Cross-linking of cationic block copolymer micelles by silica deposition

Diblock copolymer micelles comprising cationic poly(2-(dimethylamino)ethyl methacrylate) (PDMA) coronas and hydrophobic poly(2-(diisopropylamino)ethyl methacrylate) (PDPA) cores are used as nanosized templates for the deposition of silica from aqueous solution at pH 7.2 and 20 degrees C. Both noncross-linked and shell cross-linked (SCL) micelles can be coated with silica without loss of colloid stability. Under optimized conditions, the silica deposition is confined to the partially quaternized cationic PDMA chains, leading to hybrid copolymer-silica particles of around 35 nm diameter with well-defined core-shell morphologies. 1H NMR studies confirmed that the PDPA cores of these copolymer-silica particles became protonated at low pH and deprotonated at high pH, which suggests possible encapsulation and controlled release applications. Moreover, in situ silica deposition effectively stabilizes the PDPA-PDMA micelles, which remain intact on lowering the solution pH (whereas the original noncross-linked PDPA-PDMA micelles dissociate in acidic solution). This suggests a convenient route to silica-stabilized SCL micelles under mild conditions.     

Thin films of bicontinuous cubic mesostructured silica templated by a nonionic surfactant

Thin films ofbicontinuous cubic mesostructured silica were formed using the nonionic poly(oxyethylene)-alkyl ether surfactant Brij-56 as a structure-directing agent. The synthesis conditions were chosen such that the estimated volume fraction of surfactant in the silica/surfactant films corresponded approximately to the composition at which the bicontinuous cubic phase occurs in the water/surfactant phase diagram. Small-angle X-ray scattering and transmission electron microscopy measurements reveal that the cubic phase corresponds to the Ia3(-)d double-gyroid structure, with some distortion due to anisotropic film shrinkage. The cubic structure grows as faceted domains that are well-oriented with respect to the substrate and often occur in coexistence with a lamellar phase. By adjusting the temperature at which the films are aged, it is possible to create films with 2D hexagonal, cubic, or lamellar structures at a single composition.     

S-layer templated bioinspired synthesis of silica

The current understanding of the molecular mechanisms involved in the bioinspired formation of silica structures laid foundation for investigating the potential of the S-layer protein SbpA from Lysinibacillus sphaericus CCM 2177 as catalyst, template and scaffold for the generation of novel silica architectures. SbpA reassembles into monomolecular lattices with square (p4) lattice symmetry and a lattice constant of 13.1 nm. Silica layers on the S-layer lattice were formed using tetramethoxysilane (TMOS) and visualized by transmission electron microscopy. In situ quartz crystal microbalance with dissipation monitoring (QCM-D) measurements showed the adsorption of silica in dependence on the presence of phosphate in the silicate solution and on the preceding chemical modification of the S-layer. An increased amount of precipitated silica could be observed when K₂HPO₄/KH₂PO₄ was present in the solution (pH 7.2). Further on, independent of the presence of phosphate the silica deposition was higher on S-layer lattices upon activation of their carboxyl groups with 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride (EDC) compared to native S-layers or EDC treated S-layers when the activated carboxyl groups were blocked with ethylene diamine (EDA). Fourier transform infrared attenuated total reflectance (FTIR-ATR) spectroscopy revealed the formation of an amorphous silica gel (SiO₂)_x·yH₂O on the S-layer. The silica surface concentrations on the S-layer was 4 × 10^?9 to 2 × 10^?8 mol cm^?2 depending on the modification of the protein layer and corresponded to 4–21 monolayers of SiO₂.     

以钴-哒嗪阳离子为模板构筑的多酸基有机-无机杂化材料

利用水热方法合成了一种Keggin型多酸基有机无机杂化材料,化学式为(Hpydz)Na[Co(pydz)_4(H_2O)_2][SiW_(12)O_(40)]·3H_2O(pydz=pyridazine).单晶X-射线研究表明,在该化合物中,Keggin型多阴离子与钠离子连接构筑成三维孔状结构,其中钴-哒嗪阳离子有机基团作为客体分子,通过静电相互作用存在于三维孔道结构中,构筑成有机-无机杂化材料.该化合物属于单斜晶系,空间群为C_2/c,晶胞参数a=1.937 7(2)nm,b=1.678 8(2)nm,c=1.768 0(2)nm,α=90°,β=98.612(3)°,γ=90°,V=5.686 51nm~3.     

Fabrication and photoluminescent properties of ZnO/mesoporous silica composites templated by a chelating surfactant

A novel anionic surfactant-templated synthesis of ZnO/mesoporous silica nanocomposites has been carried out by using N-hexadecylethylenediamine triacetate (HED3A), a triprotic surfactant, as the structure-directing agent. The chelating template can capture zinc ions in solution and then direct the mesophase formation, enabling an amount of zinc oxide to be embedded in the porous silica matrix during calcination. With variation of the molar ratio of Zn(2+) to HED3A in the template, a series of composites with different doping amounts were obtained after the removal of organic components. The variation of the zinc ion concentration in the initial template solution induces an evolution of the silica mesophase, presumably due to the change in electronegativity of the HED3A headgroup caused by the chelating effect. Spectroscopic studies show a strong host-guest interaction between the silica pore walls and ultrafine ZnO nanoparticles. The photoluminescence properties of the resulting composites exhibit a size-dependent light emission and quantum-confinement effect of ZnO, accompanied by an infrequent violet emission originating from the ZnO-SiO(2) interface.     

Mesoporous single-crystal Co3O4 templated by cage-containing mesoporous silica

Mesoporous single-crystal Co(3)O(4) was obtained using cage-containing mesoporous silicas, FDU-12 and SBA-16, as templates and characterised by XRD, HRTEM and nitrogen adsorption-desorption while SQUID magnetometry was used to probe the magnetic character.     

Biomimetic dual templating of silica by polysaccharide/protein assemblies

The control of silica growth by living organisms such as diatoms is known to involve the templating effect of several biomolecules working concomitantly. However, until now, biomimetic studies involving model molecules have mainly been performed with single templates. We show here that the addition of two biopolymers, gelatin and alginic acid, to silicate solutions allows the formation of complex structures resulting from the combined templating effect of both components at different scales. Gelatin is able to activate silica formation resulting in hybrid aggregates at the nanoscale. Alginic acid does not interfere with silica condensation but is able to control silica morphology through the assembly of these gelatin-silica aggregates at the microscale. For all materials, calcination up to 700 degrees C degrades the polymer component of the hybrid material and opens macroporosity in the silica network. In parallel, the high thermal stability of gelatin allows a good preservation of initial silica nanoparticle size upon heating whereas a coarsening process is observed in the sole presence of alginate. These results correlate well with previous models of biosilicification and suggest that the use of multiple templates is a suitable approach to elaborate more complex silica architectures.     

Preparation of ordered mesoporous SiC from preceramic polymer templated by nanoporous silica

Highly ordered mesoporous SiC materials were prepared by infiltrating viscous liquid preceramic polymer, allylhydridopolycarbosilane, into two types of surface modified nanoporous silica templates: mesoporous silica SBA-15 and mesocellular siliceous foam. The silica templates were subsequently etched off after pyrolysis at 1000 degrees C under nitrogen atmosphere with the resultant formation of ordered mesoporous structures. The mesoporous SiC materials, synthesized from both types of templates possessed high Brunauer-Emmett-Teller (BET) surface areas in the range of 250-260 m(2)/g with pore sizes of 3.4-3.6 nm. The ordered structures of mesoporous SiC were exact inverse replicas of their respective silica templates, as characterized by small angle X-ray diffraction (XRD), transmission electron microscope (TEM) images, and the adsorption-desorption isotherm of nitrogen.     

Plugged hexagonal templated silica: a unique micro- and mesoporous composite material with internal silica nanocapsules

We describe in this paper the development of plugged hexagonal templated silicas (PHTS) which are hexagonally ordered materials, with internal microporous silica nanocapsules; they have a combined micro- and mesoporosity and a tuneable amount of both open and encapsulated mesopores and are much more stable than other tested micellar templated structures.     

Nanocasting of carbon nanotubes: in-situ graphitization of a low-cost mesostructured silica templated by non-ionic surfactant micelles

The in-situ graphitization of an as-made, large pore silica mesostructure templated by nonionic Pluronic 123 surfactant micelles provides a low cost pathway to the nanocasting of linear carbon nanotubes.     

Synthesis of cationic bacterial cellulose using a templated metal phenolic network for antibacterial applications

Cellulose - Bacterial cellulose (BC) has been an attractive bio-based material for biomedical applications due to its biocompatibility, non-toxicity, ultrafine nanofibril network, robust mechanical...     

Nanocomposite silica/polyamine films prepared by a reactive layer-by-layer deposition

Composite material nanofilms of controlled thickness constituted by ceramics and polymers find more and more applications to improve the properties and functionalities of material surfaces. In this paper we present a new way to deposit such composite coatings by alternated contacts of a surface with a polyamine solution (either poly(allylamine), poly(ethyleneimine), poly-l-lysine, or poly(diallydimethylammonium)chloride and silicic acid. The experiments are mainly realized by spraying of solutions onto the surface. The polyamines deposited in the first spraying step catalyze silica formation upon further spraying of a silicic acid-containing solution. The film thickness increases linearly with the number of deposition steps, the thickness increment being of the order of a few nanometers per silicic acid/polyamine layer. Infrared spectroscopy in the total attenuated reflection mode reveals spectra that are close to those of pure silica particles. The film morphology is further investigated by means of atomic force microscopy and environmental scanning electron microscopy. This reactive layer-by-layer deposition constitutes a new way to build, in an easy way, nanocomposite coatings with precise control of their thickness.     

Biomimetic growth of silica tubes in confined media

Polymer membranes were used as biomimetic environments to study the effect of confinement on silica formation. Within membrane pores, silica tubes were formed, consisting of a dense silica shell incorporating nanoparticle aggregates. The shell structure does not depend on the membrane pore size, suggesting that its formation proceeds via interfacial interactions with the pore surface. In contrast, the size of primary nanoparticles within core aggregates is influenced by pore dimensions, indicating an effect of confinement on the diffusion-limited growth of silica. A parallel can be drawn with reported roles of confinement in biomineralization processes, providing a basis for future developments in biosilicification mimetic approaches and biofunctional nanomaterials design.     

Peering into the self-assembly of surfactant templated thin-film silica mesophases

It is now recognized that self-assembly is a powerful synthetic approach to the fabrication of nanostructures with feature sizes smaller than achievable with state of the art lithography and with a complexity approaching that of biological systems. For example, recent research has shown that silica/surfactant self-assembly combined with evaporation (so-called evaporation induced self-assembly EISA) can direct the formation of porous and composite thin-film mesostructures characterized by precise periodic arrangements of inorganic and organic constituents on the 1-50-nm scale. Despite the potential utility of these films for a diverse range of applications such as sensors, membranes, catalysts, waveguides, lasers, nano-fluidic systems, and low dielectric constant (so-called low k) insulators, the mechanism of EISA is not yet completely understood. Here, using time-resolved grazing incidence small-angle X-ray scattering (GISAXS) combined with gravimetric analysis and infrared spectroscopy, we structurally and compositionally characterize in situ the evaporation induced self-assembly of a homogeneous silica/surfactant/solvent solution into a highly ordered surfactant-templated mesostructure. Using CTAB (cetyltrimethylammonium bromide) as the structure-directing surfactant, a two-dimensional (2-D) hexagonal thin-film mesophase (p6mm) with cylinder axes oriented parallel to the substrate surface forms from an incipient lamellar mesophase through a correlated micellar intermediate. Comparison with the corresponding CTAB/water/alcohol system (prepared without silica) shows that, for acidic conditions in which the siloxane condensation rate is minimized, the hydrophilic and nonvolatile silicic acid components replace water maintaining a fluidlike state that avoids kinetic barriers to self-assembly.     

Design and synthesis of novel mesostructured metal-organic frameworks templated by cationic surfactants via cooperative self-organization

A novel design strategy to synthesize highly ordered hexagonally mesostructured metal-organic framework materials was successfully explored, which means the realization of directly cooperative self-assembly of metal ions, bridging ligands and surfactants in an aqueous system.