Synthesis of organometallic Ru(II) and Fe(II) complexes containing fused rings hemi-helical ligands as chromophores. Evaluation of non-linear optical properties by HRS

A new family of three-legged piano stool structured organometallic compounds containing the fragment η⁵-cyclopentadienyl-ruthenium(II)/iron(II) has been synthesized to evaluate the existence of electronic metal to ligand charge transfer upon coordination of the novel benzodithiophene ligands (BDT), benzo[1,2-b;4,3-b′]dithiophen-2-carbonitrile (L1) and benzo[1,2-b;4,3-b′]dithiophen-2′nitro-2-carbonitrile (L2). All the compounds were characterized by ¹H, ¹³C, ³¹P NMR, IR and UV-Vis. spectroscopies and their electrochemistry studied by cyclic voltammetry. The X-ray structures of [Ru(η⁵-C₅H₅)(PPh₃)₂(NCC₁₀H₅S₂)][PF₆] (1Ru), [Ru(η⁵-C₅H₅)(PPh₃)₂(NCC₁₀H₅S₂)][CF₃SO₃] (1′Ru), [Ru(η⁵-C₅H₅)(DPPE)(NCC₁₀H₅S₂)][PF₆] 2Ru and [Fe(η⁵-C₅H₅)(DPPE)(NCC₁₀H₅S₂)][PF₆] (2Fe) were determined by X-ray diffraction showing centric crystallization on groups and P2₁/n, respectively.Quadratic hyperpolarizabilities (β) of some of the complexes (2Fe, 2Ru and 3Fe) have been determined by hyper-Rayleigh scattering (HRS) measurements at a fundamental wavelength of 1500 nm, to minimize the probability of fluorescence due to two-photon absorption and to reduce the effect of resonance enhancement, in order to estimate static β values.     

Synthesis and structural characterization of ruthenium(II) and iron(II) complexes containing 1,2-di-(2-thienyl)-ethene derived ligands as chromophores

A new family of three-legged piano stool structured organometallic compounds containing the η⁵-cyclopentadienylruthenium(II)/iron(II) fragments {M(η⁵-C₅H₅) (DPPE)}⁺, {Ru(η⁵-C₅H₅)(PPh₃)₂}⁺ and {Ru(η⁵-C₅H₅)(TMEDA)}⁺ with coordinated thiophene based chromophores, namely 5-(2-thiophen-2-yl-vinyl)-thiophene-2-carbonitrile (L1) and 5-[2-(5-Nitro-thiophen-2-yl)-vinyl]-thiophene-2-carbonitrile (L2) has been synthesized and fully characterized by ¹H, ¹³C, ³¹P NMR, IR and UV-Vis spectroscopies. Also, electrochemical studies were carried out by cyclic voltammetry and all experimental data are interpreted and compared with related compounds under the scope of NLO properties. Compounds [Ru(η⁵-C₅H₅)(DPPE)(NC(C₄H₂S)C(H)C(H)(C₄H₃S))][CF₃SO₃] (1′Ru) [Fe(η⁵-C₅H₅)(DPPE)(NC(C₄H₂S)C(H)C(H)(C₄H₃S))] [PF₆] (1Fe) and [Ru(η⁵-C₅H₅)(DPPE)(NC(C₄H₂S)C(H)C(H)(C₄H₂S)NO₂)][CF₃SO₃] (4′Ru) were also crystallographically characterized.     

Highly electrochemiluminescent Ru(II) complexes containing 1,3-dihydro-1,1,3,3-tetramethyl-7,8-diazacyclopenta[1]phenanthren-2-one ligand

A series of new ruthenium(II) complexes containing 1,3-dihydro-1,1,3,3-tetramethyl-7,8-diazacyclopenta[1]phenanthren-2-one (DTDP) ligand, such as [Ru(DTDP)_n(L)_3−n]²⁺ (L = 2,2′-bipyridyl (bpy), 4,4′-dimethyl-2,2′-bipyridyl (dmbpy), o-phenanthroline (o-phen), 5-chloro-o-phenanthroline (o-phen-Cl), 2,2′-bipyridine-4,4′-dicarboxaldehyde (bpy-(CHO)₂), n = 1, 2, 3) were synthesized and examined as ECL materials. All the complexes were characterized in terms of electrochemical redox potential and relative ECL intensity, and were compared to the well-known tris(o-phenanthroline) ruthenium(II) complex. Most of the synthesized Ru(II) complexes containing the DTDP ligand exhibited more intense ECL emissions than [Ru(o-phen)₃]²⁺. In particular, the ECL intensities of [Ru(DTDP)(o-phen)₂]²⁺ and [Ru(DTDP)(bpy-(CHO)₂)₂]²⁺ were observed to be as high as 9-fold and 20-fold greater, respectively, than the ECL intensity of [Ru(o-phen)₃]²⁺.     

Synthesis and structural characterization of novel zinc(II) and cadmium(II) complexes with pyridine-phosphine chalcogenide ligands

New pyridine-phosphine chalcogenide ligands, tris[2-(2-pyridyl)ethyl]phosphine sulfide 1a and tris[2-(2-pyridyl)ethyl]phosphine selenide 1b, react with zinc(II) and cadmium(II) chlorides in EtOH at room temperature to afford complexes of compositions 2ZnCl₂·2L (2, L = 1a) and 3CdCl₂·2L (3a,b, L = 1a,b) in high yields. The solid-state structure of complexes 2, 3 has been proved by X-ray analysis data. Complex 2 is a centrosymmetric dimer, where two atoms of zinc are bonded by two bridging pyridine-phosphine sulfide ligands through N atoms. Complexes 3a,b exist as polymeric chains with each bridging ligand acting as a chelate N,S- or N,Se-donor to one cadmium(II) center and as a pyridine N-donor to the next cadmium(II) center.     

Effect of the ancillary ligands on the binding of ruthenium(II) complexes [Ru(dmp)2(MCMIP)]2+ and [Ru(dmb)2(MCMIP)]2+ with DNA

Two polypyridine ruthenium(II) complexes, [Ru(dmp)₂(MCMIP)]²⁺ (1) (MCMIP = 2-(6-methyl-3-chromonyl)imidazo[4,5-f][1,10]-phenanthroline, dmp = 2,9-dimethyl-1,10-phenanthroline) and [Ru(dmb)₂(MCMIP)]²⁺ (2) (dmb = 4,4′-dimethyl-2,2′-bipyridine), have been synthesized and characterized by elemental analysis, ES-MS and ¹H NMR. The DNA-binding behaviors of these complexes were investigated by electronic absorption titration, fluorescence spectroscopy, viscosity measurements and thermal denaturation. The results show that 1 and 2 effectively bind to CT-DNA; the DNA-binding affinities are closely related to the ancillary ligand.     

Complexation of N-bis[2-(1,2-dicarboxyethoxy)ethyl]aspartic acid with Fe(II), Co(II), and Ni(II) in aqueous solution

In a search for environment-friendly metal chelating ligands for industrial applications, the protonation and complex formation equilibria of N-bis[2-(1,2-dicarboxyethoxy)ethyl]aspartic acid (BCA6) with Fe(II), Co(II), and Ni(II) ions in aqueous 0.1 M NaCl solution were studied at 25°C by potentiometric titration. The model for complexation and the stability constants of different complexes were determined for each metal ion using SUPERQUAD. In all cases, complex formation was dominated by stable ML^4? complexes.     

A contribution to 1-azapentadienylmetal chemistry: Si, Sn(II), Fe(II) and Co(II) complexes

Complexes of three related 1-azapentadienyl ligands [N(SiMe₂R¹)C(Bu^t)(CH)₃SiMe₂R]⁻, abbreviated as L (R = Bu^t, R¹ = Me), L′ (R = Me = R¹), and L″ (R = Bu^t = R¹), are described. The crystalline compounds Sn(L)₂ (1), Sn(L′)₂ (2), [Sn(L′)(μ-Cl)]₂ (3) and [Sn(L″)(μ-Cl)]₂ (4) were prepared from SnCl₂ and 2 K(L), 2 K(L′), K(L′) and K(L″), respectively, in thf. Treatment of the appropriate lithium 1-azapentadienyl with Si(Cl)Me₃ yielded the yellow crystalline Me₃Si(L) (5) and the volatile liquid Me₃Si(L′) (6) and Me₃Si(L″) (7), each being an N,N,C-trisilyldieneamine. The red, crystalline Fe(L)₂ (8) and Co(L′)₂ (9) were obtained from thf solutions of FeCl₂ with 2 Li(L)(tmeda) and CoCl₂ with 2 K(L′), respectively. Each of 1-9 gave satisfactory C, H, N analyses; 6 and 7 (GC-MS) and 1, 2, 8 and 9 (MS) showed molecular cations and appropriate fragments (also 3 and 4). The ¹H, ¹³C and ¹¹⁹Sn NMR (1-4) and IR spectra support the assignment of 1-4 as containing Sn-N(SiMe₂R¹)-C(Bu^t)(CH)₃SiMe₂R moieties and 5-7 as N(SiMe₃)(SiMe₂R¹)C(Bu^t)(CH)₃SiMe₂R molecules; for 1-4 this is confirmed by their X-ray structures. The magnetic moments for 8 (5.56 μ_B) and 9 (2.75 μ_B) are remarkably close to the appropriate Fe and Co complex [M{η³-N(SiMe₃)C(Bu^t)C(H)SiMe₃}₂]; hence it is proposed that 8 and 9 have similar metal-centred, centrosymmetric, distorted octahedral structures.     

Ethynyl[2.2]paracyclophanes and 4-isocyano[2.2]paracyclophane as ligands in organometallic chemistry

An alternative synthesis of (±)-4-ethynyl[2.2]paracyclophane (PCPCCH) (5) and 4,16-diethynyl[2.2]paracyclophane (6) via the Corey-Fuchs reaction has been developed. The olefinic intermediate 4-dibromovinyl[2.2]paracyclophane (3) has been isolated and structurally characterized. The racemic terminal alkyne 5 was employed as starting material for assembling of a luminescent extended π-conjugated system containing a thiophene unit and for a catalytic bis-silylation reaction yielding the olefinic dithioether Z-PhSCH₂Me₂SiC(H)C(PCP)SiMe₂CH₂SPh (9). The dimetallatetrahedran [Co₂(CO)₆(μ-η²-PCP-CCH)] (10) has been prepared and its crystal structure determined by an X-ray diffraction analysis. Alkyne 5 has also been used for the preparation of the Pt(0) complex [Pt(PPh₃)₂(PCPCCH)] (11) and the heterodinuclear dimetallacyclopentenone [(OC)₂Fe{μC(O)C(PCP)C(H)}(μ-dppm)Pt(PPh₃)] (12). The synthesis and reactivity of 4-isocyano[2.2]paracyclophane (15) towards heterobimetallic iron-platinum and palladium-platinum complexes is also presented. Opening of the dative iron → platinum bond of [(OC)₄Fe(μ-dppm)PtCl₂] (16) occurred upon addition of 15 to a CH₂Cl₂ solution of 16 leading to [(OC)₄Fe{μ-dppm}PtCl₂(CNPCP)] (17). Treatment of [ClPd(μ-dppm)₂PtCl] (18) with isocyanide 15 in a 1:1 ratio affords the A-frame compound [ClPd(μ-dppm)₂(μ-CNPCP)PtCl] (19), resulting from formal insertion of 15 into the Pd-Pt bond. Addition of 2 equiv. of 15-18 leads to the ionic A-frame compound [ClPd(μ-dppm)₂(μ-CNPCP)Pt(CNPCP)]Cl (20).     

Heteroleptic half-sandwich Ru(II), Rh(III) and Ir(III) complexes based on 5-ferrocenyldipyrromethene

The synthesis and characterization of heteroleptic complexes with the formulations [(η⁶-arene)RuCl(fcdpm)] (η⁶-arene = C₆H₆, C₁₀H₁₄) and [(η⁵-C₅Me₅)MCl(fcdpm)] (M = Rh, Ir; fcdpm = 5-ferrocenyldipyrromethene) have been reported. All the complexes have been characterized by elemental analyses, IR, ¹H NMR and electronic spectral studies. Structures of [(η⁶-C₆H₆)RuCl(fcdpm)] and [(η⁶-C₁₀H₁₄)RuCl(fcdpm)] have been determined crystallographically. Chelating monoanionic linkage of fcdpm to the respective metal centres has been supported by spectral and structural studies. Further, reactivity of the representative complex [(η⁶-C₁₀H₁₄)RuCl(fcdpm)] with ammonium thiocyanate (NH₄SCN) and triphenylphosphine (PPh₃) have been examined.     

From alkenylphosphane aminoallenylidene ruthenium(II) complexes to highly unsaturated ruthenaphosphabicycloheptene complexes

The alkenylaminoallenylidene complex [Ru(η⁵-C₉H₇){CCC(NEt₂)[C(Me)CPh₂]}{κ(P)-Ph₂PCH₂CHCH₂}(PPh₃)][PF₆] (2) has been prepared by the reaction of the allenylidene [Ru(η⁵-C₉H₇)(CCCPh₂){κ(P)-Ph₂PCH₂CHCH₂}(PPh₃)][PF₆] (1) with the ynamine MeCCNEt₂. The reaction proceeds regio- and stereoselectively, and the insertion of the ynamine takes place exclusively at the C_βC_γ bond of the unsaturated chain. The secondary allenylidene [Ru(η⁵-C₉H₇){CCC(H)[C(Me)CPh₂]}{κ(P)-Ph₂PCH₂CHCH₂}(PPh₃)][PF₆] (3) is obtained, in a one-pot synthesis, from the reaction of aminoallenylidene 2 with LiBHEt₃ and subsequent treatment with silica. Moreover, the addition of an excess of NaBH₄ to a solution of the complex 2 in THF at room temperature gives exclusively the alkynyl complex [Ru(η⁵-C₉H₇){CCCH₂[C(Me)CPh₂]}{κ(P)-Ph₂PCH₂CHCH₂}(PPh₃)] (5). The heating of a solution of allenylidene derivative 3 in THF at reflux gives regio- and diastereoselectively the cyclobutylidene complex [Ru(η⁵-C₉H₇) (PPh₃)][PF₆](4) through an intramolecular cycloaddition of the CC allyl and the C_αC_β bonds in the allenylidene complex 3. The structure of complex 4 has been determined by single crystal X-ray diffraction analysis.     

Synthesis,spectroscopic characterization,and antimicrobial activities of Ni(II) and Fe(II) complexes with N-(2-hydroxyethyl)-5-nitrosalicylaldimine

Metal complexes [Ni(HL1)₂H₂O] (1) and [Fe(HL1)₂] (2), where HL1 is the tridentate Schiff base N-(2-hydroxyethyl)-5-nitrosalicylaldimine, were synthesized and characterized by spectroscopic methods. The crystal structures of 1 and 2 have been determined by single crystal diffraction at 100?K. Complexes 1 and 2 have a distorted octahedral geometry. The ligand and metal complexes were screened for antibacterial and antifungal activities by the disk diffusion, microdilution broth, and single spore culture techniques. Antimicrobial activities of the ligand and its complexes have been tested against 10 bacteria, two yeast, and five filamentous fungi. The ligand and metal complexes were found to be active against all tested micro-organisms.     

Complexation of N-bis[2-(1,2-dicarboxyethoxy)ethyl]aspartic acid with Cd(II), Hg(II) and Pb(II) ions in aqueous solution

The persistence of widely used chelating agents EDTA and DTPA in nature has been of concern and there is a need for ligands to replace them. In a search for environmentally friendly metal chelating ligands for industrial applications, complex formation equilibria of N-bis[2-(1,2-dicarboxyethoxy)ethyl]aspartic acid (BCA6) with Cd(II), Hg(II) and Pb(II) in aqueous 0.1 M NaNO₃ solution were studied at 25°C by potentiometric titration. Complexation was modeled and the stability constants of the different complexes were determined for each metal ion using the computer program SUPERQUAD. With all metal ions, stable ML^4? complexes dominated the complex formation. The stabilities of Cd(II), Hg(II) and Pb(II) chelates of BCA6 are remarkably lower than those of EDTA and DTPA. Environmental advantages of the use of BCA6 instead of EDTA and DTPA are better biodegradability and lower nitrogen content with a possibility to save chemicals and process steps in pulp bleaching.     

Synthesis of pillar[7]arene

The first synthesis of pillar[7]arene is reported with two methods.Method A:the FeCl₃-catalyzed condensation reaction of 1,4- dimethoxybenzene（1） with paraformaldehyde in CHCl₃ gave dimethoxypillar[7]arene（3）.Method B:the p-toluenesulfonic acid catalyzed condensation reaction of 2,5-bis（benzyloxymethyl）-1,4-dimethoxybenzene（2） in CH₂Cl₂ gave compound 3.Demethylation of 3 with BBr₃ gave pillar[7]arene（4）.The pillar[7]arene might be a perspective macrocyclic host in host-guest chemistry.     

Thermogravimetric investigation of thermal decomposition of copper(II) complexes with methylpyrido[2,3-d]imidazole derivatives

Solid-state complexes with the formulae CuL _x X₂·nH₂O, wereL=2-methyl-, 5-methyl-, or 7-methylpyrido[2,3-d]imidazole,X=NO ₃ ^– or Cl^–,x=2 or 3, andn=1 or 2, were subjected to thermogravimetric analyses. The kinetic parameters were calculated according to the Coats-Redfern method. Reactions paths are proposed and their agreement with the data obtained from TG curves is checked.The authors thank Dr. W. Surga for XRD analyses, and Dr. B. Kowalczyk and Dr. M. Czerwinski from the Pedagogical University in Czestochowa for providing access to the computer application allowing calculation of the kinetic parameters.     

Lower rim amide (1,3) functionalised calix[4]arene amido-thiourea derivatives as dimetallic Zn(II) coordination complexes for anion recognition/sensing

The synthesis of two amido-thiourea based receptors/sensors 1 and 2, formed by functionalisation of the lower rim of a calix[4]arene, and the photophysical analysis of these with Zn(II) and various anions is described. The two structures, differing by the substituent on the thiourea moiety, were found to bind Zn(II) effectively in ethanol (EtOH); the recognition giving rise to significant changes in the UV-vis absorption spectra, which was red-shifted for both chemosensors. The changes in the absorption spectra were further analysed using nonlinear regression analysis programme (using the global analysis software ReactLab? Equilibria), which revealed high binding constants for both systems. The resulting dimetallic complexes (1,2)–Zn₂ were (pre-formed and) then used to coordinate anionic species such as AcO^? , H₂PO₄^?  and Br^?  through electrostatic interactions, showing high affinity towards these anions. In all cases, nonlinear regression analysis showed both 1:1 or 1:2 sensor:anion depending on the anion used. Although the 2-Zn₂ complex showed high affinity for acetate, phosphate and bromide, the 1-Zn₂ complex showed selectivity towards the recognition of phosphate in EtOH.     

Spectroscopic,structure, and DFT studies of cationic palladium(II) complexes with imidazole derivative ligands

Two palladium(II) complexes with imidazole derivative ligands have been synthesized. The molecular structures of the complexes were determined by X-ray crystallography and their spectroscopic properties were studied. Based on the crystal structures, computational investigations were carried out to determine the electronic structures of the complexes. The electronic spectra were calculated with use of time-dependent DFT method, and the transitions were correlated with the molecular orbitals of the complexes. The emission of the complex with 1-methylimidazole was examined.     

Preparation of iron carbonyl complexes of germanium(II) and tin(II) each with a terminal fluorine atom

The reaction of β-diketiminate substituted germanium(II) and tin(II) fluorides (LGeF (1) and LSnF (2)) (L = CH{(CMe)₂(2,6-iPr₂C₆H₃N)₂}) with diiron nonacarbonyl, Fe₂(CO)₉ at room temperature, leads to the iron carbonyl complexes of germanium(II) LGeFFe(CO)₄ (3) and tin(II) LSnFFe(CO)₄ (4), respectively. Compounds 3 and 4 were characterized by elemental analysis, NMR spectroscopy, and mass spectrometry. Furthermore, both complexes (3 and 4) were investigated by X-ray structural analysis which shows that both compounds are monomeric in the solid state containing terminal fluorine atoms.     

Tris-chelate complexes with chiral ligands: In search of diastereoisomeric selectivity with remote stereogenic centres

The chiral ligands, 4,4′-bis{(1S,2R,4S)-(−)-bornyloxy}-2,2′-bipyridine, (1S,2R,4S)-1, and 4,4′-bis{(1R,2S,4R)-(+)-bornyloxy}-2,2′-bipyridine, (1R,2S,4R)-1, have been prepared and characterized by spectroscopic techniques and, for (1S,2R,4S)-1, by single crystal X-ray diffraction. Despite the use of enantiomerically pure ligands, the formation of the complexes [Fe((1S,2R,4S)-1)₃]²⁺, [Ru((1S,2R,4S)-1)₃]²⁺, [Ru((1S,2R,4S)-1)(bpy)₂]²⁺ and [Ru((1R,2S,4R)-1)(bpy)₂]²⁺ proceeds without preference for either the Δ or Λ-diastereoisomers.     

Isolated supramolecular [Ru(bpy)3]-viologen-[Ru(bpy)3] complexes with trapped CB[7,8] and photoinduced electron-transfer study in nonaqueous solution

The synthesis of two supramolecular diruthenium complexes, 1 ?CB[7] and 1 ?CB[8] (CB[n]=cucurbit[n]uril), which contain the respective host CB[7] and CB[8], were synthesized and isolated. In the case of host CB[8], the desired supramolecular complex was obtained by utilizing dihydroxynapthalene as a template during the synthesis. The ¹H NMR spectra, electrochemistry, and photochemistry of these supramolecular complexes were performed in nonaqueous solution. The results show that both CB[7,8] hosts mainly bind to the linker part in solution in acetonitrile. This binding also lowers the oxidation potential of the ruthenium metal center and hinders the quenching effect by the viologen moiety. It has also been shown that external methylviologen can be included into 1 ?CB[8]. Analysis with NMR spectroscopy, electrochemistry, and photochemistry clearly shows a viologen radical dimer formation between the bound viologen and free methylviologen, thereby showing that the unique abilities of the CB[8] host can be utilized even in nonaqueous solution.     

Comparative study on the photophysical properties between carbene-based Fe (II) and Ru (II) complexes

The comparative study on the photophysical properties between cheap metal Fe (II) complexes and noble metal Ru (II) complexes with identical ligand coordination is performed by the combination of density functional theory (DFT) and time-dependent density functional theory (TDDFT) to evaluate the potential alternative applications of Fe (II) complexes. RuBIP (BIP = 2,6-bis (imidazol-2- ylidene)pyridine) is theoretically established that the radiative lifetime of the second lowest triplet state is more consistence with experimental value. However, FeBIP retains nonluminous because of low-lying ³MC originated from weak d orbital splitting. FeBIPC (FeBIP with carboxylic acid groups) has twice longer lifetime than its parent complex FeBIP due to the great decrease of the energy gap between ³MLCT and ³MC. What's more, the lifetimes of Fe (II) complexes detected in the experiments are more accessible to nonradiative decay lifetimes of ³MC. The carboxylic acid groups are beneficial for the improvement of luminescent possibility and controllability of Fe (II) complexes, while there is still a huge challenge for effective material replacement comparing with Ru (II) complexes.