TiO2花状纳米结构的制备及光催化性能

TiO2 nanostructures were fabricated by a reaction of Ti foils in H2O2 solution at mild temperature. Porous TiO2 nanostructures, well-adhered to Ti foil surfaces, were formed at 80 ±C in 10 min, and then flower- like and rod nanostructures formed in succession after a longer reaction time. Samples prepared at 80 ±C for 4 h are amorphous, and anatase-dominated crystal phase emerged in the sample prepared for as long as 10 h. Almost pure anatase phase were obtained in TiO2 nanostructures by annealing the samples at a temperature of 300 ±C. Photocatalysis of the TiO2 nanostructures was characterized by the degradation of RhB dye molecules in an aqueous solution exposed to ultraviolet light. Results show a 7 cm2 annealed TiO2 flower-like nanostructure having the degradation rate of RhB as fast as 29.8 times that of the dye solution exposed to ultraviolet light alone.     

Hierarchical TiO2 nanospheres with dominant {001} facets: facile synthesis, growth mechanism, and photocatalytic activity

Hierarchical TiO(2) nanospheres with controlled surface morphologies and dominant {001} facets were directly synthesized from Ti powder by a facile, one-pot, hydrothermal method. The obtained hierarchical TiO(2) nanospheres have a uniform size of 400-500?nm and remarkable 78?% fraction of {001} facets. The influence of the reaction temperature, amount of HF, and reaction time on the morphology and the exposed facets was systematically studied. A possible growth mechanism speculates that Ti powder first dissolves in HF solution, and then flowerlike TiO(2) nanostructures are formed by assembly of TiO(2) nanocrystals. Because of the high concentration of HF in the early stage, these TiO(2) nanostructures were etched, and hollow structures formed on the surface. After the F(-) ions were effectively absorbed on the crystal surfaces, {001} facets appear and grow steadily. At the same time, the {101} facets also grow and meet the {101} facets from adjacent truncated tetragonal pyramids, causing coalescence of these facets and formation of nanospheres with dominant {001} facets. With further extension of the reaction time, single-crystal {001} facets of hierarchical TiO(2) nanospheres are dissolved and TiO(2) nanospheres with dominant {101} facets are obtained. The photocatalytic activities of the hierarchical TiO(2) nanospheres were evaluated and found to be closely related to the exposed {001} facets. Owing to the special hierarchical architecture and high percentage of exposed {001} facets, the TiO(2) nanospheres exhibit much enhanced photocatalytic efficiency (almost fourfold) compared to P25 TiO(2) as a benchmark material. This study provides new insight into crystal-facet engineering of anatase TiO(2) nanostructures with high percentage of {001} facets as well as opportunities for controllable synthesis of 3D hierarchical nanostructures.     

WO3/TiO2 复合纤维的制备及储能光催化性能

以钛酸正丁酯为前驱体, 采用静电纺丝技术制得了纯锐钛矿TiO2纤维, 并以其为基质, 通过水热法制备了具有异质结构的WO3/TiO2复合纤维. 利用X射线衍射仪(XRD)、 扫描电子显微镜(SEM)、 能量色散光谱仪(EDS)、 透射电子显微镜(TEM)和高分辨透射电子显微镜(HRTEM)等对样品的结构和形貌进行了表征. 以罗丹明B的脱色降解为模型反应, 考察了样品的光催化性能和储能光催化性能. 结果表明, 花状WO3微球包裹在TiO2纤维上, 得到了具有异质结构的WO3/TiO2复合纤维光催化剂. WO3与TiO2复合有利于光生载流子的输运和分离, 增强了体系的量子效率, 提高了光催化活性. WO3/TiO2 复合纤维经光照处理后, 在黑暗条件下显示出储能光催化特性.     

氟掺杂TiO2纳米管的可见光催化活性及第一性原理计算

作为光催化技术的核心, 提高TiO₂的光催化活性和对可见光的利用率是当前光催化研究中最重要的研究课题. 为了提高TiO₂纳米管的可见光催化活性, 采用化学气相沉积法对TiO₂纳米管进行了氟掺杂. 扫描电子显微镜(SEM)结果表明退火温度对于TiO₂纳米管的形貌完整性有较大影响, 当样品在550和700 °C下退火, 氟掺杂TiO₂纳米管结构受损; X射线衍射(XRD)分析表明氟掺杂对TiO₂由锐钛矿相转化为金红石相有阻碍作用; X射线光电子能谱(XPS)测试表明化学气相沉积能有效地对TiO₂纳米管进行非金属掺杂, 且该方法安全、操作简单. 氟掺杂TiO₂纳米管对甲基橙有较高的可见光催化降解活性. 第一性原理计算结果表明氟掺杂对TiO₂带隙无显著影响, 费米能级附近的F 2p轨道电子位于价带底部, 与O 2p交联作用较小, 因此对TiO₂光吸收带边影响不大. 氟掺杂能促进表面氧空穴的产生, 增加表面酸度与Ti³⁺, 有利于减少电子-空穴复合率, 从而提高其光催化活性.     

F离子掺杂TiO2的性能研究

以NH₄F为掺杂剂,采用溶胶-凝胶法制备F离子掺杂型TiO₂光催化剂,对其进行XRD、XPS和PL表征,结果表明,F离子掺杂TiO₂由于Ti-F配位体的形成而能抑制金红石相的生成,同时F离子掺杂能增加TiO₂表面缺陷浓度并降低Ti_2P键的结合能,另外,由于F离子能取代Ti-OH配位体而降低了表面羟基氧浓度.光催化研究结果表明,F离子掺杂提高了TiO₂光催化活性近1.5倍.     

Hydrothermal synthesis and structure evolution of hierarchical cobalt sulfide nanostructures

Hierarchical and well-defined cobalt sulfide with flower-like, cube-like, ball-like, and surface hollowed-out nanostructures were successfully prepared by a facile one-pot hydrothermal synthesis approach, employing Co(NO(3))(2)·6H(2)O as a cobalt precursor and thiourea as a sulfur source. The morphologies of these structures can be easily controlled by simply adjusting the molar ratio of reactants and solvents, reaction time, reaction temperature, and ligand types. Thiourea plays two important roles in the growth process of CoS nanostructures. First, it is decomposed to produce S(2-) for the final formation of CoS. On the other hand, it serves as a structure-directing agent to control the crystalline growth of CoS. The electrochemical capacitance performances of the CoS nanostructures were studied, and the flower-like CoS nanostructures show the best charge-discharge performance among all CoS products with the highest specific capacitance values of 389 F g(-1) at current density of 5 mA cm(-2), and 277 F g(-1) at higher current density of 50 mA cm(-2).     

Sonochemical synthesis and characterization of CuInS2 nanostructures using new sulfur precursor and their application as photocatalyst for degradation of organic pollutants under simulated sunlight

In this research, we investigated the photocatalytic activity of CuInS₂ nanoparticles in visible light during the decomposition of three toxic dyes (Eriochrome Black T, Rhodamine B, and Erythrosine). The CuInS₂ nanostructures were synthesized by a rapid and simple sonochemical method using dithiooxamide as a sulfur reagent and various capping agents, including SDS, CTAB, and PVP, were applied to achieve a pure structure with fine morphology. The flower-like structure was observed through FESEM images, implying different capping agents and fabrication had a considerable influence on the morphology of samples. The suitable bandgap of CuInS₂ (1.53 eV) was obtained from DRS analysis and resulted in higher photodegradation efficiency. The fabricated CuInS₂ revealed better photodegradation efficiency (74.8%) to the anionic dyes than cationic dye. A possible photodegradation mechanism was suggested based on scavenger tests of active species.     

Nonaqueous seeded growth of flower-like mixed-phase titania nanostructures for photocatalytic applications

A nonaqueous seeded-grown synthesis of three-dimensional TiO₂ nanostructures in the benzyl alcohol reaction system was reported. The synthesis was simple, high-yield, and requires no structural directing or capping agents. It could be largely accelerated by applying microwave heating. The TiO₂ nanostructures had a unique flower-like morphology and high surface area. Furthermore, the structural analyses suggested that the nanostructures had a non-uniform distribution of crystalline phases, with the inner part rich in anatase and the outer part rich in rutile. After heat treatments, the mixed-phase TiO₂ nanostructures exhibited high photocatalytic activities for the photodegradation of methylene blue as compared to Degussa P25. The high photoactivities may be associated with the high surface area and the synergistic effect resulting from the anisotropic mixed-phase nanostructures. The results demonstrate the uniqueness of the nonaqueous seeded growth and the potential of the TiO₂ nanostructures for practical applications.     

Liquid phase deposition of hemoglobin/SDS/TiO2 hybrid film preserving photoelectrochemical activity

This work demonstrates that liquid phase deposition (LPD) technique provides a novel approach to the immobilization of hemoglobin (Hb) in TiO(2) film for studying the direct electron transfer of Hb. Using the LPD process, a hybrid film composed of Hb, TiO(2) and sodium dodecylsulfonate (SDS) is successfully prepared on the electrode surface. The surface morphology of as-deposited Hb/SDS/TiO(2) film shows a flower-like structure. The cyclic voltammetric measurement indicates that the LPD hybrid film facilitates the electron transfer of Hb, which yields a pair of redox peaks prior to the characteristic voltammetric peaks of TiO(2). Due to the electrocatalytic activity of Hb towards H(2)O(2), the Hb/SDS/TiO(2) hybrid LPD film can be utilized as an H(2)O(2) sensor, showing a sensitive response linearly proportional to the concentration of H(2)O(2) in the range of 5.0×10(-7)-4.0×10(-5) mol/L. At the same time, the Hb/SDS/TiO(2) hybrid film preserves the photoelectrochemical activity of TiO(2). The photovoltaic effect on the electrochemical behavior of Hb/SDS/TiO(2) film is observed after long-time UV irradiation on the film, which could improve the calibration sensitivity for H(2)O(2).     

Synthesis of hierarchical nanoporous F-doped TiO2 spheres with visible light photocatalytic activity

Hierarchical porous F-doped TiO2 microspheres exhibiting high visible light photocatalytic activity have been fabricated by a one-step low-temperature hydrothermal approach without using any templates.     

基于GM（1,1）的TiO2光催化降解苯胺的动力学研究

采用溶液浸渍法制备TiO2并将其担载到瓷砖上,通过添加过渡金属离子和H2O2,来考察对TiO2光催化降解苯胺的影响,其动力学过程利用GM（1,1）模型进行模拟.结果表明,添加Cu2＋、Mn2＋和Co2＋均能提高TiO2催化活性,且提高程度为Cu2＋〉Mn2＋〉Co2＋;掺杂Ni2＋反而降低其活性.H2O2能提高瓷砖固载...     

Synthesis of TiO2 nanocoral structures in ever-changing aqueous reaction systems

A far-from-equilibrium strategy is developed to synthesize coral-like nanostructures of TiO(2) on a variety of surfaces. TiO(2) nanocoral structures consist of anatase base film and rutile nanowire layers, and they are continuously formed on substrates immersed in aqueous TiOSO(4)-H(2)O(2). The sequential deposition of TiO(2) starts with hydrolysis and condensation reactions of titanium peroxocomplexes in the aqueous phase, resulting in deposition of amorphous film. The film serves as adhesive interface on which succeeding growth of rutile nanowires to occur. This initial deposition reaction is accompanied by shift in pH of the reaction media, which is favorable condition for the growth of rutile nanocrystals. During the growth of rutile nanocoral layers, the amorphous base films are transformed to anatase phase. These sequential deposition reactions occur at temperatures as low as 80 °C, and the mild synthetic condition allows the use of a wide range of substrates such as ITO (indium tin oxide), glass, and even organic polymer films. The thickness of nanocoral layer is controllable by repeating the growth reaction of rutile nanocorals. TiO(2) nanocorals show photocatalytic activity as demonstrated by site-specific reduction of Ag(I) ions, which proceeds preferentially on the rutile nanowire layer. The rutile nanowire layer also shows photocatalytic decomposition of acetaldehyde, which is promoted upon increase of the thickness of the nanowire layer. The use of temporally transforming reaction media allows the formation of biphasic TiO(2) nanocoral structures, and the concept of nonequilibrium synthetic approach would be widely applicable to developing structurally graded inorganic nanointerfaces.     

溶胶-凝胶法制备TiO2/玻璃膜和光催化降解玫瑰红B的研究

溶胶-凝胶法制备TiO2/玻璃膜和光催化降解玫瑰红B的研究     

Enhancement of the ETS-10 titanosilicate activity in the shape-selective photocatalytic degradation of large aromatic molecules by controlled defect production

In recent times, it has been shown that the microporous ETS-10 titanosilicate can be used as a shape-selective photocatalyst for the decomposition of aromatic molecules (Chem. Commun. 2001, 2131). Its actual use on practical grounds is however discouraged by its too low activity, when compared with that of TiO(2) photocatalysts. In the present work, we show how an ad hoc mild treatment with HF enhances the activity of ETS-10 toward the photodegradation of large aromatic molecules that are unable to penetrate inside the zeolitic pores, such as 2,5-dichlorophenol, 2,4,5-trichlorophenol, 1,3,5-trihydroxybenzene, and 2,3-dihydroxynaphthalene (DHN). The photoactivity of the acid-treated materials is comparable or even greater than that of the nonselective TiO(2) catalyst. Moreover, the enhancement of the photoactivity is accompanied by a remarkable parallel increase of the shape selectivity, particularly toward DHN (k(DHN)/k(P) = 127, where P = phenol). A complete characterization (by means of X-ray diffraction, scanning electron microscopy, transmission electron microscopy, ultraviolet-visible spectroscopy, and X-ray aborption spectroscopy techniques) of a set of ETS-10 samples which have undergone a progressively severe HF treatment allows us to propose an explanation of the photocatalytic activity and selectivity of the modified materials.     

氟掺杂纳米 TiO2 薄膜的低温制备及其光催化性能

 以氟化铵为氟源, 采用水热法制得氟掺杂 TiO2 (FTO) 溶胶, 并通过浸渍提拉法在低温下制备了 FTO 薄膜. 其中在 120 oC 下水热处理 10 h 所得的 TiO2 溶胶制备的薄膜均匀透明, 具有较高的光催化活性. 氟掺杂后的 TiO2 晶粒尺寸并未发生明显变化, 但薄膜的光催化活性显著升高. F/Ti 摩尔比为 0.01 时, FTO 薄膜的光催化活性最高, 比 TiO2 薄膜的活性升高了 23%. X 射线光电子能谱结果表明, 氟掺杂 TiO2 中的氟离子存在晶格取代掺杂和表面化学吸附两种形式. 这两种氟离子的共同作用是 FTO 薄膜光催化活性升高的主要原因.     

TiO2/ACF的制备及光催化降解四氯乙烯性能

以钛酸四丁酯为前驱物,活性炭纤维(ACF)为载体,蔗糖为胶粘剂,采用真空吸附水解的方法制得了TiO₂/ACF催化剂.采用BET、XRD、SEM等手段对其物理化学特性进行表征,以四氯乙烯光降解反应为探针反应,考察了TiO₂/ACF催化剂的光催化降解性能.实验结果表明,采用真空吸附水解法可以将TiO₂很好地负载到活性炭纤维表面上.通过优化条件制备的TiO₂/ACF催化剂在光照2h条件下,可以将水中溶解量的四氯乙烯降解90%以上.催化剂可以多次循环使用,光催化反应活性不变.     

Evaluation of titanium dioxide as a pharmaceutical excipient for preformulation of a photo-labile drug: effect of physicochemical properties on the photostability of solid-state nisoldipine

To characterize the photocatalytic activity of TiO2 via solid-state reaction, the relationship between the physicochemical properties and photocatalytic activity of TiO2 was investigated and estimated from the results of photodegradation of nisoldipine. The photodegradation of nisoldipine was significantly enhanced by addition of TiO2. Two degradation products, nitroso-phenylpyridine derivative and nitro-phenylpyridine derivative, were formed. The degree of photocatalytic activity of TiO2 was quite different between the various types of TiO2 investigated, even when the crystalline phase was the same. As a result of the investigations into the relationship between the photocatalytic activity and physicochemical properties of TiO2, it was found that for the rutile form the photocatalytic activity has good correlation with specific surface area of TiO2, but poor correlation with water loss on drying of TiO2. However, for the anatase form, the photocatalytic activity has good correlation with water loss on drying of TiO2, but poor correlation with specific surface area. Moreover, it was found that the crystallinity of TiO2 has a moderate correlation with the photocatalytic activity of both crystal forms of TiO2. These results suggest that a degree of photocatalytic activity of TiO2 depends on the various physicochemical properties of each type of TiO2 investigated.     

Rational design of 3D dendritic TiO2 nanostructures with favorable architectures

Controlling the morphology and size of titanium dioxide (TiO(2)) nanostructures is crucial to obtain superior photocatalytic, photovoltaic, and electrochemical properties. However, the synthetic techniques for preparing such structures, especially those with complex configurations, still remain a challenge because of the rapid hydrolysis of Ti-containing polymer precursors in aqueous solution. Herein, we report a completely novel approach-three-dimensional (3D) TiO(2) nanostructures with favorable dendritic architectures-through a simple hydrothermal synthesis. The size of the 3D TiO(2) dendrites and the morphology of the constituent nano-units, in the form of nanorods, nanoribbons, and nanowires, are controlled by adjusting the precursor hydrolysis rate and the surfactant aggregation. These novel configurations of TiO(2) nanostructures possess higher surface area and superior electrochemical properties compared to nanoparticles with smooth surfaces. Our findings provide an effective solution for the synthesis of complex TiO(2) nano-architectures, which can pave the way to further improve the energy storage and energy conversion efficiency of TiO(2)-based devices.     

Hydrothermal fabrication of quasi-one-dimensional single-crystalline anatase TiO2 nanostructures on FTO glass and their applications in dye-sensitized solar cells

One-dimensional and quasi-one-dimensional semiconductor nanostructures are desirable for dye-sensitized solar cells (DSSCs), since they can provide direct pathways for the rapid collection of photogenerated electrons, which could improve the photovoltaic performance of the device. Quasi-1D single-crystalline anatase TiO(2) nanostructures have been successfully prepared on transparent, conductive fluorine-doped tin oxide (FTO) glass with a growth direction of [101] through a facile hydrothermal approach. The influences of the initial titanium n-butoxide (TBT) concentration, hydrothermal reaction temperature, and time on the length of quasi-1D anatase TiO(2) nanostructures and on the photovoltaic performance of DSSCs have been investigated in detail. A power conversion efficiency of 5.81% has been obtained based on the prepared TiO(2) nanostructure photoelectrode 6.7 μm thick and commercial N719 dye, with a short-circuit current density of 13.3 mA cm(-2) , an open-circuit voltage of 810 mV, and a fill factor of 0.54.     

Heterogeneous photocatalysis of methylene blue over titanate nanotubes: effect of adsorption

Titanate nanotubes were synthesized with hydrothermal reaction using TiO(2) and NaOH as the precursors and subsequent calcination at 400°C for 2h. The products were characterized with SEM and XRD. Adsorption and photocatalysis of methylene blue over titanate nanotubes and TiO(2) were investigated. The results indicated that titanate nanotubes exhibited a better photocatalytic degradation of methylene blue in a simultaneous adsorption and photodegradation system than that in equilibrium adsorption followed by a photodegradation system, whereas TiO(2) showed no significant differences in photocatalytic activity in the two systems. The methylene blue overall removal efficiency over TNTs in the first system even exceeded that over TiO(2). The different catalytic performances of titanate nanotubes in the two systems were tentatively attributed to different effects of adsorption of methylene blue, i.e., the promoting effect in the former and the inhibition effect in the latter. Decantation experiments showed that the titanate nanotube photocatalyst could be easily separated from the reaction medium by sedimentation. Thus titanate nanotubes with high sedimentation rates and concurrent adsorption represent a new catalyst system with a strong potential for commercial applications.