC (FID), GC-MS (scan) and by GC-MS/MS demonstrated potentials and limitations of the individual measurement techniques.     

Highly sensitive method for the determination of 5-fluorouracil in biological samples in the presence of 2'-deoxy-5-fluorouridine by gas chromatography-mass spectrometry

A highly sensitive and convenient gas chromatographic-mass spectrometric (GC-MS) method is described for the determination of 5-fluorouracil in the presence of 2'-deoxy-5-fluorouridine (which breaks down into 5-fluorouracil during ordinary GC derivatization) in biological samples such as plasma and urine. After extraction with ethyl acetate, 5-fluorouracil and 5-chlorouracil, the latter being used as an internal standard, were converted into their tert.-butyldimethylsilyl derivatives by allowing the mixture to stand for 30 min at room temperature and were assayed by electron-impact ionization GC-MS. Under these conditions, 2'-deoxy-5-fluorouridine did not decompose or interfere with the determination of 5-fluorouracil. The assay method, including the extraction and tert.-butyldimethylsilyl derivatization of 5-fluorouracil, showed good linearity in the range 0-100 ng/ml for 5-fluorouracil in plasma (detection limit 0.5 ng/ml) and urine (detection limit 1 ng/ml). The usefulness of this method was demonstrated by determining plasma concentrations of 5-fluorouracil in rats treated intravenously with 5-fluorouracil and 2'-deoxy-5-fluorouridine.     

Optimizing gas chromatographic-mass spectrometric analysis of selected pharmaceuticals and endocrine-disrupting substances in water using factorial experimental design

An analytical method based on gas chromatography-mass spectrometry (GC-MS) has been developed to simultaneously determine selected acidic and neutral pharmaceuticals and endocrine-disrupting substances in surface and tap water. Solid-phase extraction (SPE) with Oasis HLB cartridges is followed by derivatization of the target analytes in the eluted extract. Derivatization was systematically optimized by employing a factorial experimental design. More specifically a central composite design was applied to search for the optimal conditions of the derivatization process and it was demonstrated that N-methyl-N-tert-butyl-dimethysilyl-trifluoroacetamide (MTBSTFA) had a better overall performance compared to N,O-bis(trimethylsilyl) trifluoroacetamide (BSTFA). The influence of solvent ratios and elution volumes while using SPE were also studied using a factorial design. The method was developed successfully for most of the selected compounds [i.e. ibuprofen, salicylic acid, gemfibrozil, naproxen, triclosan, propranolol, diclofenac, carbamazepine, 4-octylphenol (OP), 4-nonylphenol (NP), nonylphenol-monoethoxylate (NP1EO), nonylphenoxyacetic acid (NP1EC), estrone (E1), and 17alpha-ethinyloestradiol (EE2)]. Relative recoveries for spiked river and tap water ranged from 47 to 130% and 60-109%, respectively. Typical limits of detection were less than 5 ng/L in tap water and less than 10 ng/L in river water. Twelve target compounds were detected in river and tap water samples using the developed method. This method is currently used in bench-scale drinking water treatment studies.