Immuno-affinity columns versus conventional clean-up: a method-comparison study for the determination of zearalenone in corn

The efficiency of a modern analytical method employing immuno-affinity columns (IACs) is compared to a well established traditional technique with respect to the determination of zearalenone (ZON) in corn in the μg/kg range. Despite of a constant error of about 4 μg/kg in the examined working range of 10–200 μg/kg, analytical data obtained from the analysis of spiked and naturally contaminated samples showed good correspondence for the compared methods. The performance characteristics of immuno-affinity-chromatography as a new clean-up technique for the determination of ZON in corn is reported for the first time and compared to a conventional clean-up procedure Received: 25 March 1997 / Revised: 5 May 1997 / Accepted: 12 May 1997     

Interlaboratory comparison study for the determination of the Fusarium mycotoxins deoxynivalenol in wheat and zearalenone in maize using different methods

Seventeen laboratories from six different countries, using their usual in-house methods, participated in an interlaboratory comparison test for the determination of the Fusarium mycotoxins deoxynivalenol (DON) in wheat and zearalenone (ZON) in maize. The toxins generally were extracted from maize and wheat employing mixtures of water, acidified water with an organic solvent or even pure water (for DON). While participants who used enzyme linked immuno sorbent assays (ELISA) for the determination of DON did not perform any clean-up, various techniques were applied for the purification of raw extracts (e.g. liquid/liquid extraction, solid phase extraction (SPE), immuno affinity chromatography (IAC)). For the final separation/quantification step either high performance liquid chromatography (HPLC) (mostly for ZON), gas chromatography (GC) (for DON) or ELISA were employed by participants. The aim of this study was to obtain information about the state of the art of mycotoxin analysis in cereals and to support a knowledge and experience exchange between the participating laboratories in the field of mycotoxin analysis. For each mycotoxin 5 different sample types were distributed, standard solutions (10.10 μg/ml ZON in methanol, 10.09 μg/ml DON in ethyl acetate), blank materials, spiked samples (75.1 μg/kg and 378.3 μg/kg ZON in maize, 126.2 μg/kg and 2519 μg/kg DON in wheat) and naturally contaminated maize and wheat. Coefficients of variation (CV) between laboratory mean results (outliers excluded) ranged from 6.2 to 27.7% for ZON and from 18.9 to 30.0% for DON. Except for the maize samples spiked at 75.1 μg/kg ZON the overall means (outliers rejected) statistically could not be distinguished from the respective target values. Average recoveries of the reported results ranged from 87.7 to 96.2% for ZON and from 94.2 to 108.5% for DON. Received: 2 December 1996 / Revised: 17 February 1997 / Accepted: 18 February 1997     

Global geometry optimization of small silicon clusters at the level of density functional theory

By an application to small silicon clusters Si _N (with N = 4,5,7,10) it is shown that truly global geometry optimization on an ab initio or density functional theory level can be achieved, at a computational cost of approximately 1–5 traditional local optimization runs (depending on cluster size). This extends global optimization from the limited area of empirical potentials into the realm of ab initio quantum chemistry. Received: 24 February 1998 / Accepted: 6 March 1998 / Published online: 17 June 1998     

Determination of zearalenone and its metabolites in endometrial cancer by coupled separation techniques

This study presents a selective method of isolation of zearalenone (ZON) and its metabolite, α-zearalenol (α-ZOL), in neoplastically changed human tissue by accelerated solvent and ultrasonic extractions using a mixture of acetonitrile/water (84/16% v/v) as the extraction solvent. Extraction effectiveness was determined through the selection of parameters (composition of the solvent mixture, temperature, pressure, number of cycles) with tissue contamination at the level of nanograms per gram. The produced acetonitrile/water extracts were purified, and analytes were enriched in columns packed with homemade molecularly imprinted polymers. Purified extracts were determined by liquid chromatography (LC) coupled with different detection systems (diode array detection - DAD and mass spectrometry - MS) involving the Ascentis RP-Amide as a stationary phase and gradient elution. The combination of UE-MISPE-LC (ultrasonic extraction - molecularly imprinted solid-phase extraction - liquid chromatography) produced high (R ≈ 95–98%) and repeatable (RSD < 3%) recovery values for ZON and α-ZOL.     

An ab initio study of the conformational preferences of Hoechst 33258 in gas-phase and aqueous solution environments

A quantum mechanical study of the conformational preferences of Hoechst 33258, a synthetic minor groove-binding drug, has been performed in both gas-phase and aqueous solution. Gas-phase calculations were performed at the HF/6-31G(d) and MP2/6-31G(d) levels of theory, whereas calculations in the aqueous solution phase were performed using the PCM model with the 6-31G(d) basis set. The molecule was divided into three fragments, which were submitted to a systematic and detailed conformational study. The results clearly indicate that Hoechst 33258 does not adopt a planar conformation in either the gas-phase or aqueous solution. Thus, a folded conformation is not induced by binding of the molecule to DNA, but is an intrinsic property of the compound. Received: 3 March 1998 / Accepted: 29 May 1998 / Published online 19 August 1998     

A comparison of the extraction of clove buds with supercritical carbon dioxide and superheated water

Supercritical carbon dioxide and superheated water (subcritical water above 100 °C under pressure) have both been used to extract the buds of cloves (Syzygium aromaticum). The yields of eugenol and eugenyl acetate obtained by these methods and also by steam distillation and liquid solvent (Soxhlet) extraction are similar, but the yields of caryophyllene were lower for the methods using water. Received: 23 December 1998 / Revised: 26 March 1999 / Accepted: 31 March 1999     

A comparison of the extraction of clove buds with supercritical carbon dioxide and superheated water

Supercritical carbon dioxide and superheated water (subcritical water above 100 °C under pressure) have both been used to extract the buds of cloves (Syzygium aromaticum). The yields of eugenol and eugenyl acetate obtained by these methods and also by steam distillation and liquid solvent (Soxhlet) extraction are similar, but the yields of caryophyllene were lower for the methods using water. Received: 23 December 1998 / Revised: 26 March 1999 / Accepted: 31 March 1999     

Simultaneous determination of deoxynivalenol,zearalenone, and their major masked metabolites in cereal-based food by LC–MS–MS

Cereals and cereal-based food have often been found to be contaminated with the mycotoxins deoxynivalenol (DON) and zearalenone (ZON), after infection of the grain with the pathogenic fungus Fusarium. Both the pathogen and the infected plants can chemically modify DON and ZON, including acetylation, glucosidation, and sulfation. Analytical strategies for detection and quantification of DON and ZON are well known and established but often fail to recognize the respective metabolites, which are, therefore, also referred to as “masked” mycotoxins. However, several masked forms are also known to be harmful to mammals. Failure to detect these could lead to significant underestimation of the toxic potential of a particular sample. To monitor the levels of DON and ZON metabolites in cereals and cereal-based food, we have developed a LC–MS–MS method capable of simultaneous determination of DON, ZON, and eight of their masked metabolites, namely deoxynivalenol-3-glucoside (D3G), 3-acetyl-deoxynivalenol (3ADON), zearalenone-4-glucoside (Z4G), α-zearalenol (α-ZOL), β-zearalenol (β-ZOL), α-zearalenol-4-glucoside (α-ZG), β-zearalenol-4-glucoside (β-ZG), and zearalenone-4-sulfate (Z4S). The suitability of several cleanup strategies including C₁₈-SPE, primary and secondary amines (PSA), MycoSep push-through columns, and immunoaffinity columns was evaluated. The final method used no sample cleanup and was successfully validated for four cereal-based food matrices, namely cornflour, porridge, beer, and pasta, showing good recoveries and precision for all analytes.     

Fractionation of polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans and planar polychlorinated biphenyls by high performance liquid chromatography on a pyrenyl-silica column

Analytical procedures for the determination of polychlorinated dibenzo-p-dioxins (PCDD), polychlorinated dibenzofurans (PCDF) and non-ortho polychlorinated biphenyls (PCB) require a fractionation step to separate PCDD/F from planar PCB and the bulk of PCB. An HPLC method which achieves the separation of the bulk of PCB (0–6 mL of hexane), mono-ortho PCB (6–8 mL of hexane), non-ortho PCB (8–15 mL of hexane) and PCDD/F (15–50 mL of toluene) on a PYE column (2-(1-pyrenyl) ethyldimethylsilylated silica gel) in a single step without the use of backflush as other authors proposed was developed. The method shows a good accuracy and precision and it is linear in the range studied, e.g from 5.8 to 2420 pg injected in HPLC for TCDD/F, from 28.8 to 12100 pg for PeCDD/F, HxCDD/F, HpCDD/F and from 57.6 to 24200 pg for OCDD/F. It has been successfully applied to the analysis of technical mixtures of PCB (Aroclors), a pine wood sample and several water samples of different origins. Received: 29 November 1998 / Revised: 25 February 1999 / Accepted: 3 March 1999     

Highly hydrophobically modified polyelectrolytes: Field variables to control emulsion type

Highly hydrophobically modified (with n-dodecylamide chain) linear poly(acrylic acid)s (HHMPAAH) and poly(sodium acrylate)s (HHMPAANa) with various degrees of grafting (τ) were synthesized and used as emulsifiers of the n-dodecane/water system. The type of emulsion, oil in water (O/W) or water in oil (W/O), was investigated as a function of the polymer chemical structure (τ, salt or acid form of the copolymer) and aqueous phase electrolyte concentration (NaNO₃). Increasing τ and/or salt concentration was found to favor the formation of inverse emulsions. Direct liquid–liquid dispersions are more likely to form with poly(sodium acrylate)s than with poly(acrylic acid)s. Hence, field variables such as τ, pH and ionic strength are relevant parameters to control emulsion type. Moreover, a balanced polyelectrolyte neither soluble in oil nor in water was synthesized for the first time. With this original emulsifier, the dispersion type was found to change from O/W to W/O with polymer salting out. The work provides convenient model system for fundamental studies of polymer conformation at liquid–liquid interfaces. Received: 31 March 1998 Accepted: 30 April 1998     

Fractionation of polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans and planar polychlorinated biphenyls by high performance liquid chromatography on a pyrenyl-silica column

Analytical procedures for the determination of polychlorinated dibenzo-p-dioxins (PCDD), polychlorinated dibenzofurans (PCDF) and non-ortho polychlorinated biphenyls (PCB) require a fractionation step to separate PCDD/F from planar PCB and the bulk of PCB. An HPLC method which achieves the separation of the bulk of PCB (0–6 mL of hexane), mono-ortho PCB (6–8 mL of hexane), non-ortho PCB (8–15 mL of hexane) and PCDD/F (15–50 mL of toluene) on a PYE column (2-(1-pyrenyl) ethyldimethylsilylated silica gel) in a single step without the use of backflush as other authors proposed was developed. The method shows a good accuracy and precision and it is linear in the range studied, e.g from 5.8 to 2420 pg injected in HPLC for TCDD/F, from 28.8 to 12100 pg for PeCDD/F, HxCDD/F, HpCDD/F and from 57.6 to 24200 pg for OCDD/F. It has been successfully applied to the analysis of technical mixtures of PCB (Aroclors), a pine wood sample and several water samples of different origins. Received: 29 November 1998 / Revised: 25 February 1999 / Accepted: 3 March 1999     

Certification of total arsenic, dimethylarsinic acid and arsenobetaine contents in a tuna fish powder (BCR-CRM 627)

Tuna fishes were collected in the Straits of Messina (Italy), were dissected and dorsal muscles minced, freeze-dried, ground and sieved. The obtained powder was stabilised by γ-irradiation and filled into brown glass bottles. The homogeneity and stability at +20 °C and +40 °C were verified with regards to the total arsenic, dimethylarsinic acid and arsenobetaine contents. Ten laboratories participated in the certification study. All participants had demonstrated beforehand their ability to produce accurate results for the As speciation in fish tissue. The certified values are: total arsenic (4.8 ± 0.3) mg/kg, arsenobetaine (52 ± 3) μmol/kg, dimethylarsinic acid (2.0 ± 0.3) μmol/kg. The material is available from the BCR since early 1998. Received: 31 March 1998 / Revised: 20 July 1998 / Accepted: 25 July 1998     

Structure and stabilities of (HA1NH)n (n = 2–4)

Ab initio molecular electronic structure methods have been used to study the relative stability of the planar inorganic ring (HAlNH)_n (n = 2–4) during homodesmotic and monomer polymerization reactions. Optimized geometries, frequencies and energies through restricted Hartree-Fock/6-31G* are reported, and energies at the self-consistent field optimized geometries including M?ller-Plesset fourth perturbation theory with single, double and quadruple excitation (MP4SDQ) corrections are also reported for both reactions. Homodesmotic reactions with MP4SDQ −28.5 kcal/mol for (AlN)₂, 1.9 kcal/mol for (AlN)₃ and −0.97 kcal/mol for (AlN)₄. On analysing a π-molecular orbitals diagram, only one, three and three strongly bonding π-molecular orbitals exist for the planar four-, six- and eight-membered AlN rings, respectively. Received: 9 March 1998 / Accepted: 19 March 1998 / Published online: 23 June 1998     

Isomer combinatorics for acyclic conjugated polyenes: enumeration and beyond

A combinatorial approach to fully conjugated acyclic polyenes (C _N H _{N +2}) is considered with a view to the extension of standard enumeration techniques to treat a widened range of chemically interesting features. As a first step, enumerations are made respecting: placement of single and double bonds, the occurrence of cis/trans isomers, and the degree (and type) of “radicality” of such conjugated networks. As a further extension, several structural (graph-theoretic) invariants averaged over various types of isomer classes and sub-classes are made, and then these invariants are utilized to estimate several physicochemical properties averaged over these same classes or sub-classes. The properties currently so considered are heats of formation, indices of refraction, and magnetic susceptibilities. Finally, the asymptotic behaviors of isomer counts and isomer properties in the many-atom limit is elaborated. Received: 10 August 1998 / Accepted: 17 November 1998 / Published online: 16 March 1999     

Co-isolation of deoxynivalenol and zearalenone with sol–gel immunoaffinity columns for their determination in wheat and wheat products

The paper describes a sample clean-up method for the co-isolation of deoxynivalenol (DON) and zearalenone (ZON), two mycotoxins naturally co-occurring in wheat. The method is based on immunoaffinity columns prepared by co-immobilising anti-DON and anti-ZON antibodies in a porous sol–gel glass. The main task in developing the method consisted in finding a loading medium allowing retention of both analytes as well as a common elution medium for the dissociation of both antigen–antibody complexes formed. This can be achieved by co-extracting DON and ZON with ACN–water (60:40, v/v), reducing the acetonitril concentration to 2.5% before loading an aliquot of the diluted sample extract onto the DON/ZON column. The columns are washed with 5 ml of MeOH–water (10:90, v/v) before DON and ZON are co-eluted with 4 ml of ACN–water (50:50, v/v). Concentrations of DON and ZON are determined with HPLC-UV and HPLC-fluorescence detection, respectively. The sample clean-up method was shown to be applicable to wheat and wheat products, e.g., cornflakes, milk wheat mash and rusk. Spiking experiments (spike level 500 μg DON/kg and 50 μg ZON/kg) resulted in recovery rates from 82% to 111%.     

Why betaine crystallizes in high local Cs symmetry. An ab initio MO and DFT study of anhydrous betaine and betaine monohydrate

A theoretical study of the structure, charge distribution, rotational barrier and fundamental vibrations of anhydrous betaine (CH₃)₃NCH₂COO (trimethylglycine) was carried out and compared with available experimental data. Calculations were carried out at HF, MP2 and B3LYP levels using a 6-31+G(d,p) basis set. The calculated rotational barrier of the betaine carboxylic group is 40.5 kJ/mol at the MP4(SDQ)/6-311G(d,p)//HF/6-31+G(d,p) level of theory. The rotation of the carboxylic group changes the molecule from a highly symmetric (C _s ) conformation into a twisted conformation resulting in shortening of the molecule by about 50 pm. Natural population analysis (NPA) indicates intramolecular interaction between the carboxylic oxygen and the nearest methyl hydrogens resulting in internal hydrogen bonding. MP4(SDQ)/6-311G(d,p) single-point NPA calculations on a betaine monohydrate model taken from the X-ray geometry show an expected weakening in the internal hydrogen bond. Calculations explain why betaine preferentially crystallizes in high local C _s symmetry. Received: 24 March 1998 / Accepted: 3 September 1998 / Published online: 7 December 1998     

Determination of lead in waters and sediments from the wetland Tablas de Daimiel National Park (Spain)

Electrothermal atomic absorption spectrometry (ETAAS) has been used for lead control in waters and sediments of the wetland Tablas de Daimiel National Park. The lead determination in the wetland water is hindered by an enhanced salt content, so matrix interference was evaluated. The use of stabilized temperature platform atomization technique, Zeeman background correction and palladium nitrate as matrix modifier were found advisable. For the sediments a closed-vessel microwave dissolution method has been proposed using a mixture of HCl-HNO₃-HF and a heating time of 90 s. With subsequent ETAAS using platform atomization and Zeeman background correction, no chemical modification was necessary. Using these conditions, the interferences were completely removed for both waters and sediments and the calibration curve in ultrapure water (1% nitric acid) was linear up to 30 μg/L. The detection limits for waters and sediments were 0.95 μg/L and 0.78 μg/g, respectively. The accuracy of the proposed method for sediments was validated by analyzing certified reference materials (obtained values were within the certified ones) and spiked wetland sediments (mean recovery of 99.0%). Received: 11 October 1998 / Revised: 3 December 1998 / Accepted: 11 March 1999     

Determination of lead in waters and sediments from the wetland Tablas de Daimiel National Park (Spain)

Electrothermal atomic absorption spectrometry (ETAAS) has been used for lead control in waters and sediments of the wetland Tablas de Daimiel National Park. The lead determination in the wetland water is hindered by an enhanced salt content, so matrix interference was evaluated. The use of stabilized temperature platform atomization technique, Zeeman background correction and palladium nitrate as matrix modifier were found advisable. For the sediments a closed-vessel microwave dissolution method has been proposed using a mixture of HCl-HNO₃-HF and a heating time of 90 s. With subsequent ETAAS using platform atomization and Zeeman background correction, no chemical modification was necessary. Using these conditions, the interferences were completely removed for both waters and sediments and the calibration curve in ultrapure water (1% nitric acid) was linear up to 30 μg/L. The detection limits for waters and sediments were 0.95 μg/L and 0.78 μg/g, respectively. The accuracy of the proposed method for sediments was validated by analyzing certified reference materials (obtained values were within the certified ones) and spiked wetland sediments (mean recovery of 99.0%). Received: 11 October 1998 / Revised: 3 December 1998 / Accepted: 11 March 1999     

An electron-microscopic study of Na-attapulgite particles

A scheme for the separation, purification and preparation of sub-micron, homoionic, Na-attapulgite from a natural mineral deposit is presented together with represen-tative analysis of the particle size distribution. Transmission electron microscopic examination indicated that particles were predominantly <1μm long and “lath-like” with aspect ratios (length:width:thickness) 100:3:1 which provide for a variety of modes of particle/particle interaction. The scheme involves physical and mild chemical treatment of the natural material and appears to preserve the physico-chemical integrity of the attapulgite particles and provides material within a narrow size range. Received: 30 March 1998 Accepted: 27 April 1998     

Determination of biogenic amines in fermented beverages and vinegars by pre-column derivatization withpara-nitrobenzyloxycarbonyl chloride (PNZ-Cl) and reversed-phase LC

Summary The reagentp-nitrobenzyloxycarbonyl chloride (PNZ-CI) was used for pre-column derivatization of biogenic amines (BAs) at ambient temperature followed by reversed-phase, liquid-chromatographic separation of the derivatives. Optimized derivatization of samples was achieved within 10 min in borate buffer by adding PNZ-Cl in acetonitrile (MeCN). Excess reagent was scavenged by subsequent addition of glycine in water. For LC a Superspher^? RP-18e column and gradient elution using a ternary gradient system containing sodium acetabe buffer (pH 6.1), sodium acetate buffer (pH 4.3) and MeCN, were used. The PNZ-derivatives were quantified by their UV-absorption at 265 nm. Detection limits of BAs were approximately 62–1000 μg L⁻¹ (injected amounts: 53–850 pg) at a signal-to-noise ratio of 3:1. The coefficients of determination were 0.9906–0.9992. Diaminohexane was used as internal standard. Recoveries of BAs ranged from 78–93% depending on the food matrix. This method was applied to the quantitative determination of 2-phenylethylamine, tryptamine, serotonin, putrescine, histamine, cadaverine, tyramine, spermidine, and spermine, in beer, wine, vinegars, and lactic fermented cabbage juice. Parts of the results were presented at the 35th Congress of the “Deutsche Gesellschaft für Ern?hrung”, Kiel, 19^th–20^th March 1998, and the “Regionaltagung der Lebensmittelchemiker”, Giessen, 9^th–10^th March 1998