Rhenium(I) and technetium-99m(I) fac-tricarbonyl complexes with 4-(imidazolin-2-yl)-3-thiabutanoic acid derivatives as tridentate ligands: Synthesis and structural characterization

Two rhenium(I) tricarbonyl complexes, with the monoanionic tridentate NSO type ligand, 4-(imidazolin-2-yl)-3-thiabutanoic acid and 4-(N-ethylimidazolin-2-yl)-3-thiabutanoic acid were synthesized and isolated in pure form. Both complexes were characterized by spectroscopic methods and elemental analysis. The solid-state structure of 4-(imidazolin-2-yl)-3-thiabutanoic acid and of both complexes was established by X-ray crystallography. The geometry about the rhenium is octahedral. The analogous technetium-99m complexes were also prepared quantitatively by the reaction of both ligands with the fac-[^99mTc(CO)₃(H₂O)₃]⁺ synthon and their identity was established by chromatographic comparison to their rhenium congeners.     

Rhenium(I) and technetium(I) fac-M(NSO)(CO)3 (M = Re,Tc) tricarbonyl complexes,with a tridentate NSO bifunctional agent: Synthesis,structural characterization,and radiochemistry

The synthesis and structural characterization of the neutral rhenium complex fac-[Re(NSO)(CO)₃], Re-1, where (NSO) is a tridentate bifunctional chelating agent, 3-(carboxymethylthio)-3-(1H-imidazol-4-yl)propanoic acid (1), is presented. The complex crystallized from methanol–water and its structure was assigned by IR and ¹H, ¹³C NMR spectroscopies and X-ray crystallography. Furthermore, the analogous technetium complex fac-[^99mTc(NSO)(CO)₃], ^99mTc-1, was synthesized in high yield by reacting ligand 1 with the fac-[^99mTc(OH₂)₃(CO)₃]⁺ precursor for 30 min at 85 °C. The tracer complex was found to be more than 95% stable in the L-histidine challenge experiment. Our data indicate that the bifunctional NSO chelating agent 1 can be successfully applied for the development of potential ^99mTc-radiopharmaceuticals.     

Coordination of bidentate aniline derivatives to the fac-[Re(CO)3] core

A series of rhenium(I) tricarbonyl complexes, containing bidentate derivatives of aniline, was synthesized and structurally characterized. With 1,2-diaminobenzene (Hpda) the ‘2+1’ complex salt fac-[Re(CO)₃(Hpda)₂]Br was isolated. The neutral complex [Re(CO)₃(Hapa)Br] was formed with 2-aminodiphenylamine (Hapa) as ligand. 2-Aminophenol (Hopa) also produced the neutral ‘2+1’ complex [Re(CO)₃(opa)₂(Hopa)], but with 2-mercaptophenol (Hspo) the bridged dimer [Re₂(CO)₇(spo)₂] was found. In the complex [Re(CO)₃(Htpn)Br] (Htpn = N′-{(2-methylthio)benzylidene}benzene-1,2-diamine) the potentially tridentate ligand Htpn is coordinated via the methylthio sulfur and imino nitrogen atoms only, with a free amino group.     

Aqueous syntheses of [(Cp-R)M(CO)3] type complexes (Cp = cyclopentadienyl, M = Mn, Tc, Re) with bioactive functionalities

We describe reactions of [^99mTc(H₂O)₃(CO)₃)]⁺ (1) with Diels-Alder products of cyclopentadiene such as “Thiele’s acid” (HCp-COOH)₂ (2) and derivatives thereof in which the corresponding [(Cp-COOH)^99mTc(CO)₃)] (3) complex did form in water. We propose a metal mediated Diels-Alder reaction mechanism. To show that this reaction was not limited to carboxylate groups, we synthesized conjugates of 2 (HCp-CONHR)₂ (4a-c) (4a, R = benzyl amine; 4b, R = N_α-Boc-l-2,3-diaminopropionic acid and 4c, R = glycine). The corresponding ^99mTc complexes [(4a)^99mTc(CO)₃)] 6a, [(4b)^99mTc(CO)₃)] 6b and [(4c)^99mTc(CO)₃)] 6c have been prepared along the same route as for Thiele’s acid in aqueous media demonstrating the general applicability of this synthetic strategy. The authenticity of the ^99mTc complexes on the no carrier added level have been confirmed by chromatographic comparison with the structurally characterized manganese or rhenium complexes.Studies of the reaction of 1 with Thiele’s acid bound to a solid phase resin demonstrated the formation of [(Cp-COOH)^99mTc(CO)₃)] 3 in a heterogeneous reaction. This is the first evidence for the formation of no carrier added ^99mTc radiopharmaceuticals containing cyclopentadienyl ligands via solid phase syntheses. Macroscopically, the manganese analogue 5a and the rhenium complexes 5b-c have been prepared and characterized by IR, NMR, ESI-MS and X-ray crystallography for 5a (monoclinic, P2₁/c, a = 9.8696(2) Å, b = 25.8533(4) Å, c = 11.8414(2) Å, β = 98.7322(17)°) in order to unambiguously assign the authenticity of the corresponding ^99mTc complexes.     

[M(CO)2(NO)], a new core in bioorganometallic chemistry: model complexes of [Re(CO)2(NO)] and [Tc(CO)2(NO)]

In this study selected bidentate (L²) and tridentate (L³) ligands were coordinated to the Re(I) or Tc(I) core [M(CO)₂(NO)]²⁺ resulting in complexes of the general formula fac-[MX(L²)(CO)₂(NO)] and fac-[M(L³)(CO)₂(NO)] (M = Re or Tc; X = Br or Cl). The complexes were obtained directly from the reaction of [M(CO)₂(NO)]²⁺ with the ligand or indirectly by first reacting the ligand with [M(CO)₃]⁺ and subsequent nitrosylation with [NO][BF₄] or [NO][HSO₄]. Most of the reactions were performed with cold rhenium on a macroscopic level before the conditions were adapted to the n.c.a. level with technetium (^99mTc). Chloride, bromide and nitrate were used as monodentate ligands, picolinic acid (PIC) as a bidentate ligand and histidine (HIS), iminodiacetic acid (IDA) and nitrilotriacetic acid (NTA) as tridentate ligands. We synthesised and describe the dinuclear complex [ReCl(μ-Cl)(CO)₂(NO)]₂ and the mononuclear complexes [NEt₄][ReCl₃(CO)₂(NO)], [NEt₄][ReBr₃(CO)₂(NO)], [ReBr(PIC)(CO)₂(NO)], [NMe₄][Re(NO₃)₃(CO)₂(NO)], [Re(HIS)(CO)₂(NO)][BF₄], [⁹⁹Tc(HIS)(CO)₂(NO)][BF₄], [^99mTc(IDA)(CO)₂ (NO)] and [^99mTc(NTA)(CO)₂(NO)]. The chemical and physical characteristics of the Re and Tc-dicarbonyl-nitrosyl complexes differ significantly from those of the corresponding tricarbonyl compounds.     

Synthesis,spectroscopic investigation,structural characterization and DFT calculation of the complexes [ReX2(N2COPh)(4-PhPyr)(PPh3)2] (X = Cl, Br)

The reactions of [ReX₂(η²-N₂COPh-N′,O)(PPh₃)₂] with 4-phenylpyrimidine have been performed. As a result, the two complexes [ReX₂(N₂COPh)(4-PhPyr)(PPh₃)₂] (X = Cl, Br) (4-PhPyr = 4-phenylpyrimidine), isostructural in the solid state, have been obtained. The crystal and molecular structures of ([ReCl₂(N₂COPh)(4-PhPyr)(PPh₃)₂])₂·CHCl₃ (1) and ([ReBr₂(N₂COPh)(4-PhPyr)(PPh₃)₂])₂·CHCl₃ (2) have been determined. The electronic structure of [ReCl₂(N₂COPh)(4-PhPyr)(PPh₃)₂] has been examined using the density functional theory (DFT) method. The spin-allowed electronic transitions of 1 have been calculated with the time-dependent DFT method, and the UV–Vis spectrum of [ReCl₂(N₂COPh)(4-PhPyr)(PPh₃)₂] has been discussed on this basis.     

Some complexes containing carbon chains end-capped by M(CO)2Tp′ [M = Mo, W; Tp′ = HB(pz)3, HB(dmpz)3] groups

Complexes M(CCCSiMe₃)(CO)₂Tp′ (Tp′ = Tp [HB(pz)₃], M = Mo 2, W 4; Tp′ = Tp^∗ [HB(dmpz)₃], M = Mo 3) are obtained from M(CCCSiMe₃)(O₂CCF₃)(CO)₂(tmeda) (1) and K[Tp′].Reactions of 2 or 4 with AuCl(PPh₃)/K₂CO₃ in MeOH afforded M{CCCAu(PPh₃)}(CO)₂Tp′ (M = Mo 5, W 6) containing C₃ chains linking the Group 6 metal and gold centres.In turn, the gold complexes react with Co₃(μ₃-CBr)(μ-dppm)(CO)₇ to give the C₄-bridged {Tp(OC)₂M}CCCC{Co₃(μ-dppm)(CO)₇} (M = Mo 7, W 8), while Mo(CBr)(CO)₂Tp^∗ and Co₃{μ₃-C(CC)₂Au(PPh₃)}(μ-dppm)(CO)₇ give {Tp^∗(OC)₂Mo}C(CC)₂C{Co₃(μ-dppm)(CO)₇} (9) via a phosphine-gold(I) halide elimination reaction. The C₃ complexes Tp′(OC)₂MCCCRu(dppe)Cp^∗ (Tp′ = Tp, M = Mo 10, W 11; Tp′ = Tp^∗, M = Mo 12) were obtained from 2-4 and RuCl(dppe)Cp^∗ via KF-induced metalla-desilylation reactions. Reactions between Mo(CBr)(CO)₂Tp^∗ and Ru{(CC)_nAu(PPh₃)}(dppe)Cp^∗ (n = 2, 3) afforded {Tp^∗(OC)₂Mo}C(CC)_n{Ru(dppe)Cp^∗} (n = 2 13, 3 14), containing C₅ and C₇ chains, respectively. Single-crystal X-ray structure determinations of 1, 2, 7, 8, 9 and 12 are reported.     

Evaluation of two chelators for labelling a PNA monomer with the fac-[Tc(CO)3] moiety

A PNA monomer containing thymine as nucleobase (1) was synthesized, characterized and coupled to the pyrazolyl containing ligand 3,5-Me₂pz(CH₂)₂N((CH₂)₃COOH)(CH₂)₂NHBoc (2) and to a modified cysteine S-(carboxymethyl-pentafluorphenyl)-N-[(trifluor)carbonyl]-l-cysteine methyl ester (3) yielding the bifunctional chelators 6 and 7, respectively. Reactions of 6 and 7 with the Re(I) tricarbonyl starting material [Re(CO)₃(H₂O)₃]Br afforded the complexes fac-[Re(CO)₃(κ³-6)]⁺ (8) and fac-[Re(CO)₃(κ³-7)] (9), respectively. The identity of 8 and 9 has been established based on IR spectroscopy, elemental analysis, ESI-MS spectrometry and HPLC. The multinuclear NMR spectroscopy (¹H, ¹³C, g-COSY, g-HSQC) has also been very informative in the case of complex 8, showing the presence of rotamers in solution. For 9 the NMR spectrum was too complex due to the presence of rotamers and diastereoisomers. The radioactive congeners of complexes 8 and 9, fac-[^99mTc(CO)₃(κ³-6)]⁺ (8a) and fac-[^99mTc(CO)³(κ³-7)] (9a), have been prepared by reacting the precursor fac-[^99mTc(CO)₃(H₂O)₃]⁺ with the corresponding ligands being their identity established by comparing their HPLC chromatograms with the HPLC of the rhenium surrogates.     

Isolation of fac-[Re(CO)3(HMPA)3][BF4]. Structural characterization of a key cationic intermediate in the exchange reaction between [Re(CO)6][BF4] and acetylferrocene. Implications in radiopharmaceutical chemistry

[Re(CO)₆][BF₄] reacts with HMPA to form [Re(CO)₃(HMPA)₃][BF₄] (4), whose structure was determined by X-ray crystallography and proves to be a key intermediate in the ligand exchange reaction between three CO and Cp; and may be related to other cations such as [Re(CO)₃(H₂O)₃]⁺, [Re(CO)₃(CH₃CN)₃]⁺, [Re(CO)₃(DMSO)₃]⁺, obtained by different ways, and important in the field of organometallic radiopharmaceuticals.     

Quantum chemical study of ethylene addition to group-7 oxo complexes MO2(CH3)(CH2) (M = Mn, Tc, Re)

Quantum chemical calculations using DFT at the B3LYP level have been carried out for the reaction of ethylene with the group-7 compounds ReO₂(CH₃)(CH₂) (Re1), TcO₂(CH₃)(CH₂) (Tc1) and MnO₂(CH₃)(CH₂) (Mn1). The calculations suggest rather complex scenarios with numerous pathways, where the initial compounds Re1-Mn1 may either engage in cycloaddition reactions or numerous addition reactions with concomitant hydrogen migration. There are also energetically low-lying rearrangements of the starting compounds to isomers which may react with ethylene yielding further products. The [2 + 2]_Re,C cycloaddition reaction of the starting molecule Re1 is kinetically and thermodynamically favored over the [3 + 2]_C,O and [3 + 2]_O,O cycloadditions. However, the reaction which leads to the most stable product takes place with initial rearrangement to the dioxohydridometallacyclopropane isomer Re1a that adds ethylene with concomitant hydrogen migration yielding Re1a-1. The latter reaction has a slightly higher barrier than the [2 + 2]_Re,C cycloaddition reaction. The direct [3 + 2]_C,O cycloaddition becomes more favorable than the [2 + 2]_M,C reaction for the starting compounds Tc1 and Mn1 of the lighter metals technetium and manganese but the calculations predict that other reactions are kinetically and thermodynamically more favorable than the cycloadditions. The reactions with the lowest activation barriers lead after rearrangement to the ethyl substituted dioxometallacyclopropanes Tc1a-1 and Mn1a-1. The manganese compound exhibits an even more complex reaction scenario than the technetium compounds. The thermodynamically most stable final product of ethylene addition to Mn1 is the ethoxy substituted metallacyclopropane Mn1a-2 which has, however, a high activation barrier.     

Reductive elimination reaction of rhenium complexes trans-(η-C5Me5)Re(CO)2(chloroaryl)Cl

Thermal reaction of the chloroaryl-chloride complexes trans-(η⁵-C₅Me₅)Re(CO)₂(Ar^Cl)Cl (Ar^Cl = 3-ClC₆H₄, 3-ClC₆H₃(4-Me) and 3,5-Cl₂C₆H₃) in acetonitrile did not interconvert to the cis isomer, instead the complex ReCl(CO)₂(NCMe)₃ and the corresponding 5-Ar^Cl-1,2,3,4,5-pentamethylcyclopentadiene were formed. Similar reductive elimination products were obtained when the starting rhenium complexes were reacted with trimethylphosphite in toluene.     

Synthesis, characterization, protonation studies and X-ray crystal structure of ReH5(PPh3)2(PTA) (PTA = 1,3,5-triaza-7-phosphaadamantane)

The novel rhenium pentahydride complex [ReH₅(PPh₃)₂(PTA)] (2) was synthesized by dihydrogen replacement from the reaction of [ReH₇(PPh₃)₂] with PTA in refluxing THF. Variable temperature NMR studies indicate that 2 is a classic polyhydride (T_1(min) = 133 ms). This result agrees with the structure of 2, determined by X-ray crystallography at low temperature. The compound shows high conformational rigidity which allows for the investigation of the various hydride-exchanging processes by NMR methods. Reactions of 2 with equimolecular amounts of either HFIP or HBF₄ · Et₂O at 183 K afford [ReH₅(PPh₃)₂{PTA(H)}]⁺ (3) via protonation of one of the nitrogen atoms on the PTA ligand. When 5 equivalents of HBF₄ · Et₂O are used, additional protonation of one hydride ligand takes place to generate the thermally unstable dication [ReH₄(η²-H₂)(PPh₃)₂{PTA(H)}]²⁺ (4), as confirmed by ¹H NMR and T₁ analysis. IR monitoring of the reaction between 2 and CF₃COOD at low temperature shows the formation of the hydrogen bonded complex [ReH₅(PPh₃)₂{PTA?DOC(O)CF₃}] (5) and of the ionic pair [ReH₅(PPh₃)₂{PTA(D)?OC(O)CF₃}] (6) preceding the proton transfer step leading to 3.     

Reductive elimination of halogens assisted by phosphine ligands in Fe(CO)4X2 (X = I, Br) complexes

Fe(CO)₄X₂ complexes [X = I (1), Br(1′)] react with phosphine ligands L (L = PMe₃, PEt₃, PMe₂Ph, PMePh₂, PPh₃) via a two-step mechanism: in the first step fac-Fe(CO)₃LX₂ complexes are formed; in the second step two parallel pathways, a and b, are observed; in pathway a, reductive elimination with formation of equimolar amounts of Fe(CO)₃L₂ (5) and phosphonium salts [LX]⁺X⁻ is observed; in pathway b, disubstituted dihalide complexes cis,trans,cis-Fe(CO)₂L₂X₂ are formed. The relative weights of pathways a and b depend on the basicity, steric hindrance and concentration of ligand L, on the nature of the halogen and on temperature. A radical mechanism which accounts for most of the experimental results is proposed.     

Density functional theory study on structural isomers and bonding of model complexes M(CO)5(BH3 · PH3) (M = Cr, Mo, W) and W(CO)5(BH3 · AH3) (A = N, P, As, Sb)

The influence of group 15 various substituents and effect of metal centers on metal-borane interactions and structural isomers of transition metal-borane complexes W(CO)₅(BH₃ · AH₃) and M(CO)₅(BH₃ · PH₃) (A = N, P, As, and Sb; M = Cr, Mo, and W), were investigated by pure density functional theory at BP86 level. The following results were observed: (a) the ground state is monodentate, η¹, with C₁ point group; (b) in all complexes, the η¹ isomer with C_S symmetry on potential energy surface is the transition state for oscillating borane; (c) the η² isomer is the transition state for the hydrogens interchange mechanism; (d) in W(CO)₅(BH₃ · AH₃), the degree of pyramidalization at boron, interaction energy as well as charge transfer between metal and boron moieties, energy barrier for interchanging hydrogens, and diffuseness of A increase along the series A = Sb < As < P < N; (e) in M(CO)₅(BH₃ · PH₃), interaction energy is ordered as M = W > Cr > Mo, while energy barrier for interchanging hydrogens decreases in the order of M = Cr > W > Mo.     

Synthesis and characterization of metal diselenophosphates: M[Se2P(OR)2]2 (M = Pd,Pt; R = Et,Pr, Pr)

The first Pd(II) and Pt(II) complexes incorporating diselenophosphate (dsep) ligands are presented. Treatment of M(II) (M = Pd, Pt) salts with two equivalents of the dsep ligand in CH₂Cl₂ yielded square-planar compounds of the type M[Se₂P(OR)₂]₂ (M = Pd, Pt; R = Et, ⁱPr, ⁿPr) (1a–2c). These complexes were characterized by elemental analysis, multinuclear NMR spectroscopy and X-ray diffraction (1b and 2b). The dsep ligands coordinate to the metal in an approximately isobidentate fashion and form four-membered Se–P–Se–M chelate rings. Structural elucidations indicated that minute differences exist in the M–Se bond distances and these were observed from solution ³¹P NMR studies, which exhibited two sets of satellites arising from one-bond coupling to ⁷⁷Se nuclei. A packing diagram showed a chain-like motif which was composed of square-planar M[Se₂P(OR)₂]₂ units and occurred via non-covalent Se?Se secondary interactions.     

Selenium-capped trimolybdenum and tritungsten carbonyl clusters [Se2M3(CO)10] (M = Mo, W)

A facile synthesis of the novel selenium-capped trimolybdenum and tritungsten ring carbonyl clusters [Se₂M₃(CO)₁₀]²⁻ (M = Mo, 1; W, 4) have been achieved. The selenium-capped trimolybdenum cluster compound [Et₄N]₂[Se₂Mo₃(CO)₁₀] ([Et₄N]₂[1]) can be obtained from the reaction of the trichromium cluster compound [Et₄N]₂[Se₂Cr₃(CO)₁₀] with 4 equiv. of Mo(CO)₆ in refluxing acetone. On the other hand, when [Et₄N]₂[Se₂Cr₃(CO)₁₀] reacted with 4 equiv. of W(CO)₆ in refluxing acetone, the planar cluster compound [Et₄N]₂[Se₂W₄(CO)₁₈] ([Et₄N]₂[3]) was isolated, which could further transform to the tritungsten cluster compound [Et₄N]₂[Se₂W₃(CO)₁₀] ([Et₄N]₂[4]) in good yield. Alternatively, clusters 1 and 4 could be formed from the reactions of the monosubstituted products [Et₄N]₂[Se₂Cr₂M(CO)₁₀] (M = Mo; W, [Et₄N]₂[2]) with 3 equiv. of M(CO)₆ in acetone, respectively. Complexes 1-4 are fully characterized by IR, ⁷⁷Se NMR spectroscopy, and single-crystal X-ray analysis. Clusters 1, 2, and 4 are isostructural and each display a trigonal bipyramidal structure with a homometallic M₃ ring (M = Mo, 1; W, 4) or a heterometallic Cr₂W ring that is further capped above and below by μ₃-Se atoms. Further, the intermediate planar complex 3 exhibits a Se₂W₂ square with each Se atom externally coordinated to one W(CO)₅ group. This paper describes a systematic route to a series of selenium-capped trimetallic carbonyl clusters and the formation and the structural features of the resultant clusters are discussed.     

A complete series of tricarbonylhalidorhenium(I) complexes (abpy)Re(CO)3(Hal), Hal = F, Cl, Br, I; abpy = 2,2′-azobispyridine: Structures, spectroelectrochemistry and EPR of reduced forms

For the first time a complete set of tricarbonylhalidorhenium(I) complexes (Hal = F, Cl, Br, I) has been studied in a systematical fashion by example of (abpy)Re(CO)₃(Hal), abpy = 2,2′-azobispyridine. Crystal structures of chloride, bromide and iodide analogues are now available, showing increasing planarization of the abpy ligand in that order. Cyclic voltammetry, EPR, IR and UV/Vis spectroelectrochemistry of the reduced forms [(abpy)Re(CO)₃(Hal)]⁻ illustrate that the four halide complexes differ only partially in their properties. The strongest deviations are observed for [(abpy)Re(CO)₃F]⁻ which is distinguished by the widest electrochemical potential range but most pronounced chemical lability. In the EPR spectrum the fluoride exhibits the highest isotropic g value (2.0085) and the lowest rhenium coupling constant, which is of the same magnitude (2 mT) as the detectable ¹⁹F hyperfine splitting.     

Structure-biodistribution relation of neutral Tc(CO)3-complexes with tridentate N-substituted derivatives of aminoethylglycine and phenylenediamine

Derivatives of ethylenediamine-N-acetic acid (EDAA = N-aminoethylglycine = AEG) and ortho-phenylenediamine-N-acetic acid (PDAA) with uncharged substituents on one or both of the amines form neutral complexes with a [^99mTc(CO)₃]⁺-moiety. We studied the influence of different modifications at the amines (e.g., with methyl, ethyl, butyl or benzyl groups) on the behaviour of the ^99mTc(CO)₃-complexes in vivo in mice, with special focus on blood-brain barrier (BBB) passage. The complexes have been characterised by reversed phase HPLC, log P, electrophoresis and some of them also by LC-MS. Log P values of the ^99mTc-tricarbonyl complexes varied from −0.52 (AEG) to 2.5 (N,N′-dibenzyl-EDAA). With increasing lipophilicity, more of the activity was found in liver and intestines as compared to kidneys and urine for the more polar complexes. Brain uptake was found for the ^99mTc(CO)₃-complexes with N,N′-dibutyl-ethylenediamine-N-acetic acid (0.34% of I.D. after 2 min) and ortho-phenylenediamine-N-acetic acid (0.22% of I.D. after 2 min).     

A series of three-dimensional coordination polymers with general formula [{Ln(H2O)n}{Re6Te8(CN)6}] · xH2O (Ln = Eu,Gd, Tb,Dy, Ho,Er, Tm,Yb; n = 3, 4, x = 0, 2.5)

A series of new compounds containing rare earth cations (Eu to Yb) and paramagnetic cluster anion [Re₆Te₈(CN)₆]³⁻ was prepared and investigated. The X-ray structural analyses have revealed that the compounds [{Ln(H₂O)₄}{Re₆Te₈(CN)₆}] · 2.5H₂O; Ln = Eu (1), Tb (3), Dy (4), Ho (5), Er (6), Tm (7), [{Gd(H₂O)₃}{Re₆Te₈(CN)₆}] · 2.5H₂O (2) and [{Yb(H₂O)₄}{Re₆Te₈(CN)₆}] (8) are three-dimensional polymers based on Re–CN–Ln interactions. Measurements of magnetic susceptibility for 2 and 5 showed that effective magnetic moment (at 300 K) was 8.13 μ_B for compound 2 and 10.79 μ_B for compound 5 with weak antiferromagnetic ordering appeared at low temperatures.     

Reactivity of ZrCl4 and HfCl4 with silylamines and thermal decomposition of the compounds [MCl4{NH(R)(SiR′3)}] (M = Zr,Hf, R = tBu,R′ = Me; R = SiR′3 = SiMe3, SiMe2H)

The Lewis acid/base adducts [MCl₄{NH(R)(SiR′₃)}] (M = Zr, Hf; R = tBu, R′ = Me; R = SiR′₃ = SiMe₃, SiMe₂H) were synthesized by the 1:1 reaction of MCl₄ with NH(R)(SiR′₃) in dichloromethane solution at room temperature. The decomposition of [MCl₄{NH(R)(SiR′₃)}] proceeds with the elimination of R′₃SiCl, as shown by thermogravimetric analysis. Pyrolysis of the compounds at 620 °C under inert conditions (N₂, vacuum) afforded powders of composition [ClMN] or [Cl₂MNH]. Preliminary low pressure chemical vapour deposition experiments show that [MCl₄{NH(R)(SiR′₃)}] deposits thin films of metal nitride contaminated with metal oxide.