Synthesis of ferrocenyl monospirooxindolopyrrolidines—a facile [3+2]-cycloaddition of azomethine ylides

One-pot synthesis of novel ferrocenylmonospirooxindolopyrrolidines has been accomplished in good yield via a facile [3+2]-cycloaddition reaction of several azomethine ylides, derived from isatin/5,7-dibromoisatin and sarcosine, with various ferrocene derivatives as the dipolarophile. The effect of solvent on the [3+2]-dipolar cycloaddition reaction is also studied.     

Azidation vs [3 + 2]-cycloaddition: Chemoselective reaction of sodium azide towards o-alkynylaldehydes for the synthesis of N-heterocycles

The chemoselective synthesis of functionalized azido- and triazolo-containing nitrogen heterocycles using sodium azide and o-alkynylaldehydes has been described. The azidation reaction was preferred in acetonitrile while the [3 + 2]-cycloaddition was favored in DMSO. Furthermore, the azido-pyranoquinolines were employed for the synthesis of benzonaphthyridines via the Staudinger reaction at room temperature.     

Kinetics and thermochemistry of [2π + 2σ + 2σ]-cycloaddition of quadricyclane to tetracyanoethylene

Kinetic data for the unusual [2π + 2σ + 2σ]-cycloaddition of quadricyclane to tetracyanoethylene in toluene have been obtained for the first time. The same reaction in 1,4-dioxane appears to be the most exothermic among known cycloaddition reactions. The entropy of activation and reaction volume differ only slightly from the corresponding parameters of conventional Diels–Alder reactions.     

Stereoselective synthesis of 2-substituted 3-azabicyclo[3.2.0]heptan-2-ones by [2+2]-cycloaddition of N-allyl-β-N-keteniminium salts derived from (R)-vinylglycinol

A stereoselective synthesis of (1R,2R,5S)-2-benzyloxymethyl-3-azabicyclo[3.2.0]heptan-2-one was achieved, by intramolecular [2+2]-cycloaddition of (R)-vinylglycinol-derived N-allyl-β-N-keteniminium salts, with high facial diastereoselection. The regio- and stereochemical courses have been qualitatively investigated by Molecular Mechanics calculations.     

Total synthesis of (±)-hirsutine: application of phosphine-catalyzed imine-allene [4 + 2] annulation

The total synthesis of the indole alkaloid hirsutine has been achieved, with a key step being the application of our phosphine-catalyzed [4 + 2] annulation of an imine with ethyl α-methylallenoate. From commercially available indole-2-carboxaldehyde, the target was synthesized in 14 steps and 6.7% overall yield.     

π-Extension in expanded porphyrins: cyclo[4]naphthobipyrrole

The π-extended cyclo[4]naphthobipyrrole 1a has been prepared via an Fe(III)-mediated oxidative cyclization of an alkyl-substituted naphthobipyrrole. The structure of this new expanded porphyrin, isolated as the deprotonated sulfate salt, was characterized by spectroscopic means, as well through a single crystal X-ray diffraction analysis. Salt 1a displays a total of four well-resolved redox waves as determined by cyclic voltammetry. It also displays bathochromically shifted near-IR absorption maxima compared to the diprotonated forms of nonannulated cyclo[8]pyrroles.     

Base mediated synthesis of α-aminated aroyl/acetylnaphthalenes through [4+2] annulations

We have developed a base promoted simple, efficient and alternative approach for the synthesis of 4-amino-3-aroyl//heteroaroyl/acetyl-2-methylsulfanyl-naphthalene-1-carbonitriles by reaction of easily accessible 3,3-bis(methylthio)-1-aryl/heteroaryl/acetylprop-2-en-1-one and 2-cyanomethyl-benzonitrile. Reaction of 1-(2-halo/methoxy-phenyl)-3,3-bis(methylthio)prop-2-en-1-one and 2-cyanomethyl-benzonitrile under basic conditions also afforded 6-(methylthio)-7-oxo-7,12-dihydrobenzo[c]acridine-5-carbonitrile along with usual product. Structure of the synthesized product has been confirmed by single X-ray crystallography.     

Kinetics and thermochemistry of the [2π+2σ+2σ]-cycloaddition of quadricyclane with 2,3-dicyano-1,4-benzoquinone

Two-stage [2π+2σ+2σ]-cycloaddition of quadricyclane ( 2 ) with 2,3-dicyano-1,4-benzoquinone ( 1 ) with a huge difference in the activity of two reaction centers has been studied. In the first stage (kinetic control), the cycloaddition of 2 takes place on the activated С₂=С₃ bond of 1 to form the monoadduct 3 , and in the second stage the cycloaddition of 2 on the С₅=С₆ bond of the monoadduct 3 occurs by 6 orders of magnitude lower with the formation of bisadduct 4 . The structures of adducts 3 and 4 have been proved by NMR data and the X-Ray method, respectively. The kinetics of the first and second stages, the enthalpy of dissolution of 1 in the π-donor solvents, and the enthalpy of the reaction 1+2→3 have been measured.     

3H-Pyrroles as a platform for the catalyst-free construction of dihydropyrrolo[2,1-b]oxazoles: [4 + 2]-cycloaddition vs [2 + 3]-annulation with 1-cyano-3-hydroxyalkynes

Non-aromatic pyrrole isomers, 3,3-dialkyl-2-aryl-3H-pyrroles, were reacted with 1-cyano-3-hydroxyalkynes under mild, catalyst-free conditions (20–60?°C) to regio- and stereoselectively afford (Z)-2-(dihydropyrrolo[2,1-b]oxazolylidene)acetonitriles in 62–82% yield, thus evidencing the preference for [2?+?3]-annulation over the [4?+?2]-Diels-Alder alternative. The reaction involves initial nucleophilic addition of the pyrrole moiety at the triple bond followed by tandem ring closure of an anionic intermediate.     

Automated synthesis of [18F]FMISO on IBA Synthera®

In cancer cells hypoxia can cause resistance to both radio- and chemo-therapy. Being able to quantify, the degree of hypoxia in the cells is a useful tool in therapy planning. The positron emitting 1-[¹⁸F]fluoro-3-(2-nitro-1H-imidazol-1-yl)propan-2-ol ([¹⁸F]FMISO) is the most extensively used tracer for imaging hypoxia. Automated synthesis of [¹⁸F]FMISO was set up on IBA Synthera^®. The precursor 1-(2′-nitro-1′-imidazolyl)-2-O-tetrahydropyranyl-3-O-p-toluenesulfonyl propanediol (NITTP) was heated at 100 °C for 10 min with [K/K 2.2.2.]⁺[¹⁸F]^? and thereafter hydrolyzed with 0.1 M hydrochloric acid at 90 °C for 2 min. Purification was performed on solid-phase extraction (SPE) cartridges. [¹⁸F]FMISO was obtained in 50 ± 3 % (n = 6) radiochemical yield (decay-corrected) in 35 min synthesis time with radiochemical purity of ≥98 %. The use of disposable Integrated Fluid Processors (IFP?:s) and cartridge purification simplifies the handling and shortens the synthesis time. This is a no frills setup based on all commercially available materials and the synthesis is performed with minor changes from the FDG time-list.     

Regioselective [3+2] cycloaddition of nitrile oxides to 1Н-pyrrole-2,3-diones: synthesis of spiro[pyrroledioxazoles]

Chemistry of Heterocyclic Compounds - 1,3-Dipolar cycloaddition of 1H-pyrrole-2,3-diones to nitrile oxides generated in situ from N-hydroxybenzimidoyl chlorides by the action of triethylamine...     

“Metal-free” synthesis of 1,2,3-triazoles via tandem azidation,intramolecular [3+2]-cycloaddition and aromatization of ethyl acrylate derivatives

An efficient “one-pot” method for the synthesis of substituted 1,2,3-triazole derivatives in excellent yields as single regioisomer is reported. The key transformation involves an atom-efficient tandem azidation, intramolecular [3+2]-cycloaddition and aromatization of acrylate derivatives on treatment with NaN₃ in DMF under mild conditions.     

Enamine–azide [2+3]-cycloaddition as a method to introduce functional groups into fluorescent dyes

Fluorescent dyes are a significant research tool with various applications in modern science. However, many experiments require the preparation of covalent dye conjugates, which is impossible without the presence of a functional group on the dye molecule. Unfortunately, the introduction of such groups is often a complicated task. Herein, we report a novel approach for the introduction of functional groups into fluorescent dyes, based on the [2+3]-cycloaddition reaction of “terminal” enamines with azides. The synthesis of such “terminal” enamines is carried out by the condensation of formamide acetals with a methyl group that is influenced by a strong electron withdrawing group. Thus, the proposed functionalization technique requires only the presence of a methyl group in the relevant position of the initial non-functionalized fluorescent dye.     

Resolution of sclareolide as a key intermediate for the synthesis of Ambrox®

Sclareolide was efficiently resolved by a diastereomeric salt formation method using homochiral erythro-2-amino-1,2-diphenylethanol (ADPE) as a resolving agent.     

One-pot synthesis of [2+2]-helicate-like macrocycle and 2+4-μ4-oxo tetranuclear open frame complexes: Chiroptical properties and asymmetric oxidative coupling of 2-naphthols

Synthesis of binuclear Cu(II) terminally closed [ 2+2 ]- double-stranded helicate-like macrocycles 1, 1′ , 1″ , 2 , 2′ , 2″ and 2+4- μ₄-oxo tetranuclear open frame complexes 3 , 3′ , 3″ , 4 , 4′ , 4″ are established. Adapting one-pot self-assembly technique from simple three components systems: 1,1′-binaphthyl-2,2′-diamine, 4-methyl-2,6-diformyl phenol and cupric salts, the helicate-like [ 2+2 ]- macrocyclic complexes 1–1″, 2–2″ and 2+4- μ₄-oxo tetranuclear complexes 3–3″ , 4–4″ were obtained by appropriately altering the reaction condition such as temperature and subcomponent ratio. Density Functional Theory (DFT) calculations were carried out for understanding the structural geometries, intermediates involved in the diverse formation of [ 2+2 ] and 2+4 frameworks. The single crystal X-ray structures obtained for 1′ , 2 and 3 confirms the self-assembly process in line with DFT. This detailed analysis tempted us to derive a plausible mechanism for this long standing challenge in the synthesis of such macrocycles using 1,1′-binaphthyl-2,2′-diamine (BNDA) and aromatic aldehyde. The chiroptical properties of enantiopure complexes and their catalytic applications in asymmetric oxidative coupling of 2-naphthol to chiral 1,1’-Bi-2-naphthol (BINOL) achieved in good yield and ee were discussed.     

Synthesis and structures of mercury and cadmium complexes: [Ph4Sb] 2 + [Hg2I6]2−·Ph2Hg, [Ph4Sb] 2 + [E2I6]2− (E = Hg, Cd), and [Ph4Sb] 2 + [Hg4I10]2−

The reaction of pentaphenylantimony with mercury iodide affords the ionic complex [Ph₄Sb] ₂ ⁺ [Hg₂I₆]^2?·Ph₂Hg (I). The [Ph₄Sb] ₂ ⁺ [Hg₂I₆]^2? (II) and [Ph₄Sb] ₂ ⁺ [Cd₂I₆]^2? (III) complexes are synthesized from tetraphenylantimony iodide and mercury and cadmium iodides. The [Ph₄Sb] ₂ ⁺ [Hg₄I₁₀]^2? complex (IV) is prepared from tetraphenylantimony 2,4-dimethylbenzenesulfonate and mercury iodide. According to the X-ray diffraction data, the Sb atom in the [Ph₄Sb]⁺ cations of complex I has virtually ideal tetrahedral coordination (the CSbC angles are 108.09°–109.64°). In the central square fragment Hg₂I₂ of the [Hg₂I₆]^2? anion, the Hg-I_br bond lengths are 2.825 and 3.075 Å, and the terminal iodine atoms are more strongly bonded to the mercury atoms (Hg-I_term 2.691 and 2.700 Å). The [Cd₂I₆]^2? anion in complex III has a similar structure (the Cd-I_bridg and Cd-I_term distances are 2.865, 2.872 and 2.723, 2.748 Å, respectively). The anions in complex IV are joined by I…Hg (3.651 Å) and I…I (4.058 Å) interactions into an infinite dimeric network.