Simultaneous, sensitive and selective on-line chemiluminescence determination of Cr(III) and Cr(VI) by capillary electrophoresis

A novel in-capillary reduction and capillary electrophoretic (CE)-chemiluminescence (CL) method was developed for the sensitive and selective determination of chromium(III) and chromium(VI). The proposed method was based on the in-capillary reduction of Cr(VI) with acidic H₂O₂ to form Cr(III) using the zone-passing technique and chemiluminescence detection of Cr(III). The sample [Cr³⁺ and CrO₄²⁻], hydrochloric acid, and H₂O₂ (reductant) solution segments were injected for specified periods of time in this order from the anodic end of a capillary, followed by application of an appropriate running voltage between both ends. As both chromium species have opposite charges, Cr³⁺ migrates to the cathode while CrO₄²⁻ ion, moving oppositely to the anode, reacts with acidic H₂O_2, resulted in formation of Cr³⁺. Based on the migration time difference of both Cr³⁺ ions, they were separated by zone electrophoresis. Running buffer was composed of 0.02 mol l⁻¹ HAc-NaAc (pH 4.7) with 1×10⁻³ mol l⁻¹ EDTA. Parameters affecting CE-CL separation and detection, such as reductant concentration, mixing mode of the analytes with CL reagent, CL reaction reagent pH and concentration, stability of luminol-hydrogen peroxide mixed solution were optimized. The limits of detection for chromium(III) and chromium(VI) (3σ) were 6×10⁻¹³ mol l⁻¹ (mass concentration 12 zmol) and 8×10⁻¹² mol l⁻¹ (160 zmol), respectively. This method offered potential advantages of simplicity, sensitivity, selectivity and applicability to the determination of Cr(III) and Cr(VI) in environmental water.     

Enantioseparation of tartaric acid by ligand‐exchange capillary electrophoresis using contactless conductivity detection

A method for the determination of tartaric acid enantiomers using CE with contactless conductivity detection has been developed. Cu(II) as a central metal ion together with l ‐hydroxyproline were used as a chiral selector, the BGE was composed of 7 mM CuCl_2, 14 mM trans‐4‐hydroxy‐l ‐proline, and 100 mM ε‐aminocaproic acid; the pH was adjusted to 5 by hydrochloric acid. Separation with a resolution of 1.9 was achieved in 9 min in a polyacrylamide‐coated capillary to suppress the EOF. Various counterions of the BGE were studied, and migration order reversal was achieved when switching from ε‐aminocaproic acid to l ‐histidine. With detection limits of about 20 μM, the method was applied to the analysis of wine and grape samples; only l ‐tartaric acid was found.     

Application of charged single isomer derivatives of cyclodextrins in capillary electrophoresis for chiral analysis

The review focuses on the role of ionic or ionisable single isomer derivatives (SIDs) of cyclodextrins on the separation of chiral analytes in capillary electrophoresis (CE), covering the period since the year 2000. The advantages of using pure compounds are discussed, as well as the ways to optimise the separations in the context of a rational approach to these techniques. Specific attention is paid to the modulation of the selector–analyte interaction. The advantage due to a detailed knowledge of equilibria occurring in solution during the CE run is underlined, particularly in the case of the presence of metal complexes, as occurs in chiral ligand exchange capillary electrophoresis (CLECE).     

Chiral separation of halogenated amino acids by ligand-exchange capillary electrophoresis

The chiral separation of halogenated amino acids by ligand-exchange CE is described. Halogenated amino acids attracted increasing interest in recent years because of their physiological activities. Different chiral selectors, as there are L-4-hydroxyproline, L-histidine, and N-alkyl derivatives of L-4-hydroxyproline in form of their copper(II) complexes, are compared for their chiral recognition ability for halogenated amino acids. The influence of various parameters, such as selector concentration, pH, organic modifier, and field strength, on the resolution was investigated. All halogenated amino acids investigated were baseline-separated under optimized conditions.     

Acrylate-Assisted Arene–Chromium Bond Cleavage: Generation of a [Cr(CO)2] Fragment under Mild Conditions*

Displacement of the benzene ligand in 1 surprisingly occurs more readily than that of the methyl acrylate ligand. This paves the way for 1 to undergo arene exchange and arene substitution reactions, which may be triggered by a η²→η⁴ haptotropic rearrangement of the acrylate. Complex 1 is thus a mild precursor of the highly unsaturated fragments [Cr(CO)₂] (see scheme) and [Cr(CO)₂(η₂-acrylate)].     

Simultaneous determination of DTPA,EDTA, and NTA by capillary electrophoresis after complexation with copper

We present a method for simultaneous determination of the aminopolycarboxylic acids DTPA, EDTA and NTA in dishwashing detergents, paper mill waters, and natural waters by capillary electrophoresis (CE). The complexing agents were examined as their copper(II) complexes and separated by conventional CE with reversed polarity of the applied voltage. The optimum separation conditions were established by varying the pH and phosphate and tetradecyltrimethylammonium bromide (TTAB) concentrations in the run buffer. The separations were carried out in a fused-silica capillary (61 cm×75 m i.d.) filled with phosphate buffer (80 mmol L^–1, TTAB concentration 0.5 mmol L^–1, pH 7.1, voltage –20 kV) using direct UV detection at 191 and 254 nm. With this CE method all the peaks in the electropherograms were properly separated, the calibration plots gave good correlation coefficients and all three complexing agents could be detected in less than 4 min. Linear calibration plots were obtained for CuDTPA, CuEDTA and CuNTA; limits of detection were 0.03 mmol L^–1 for all complexing agents and recoveries for all tested samples were within the range 104±7%. Results obtained from dishwashing detergent samples were found to be reliable and comparable with those from HPLC (R²=0.989) and UV–Vis (R²=0.985) methods.     

Affinity capillary electrophoresis to evaluate the complex formation between poliovirus and nanobodies

It was demonstrated that nanobodies with an in vitro neutralizing activity against poliovirus type 1 interact with native virions. Here, the use of capillary electrophoresis was investigated as an alternative technique for the evaluation of the formation of nanobody–poliovirus complexes, and therefore predicting the in vitro neutralizing activity of the nanobodies. The macromolecules are preincubated offline in a specific nanobody‐to‐virus ratio and analyzed by capillary electrophoresis with UV detection. At low nanobody‐to‐virus ratios, a clear shift in migration time of the viral peak was observed. A broad peak was obtained, indicating the presence of a heterogeneous population of nanobody–virion complexes, caused by the binding of different numbers of nanobodies to the virus particle. At elevated nanobody‐to‐virus ratios, a cluster of peaks appeared, showing an additional increase in migration times. It was shown that, at these high molar excesses, aggregates were formed. The developed capillary electrophoresis method can be used as a rapid, qualitative screening for the affinity between poliovirus and nanobodies, based on a clearly visible and measurable shift in migration time. The advantages of this technique include that there is no need for antigen immobilization as in enzyme‐linked immunosorbent assays or surface plasmon resonance for the use of radiolabeled virus or for the performance of labor‐ and time‐intensive plaque‐forming neutralization assays.     

Determination of the binding constant for the inclusion complex between procaine hydrochloride and beta-cyclodextrin by capillary electrophoresis

The apparent electrophoretic mobilities of procaine hydrochloride (μ_i) in a series of concentration of β-cyclodextrin were measured directly by capillary electrophoresis technology. A new mathematical treatment method is proposed, which based on the fact that the molar ratio of the inclusion complex was 1:1 established by spectrophotometry. Using the proposed method, the binding constant of the inclusion complex of procaine hydrochloride with β-cyclodextrin can be obtained easily. The determination result was in correspondence with those of the spectrophotometric and fluorescence methods.     

Investigation of luminescence and optical absorption of K2LiAlF6:Cr single crystals

Photoluminescence, absorption and excitation spectra of K₂LiAlF₆ single crystals doped with 1% of Cr³⁺ are presented. The near-infrared photoluminescence observed at room temperature, 77 and 4 K are attributed to the zero-phonon spin-allowed ⁴T₂(⁴F)→⁴A₂(⁴F) transition of Cr³⁺ octahedrally coordinated by F⁻ ions. Lifetimes are obtained. The 4 K emission broad band was described in terms of normal modes of the octahedral complex [CrF₆]³⁻. The Racah, crystal-field and Huang-Rhys parameters are calculated and the quantum efficiency and thermal quenching estimated and compared with Cr³⁺ properties in different environments.     

Speciation of chromium (III) and chromium (VI) by capillary electrophoresis with contactless conductometric detection and dual opposite end injection

A sensitive, rapid and inexpensive capillary electrophoretic method for the determination of Cr(III) and Cr(VI) species is presented. The method is based on the dual opposite end injection principle and contactless conductometric detection. The sample containing cationic and anionic species is injected into the opposite ends of the separation capillary and after the high voltage is applied, the analytes migrate towards the capillary center, where the cell of a contactless conductivity detector is placed. The method does not require any sample pretreatment, except dilution with deionized water. The separation of Cr(III), Cr(VI) and other common inorganic anions and cations is achieved in less than 4 min. The parameters of the separation electrolyte solution, such as pH and concentration of L-histidine, were optimized. Best results were achieved with electrolyte solution consisting of 4.5 mM L-histidine, adjusted to pH 3.40 with acetic acid. The detection limits achieved for Cr(III) and Cr(VI) were 10 and 39 microg.L(-1), respectively. The repeatability of migration times and peak areas was better than 0.3% and 2.8%, respectively. The developed method was applied to the analyses of rinse water samples from the galvanic industry. The results for the determination of Cr(III) and Cr(VI) were in good agreement with the results obtained by certified differential spectrophotometric method using diphenylcarbazide (CN 83 0520-40) and with the results for the total chromium concentrations determined by electrothermal atomic absorbance spectrometry (ET-AAS) and inductively coupled plasma-mass spectrometry (ICP-MS).     

Separation and kinetic study of chromium(III) chloro complexes by capillary electrophoresis

Summary Three Cr(III) species (dichlorotetraaquachromium (III), [CrCl₂(H₂O)₄]⁺; monochloropentaaquachromium(III), [CrCl(H₂O)₅]²⁺; and hexaaquachromium(III), [Cr(H₂O)₆]³⁺) have been separated and determined by capillary electrophoresis. The first two complexes could be detected in direct mode in phosphate buffer, but because the absorption of complex [Cr(H₂O)₆]³⁺ is poor in the UV range, indirect UV detection had to be used. For indirect detection 5 mM imidazole was added to the buffer solution. The formation and decomposition of the different Cr(III) complexes were monitored in time after the preparation of solutions of CrCl₃.6H₂O. The slowest process was the decomposition of [CrCl(H₂O)₅]²⁺; 300 h after preparation of a solution of CrCl₃.6H₂O of pH 1 the solution contained only [Cr(H₂O)₆]³⁺. The effects of pH and the content of some matrix ions on the rates of conversion of the complexes were studied. The kinetic characteristics of this complex system could be investigated adequately by means of capillary electrophoresis. Presented at Balaton Symposium on High-Performance Separation Methods, Siófok, Hungary, September 1–3, 1999     

Enantioseparation of α‐hydroxy acids by chiral ligand exchange CE with a dual central metal ion system

Using two kinds of central metal ions in a background electrolyte, ligand exchange CE was investigated for the simultaneous enantioseparation of dl ‐malic, dl ‐tartaric, and dl ‐isocitric acids. Ligand exchange CE with 100 mM d ‐quinic acid as a chiral selector ligand and 10 mM Cu(II) ion as a central metal ion could enantioseparate dl ‐tartaric acid but not dl ‐malic acid or dl ‐isocitric acid. A dual central metal ion system containing 0.5 mM Al(III) ion in addition to 10 mM Cu(II) ion in the background electrolyte enabled the simultaneous enantioseparation of the three α‐hydroxy acids. These results suggest that the use of a dual central metal ion system can be useful for enantioseparation by ligand exchange CE.     

Aqueous Capillary Electrophoresis of Peptides Part 2: An Investigation of Quantitative Determinants of Hydration and Solvation Relationships

Summary From the published electrophoretic data for a set of 58 peptides at pH 2.5 we have determined the excess hydration required to correct the deviations of the 31 higher-charged peptides from the Offord plot for the 27 singly-charged peptides. These values of the excess hydration were then used to test physical models by regression analysis. The dominant variable is the total excess positive charge, but the number of excess single positive charges and the number of pairs of positive charges – both at the end and internally – were significant determinants. The effect of acidic side chains was ambiguous throughout the analyses and this was presumed to arise from the ability of carboxy groups to be the sites of additional hydration or to diminish hydration via internal bonding with amino groups. A hydrophobicity index was included in he analysis, but surprisingly this too had little effect. In the last stage of the regressions, we also included coding for secondary structure within the peptides. This increased R² for the plots of the excess hydration versus values calculated from the regression constants (Y) from 0.95 to 0.97. Some solvation relationships were particularly good at modelling the hydration of the smaller, lesser-charged peptides, whilst others excelled in the opposite direction. The final model appeared to deal equally well with both extremes, but is not sufficiently sensitive to allow for all of the variations between peptides. As a result, the excess hydration was modelled very well for many of the peptides (±1–2 waters over the range of excess hydration form 5–276), but poorly for a few (± 100–200%). It was not possible to find another set of peptides that could be independently analysed in a similar fashion and compared. However, the regression constants were applied to an alternative set. Although appearing to fall in a generally reasonable range, various tests of the resultant calculated values indicated that this application was not valid. The second set of peptides were much more hydrophilic and the number of amino acid residues with an extended secondary structure appeared to be a contributing factor.     

Characterization of complexes between phenethylamine enantiomers and β‐cyclodextrin derivatives by capillary electrophoresis—Determination of binding constants and complex mobilities

To optimize chiral separation conditions and to improve the knowledge of enantioseparation, it is important to know the binding constants K between analytes and cyclodextrins and the electrophoretic mobilities of the temporarily formed analyte‐cyclodextrin‐complexes. K values for complexes between eight phenethylamine enantiomers, namely ephedrine, pseudoephedrine, methylephedrine and norephedrine, and four different β‐cyclodextrin derivatives were determined by affinity capillary electrophoresis. The binding constants were calculated from the electrophoretic mobility values of the phenethylamine enantiomers at increasing concentrations of cyclodextrins in running buffer. Three different linear plotting methods (x ‐reciprocal, y ‐reciprocal, double reciprocal) and nonlinear regression were used for the determination of binding constants with β‐cyclodextrin, (2‐hydroxypropyl)‐β‐cyclodextrin, methyl‐β‐cyclodextrin and 6‐O‐α‐maltosyl‐β‐cyclodextrin. The cyclodextrin concentration in a 50 mM phosphate buffer pH 3.0 was varied from 0 to 12 mM. To investigate the influence of the binding constant values on the enantioseparation the observed electrophoretic selectivities were compared with the obtained K values and the calculated enantiomer‐cyclodextrin‐complex mobilities. The different electrophoretic mobilities of the temporarily formed complexes were crucial factors for the migration order and enantioseparation of ephedrine derivatives. To verify the apparent binding constants determined by capillary electrophoresis, a titration process using ephedrine enantiomers and β‐cyclodextrin was carried out. Furthermore, the isothermal titration calorimetry measurements gave information about the thermal properties of the complexes.     

Determination and comparison of stability constants of tungsten(VI) and molybdenum(VI) with nitrilotriacetic acid and glutamic acid at different ionic strengths

The formation constants of species formed in the systems H⁺?+?W(VI)?+?nitrilotriacetic acid (NTA) and H⁺?+?NTA have been determined in aqueous solution for pH?=?4–9 at 25°C and different ionic strengths ranging from 0.1 to 1.0?mol?dm^?3 NaClO₄, using potentiometric and spectrophotometric techniques. It was shown that tungsten(VI) forms a mononuclear 1?:?1 complex with NTA of the type WO₃L^3? at pH?=?7.5. The composition of the complex was determined by the continuous variations method. The complexation of molybdenum(VI) with glutamic acid was investigated in aqueous solution ranging in pH from 4 to 9, using polarimetric, potentiometric and spectrophotometric techniques. The composition of the complex was determined by the continuous variations method. It was shown that molybdenum(VI) forms a mononuclear 1?:?1 complex with glutamic acid of the type MoO₃L^2? at pH?=?6.0. The dissociation constants of glutamic acid and the stability constants of the complex were determined at 25°C and at ionic strengths ranging from 0.1 to 1.0?mol?dm^?3 sodium perchlorate. In both complex formation reactions the dependence of the dissociation and stability constants on ionic strength is described by a Debye-Huckel type equation. Finally, a comparison has been made between the patterns of ionic strength dependence for the two complexes and the results have been compared with data previously reported.     

Use of inorganic, complex-forming ions for selectivity enhancement in capillary electrophoretic separation of organic compounds

Capillary electrophoresis (CE) is a powerful separation method based on the migration of charged species under the influence of electric field. The main merits of CE are high separation efficiency, short analysis time and small consumption of solvents and samples. However, the main drawbacks of CE are generally lower sensitivity compared to classical column-chromatographic methods.Selectivity and/or sensitivity of CE separation can be improved by forming complexes between analytes and a complex-forming reagent present as an additive in the background electrolyte (BGE). We focus this review primarily on the application of inorganic complex-forming reagents added to the BGE to separate organic ligands. We briefly mention common CE separations of inorganic analytes (mainly metal ions) using BGEs with organic ligands (e.g., hydroxycarboxylic or aminopolycarboxylic acids) as selectors.The review involves brief theoretical consideration of the significance of the effect of complex formation on separation selectivity and/or sensitivity in CE, but the major topic is critical evaluation of different inorganic complex-forming reagents used recently in the CE analysis of organic compounds, including:

(i)

borate, tungstate and molybdate in separating organic compounds possessing vicinal -OH groups;

(ii)

ligand-exchange CE and capillary electrochromatography in chiral analysis; and,

(iii)

the role of metal ions as central ions employed for selectivity enhancement of CE separation of various classes of organic compounds, including biopolymers.

     

Evaluation of capillary zone electrophoresis for the quality control of complex biologic samples: Application to snake venoms

Snake venoms constitute a very promising resource for the development of new medicines. They are mainly composed of very complex peptide and protein mixtures, which composition may vary significantly from batch to batch. This latter consideration is a challenge for routine quality control (QC) in the pharmaceutical industry. In this paper, we report the use of capillary zone electrophoresis for the development of an analytical fingerprint methodology to assess the quality of snake venoms. The analytical fingerprint concept is being widely used for the QC of herbal drugs but rarely for venoms QC so far. CZE was chosen for its intrinsic efficiency in the separation of protein and peptide mixtures. The analytical fingerprint methodology was first developed and evaluated for a particular snake venom, Lachesis muta . Optimal analysis conditions required the use of PDADMAC capillary coating to avoid protein and peptide adsorption. Same analytical conditions were then applied to other snake venom species. Different electrophoretic profiles were obtained for each venom. Excellent repeatability and intermediate precision was observed for each batch. Analysis of different batches of the same species revealed inherent qualitative and quantitative composition variations of the venoms between individuals.     

Ligand exchange and complex formation kinetics studied by NMR exemplified on fac-[(CO)3M(H2O)] (M = Mn, Tc, Re)

In this review ligand exchange and complex formation reactions on fac-[(CO)₃M(H₂O)₃]⁺ (M = Mn, Tc, Re) and on fac-[(CO)₂(NO)Re(H₂O)₃]²⁺ are presented. A variety of experimental NMR techniques are described and it is shown that sometimes combinations of techniques applied at variable temperature or variable pressure allowed to measure exchange rate constants and their activation parameters as well as thermodynamic parameters. Furthermore, the use of uncommon nuclei for NMR like ¹⁷O or ⁹⁹Tc extends considerably the range of applications especially in aqueous solutions when ¹H NMR is often not very useful.Tricarbonyl triaqua complexes of technetium(I) and rhenium(I) became important precursors for a variety of radiopharmaceuticals under development. It has been shown that the fac-[(CO)₃M]-unit is kinetically inert and that water molecules bound to it can be easily replaced. Reactivity of the Re^I complexes is one to two orders of magnitude slower than its Tc^I analogues. Furthermore, it shows a marked acidity dependence which has not been observed for Tc^I and Mn^I species.     

Characterization of AMA1-RON2L complex with native gel electrophoresis and capillary isoelectric focusing

Rhoptry neck protein 2 (RON2) binds to the hydrophobic groove of apical membrane antigen 1 (AMA1), an interaction essential for invasion of red blood cells (RBCs) by Plasmodium falciparum (Pf) parasites. Vaccination with AMA1 alone has been shown to be immunogenic, but unprotective even against homologous challenge in human trials. However, the AMA1-RON2L (L is referred to as the loop region of RON2 peptide) complex is a promising candidate, as preclinical studies with Freund's adjuvant have indicated complete protection against lethal challenge in mice and superior protection against virulent infection in Aotus monkeys. To prepare for clinical trials of the AMA1-RON2L complex, identity and integrity of the candidate vaccine must be assessed, and characterization methods must be carefully designed to not dissociate the delicate complex during evaluation. In this study, we developed a native Tris-glycine gel method to separate and identify the AMA1-RON2L complex, which was further identified and confirmed by Western blotting using anti-AMA1 monoclonal antibodies (mAbs 4G2 and 2C2) and anti-RON2L polyclonal Ab coupled with mass spectrometry. The formation of complex was also confirmed by Capillary Isoelectric Focusing (cIEF). A short-term (48 h and 72 h at 4°C) stability study of AMA1-RON2L complex was also performed. The results indicate that the complex was stable for 72 h at 4°C. Our research demonstrates that the native Tris-glycine gel separation/Western blotting coupled with mass spectrometry and cIEF can fully characterize the identity and integrity of the AMA1–RON2L complex and provide useful quality control data for the subsequent clinical trials.