Crystalline structure of developing cotton fibers

The crystalline structure of dried cotton fibers at varying development stages has been investigated using wide angle x-ray diffraction (WAXS) techniques. The cellulose I crystalline structure has been confirmed on dried SJ-2 Acala cotton fibers collected at varying developmental stages and at maturity. The cellulose I crystalline structure is clearly evident at the early developmental stage of 21 days postanthesis (dpa). The crystal system remains unchanged during the cotton fiber biosynthesis and at maturity. The degree of crystallinity and crystallite dimensions in the cotton fibers increase with cell development. The most significant increments are observed between 21 and 34 dpa (i.e., during the first half of the secondary wall thickening process). The unit cell sizes slightly decrease and thus the crystal density increases with fiber development. The alignment of the glucosidic rings in respect to the 002 planes improves with fiber cell development. © 1996 John Wiley & Sons, Inc.     

Changes in sugar composition and cellulose content during the secondary cell wall biogenesis in cotton fibers

Two cotton cultivars TX19 and TX55 (Gossypium hirsutum L. cv.) were planted in the greenhouse and fibers were harvested at different stages of development. The percentage of sugars present on the fibers was determined by High Performance Liquid Chromatography and the cellulose content was determined using the anthrone method. The percentage of sugars (sucrose, glucose, fructose, and galacturonic acid) showed statistically significant changes during fiber development. The decrease in the percentages of these sugars as the secondary cell wall develops was associated with an increase in the cellulose content. It is important to point out that these analyses were done on intact fibers, no cell wall extractions and purifications were performed.     

Cool temperature hinders flux from glucose to sucrose during cellulose synthesis in secondary wall stage cotton fibers

Current knowledge about the integration of cellulose synthesis into cellular carbon metabolism and the cool temperature sensitivity of cellulose synthesis is reviewed briefly. Roles for sucrose synthase (to channel UDP-glucose to the cellulose synthase) and sucrose phosphate synthase (to recycle the fructose released by sucrose synthase to more sucrose) in secondary wall cellulose synthesis are described. Data are presented that implicate sucrose synthesis within cotton fibers as a particularly cool temperature-sensitive step in the partitioning of carbon to cellulose. Sugar metabolism during fiber secondary wall deposition was analyzed in in vitro cultures of ovules from two cultivars of Gossypium hirsutum L. (cv. Acala SJ-1 and cv. Paymaster HS 200), which had different levels of cool temperature sensitivity. The sizes of the sucrose, glucose, and fructose pools within fibers at 4 and 7 h after a temperature shift to 15 or 34 °C did not change in either cultivar. Feeding exogenous U-¹⁴C-glucose in pulse and pulse/chase experiments showed that uptake of glucose and transport through the ovule into fibers occurred at the same rate at 34 and 15 °C. In contrast, the flux from glucose to sucrose within fibers was greatly hindered at 15 °C in both cultivars. Since sucrose is the preferred donor of UDP-Glc to the cellulose synthase during secondary wall deposition, this sensitivity in sucrose synthesis is likely to at least partially explain the cool temperature sensitivity of cotton fiber cellulose synthesis that is observed in the field.     

Fourier transform infrared spectroscopic approach to the study of the secondary cell wall development in cotton fiber

Cotton fiber maturity is a major yield component and an important fiber quality trait that is directly linked to the quantity of cellulose deposited during the secondary cell wall (SCW) biogenesis. Cotton fiber development consists of five major overlapping stages: differentiation, initiation, polar elongation, secondary cell wall development, and maturation. The transition period between 16 and 21 dpa (days post anthesis) is regarded to represent a major developmental stage between the primary cell wall and the SCW. Fourier Transform Infrared spectroscopy was used to investigate the structural changes that occur during the different developmental stages. The IR spectra of fibers harvested at different stages of development (10, 14, 17, 18, 19, 20, 21, 24, 27, 30, 36, 46, and 56 dpa) show the presence of vibrations located at 1,733 cm⁻¹ (C=O stretching originating from esters or amides) and 1,534 cm⁻¹ (NH₂ deformation corresponding to proteins or amino acids). The results converge towards the conclusion that the transition phase between the primary cell wall and the secondary cell wall occurs between 17 and 18 dpa in fibers from TX19 cultivar, while this transition occurs between 21 and 24 dpa in fibers from TX55 cultivar.     

Atomic layer deposition (ALD) as a coating tool for reinforcing fibers

Layers of alumina were deposited on to bundled carbon fibers in an atomic layer deposition (ALD) process via sequential exposure to vapors of aluminium chloride and water, respectively. Scanning electron microscopic (SEM) images of the coated fibers revealed that each individual fiber within a bundle was coated evenly and separately, fibers are not bridged by the coating. SEM and transmission electron microscopic (TEM) images indicate that the coating was uniform and conformal with good adhesion to the fiber surface. Average deposition rate, measured from SEM images, was 0.06 nm per cycle at 500 °C. SEM also revealed that at deposition temperatures of 500 °C few of the fibers were damaged. At temperatures of 300 °C, no damaged fibers were observed, the average deposition rate decreased down to 0.033 nm per cycle. Oxidation resistance of the alumina-coated fibers was characterized by thermogravimetric analysis (TGA). The alumina coating improved oxidation resistance of the carbon fiber significantly. Oxidation onset temperature was 600 °C for fibers coated with a 45 nm thick alumina. Uncoated fibers, on the other hand, started to oxidize at temperatures as low as 250 °C.     

Spiral structures of cotton fiber

In the present article, data from the microscopic investigation of the morphological structure of a cellular wall and plasmalemma of the Central Asian cotton fiber are given at different stages of their development. The objects under investigation were live hairs of five middle-fiber cotton species (Tashkent-1, 108-F, Namangan-77, Margelan-3, G. llirsutum L.) and the coarse-fiber variety of G. arboreum L., so-called Turfan Gtiza. To observe the cotton hair surface morphology, the original method of gelatinous prints was used. It is shown that, in all investigated samples of cotton cell-hairs, spiral structures are observed in the packing of cellulose microfibrils on the surface of the primary cell wall. Also, it is established that the plasmalemma of a cotton cell-hair makes a spiral movement along the direction of its growth. On the basis of the received data, a conclusion is made about the spiral mechanism for the deposition of cellulose microfibrils on a primary cell wall surface and the spiral movement of plasmalemma.     

2.3 Wood pulp manufacturing and quality characteristics

Cellulose acetate being important in the fiber and textile industries is usually prepared from high quality cellulose such as cotton linters and wood pulps with an alpha cellulose content of more than 95%. In this section, therefore, wood pulps and cotton linters appropriate for cellulose acetate production were discussed in their chemical and physical properties so as to use them judiciously as natural raw materials for cellulose acetate production.     

On the Crosslinking of Cellulose under Exposure to Radiation

The effect of -irradiation of air-dry cotton cellulose on the degree of order of its supermolecular structure was studied at room temperature within a dose range of 0–2 MGy. The degree of order was evaluated by measuring the crystallinity index by the X-ray diffraction technique and the water-retaining capacity of irradiated cellulose upon both equilibrium saturation with water vapor and swelling in liquid water. The buildup of macroradicals in irradiated cellulose and their decay upon plasticization with water during a postradiation period were also studied. The complex behavior revealed was explained in terms of the effect of radiation-chemical crosslinks on the mobility of macrochains and on the submicroscopic capillarity of cellulose fiber structure.     

新型功能化离子液体[HeEIM]Cl的合成及其对棉纤维的溶解性能

合成了离子液体氯化1-(2-羟乙基)-3-乙基-咪唑([HeEIM]Cl), 并利用FTIR和1HNMR对其化学结构进行了表征. 考察了NaOH、微波和高压等处理方式对棉纤维的结晶度、聚合度(DP)和溶解率的影响. 研究了不同的溶解温度在微波加热和传统加热条件下对棉纤维的溶解率和再生纤维素的聚合度的影响. 利用FTIR, XRD, TGA和SEM等方法分别对溶解后得到的再生纤维素的化学结构、结晶度变化、热稳定性和表观形貌进行了分析. 结果表明, 合成的离子液体对棉纤维表现出很好的溶解能力, 且在溶解和再生过程中未发生化学变化. 棉纤维在高压条件下经质量分数为30%的NaOH预处理后, 溶解性能最佳. 微波加热法的溶解效果远远优于传统加热法, 且随着温度的升高, 溶解率逐渐增大. 溶解后得到的再生纤维素的结晶度变小, 聚合度下降, 热稳定性降低.     

Internally dispersed synthesis of uniform silver nanoparticles via in situ reduction of [Ag(NH3)2]+ along natural microfibrillar substructures of cotton fiber

Silver nanoparticles (Ag NPs) are known to have efficient antimicrobial properties, but the direct application of Ag NPs onto the surface of textiles has shown to be ineffective and raise environmental concerns because Ag NPs leach out during washing. In this study, non-leaching and stable Ag-cotton nanocomposite fiber was produced by the in situ formation of Ag NPs inside the cotton fiber. The reported method is to introduce a nanofluidic system in alkali-swollen cotton fiber. Sequential flows of [Ag(NH₃)₂]⁺ and reductant aqueous fluids into the opened microfibrillar channels yielded a self-assembly of Ag ions on the deprotonated cellulose and subsequent nucleation and particle growth on the microfibrils. Transmission electron and field emission scanning electron microscopy images showed Ag NPs evenly dispersed throughout the entire cross-section of the fiber and their fixation onto the isolated secondary cell wall, respectively. Despite the rapid reduction reaction and the absence of a stabilizing agent, the successful formation of monodispersed Ag NPs (12 ± 3 nm) was attributed to the self-controlled function of the highly organized microfibrillar substructures, which regulated the transport and mixing of reactants. Incorporation of Ag NPs into the internal structure of the cotton fiber did not significantly influence the cotton crystalline structure.     

Reaction pathway to CZTSe formation in CdI2

The thermal decomposition of cotton and hemp fibers was studied after mild alkaline treatments with tetramethyl-, tetraethyl- and tetrabutylammonium hydroxides with the goal of modeling the chemical activation during carbonization of cellulosic fibers. The thermal decomposition was studied by thermogravimetry/mass spectrometry and pyrolysis–gas chromatography/mass spectrometry (Py–GC/MS). The treated samples decomposed in two temperature ranges during heating in the thermobalance. At lower temperature, tetraalkylammonium hydroxides (TAAH) ionically bonded to the cellulose molecules were decomposed; moreover, the alkaline agents initiated the partial decomposition of cellulose. Those fiber segments, which were not accessible for TAAH, decomposed at similar temperatures as the original cotton and hemp samples. It is known that quaternary ammonium hydroxides swell the cellulosic fibers; however, the results of this study proved that there was a chemical interaction between the alkaline swelling agents and cotton or hemp fibers at rather low temperatures (200–300 °C). The evolved products indicated that the alkaline chemicals reacted with the cellulose molecules and alkylated compounds were formed. This observation was confirmed by thermochemolysis experiments carried out by Py–GC/MS using tetramethylammonium hydroxide reagent. The thermochemolysis experiments under mild conditions resulted in the methylation of the glucoside units and levoglucosan, and no peeling reactions of the sugar units were observed as during strong alkaline conditions described in the literature.

     

Study of depolymerization of cotton cellulose by Pb/PbO2 anode electrochemical catalysis in sulfuric acid solution

A novel method of cotton cellulose depolymerization is investigated in this paper. In this work, a three-electrode system, which contains a Pb/PbO₂ anode, two copper cathodes and a reference saturated calomel electrode (SCE), is applied to electrocatalytic depolymerization of cotton cellulose. After electrocatalytic depolymerization of cotton cellulose in 0.5M sulfuric acid solution using Pb/PbO₂ anode at room temperature (25 °C), the average degree of polymerization (DP) can be reduced to the minimum 367 from 1100. The effects of operating parameters, such as supporting electrolyte, current density and reaction time are investigated as well. The composition of the products in filtrate is characterized by phenol-sulfuric acid method, extraction, NMR, GC-MS and High Performance Liquid Chromatography (HPLC). In addition, the solid sample is analyzed via SEM images, XRD diffractogram, Ubbelohde capillary viscometer and FT-IR spectra. The results suggest that it is effective to convert cotton cellulose to soluble sugar, 5-hydroxymethylfurfural (5-HMF) and other products by electrocatalytic methods. However, the yield of products is low and needs further study. A novel method to significantly convert cotton cellulose to biofuels and biomaterials can be hopefully developed if the selectivity of cotton cellulose electrocatalytic depolymerization is improved in the future.     

Water absorbancy of never‐dried cotton fibers

Although neverdried cotton (NDC) fiber has been known to exhibit extremely high water absorbency, the reason for this has not yet been elucidated. In this study, changes in water absorbency, bound water content as revealed by differential scanning calorimetry (DSC), cellulose content and fiber crosssection observed by scanning electron microscopy (SEM) for NDC fibers at several stages of development (27–57 days postanthesis (DPA)) were investigated. It was found that the bound water content (27g/l00g) of NDC fibers at 50DPA is much smaller than that (40–73g/l00g) for fibers at 27–43DPA. Cellulose synthesis takes place within the cotton boll, a closed watercontaining system. Our results are rationalized by assuming that these water molecules are preventing the formation of intermolecular hydrogen bonds between the cellulose molecules as they are being formed. Other explanations for our experimental findings are: (i) the coexistence of precursors of cellulose and components, such as (1,3);glucans, that are very hydrophilic, and (ii) the presence in each NDC fiber of a prominent lumen that acts as a capillary system for water.     

Comparative physical and chemical analyses of cotton fibers from two near isogenic upland lines differing in fiber wall thickness

The thickness of cotton fiber cell walls is an important property that partially determines the economic value of cotton. To better understand the physical and chemical manifestations of the genetic variations that regulate the degree of fiber wall thickness, we used a comprehensive set of methods to compare fiber properties of the immature fiber (im) mutant, called immature because it produces thin-walled fibers, and its isogenic wild type Texas Marker-1 (TM-1) that is a standard upland cotton variety producing normal fibers with thick walls. Comprehensive structural analyses showed that im and TM-1 fibers shared a common developmental process of cell wall thickening, contrary to the previous report that the phase in the im fiber development might be retarded. No significant differences were found in cellulose content, crystallinity index, crystal size, matrix polymer composition, or in ribbon width between the isogenic fibers. In contrast, significant differences were detected in their linear density, cross-section micrographs of fibers from opened bolls, and in the lateral order between their cellulose microfibrils (CMFs). The cellulose mass in a given fiber length was lower and the CMFs were less organized in the im fibers compared with the TM-1 fibers. The presented results imply that the disruption of CMF organization or assembly in the cell walls may be associated with the immature phenotype of the im fibers.     

Analysis of the effects of catalytic bleaching on cotton

Hydrogen peroxide can be catalyzed to bleach cotton fibers at temperatures as low as 30°C by incorporating dinuclear tri-μ-oxo bridged manganese(IV) complex of the ligand 1,4,7-trimethyl-1,4,7-triazacyclononane (MnTACN) as the catalyst in the bleaching solution. The catalytic system was found to be more selective under the conditions applied than the non-catalytic H₂O₂ system, showing better bleaching performance while causing slightly lower decrease in degree of polymerization (DP) of cellulose. In order to gain fundamental knowledge of the bleach effect on cotton fibers and cellulose as its main component, especially after catalytic bleaching, X-ray Photoelectron Spectroscopy (XPS) was used to study surface chemical effects. The Washburn method was applied to investigate wetting properties, and liquid porosity was used to obtain pore volume distribution (PVD) plots. Parallel analyzes performed on model cotton fabric, i.e. “clean” cotton fabric stained with morin - a pigment regularly found in native cotton fiber, helped to differentiate between pigment oxidation and other bleaching effects produced on the (regular) industrially scoured cotton fabric. Bleaching was not limited to the chemical action but also affected cotton fiber capillary parameters most likely due to the removal of non-cellulosic materials as well as chain-shortened cellulose.     

Effect of Supramolecular and Morphological Structure on Cellulose Characteristics

The dependence of quality indicators of cotton cellulose obtained by an oxygen-alkaline digestion method, cellulose from the Bakai company, and wood cellulose on their supramolecular and morphological structure was studied by various physicochemical methods. The number of gel particles in cellulose solutions depends on their degree of polymerization; in solutions of their Na-CMC esters, on the content of the primary fiber wall of the starting cellulose     

Positively and negatively charged ionic modifications to cellulose assessed as cotton-based protease-lowering and hemostatic wound agents

Recent developments in cellulose wound dressings targeted to different stages of wound healing have been based on structural and charge modifications that function to modulate events in the complex inflammatory and hemostatic phases of wound healing. Hemostasis and inflammation comprise two overlapping but distinct phases of wound healing wherein different dressing material properties are required to bring pathological events under control when they present as a result of trauma or chronic wounds. Thus, we have designed cellulose wound dressings with properties that function through modified fiber surface properties to lower protease levels in the chronic wound and promote clotting in hemorrhaging wounds. With this in mind three finishing chemistries utilizing traditional pad-dry-cure approaches were explored for their potential to confer charged properties to cotton dressings. Cellulose dressings designed to remove cationic serine proteases from highly exudative chronic wounds were created to present negatively charged fibers as an ion exchange mechanism of protease-lowering. Phosphorylated cotton and polycarboxylic acid crosslinked cotton were prepared to examine their ability to remove human neutrophil elastase (HNE) from surrogate wound fluid. A cellulose phosphorylation reaction utilizing sodium hexametaphosphate: urea was explored to optimize cellulose phosphorylation as a function of HNE sequestration efficacy. Acid catalyzed cross linking of cellulose with butane-tetracarboxylic acid also resulted in a negatively charged dressing that removed HNE from solution more effectively than phosphorylated cellulose. Collagenase sequestration was also assessed with phosphorylated cellulose and polycarboxylic acid cross linked cellulose derivatives. Butanetetracarboxylic acid and phosphorylated cellulose functioned to remove collagenase from solution most effectively. Cellulose dressings designed to accelerate thrombosis and aggregation of blood platelets were prepared with a view to examining derivatized cotton fibers bearing a net positive charge to promote hemostasis. Cellulose and chitosan dressings bearing an aminoglucan functionality were created by grafting chitosan on cotton and preparing aminized cotton. The preparation of chitosan-grafted cotton dressings was completed with a citric acid grafting onto cellulose. Aminized cotton was functionalized as an ethylamino-ether cellulose derivative. The chitosan-grafted and aminized cotton demonstrated a dose response gelling of citrated sheep blood.     

High resistance to thermal decomposition in brown cotton is linked to tannins and sodium content

Brown cotton fibers (SA-1 and MC-BL) studied were inferior to a white cotton fiber (Sure-Grow 747) in fiber quality, i.e., a shorter length, fewer twists, and lower crystallinity, but showed superior thermal resistance in thermogravimetric, differential thermogravimetric, and microscale combustion calorimetric (MCC) analyses. Brown cotton fibers yielded 11–23 % smaller total heat release and 20–40 % greater char. Washing fibers in water and a 1 % NaOH solution showed that rich natural inorganic components and the condensed tannins present in brown cotton are responsible for the unusual thermal property. The loss of inorganics from white cotton during a water wash increased the thermal decomposition temperature of cellulose, resulting in no char yield. However, the stronger binding of metal ions for brown cotton as well as its dominant adsorption of sodium ions after a 1 % NaOH wash facilitated the low-temperature thermal-reaction route; the sodium content showed a significant negative correlation with the heat release capacity of the fiber. Condensed tannins greatly enhanced the adsorption of sodium ions to the fiber and exhibited inherent thermal stability. The limiting oxygen indices (LOI) calculated from the MCC parameters indicated the slower burning characteristic of brown cotton, and its LOI was further increased upon adsorption of sodium ions.     

Surface modification of cellulose fibers with layer-by-layer self-assembly of lignosulfonate and polyelectrolyte: effects on fibers wetting properties and paper strength

To convert the hydrophilic cellulose fiber into hydrophobic, multilayers composed of cationic polyacrylamide (CPAM) and lignosulfonate (LS) were constructed on cellulose fiber surface using layer-by-layer (LBL) self-assembly technique. The presence of CPAM/LS multilayers were validated by zeta potential, X-ray photoelectron spectroscopy and atomic force microscopy (AFM). It was found that potential of fiber surface inversed after deposition of each layer, the contents of characteristic elements (i.e. S and N) of CPAM/LS multilayers increased with increasing bilayer number, furthermore, the calculated surface LS content increased linearly as a function of bilayers. AFM phase images indicated that the cellulose microfibrils on fiber surface were gradually covered by LS granules, resulting in an increase in fiber surface roughness as self-assembly proceeded. The wetting properties of modified cellulose fibers were detected by dynamic contact angle measurement. The results showed that the initial water contact angle gradually increased and the attenuation rate of the contact angle gradually decreased with the number of bilayers, suggesting that the controllable hydrophobicity of cellulose fiber can be achieved depending on the number of bilayers. It also showed that the polyelectrolyte presented in the outermost layer significantly influenced the wetting properties of cellulose fibers, and a higher hydrophobicity was observed when LS was in the outermost layer. Moreover, tensile strength test was performed on the handsheet prepared from LBL modified fibers to evaluate the effect of CPAM/LS multilayers on strength property of cellulose fiber networks. The tensile index of handsheet prepared from fibers modified with a (CPAM/LS)₅ multilayer increased by 12.4% compared with that of handsheet prepared from original fibers. The print density of handsheet increased with the number of bilayers, suggesting that printability of the handsheet was improved by constructing CPAM/LS multilayers on cellulose fiber surface. This strategy will have a positive impact and potential application value in printing process control of cellulose fiber-based products.     

Targeted particulate adhesion to cellulose surfaces mediated by bifunctional fusion proteins

The adhesion of particles to surfaces is an integral element in many commercial and biological applications. In this article, we report on the direct measurements of protein-mediated deposition and binding of particles to model cellulose surfaces. This system involves a family of heterobifunctional fusion proteins that bind specifically to both a red dye and cellulose. Amine-coated particles were labeled with a red dye, and a fusion protein was attached to these particles at various number densities. The strength of adhesion of a single particle to a cellulose fiber was measured using micropipette manipulation as a function of the specificity of the protein and its surface density and contact time. The frequency and force of adhesion were seen to increase with contact time in fiber experiments. The dynamics of adhesion of the functionalized particles to cellulose-coated glass slides under controlled hydrodynamic flow was explored using a flow chamber for two scenarios: detachment of bound particles and attachment of particles in suspension as a function of the shear rate and surface density of protein. Highly specific adhesion was observed. The critical shear rate for particle detachment was an increasing function of cellulose binding domain (CBD) density on particle surface. A rapid irreversible attachment of particles to cellulose was observed under flow. Using a family of proteins that were divalent for binding either the red dye or cellulose, we found that particle detachment occurred because of the failure of the cellulose-CBD bond. A comparison of fiber binding and particle detachment results suggests that forces of adhesion of particles to cellulose of up to 2 nN can be obtained with this molecular system through multiple interactions. This study, along with the adhesion simulations currently under development, forms the basis of particulate design for specific adhesion applications.