Copper(II) complexes with neutral bis(pyrazolyl)methane ligands: The influence of steric hindrance on their structures and properties

By using the neutral bidentate nitrogen-containing ligands; bis(3,5-dimethyl-1-pyrazolyl)methane (L0″), bis(3,5-diisopropyl-1-pyrazolyl)methane (L1″), bis(3-tertiary-butyl-5-isopropyl-1-pyrazolyl)methane (L3″), and bis(3,5-ditertiary-butyl-1-pyrazolyl)methane (L4″), the copper(II) nitrato complexes [Cu(L0″)₂(NO₃)]NO₃ (1NO₃), [Cu(L0″)(NO₃)₂] (2), [Cu(L1″)(NO₃)₂] (3), [Cu(L3″)(NO₃)₂] (4), and [Cu(L4″)(NO₃)₂] (5), chloro complexes [Cu(L0″)₂Cl]₂(CuCl₄) (6CuCl₄), [Cu(L0″)₂Cl]₂(Cu₂Cl₆) (6Cu₂Cl₆), [Cu(L1″)Cl₂] (7), and [Cu(L3″)Cl₂] (8), nitrito complexes [Cu(L0″)(ONO)₂] (9) and [Cu(L1″)(ONO)₂] (10), and the complexes with perchlorate ions [Cu(L0″)₂(CH₃OH)](ClO₄)₂ (11ClO₄) and [Cu(L1″)₂(H₂O)](ClO₄)₂ (12ClO₄) were systematically synthesized and fully characterized by X-ray crystallography and by IR, far-IR, UV–Vis absorption, and ESR spectroscopy. In comparison with the obtained complexes with four bis(pyrazolyl)methanes having different bulkiness at pyrazolyl rings, the second coordination sphere effects on the ligands are discussed in detail. Moreover, the structures and physicochemical properties of these obtained complexes are compared with those of the related complexes with the neutral tridentate tris(pyrazolyl)methane ligand.     

Coordination behavior of 3,4-bis(2-pyridylmethylthio)toluene with copper(II) ions: Synthesis,structural characterization and reactivity,and DNA binding study of the dinuclear copper(II) complex

On reaction of different copper(II) salts with 3,4-bis(2-pyridylmethylthio)toluene (L) having neutral tetradentate NSSN donor set in different chemical environments, two mononuclear copper(II), one dinuclear copper(I) and one dinuclear copper(II) complexes, formulated as [Cu^II(L)(H₂O)₂](NO₃)₂ (1), [Cu^II(pic)₂] (2), [Cu^I₂(L)₂](ClO₄)₂ (3) and [Cu^II₂(L)₂Cl₂](ClO₄)₂ (4), respectively, were isolated in pure form [where pic = picolinate]. All the complexes were characterized by physicochemical and spectroscopic methods. The product of the reactions are dependent on the counter anion of copper(II) salts used as reactant and on the reaction medium. Complexes 1 and 4 were obtained with nitrate and perchlorate copper(II) salts, respectively. On the other hand, C–S bond cleavage was observed in the reaction of L with copper(II) chloride to form in situ picolinic acid and complex 2. Dinuclear complexes 3 and 4 were separated out when copper(II) perchlorate was allowed to react with L in methanol and in acetonitrile, respectively, under aerobic condition. The X-ray diffraction analysis of the dinuclear complex 3 shows a highly distorted tetrahedral geometry about each copper ion. Complex 4 is converted to 3 in acetonitrile in presence of catechol. The spectral study of complex 4 with calf thymus DNA is indicative of a groove binding mode interaction.     

1D coordination polymers of silver(I) and copper(II) based on bis(N-heterocyclic carbene) ligands: Synthesis and structural studies

The alkyl chain-linked diimidazolium (or dibenzimidazolium) salts, 1,1′-diethyl-4,4′-tetramethylene-diimidazolium-diiodide (L¹H₂·I₂) and 1,1′-diethyl-3,3′-trimethylene-dibenzimidazolium-diiodide (L²H₂·I₂), and their silver(I) and copper(II) coordination polymers, [L¹AgI]_n (1) and [L²Cu₂I₄]_n (2), have been prepared and characterized. Complex 1 is a 1D helical polymer generated by bidentated carbene ligands (L¹) and Ag(I) atoms. The 1D polymer of 2 is formed by bidentated carbene ligands (L²) and coplanar quadrilateral Cu₂I₂ units. 3D supramolecular frameworks in the crystal packings of 1 and 2 are formed via intermolecular weak interactions, including C–H···π contacts, π–π interactions and C–H···I hydrogen bonds.     

Copper(II) complexes of tetradentate N2S2 donor sets: Synthesis,crystal structure characterization and reactivity

Two mononuclear and one dinuclear copper(II) complexes, containing neutral tetradentate NSSN type ligands, of formulation [Cu^II(L¹)Cl]ClO₄ (1), [Cu^II(L²)Cl]ClO₄ (2) and [Cu^II₂(L³)₂Cl₂](ClO₄)₂ (3) were synthesized and isolated in pure form [where L¹ = 1,2-bis(2-pyridylmethylthio)ethane, L² = 1,3-bis(2-pyridylmethylthio)propane and L³ = 1,4-bis(2-pyridylmethylthio)butane]. All these green colored copper(II) complexes were characterized by physicochemical and spectroscopic methods. The dinuclear copper(II) complex 3 changed to a colorless dinuclear copper(I) species of formula [Cu^I₂(L³)₂](ClO₄)₂,0.5H₂O (4) in dimethylformamide even in the presence of air at ambient temperature, while complexes 1 and 2 showed no change under similar conditions. The solid-state structures of complexes 1, 2 and 4 were established by X-ray crystallography. The geometry about the copper in complexes 1 and 2 is trigonal bipyramidal whereas the coordination environment about the copper(I) in dinuclear complex 4 is distorted tetrahedral.     

Structural characterization of a copper(II) complex containing oxidative cyclization of N-2-(4-picolyl)-N′-(4-methoxyphenyl)thiourea,new ligands of 4-picolylthiourea derivatives and the precursor molecular structure of oxidative cyclization of N-(2-pyridyl)-N′-(4-methoxyphenyl)thiourea

Three new compounds of aryl thiourea derivatives, namely N-2-(4-picolyl)-N′-(4-methoxyphenyl)thiourea (L1), N-2-(6-picolyl)-N′-(4-methoxyphenyl)thiourea (L2) and N-2-(4-picolyl)-N′-(4-nitrophenyl)thiourea (L3), and the new copper(II) complex [Cu(4PicTz4OMePh)(OAC)(EtOH)] (C1), as a result of oxidative cyclization of the ligand (L1), were synthesized. In addition, pure precursor (P1), as the product of the oxidative cyclization of N-(2-pyridyl)-N′-(4-methoxyphenyl)thiourea (L4), was isolated and characterized. Ligands (L1) and (L2) were characterized by ¹H and ¹³C NMR and single crystal X-ray analysis. ¹H NMR spectroscopy showed strong hydrogen bonding interactions between N′H-functionalities and the pyridine nitrogen atoms as well as weak intermolecular hydrogen bonding between the thione sulfur and the NH hydrogen. Structural studies of complex (C1) showed that the copper ion is five-coordinated with a square-pyramidal environment. The oxidative cyclization of ligand (L1) results in an anionic bidentate ligand in complex (C1). Both ligand (L1) and precursor (P1) crystallize as centrosymmetric dimers.     

Three 3D hybrid networks based on octamolybdates and different Cu/Cu-bis(triazole) motifs

Three 3D compounds based on octamolybdate clusters and various Cu^I/Cu^II-bis(triazole) motifs, [Cu^I₂btb][β-Mo₈O₂₆]_0.5 (1), [Cu^I₂btpe][β-Mo₈O₂₆]_0.5 (2), and [Cu^II(btpe)₂][β-Mo₈O₂₆]_0.5 (3) [btb=1,4-bis(1,2,4-triazol-1-yl)butane, btpe=1,5-bis(1,2,4-triazol-1-yl)pentane], were isolated via tuning flexible ligand spacer length and metal coordination preferences. In 1, the copper(I)-btb motif is a one-dimensional (1D) chain which is further linked by hexadentate β-[Mo₈O₂₆]⁴⁻ clusters via coordinating to Cu^I cations giving a 3D structure. In 2, the copper(I)-btpe motif exhibits a “stairs”-like [Cu^I₂btpe]²⁺ sheet, and the tetradentate β-[Mo₈O₂₆]⁴⁻ clusters interact with two neighboring [Cu^I₂btpe]²⁺ sheets constructing a 3D framework. In 3, the copper(II)-btpe motif possesses a novel (2D→3D) interdigitated structure, which is further connected by the tetradentate β-[Mo₈O₂₆]⁴⁻ clusters forming a 3D framework. The thermal stability and luminescent properties of 1-3 are investigated in the solid state.     

Syntheses and properties of Re(III) complexes derived from hydrotris(1-pyrazolyl)methanes: molecular structure of [ReCl2(HCpz3)(PPh3)][BF4]

The complexes [ReCl₂{N₂C(O)Ph}(Hpz)(PPh₃)₂] (1) (Hpz = pyrazole), [ReCl₂{N₂C(O)Ph}(Hpz)₂(PPh₃)] (2), [ReCl₂(HCpz₃)(PPh₃)][BF₄] (3) and [ReCl₂(3,5-Me₂Hpz)₃(PPh₃)]Cl (4) were obtained by treatment of the chelate [ReCl₂{η²-N,O-N₂C(O)Ph}(PPh₃)₂] (0) with hydrotris(1-pyrazolyl)methane HCpz₃ (1,3), pyrazole Hpz (1,2), hydrotris(3,5-dimethyl-1-pyrazolyl)methane HC(3,5-Me₂pz)₃ (4) or dimethylpyrazole 3,5-Me₂Hpz (4). Rupture of a C(sp³)-N bond in HCpz₃ or HC(3,5-Me₂pz)₃, promoted by the Re centre, has occurred in the formation of 1 or 4, respectively. All compounds have been characterized by elemental analyses, IR and NMR spectroscopy, FAB-MS spectrometry, cyclic voltammetry and, for 1 · CH₂Cl₂ and 3, also by single crystal X-ray analysis. The electrochemical E_L Lever parameter has been estimated, for the first time, for the HCpz₃ and the benzoyldiazenide NNC(O)Ph ligands.     

Nickel(II) and copper(II) complexes of unsymmetrical tetradentate reduced Schiff base ligands

Two new reduced Schiff base ligands, [HL¹ = 4-{2-[(pyridin-2-ylmethyl)-amino]-ethylimino}-pentan-2-one and HL² = 4-[2-(1-pyridin-2-yl-ethylamino)-ethylimino]-pentan-2-one] have been prepared by reduction of the corresponding tetradentate unsymmetrical Schiff bases derived from 1:1: 1 condensation of 1,2-ethanediamine, acetylacetone and pyridine-2-carboxaldehyde/2-acetyl pyridine. Four complexes, [Ni(L¹)]ClO₄ (1), [Cu(L¹)]ClO₄ (2), [Ni(L²)]ClO₄ (3), and [Cu(L²)]ClO₄ (4) with these two reduced Schiff base ligands have been synthesized and structurally characterized by X-ray crystallography. The mono-negative ligands L¹ and L² are chelated in all four complexes through the four donor atoms to form square planar nickel(II) and copper(II) complexes. Structures of 3 and 4 reveal that enantiomeric pairs are crystallized together with opposite chirality in the nitrogen and carbon atoms. The two Cu^II complexes (2 and 4) exhibit both irreversible reductive (Cu^II/Cu^I; E_pc, −1.00 and −1.04 V) and oxidative (Cu^II/Cu^III; E_pa, +1.22 and +1.17 V, respectively) responses in cyclic voltammetry. The electrochemically generated Cu^I species for both the complexes are unstable and undergo disproportionation.     

On the role of anion templates for the self-assembly of octanuclear copper(I) dichalcogenophosph(in)ate clusters

The octanuclear Cu^I cubic clusters [Cu₈(S₂PPh₂)₆]²⁺ (1) and [Cu₈(μ₈-Cl)(S₂PPh₂)₆]⁺ (2) have been prepared and crystallographically characterized, and their cluster bonding modes investigated with density functional theory (DFT) calculations. Both are rare examples of metal dithiophosphinate clusters and 1 is the first example of a non anion-centered or ‘empty’ dithiophosph(in)ate Cu^I₈ cube. DFT calculations indicate that the stability of the empty cluster 1 can be attributed to its strong metal–ligand interactions, with no significant Cu?Cu bonding interactions present. Comparison of the solid-state structures of 1, 2 and the analogous sulfide centered cluster [Cu₈(μ₈-S)(S₂PPh₂)₆] (3) reveals a significant contraction of the octanuclear Cu^I₈ cube upon anion encapsulation. This contraction is shown, using DFT calculations, to be predominately assignable to the ionic interaction between the Cu^I cations and the encapsulated anion center.     

Structure,biological and electrochemical studies of transition metal complexes from N,S,N′ donor ligand 8-(2-pyridinylmethylthio)quinoline

The semirigid tridentate 8-(2-pyridinylmethylthio)quinoline ligand (Q1) is shown to form the structurally characterized transition metal complexes [Cu(Q1)Cl₂] (1), [Co(Q1)(NO₃)₂] (2), [Cd(Q1)(NO₃)₂] (3), [Cd(Q1)I₂] (4). [Cu(Q1)₂](BF₄)₂·(H₂O)₂ (5), [Cu(Q1)₂](ClO₄)₂·(CH₃COCH₃)₂ (6), [Zn(Q1)₂](ClO₄)₂(H₂O)₂ (7), [Cd₂(Q1)₂Br₄] (8), [Ag₂(Q1)₂(ClO₄)₂] (9), and [Ag₂(Q1)₂(NO₃)₂] (10). Four types of structures have been observed: ML-type in complexes 1–4, in which the anions Cl⁻, NO₃⁻ or I⁻ also participate in the coordination; ML₂⁻ type in complexes 5–7 without direct coordination of the anions BF₄⁻ or ClO₄⁻ and with more (Cu²⁺) or less (Zn²⁺) distorted bis-fac coordinated Q1; M₂L₂-type in complex 8, in which two Br⁻ ions act as bridges between two metal ions; and M₂(μ-L)₂-type in complexes 9 and 10, in which the ligand bridges two anion binding and Ag–Ag bonded ions. Depending on electron configuration and size, different coordination patterns are observed with the bonds from the metal ions to N_pyridyl longer or shorter than those to N_quinoline. Typically Q1 acts as a facially coordinating tridentate chelate ligand except for the compounds 9 and 10 with low-coordinate silver(I). Except for 6 and 8, the complexes exhibit distinct constraining effects against both G(+) and G(-) bacteria. Complexes 1, 3, 4, 5, 7 have considerable antifungal activities and complexes 1, 5, 7, and 10 show selective effects to restrain certain botanic bacteria. Electrochemical studies show quasi-reversible reduction behavior for the copper(II) complexes 1, 5 and 6.     

Syntheses, structures and photoluminescence of a series of coordination frameworks based on dicarboxylate anion and bis(imidazole) ligand

In this article, ten new coordination frameworks, namely, [Ni(H₂O)₆]·(L3) (1), [Zn(L3)(H₂O)₃] (2), [Cd(L3)(H₂O)₃]·5.25H₂O (3), [Ag(L1)(H₂O)]·0.5(L3) (4), [Ni(L3)(L1)] (5), [Zn(L3)(L1)_0.5]·H₂O (6), [Cd(L3)(L1)_0.5(H₂O)] (7), [CoCl(L3)_0.5(L1)_0.5] (8), [ZnCl(L3)_0.5(L2)_0.5] (9), and [CoCl(L3)_0.5(L2)_0.5] (10), where L1 = 1,1′-(1,4)-butanediyl)bis(imidazole), L2 = 1,1′-(1,4-butanediyl)bis(2-ethylbenzimidazole) and H₂L3 = 3,3′-(p-xylylenediamino)bis(benzoic acid), have been synthesized by varying the metal centers and nitrogen-containing secondary ligands. These structures have been determined by single-crystal X-ray diffraction analyses, elemental analyses and IR spectra. In 1, the L3 anion is not coordinated to the Ni(II) center as a free ligand. The Ni(II) ion is coordinated by water molecules to form the cationic [Ni(H₂O)₆]²⁺ complex. The hydrogen bonds between L3 anions and [Ni(H₂O)₆]²⁺ cations result in a three-dimensional (3D) supramolecular structure of 1. In compounds 2 and 3, the metal centers are linked by the organic L3 anions to generate 1D infinite chain structures, respectively. The hydrogen bonds between carboxylate oxygen atoms and water molecules lead the structures of 2 and 3 to form 3D supramolecular structures. In 4, the L3 anion is not coordinated to the Ag(I) center, while the L1 ligands bridge adjacent Ag(I) centers to give 1D Ag-L1 chains. The hydrogen bonds among neighboring L3 anions form infinite 2D honeycomb-like layers, in the middle of which there exist large windows. Then, 1D Ag-L1 chains thread in the large windows of the 2D layer network, giving a 3D polythreaded structure. Considering the hydrogen bonds between the water molecules and L3 anions, the structure is further linked into a 3D supramolecular structure. Compounds 5 and 7 were synthesized through their parent compounds 1 and 3, respectively, while 6 and 9 were obtained by their parent compound 2. In 5, the L3 anions and L1 ligands connect the Ni(II) atoms to give a 3D 3-fold interpenetrating dimondoid topology. Compound 6 exhibits a 3D three-fold interpenetrating α-Po network structure formed by L1 ligands connecting Zn-L3 sheets, while compound 7 shows a 2D (4,4) network topology with the L1 ligands connecting the Cd-L3 double chains. In compound 8, the L1 ligands linked Co-L3 chains into a 2D layer structure. Two mutual 2D layers interpenetrated in an inclined mode to generate a unique 3D architecture of 8. Compounds 9 and 10 display the same 2D layer structures with (4,4) network topologies. The effects of the N-containing ligands and the metal ions on the structures of the complexes 1-10 were discussed. In addition, the luminescent properties of compounds 2-4, 6, 7 and 9 were also investigated.     

Half sandwich complexes of Ru(II) and complexes of Pd(II) and Pt(II) with seleno and thio derivatives of pyrrolidine: Synthesis, structure and applications as catalysts for organic reactions

The reactions of PhSe⁻, PhS⁻ and Se²⁻ with N-{2-(chloroethyl)}pyrrolidine result in N-{2-(phenylseleno)ethyl}pyrrolidine (L1), N-{2-(phenylthio)ethyl}pyrrolidine (L2), and bis{2-pyrrolidene-N-yl)ethyl selenide (L3), respectively, which have been explored as ligands. The complexes [PdCl₂(L1/L2)] (1/7), [PtCl₂(L1/L2)] (2/8), [RuCl(η⁶-C₆H₆)(L1/L2)][PF₆] (3/9), [RuCl(η⁶-p-cymene)(L1/L2)][PF₆] (4/10), [RuCl(η⁶-p-cymene)(NH₃)₂][PF₆] (5) and [Ru(η⁶-p-cymene)(L1)(CH₃CN)][PF₆]₂·CH₃CN (6) have been synthesized. The L1-L3 and complexes were found to give characteristic NMR (Proton, Carbon-13 and Se-77). The crystal structures of complexes 1, 3-6, 9 and 10 have been solved. The Pd-Se and Ru-Se bond lengths have been found to be 2.353(2) and 2.480(11)/2.4918(9)/2.4770(5) Å, respectively. The complexes 1 and 7 have been explored for catalytic Heck and Suzuki-Miyaura coupling reactions. The value of TON has been found up to 85 000 with the advantage of catalyst’s stability under ambient conditions. The efficiency of 1 is marginally better than 7. The Ru-complexes 3 and 9 are good for catalytic oxidation of primary and secondary alcohols in CH₂Cl₂ in the presence of N-methylmorpholine-N-oxide (NMO). The TON value varies between 8.0 × 10⁴ and 9.7 × 10⁴ for this oxidation. The 3 is somewhat more efficient catalyst than 9.     

Influence of synthesis condition on product formation: hydrothermal auto-oxidated synthesis of five copper halides with ratio of Cu(I)/Cu(II) in 1:1, 2:1, 3:1, 4:1 and 1:0

The hydrothermal synthesis and structural characterization of five copper iodides derived from chelated ligands, 1, 10-phenanthroline (phen), ethylenediamine (en) and 1, 3-propanediamine, are reported. Except monovalent copper compound 1 ((phen)Cu₃I₃1), other four compounds ([Cu(phen)₂I][CuI₂] 2, [Cu(phen)₂I][Cu₃I₄] 3, [Cu(en)₂][Cu₄(phen)₂I₆] 4 and [Cu(1, 3-propanediamine)₂][CuI₂]₂5) are mixed-valent Cu(I)-Cu(II) compounds by partially auto-oxidated from Cu(I). Supramolecular frameworks of these compounds can be assembled by C/N-H?I hydrogen bonds, Cu(I)-Cu(I) interaction, weak Cu-I semicoordinate interaction, C-H?π and π-π stacking interactions. It's noteworthy that we find hydrothermal synthesis under higher pH value, higher synthesis temperature and longer reaction time can obtain higher ratio of Cu(I)/Cu(II) copper iodides and organic ligand with lower steric hinderance is prone to coordinated with divalent copper to form cation unit. Finally, the fluorescent study shows 1 exhibits intense orange-red luminescence with long lifetime at 293 K and more intense emission and longer lifetime at 77 K. Moreover, the room temperature EPR spectra of above five compounds not only show the valence of copper but demonstrate the coordination environment of Cu(II) centre.     

Synthesis, characterization and crystal structures of di-three-coordinated copper(I) macrocyclic Schiff base complexes

The air-stable di-copper(I) complexes Cu₂L(SCN)₂ (1) and Cu₂L(SCN)_1.86I_0.14 (2) of the N₄ macrocyclic Schiff base ligand L have been synthesized and characterized by IR, elemental analysis, UV-Vis and crystal structure determination. X-ray analysis of the complexes shows an approximate distorted trigonal planar geometry around each copper(I) ion that is constructed from one N-bonded thiocyanate (or iodide in 2) group and two imine nitrogen atoms. DFT calculations were used to determine the structural features of the Cu₂L(SCN)₂ complex, and these were consistent with the experimental data for the complex.     

Synthesis,spectral characterization,properties and structures of copper(I) complexes containing novel bidentate iminopyridine ligands

Four new ligands, (4-methyl-phenyl)-pyridin-2-ylmethylene-amine (A), (2,3-dimethyl-phenyl)-pyridin-2-ylmethylene-amine (B), (2,4-dimethyl-phenyl)-pyridin-2-ylmethylene-amine (C) and (2,5-dimethyl-phenyl)-pyridin-2-ylmethylene-amine (D), and their corresponding copper(I) complexes, [Cu(A)₂]ClO₄ (1a), [Cu(B)₂]ClO₄ (1b), [Cu(C)₂]ClO₄ (1c), [Cu(D)₂]ClO₄ (1d), [Cu(A)(PPh₃)₂]ClO₄ (2a), [Cu(B)(PPh₃)₂]ClO₄ (2b), [Cu(C)(PPh₃)₂]ClO₄ (2c) and [Cu(D)(PPh₃)₂]ClO₄ (2d), have been synthesized and characterized by CHN analyses, ¹H and ¹³C NMR, IR and UV–Vis spectroscopy. The crystal structures of [Cu(B)₂]ClO₄ (1b), [Cu(C)₂]ClO₄ (1c) and [Cu(A)(PPh₃)₂]ClO₄ · 1/2CH₃CN (2a) were determined from single crystal X-ray diffraction. The coordination polyhedron about the copper(I) center in the three complexes is best described as a distorted tetrahedron. A quasireversible redox behavior is observed for the complexes.     

Investigations into bis(triphenylphosphine)copper(I) complexes with cyclic derivatives of methylpyruvate thiosemicarbazones

The syntheses of four compounds, obtained by the reaction of methylpyruvate thiosemicarbazone (Hmpt) and its methyl (Me-Hmpt) and allyl (Allyl-Hmpt) derivatives with bis(triphenylphosphine)copper(I) acetate, are reported. The compounds [Cu(PPh₃)₂(pt_c)(Hpt_c)]·H₂O (1), [Cu(PPh₃)₂(Me-pt_c)] (2), [Cu₂(PPh₃)₂μ-S(Me-pt)μ-S(Me-pt_c)]·H₂O (3) and [Cu(PPh₃)₂(Allyl-pt_c)] (4) [H₂pt = pyruvic acid thiosemicarbazone and Hpt_c = cyclized pyruvic acid thiosemicarbazone, Me = methyl and Allyl are radical substituents on the amino nitrogen] were characterized by elemental analysis, IR, ¹H NMR, and by X-ray crystallography. Compound 3 was also studied by EPR because of the presence in the compound of two copper atoms in two different oxidation states. During the complexation reaction, the thiosemicarbazone ligands tend to undergo a cyclization reaction that leads to the formation of a six-member heterocyclic ring. All four compounds present the [Cu(PPh₃)₂]⁺ fragment and constant but different coordination situations. Compound 1 contains two cyclic ligand molecules, one protonated and the other deprotonated, bound as monodentate through the sulfur. Compounds 2 and 4 present a single deprotonated cyclic SN bidentate ligand molecule, while compound 3 contains copper(I) and copper(II), and two ligand molecules, one of which is linear and behaves as SNO tridentate and the other is cyclic and behaves as bridging μSN.     

One-dimensional and two-dimensional coordination polymers constructed from copper(II) nodes and polycarboxylato spacers: Synthesis,crystal structures and magnetic properties

Four new coordination polymers were obtained by employing polycarboxylato spacers and cationic copper(II) complexes as nodes: ^∞₂[Cu₃(trim)₂(NH₃)₆(H₂O)₃] (1); ^∞₁[Cu(tmen)(dhtp)] (2), ^∞₁[Cu(tmen)(hitp)(H₂O)] (3), ^∞₁[Cu(tmen)(nitp)] (4). (H₃trim = trimesic acid, H₂dhtp = 2,5-dihydroxy-terephthalic acid; H₂hitp = 5-hydroxy-isophthalic acid, H₂nitp = 5-nitro-isophthalic acid; tmen = N,N,N′,N′-tetramethyl-ethylenediamine). The crystal structures of the four compounds have been solved. Compound 1 consists of 2D coordination polymers with heart-shaped meshes, while compounds 2–4 contain infinite zigzag chains. The role of the hydrogen bond interactions in sustaining the supramolecular solid-state architectures in compounds 1 and 3 is discussed. The cryomagnetic investigation of compounds 1, 2, and 4 reveals antiferromagnetic interactions between the copper ions.     

Coordinating properties of [M(CO)5(CN)] [M=Cr; Mo; W] ligands: formation of ion pairs or dinuclear cyanide-bridged complexes, spectroscopic and X-ray diffraction studies

The reaction of sodium cyanopentacarbonylmetalates Na[M(CO)₅(CN)] (M=Cr; Mo; W) with cationic Fe(II) complexes [Cp(CO)(L)Fe(thf)][O₃SCF₃], [L=PPh₃ (1a), CN-Benzyl (1b), CN-2,6-Me₂C₆H₃ (1c); CN-Bu^t (1d), P(OMe)₃ (1e), P(Me)₂Ph (1f)] in acetonitrile solution, yielded the metathesis products [Cp(CO)(L)Fe(NCCH₃)][NCM(CO)₅] [M=W, L=PPh₃ (2a), CN-Benzyl (2b), CN-2,6-Me₂C₆H₃ (2c); CN-Bu^t (2d), P(OMe)₃ (2e), P(Me)₂Ph (2f); M=Cr, L=(PPh₃) (3a), CN-2,6-Me₂C₆H₃ (3c); M=Mo, L=(PPh₃) (4a), CN-2,6-Me₂C₆H₃ (4c)]. The ionic nature of such complexes was suggested by conductivity measurements and their main structural features were determined by X-ray diffraction studies. Well-resolved signals relative to the [M(CO)₅(CN)] moieties could be distinguished only when ¹³C NMR experiments were performed at low temperature (from −30 to −50 °C), as in the case of [Cp(CO)(PPh₃)Fe(NCCH₃)][NCW(CO)₅] (2a) and [Cp(CO)(Benzyl-NC)Fe(NCCH₃)][NCW(CO)₅] (2b). When the same reaction was carried out in dichloromethane solution, neutral cyanide-bridged dinuclear complexes [Cp(CO)(L)FeNCM(CO)₅] [M=W, L=PPh₃ (5a), CN-Benzyl (5b); M=Cr, L=(PPh₃) (6a), CN-2,6-Me₂C₆H₃ (6c), CO (6g); M=Mo, L=CN-2,6-Me₂C₆H₃ (7c), CO (7g)] were obtained and characterized by infrared and NMR spectroscopy. In all cases, the room temperature ¹³C NMR measurements showed no broadening of cyano pentacarbonyl signals and, relative to tungsten complexes [Cp(CO)(PPh₃)FeNCW(CO)₅] (5a) and [Cp(CO)(CN-Benzyl)FeNCW(CO)₅] (5b), the presence of ¹⁸³W satellites of the ¹³CN resonances (J_CW ∼ 95 Hz) at room temperature confirmed the formation of stable neutral species. The main ¹³C NMR spectroscopic properties of the latter compounds were compared to those of the linkage isomers [Cp(CO)(PPh₃)FeCNW(CO)₅] (8a) and [Cp(CO)(CN-Benzyl)FeCNW(CO)₅] (8b). The characterization of the isomeric couples 5a-8a and 5b-8b was completed by the analyses of their main IR spectroscopic properties. The crystal structures determined for 2a, 5a, 8a and 8b allowed to investigate the geometrical and electronic differences between such complexes. Finally, the study was completed by extended Hückel calculations of the charge distribution among the relevant atoms for complexes 2a, 5a and 8a.     

Synthesis, characterization, and the role of counterion in stabilizing trigonal pyramidal copper(I)/2,2′bipyridine complexes containing electron-poor methyl acrylate

Copper(I)/2,2′-bipyridine complexes, [Cu^I(bpy)(π-CH₂CHCOOCH₃)][A] have been synthesized and characterized. These complexes are used in copper(I) mediated cyclopropanation and aziridination reactions of methyl acrylate and represent the first class of trigonal pyramidal copper(I) complexes with π-coordinated electron poor olefins. In the case of 1 and 3, weak coordination of the counterion was observed. The counterion was noncoordinating in complex 2, which was dimeric in the solid state with the oxygen atoms of the carbonyl moieties in methyl acrylate bridging two copper(I) centers.     

Novel copper complexes based on the thiocyanate bridge - Synthesis, X-ray studies and magnetic properties

Three novel compounds {[Cu(bpzm)(SCN)][Cu(bpzm)(MeOH)][Cu(SCN)₄]}_n (1a), {[Cu₂(bpzm)₂(μ-SCN)(SCN)₃]}_n (1b) and [Cu₂(μ-SCN)₂(SCN)₂(dpa)₂] (2) have been obtained in one-step self-assembly reaction of copper dichloride, a suitable N-N ligand (bis(pyrazol-1-yl)methane and 2,2′-dipyridylamine) and ammonium thiocyanate. For the reaction involving bis(pyrazol-1-yl)methane, an unprecedented in situ reduction of some Cu(II) ions to Cu(I) has been observed. The compound {[Cu(bpzm)(SCN)][Cu(bpzm)(MeOH)][Cu(SCN)₄]}_n (1a) belongs to a relatively scarce group of mixed-valence Cu^II/Cu^I coordination polymers with interesting polymeric architecture. It creates infinite two-dimensional structure consisting of layers extending along crystallographic plane (0 0 1), in which the cations [Cu^II(bpzm)(SCN)]⁺ and [Cu^II(bpzm)(MeOH)]²⁺ are connected by ions [Cu^I(SCN)₄]³⁻ through single end-to-end thiocyanato bridges. Structure 1b consists two crystallographically independent chains. The chain A has a zig-zag form and extends along the crystallographic direction [0 0 1], whereas the second chain is linear and runs along the crystallographic direction [0 1 0]. The structure 2 consists of dinuclear [Cu₂(dpa)₂(μ-SCN)₂(SCN)₂] units. Variable-temperature magnetic susceptibility measurements show very weak antiferromagnetic interactions between the paramagnetic centres Cu(II) centers inside the crystal lattices of three novel compounds.