Experimental verification of a predicted, previously unseen separation selectivity pattern in the capillary electrophoretic separation of noncharged enantiomers by octakis(2,3-diacetyl-6-sulfato)-gamma-cyclodextrin

The capillary electrophoretic separation of noncharged enantiomers with single-isomer anionic resolving agents is reexamined here with the help of the charged resolving agent migration model. Two general model parameters have been identified that influence the effective mobility, separation selectivity and mobility difference curves of the enantiomers: parameter b, called binding selectivity (K(RCD)/K(SCD)), and parameter s, called size selectivity (mu(o)RCD/mu(o)SCD). Analysis of the model in terms of these parameters indicates that in addition to the known, previously observed separation selectivity vs. resolving agent concentration patterns, a new pattern, increasing separation selectivity with increasing resolving agent concentration, is also possible provided that (i) K(RCD)/K(SCD)<1 and mu(o)RCD/mu(o)SCD>1 and (K(RCD)mu(o)RCD)/(K(SCD)mu(o)SCD)>1, or (ii) K(RCD)/ K(SCD)>1 and mu(o)SCD/mu(o)SCD<1 and (K(RCD)mu(o)RCD)/(K(SCD)mu(o)SCD)<1. This hitherto unseen separation selectivity pattern was experimentally verified during the capillary electrophoretic separation of the enantiomers of O-isopropyl p-nitrophenyl methylphosphonate with the single-isomer octakis(2,3-diacetyl-6-sulfato)-gamma-cyclodextrin as resolving agent.     

Separation selectivity patterns in the capillary electrophoretic separation of anionic enantiomers by octakis-6-sulfato-gamma-cyclodextrin

The capillary electrophoretic separation of anionic enantiomers with multiply-charged, single-isomer, anionic resolving agents was reexamined with the help of the charged resolving agent migration model. Three general model parameters were identified that influence the shape of the separation selectivity and enantiomer mobility difference curves: parameter b, the binding selectivity (K(RCD)/K(SCD)), parameter s, the size selectivity (micro0RCD/micro0SCD), and parameter a, the complexation-induced alteration of the analyte's mobility (micro0SCD/micro0). Function analysis of the model indicates that there are six unique separation selectivity vs. resolving agent concentration patterns: in two of the patterns, separation selectivity asymptotically increases to the limiting value set by parameter b; in two other patterns, separation selectivity passes a local maximum and asymptotically decreases to the limiting value set by parameter b; and in the last two patterns, separation selectivity passes a local maximum, decreases to unity, then, after reversal of the intrinsic migration order, asymptotically increases to the limiting value set by parameter b. Though the patterns with asymptotically increasing selectivities were observed in earlier work, this paper reports the first experimental verification of the existence of the local selectivity maximum during the capillary electrophoretic separation of the enantiomers of several weak acids in high pH background electrolytes with octakis-6-sulfato-gamma-cyclodextrin as the resolving agent.     

Enantiomer separations by nonaqueous capillary electrophoresis using octakis(2,3-diacetyl-6-sulfato)-gamma-cyclodextrin

The newest member of the single-isomer isomer sulfated cyclodextrin family, octakis(2,3-diacetyl-6-sulfato)-gamma-cyclodextrin (ODAS-gamma-CD) was used for the first time as a resolving agent for the nonaqueous capillary electrophoretic separation of the enantiomers of 26 weak base pharmaceuticals in an acidic methanol background electrolyte. The solubility limit of ODAS-gamma-CD at room temperature proved to be 55 mM in this background electrolyte, which afforded good, fast enantiomer separations for most of the basic drugs tested. For all the bases studied, the effective mobilities and separation selectivities were found to follow the predictions of the charged resolving agent migration model of electrophoretic enantiomer separations. The effective mobilities of the weakly binding weak bases remained cationic throughout the entire 0 to 45 mM ODAS-gamma-CD concentration range; separation selectivities increased as the ODAS-gamma-CD concentration was increased. The effective mobilities of the moderately binding weak bases became anionic in the 2.5 to 45 mM ODAS-gamma-CD concentration range; separation selectivities first increased as the effective mobilities approached zero, then decreased again as the ODAS-gamma-CD concentration was increased further. The effective mobilities of the strongly binding weak bases became anionic in the 0 to 2.5 mM ODAS-gamma-CD concentration range; separation selectivities decreased as the ODAS-gamma-CD concentration was increased above 2.5 mM.     

Enhancement of second-migrating enantiomer peak symmetry of basic drugs by using dual-cyclodextrin system in capillary electrophoresis

Today, chiral separations of cationic drugs by capillary electrophoresis are generally carried out by adding negatively charged cyclodextrins (CDs) to the running buffer while anionic or neutral drug separations require the use of dual-CD systems (mixtures of neutral and charged CDs). Chiral separation of some basic drugs (idazoxan, efaroxan, milnacipran) has been studied by using mixtures of sulfated-beta-CD (S-beta-CD) and hydroxypropyl-gamma-CD (HP-gamma-CD). The influence of the following parameters (nature and concentration of neutral CD, concentration of S-gamma-CD) on many separation factors (electrophoretic mobility, selectivity, efficiency, asymmetry factor, resolution) demonstrated that dual-CD systems are useful for chiral separation of basic drugs in order to improve the symmetry of the second-migrating enantiomer. Indeed, the neutral CD reduces the extent of electromigration dispersion by mobility tuning. Finally, the 0.5 mg/mL S-beta-CD/5 mg/mL HP-gamma-CD dual system has allowed the chiral separation of idazoxan, efaroxan and milnacipran enantiomers in less than 9 min.     

A family of single-isomer,sulfated gamma-cyclodextrin chiral resolving agents for capillary electrophoresis: octa(6-O-sulfo)-gamma-cyclodextrin

The second member of the single-isomer, sulfated gamma-cyclodextrin family, the sodium salt of octa(6-O-sulfo)-gamma-cyclodextrin (OS) has been synthesized, characterized and used to separate the enantiomers of nonelectrolyte, acidic, basic, and ampholytic analytes by capillary electrophoresis in acidic aqueous background electrolytes. The anionic effective mobilities of the nonelectrolyte and anionic analytes increased with increasing concentration of OS. The effective mobilities of strongly complexing cationic analytes became anionic with very low OS concentrations and passed local anionic effective mobility maxima as the OS concentration, and along with it, the ionic strength, of the background electrolyte increased. The effective mobilities of the weakly binding cationic analytes became only slightly anionic at high OS concentration values and did not show the local anionic effective mobility maxima. For nonelectrolyte analytes, separation selectivities decreased with increasing OS concentration. For cationic analytes, separation selectivities were highest where the effective mobilities of the less mobile enantiomers approached zero. OS proved to be a broadly applicable chiral resolving agent.     

Use of single-isomer, multiply charge chiral resolving agents for the continuous, preparative-scale electrophoretic separation of enantiomers based on the principle of equal-but-opposite analyte mobilities

A novel approach to continuous, preparative-scale electrophoretic enantiomer separations has been developed based on the observation that stable, equal-but-opposite effective mobilities can be created for the enantiomers of a single-charged analyte by complexing them with a single-isomer, multiply charged resolving agent, provided that the charge of the resolving agent is opposite in sign to that of the uncomplexed analyte enantiomers. When such an analyte-resolving agent system is fed into a continuous, free-flow electrophoretic apparatus, stable, steady-state operating conditions can be established which permit the continuous feeding of the racemic analyte and the collection of pure enantiomers at the opposite sides of the feed stream. This concept is demonstrated via the separation of the enantiomers of terbutaline using heptakis-6-sulfato beta-cyclodextrin as resolving agent, affording production rates as high as 2.8 mg/h in the general-purpose, continuous free-flow electrophoretic system, the Octopus.     

Chiral separation in capillary electrophoresis using dual neutral cyclodextrins: theoretical models of electrophoretic mobility difference and separation selectivity

Simple equations and theoretical models, related to enantioselectivity (kappa) and C, have been developed for prediction of electrophoretic mobility difference (Deltamu) and separation selectivity (alpha) for enantiomers in CE using dual CDs, where alpha and kappa are defined as the ratio of mu and the ratio of binding constant (K) for enantiomers to each CD, respectively, C the CD concentration, and the average K for enantiomers and each CD. Experiments were carried out using dual CDs as beta-CD and dimethyl-beta-cyclodextrin (DM-beta-CD) and test analytes as five pairs of amphetamine drug enantiomers. A change in observed Deltamu and alpha of enantiomers in dual CDs was found to be in excellent agreement with the theoretical models. For example, in comparison with single CD1, dual CDs can enhance Deltamu and alpha up to the maximum value when enantiomers migrate with the same order in CD1 and CD2, and have the value of rho > 1.0, where rho is the enantioselectivity ratio for CD2 to CD1, while worse Deltamu and alpha are obtained for enantiomers with rho < 1.0.     

Capillary electrophoretic separation of the enantiomers of organophosphates with a phosphorus stereogenic center using the sodium salt of octakis(2,3-diacetyl-6-sulfo)-gamma-cyclodextrin as resolving agent

The sodium salt of the single-isomer, chiral resolving agent, octakis(2,3-diacetyl-6-sulfo)-gamma-cyclodextrin (ODAS-gammaCD) has been used for the capillary electrophoretic separation of the enantiomers of alkylarylphosphates which carry a phosphorus-based stereogenic center. The effective mobilities and separation selectivities were measured at different ODAS-gammaCD and methanol concentrations to find the conditions under which the minor enantiomers could be adequately quantitated in samples obtained by chemical resolution of the racemic mixtures. This work extends the utility of ODAS-gammaCD to a hitherto unexplored field, the capillary electrophoretic separation of the enantiomers of organophosphorus compounds.     

Single-run separation of cationic, anionic, and polyanionic compounds by CE-ESI-MS

A method for a single-run separation of cationic, anionic, and polyanionic compounds by CE hyphenated to ESI MS (CE-ESI-MS) is described. One of the main issues for coupling CE to MS with an ESI source consists in maintaining an electric contact for the electrophoretic separation. This condition is only performed if a liquid flow arising from the separation capillary is directed to the needle, making it coupling-compatible. This latter situation is incompatible with the separations of polyanionic compounds of higher electrophoretic mobility (in absolute value) than the electroosmotic mobility, performed in bare fused-silica capillaries under a negative polarity. In this study, several alternative approaches were evaluated to circumvent this difficulty, and applied to the setup of the CE-MS separation of a mixture containing both cationic and polyanionic compounds, which are synthesis intermediates of contrast agents for medical imaging. Eventually, the detection of the cationic and anionic compounds in a single run could be obtained by either using neutrally coated polymethylsiloxane (DB-1) capillaries and simultaneously applying a negative voltage polarity and a pressure allowing to compensate for the residual cathodic EOF or by dynamically modifying the inner wall of a bare fused-silica capillary with a polycationic polymer (hexadimethrine bromide) and using it afterwards under negative voltage polarity.     

Chiral capillary electrophoretic separation of amino acids derivatized with 9-fluorenylmethylchloroformate using mixed chiral selectors of beta-cyclodextrin and sodium taurodeoxycholate

Chiral separation of 19 pairs of amino acid (AA) enantiomers derivatized with 9-fluorenylmethylchloroformate (FMOC) was successfully conducted by capillary electrophoresis using the mixture of beta-CD and sodium taurodeoxycholate (STDC) as selectors. Resolution was considerably superior to that obtained by using either beta-CD or STDC alone. After a systematic inspection, a buffer composed of 150 mM borate and 18% v/v isopropanol at pH 8.0, dissolved with 30 mM beta-CD and 30 mM STDC, was adopted and able to generate baseline resolution (>1.50) for 17 pairs of FMOC-AA enantiomers and somewhat lower resolution for arginine (1.36) and alanine (1.18), respectively. Experimental data revealed that the addition of the second selector did not increase the mobility difference between a pair of enantiomers (Delta mu = mu(D) - mu(L) and the number of theoretical plates (N), but decreased the summed apparent mobility of a pair of enantiomers (Sigma mu = mu(D) - mu(L)), which was mainly due to the decrease of the electroosmotic flow. The variation of Sigma mu was thus the major reason responsible for the improvement of chiral resolution in this study. The result demonstrated that not only the intrinsic selectivity of the selectors was the basis of the chiral separation, but also the non-chiral effect of the selectors, the change of the electroosmotic flow, was an important factor in enhancing the enantioseparation resolution. This study could probably help to explain the reasons for resolution improvement in some dual selectors systems, which are not very clear at present.     

Enantiomer separation by capillary electrophoresis using DEAE-dextran and aminoglycosidic antibiotics

Summary Diethylaminoethyl (DEAE) dextran hydrochloride and three kinds of aminoglycosidic antibiotics; fradiomycin sulfate, kanamycin sulfate and streptomycin sulfate, were employed as chiral selectors in capillary electrophoresis, enantiomer separation. These selectors are cationic or basic because of amino functionality and therefore used for enantiomer separation of acidic compounds. To avoid adsorption of the basic or cationic selectors on the capillary inner surface, a coated capillary was employed. Among those tested, enantiomers of binaphthyl compounds and synthetic intermediates of diltiazem analogues were separated. Methanol addition was effective for the improvement of peak shape and resolution.     

Enantioselective analysis of ofloxacin and ornidazole in pharmaceutical formulations by capillary electrophoresis using single chiral selector and computational calculation of their inclusion complexes

A capillary electrophoretic method for the separation of the enantiomers of both ofloxacin and ornidazole is described. Several parameters affecting the separation were studied, including the type and concentration of chiral selector, buffer pH, voltage and temperature. Good chiral separation of the racemic mixtures was achieved in less than 16 min with resolution factors Rs = 5.45 and 6.28 for ofloxacin and ornidazole enantiomers, respectively. Separation was conducted using a bare fused-silica capillary and a background electrolyte (BGE) of 50 mM H₃PO₄-1 M tris solution; pH 1.85; containing 30 mg mL⁻¹ of sulfated-β-cyclodextrin (S-β-CD). The separation was carried out in reversed polarity mode at 25 °C, 18 kV, detection wavelength at 230 nm and using hydrodynamic injection for 15 s. Acceptable validation criteria for selectivity, linearity, precision, and accuracy were studied. The limits of detection (LOD) and limits of quantitation (LOQ) of the enantiomers (ofloxacin enantiomer 1 (OF-E1), ofloxacin enantiomer 2 (OF-E2), ornidazole enantiomer 1 (OR-E1) and ornidazole enantiomer 2 (OR-E2)) were (0.52, 0.46, 0.54, 0.89) and (1.59, 1.40, 3.07, 2.70) μg mL⁻¹, respectively. The proposed method was successfully applied to the assay of enantiomers of both ofloxacin and ornidazole in pharmaceutical formulations. The computational calculations for the enantiomeric inclusion complexes rationalized the reasons for the different migration times between the ofloxacin and ornidazole enantiomers.     

Use of full-column imaging capillary isoelectric focusing for the rapid determination of the operating conditions in the preparative-scale continuous free-flow isoelectric focusing separation of enantiomers

A rapid, simple method is proposed here for the identification of the experimental conditions that lead to satisfactory preparative-scale isoelectric focusing enantiomer separations in continuous free-flow electrophoretic units. The method first calls for the use of a commercially available, full-column imaging capillary electrophoretic system to find the background electrolyte composition that generates the largest pI difference between the bands of the enantiomers. The method then calls for the finding of the minimum residence time that permits full development of the pH gradient across the separation chamber of the continuous free-flow electrophoretic unit by measuring the pH in the sample-free carrier electrolyte fractions collected during these runs. Finally, the quality of the predicted preparative-scale separation is verified by analyzing the enantiomer-containing collected fractions by capillary electrophoresis using a 14-sulfated, single-isomer cyclodextrin as resolving agent. The pI difference values and production rate values observed in this work agree well with the literature values that were obtained by much more time-consuming methods.     

Theoretical models of separation selectivity for charged compounds in micellar electrokinetic chromatography

Equations and theoretical models for MEKC separation selectivity (α(MEKC) ) were established to explain a change in separation and electrophoretic mobility order of fully charged analytes, in which α(MEKC) is related to the dimensionless values of mobility selectivity in CZE (α(CZE)) and retention selectivity (α(k)) in MEKC, and where α(CZE) and α(k) are defined as the ratio of electrophoretic mobility in CZE and the ratio of retention factor (k) in MEKC for two charged analytes, respectively. Using four alkylparabens as test analytes, excellent agreement was found between the observed α(MEKC) and the proposed α(MEKC) models of test analytes in MEKC over a wide range of SDS concentrations and values of k. For example, in comparison with CZE separation of charged analytes, MEKC separation can enhance separation selectivity up to the maximum value when the selectivity ratio (ρ) is greater than 1.0 (ρ=α(k)/α(CZE)), while lower separation selectivity is obtained with ρ<1.0 (α(CZE) >α(k) >1).     

Heptakis(2-O-methyl-3,6-di-O-sulfo)-beta-cyclodextrin: a single isomer, 14-sulfated beta-cyclodextrin for use as a chiral resolving agent in capillary electrophoresis

The first single-isomer, 14-sulfated beta-cyclodextrin, the sodium salt of heptakis(2-O-methyl-3,6-di-O-sulfo)-beta-cyclodextrin (HMdiSu) has been used to separate 24 pharmaceutical weak base enantiomers in pH 2.5 background electrolytes using capillary electrophoresis. For the weakly binding bases, the cationic effective mobilities decreased, approached zero, and then increased again. For the strongly binding bases, the cationic effective mobilities decreased, became anionic at very low concentrations of HMdiSu, passed an anionic mobility maximum, then decreased again as the HMdiSu concentration was increased. Viscosity corrections according to Walden's rule did not eliminate these unexpected effective mobility extrema. The mobility extrema were rationalized by extending the charged resolving agent migration model (CHARM model) to include ionic strength effects.     

Nonaqueous capillary electrophoretic separation of basic enantiomers using heptakis(2,3-dimethyl-6-sulfato)-beta-cyclodextrin.

The enantiomers of 40 basic analytes, mostly pharmaceuticals, were separated by nonaqueous capillary electrophoresis in acidic methanol background electrolytes using the sodium salt of heptakis(2,3-dimethyl-6-sulfato)-beta-cyclodextrin (HDMS-beta-CD). The effective mobilities, separation selectivities, and peak resolution values were determined as a function of the HDMS-beta-CD concentration in the 0-40 mM range and were found to follow the theoretical predictions of the charged resolving agent migration model (CHARM model). Fast, efficient enantiomer separations were achieved for a large number of both very hydrophobic and hydrophilic weak bases.     

Chiral separation of anionic and neutral compounds using a hepta-substituted cationic beta-cyclodextrin as a chiral selector in capillary electrophoresis

Enantiomeric separations of six anionic and two neutral racemates were achieved using a fully substituted heptakis(6-hydroxyethylamino-6-deoxy)-beta-cyclodextrin (beta-CD-EA) as a chiral selector. As beta-CD-EA provides a dynamic coating on the capillary wall, reverse-polarity capillary electrophoresis (CE) configuration is applied for separations of anionic and neutral chiral compounds. Chiral separations of various classes of anionic and neutral enantiomers were found to be highly dependent on pH because the degree of protonation of beta-CD-EA can alter the shape of the CD cavity by charge repulsion, altering complexation, aiding selectivity, and leading to better enantiomeric separation. In general, the chiral resolution of anionic enantiomers was enhanced at higher pH. This suggests that carboxylate or phosphate groups on the analyte may interact with the protonated amine groups of cationic CD. The successful enantioseparation was achieved in a pH range of 6.6-7.8 for all six anionic analytes, in the presence of 10 mM beta-CD-EA.     

Synthesis of a single-isomer sulfated beta-cyclodextrin carrying nonidentical substituents at all of the C2, C3, and C6 positions and its use for the electrophoretic separation of enantiomers in acidic aqueous and methanolic background electrolytes. Part 2: Heptakis(2-O-methyl-6-O-sulfo) cyclomaltoheptaose

The sodium salt of heptakis(2-O-methyl-6-O-sulfo)cyclomaltoheptaose (HMS), the second single-isomer, sulfated beta-CD carrying nonidentical substituents at all of the C2, C3, and C6 positions, has been synthesized, analytically characterized, and used for the capillary electrophoretic separation of the enantiomers of a group of 23 weak base analytes in acidic aqueous and methanolic BGEs. HMS interacted strongly with only about half of the analytes studied. The good separation selectivities and favorable normalized EOF mobilities allowed for rapid, efficient separation of the enantiomers of 19 of the 23 weak base analytes in the aqueous BGEs, often with separation selectivity values complimentary to those obtained with other single-isomer sulfated CDs. HMS did not prove to be as good a resolving agent in acidic methanolic BGEs as its counterpart, heptakis(2-O-methyl-3-O-acetyl-6-O-sulfo)cyclomaltoheptaose.     

Simultaneous separation of anionic and cationic proteins by capillary electrophoresis using high concentration of poly(diallyldimethylammonium chloride) as an additive

The simultaneous separation of anionic and cationic proteins has been achieved by addition of high concentration of poly(diallyldimethylammonium chloride) (PDDAC) in capillary electrophoresis. A capillary was filled with PDDAC so that it would act as ion-pair reagents in the separation of anionic proteins. On the other hand, the PDDAC can also be used as coating additives for the analysis of cationic proteins. Increasing the concentration of PDDAC in the separation buffer had the ability to improve the separation efficiency, change the electrophoretic mobility, and alter the separation selectivity; however, this was not true in the case of analyzing proteins by using the PDDAC larger than 1.6%. By both using a buffer containing 1.6% PDDAC and applying pH-stepwise techniques, 13 proteins with a wide range of pI (4.7-11.1) and molecular masses (6.5-198.0 kDa) could be separated within 30 min in a single run. In addition to this separation, we observed not only more peaks from alpha-chymotrypsinogen A and aprotinin but also the bovine serum albumin (BSA) dimer and trimer. With the 50 nL protein injection sample, the limits of detections at signal-to-noise of 3 for proteins are in the range of 0.07-0.79 microM. Except for BSA, the relative standard derivation values of migration time and peak height for all proteins were <1.3 and <6.9%, respectively. We suggested that this proposed method is a promising approach for clinical diagnosis and proteomics applications.     

Synthesis of mono-6-deoxy-6-N,N,N',N',N'-pentamethylethylenediammonio-cyclomaltoheptaose, a single-isomer, monosubstituted, permanently dicationic beta-CD and its use for enantiomer separations by CE

The dichloride salt of mono-6-deoxy-6-N,N,N',N',N'-pentamethylethylenediammonio-cyclomaltoheptaose (PEMEDA-BCD), the first single-isomer, monosubstituted, permanently dicationic beta-CD has been synthesized, analytically characterized, and used for the capillary electrophoretic separation of the enantiomers of a group of analytes in acidic and basic BGEs. When the concentration of PEMEDA-BCD was changed in the BGEs, the resulting effective mobilities of the analytes and the respective separation selectivities followed the predictions of the ionic strength-corrected charged resolving agent migration model. Good separation selectivities and favorable normalized EOF mobilities allowed for the rapid, efficient separation of the enantiomers of anionic, weak acid and nonionic analytes in the low- and/or high-pH BGEs.