Photoinduced interactions between colloidal TiO2 nanoparticles and calf thymus-DNA

The interaction of colloidal TiO₂ nanoparticles with calf thymus-DNA was studied by using absorption, FT-IR, steady state and time resolved fluorescence spectroscopic techniques. The apparent association constant has been deduced (K_app = 2.85 × 10³ M⁻¹) from the absorption spectral changes of the DNA-colloidal TiO₂ nanoparticles using the Benesi–Hildebrand equation. Addition of colloidal TiO₂ nanoparticles quenched the fluorescence of EtBr–DNA. The number of binding sites (n = 0.97) and the apparent binding constant (K = 6.68 × 10³ M⁻¹) were calculated from relevant fluorescence quenching data. The quenching, through a static mechanism, was confirmed by time resolved fluorescence spectroscopy.     

Spectrometric study of the interaction between Alpinetin and bovine serum albumin using chemometrics approaches

The binding interaction of Alpinetin (APT) with bovine serum albumin (BSA) was studied by fluorescence, UV-visible and synchronous fluorescence spectroscopy (SFS) under simulated physiological conditions. The measured complex spectra were resolved by multivariate curve resolution-alternating least squares (MCR-ALS), yielding a host of data and information, which otherwise would have been impossible to obtain. The extracted profiles corresponded to the spectra of the single species in the APT/BSA mixture. In addition, the presence of the APT-BSA complex was demonstrated, and it was shown that the associated quenching of the fluorescence from the BSA protein resulted from the formation of APT-BSA complex via a static mechanism. The binding constant (K_a(ave) = 2.34 × 10⁶ L mol⁻¹) and the number of sites (n = 1) were obtained by fluorescence methods as were the thermodynamic parameters (ΔH⁰, ΔS⁰ and ΔG⁰). This work suggested that the principal binding between APT to BSA was facilitated by hydrophobic interactions. The thermodynamic parameters for APT were compared to those from the structurally similar Chrysin and Wogonin molecules. It appeared that the entropy parameters were relatively more affected by the small structural changes. SFS from the interaction of BSA and APT showed that the ligand affected the conformation of BSA. The competitive interaction of APT and site makers with BSA indicated site I as the binding area of APT in BSA.     

Facile, sensitive and selective fluorescence turn-on detection of HSA/BSA in aqueous solution utilizing 2,4-dihydroxyl-3-iodo salicylaldehyde azine

A novel fluorescence turn-on detection method of human serum albumin (HSA) and bovine serum albumin (BSA) in aqueous solution is investigated using 2,4-dihydroxyl-3-iodo salicylaldehyde azine (DISA). Upon the addition of DISA to HSA/BSA solution, a fluorescence turn-on effect at 529 nm can be observed with a large stokes shift of ∼129 nm based on hydrophobic binding-mode between protein and dye. Under the optimal condition, the linear ranges of fluorescence intensity for HSA and BSA are 0.1-30 μg mL⁻¹ with the relative correlation coefficient of R² = 0.991 (n = 10) and 0.3-50 μg mL⁻¹ with R² = 0.997 (n = 10); and the detection limits for HSA and BSA based on IUPAC (C_DL = 3S_b/m) are 20 ng mL⁻¹ and 50 ng mL⁻¹, respectively.     

Structural and electronic properties of CenO2n (n = 1-5) nanoparticles: A computational study

Understanding the electronic structures and properties of different size CeO₂ nanoparticles is very important for further application in the field of catalysis used in several promising materials. In this study, we have elucidated the electronic analyses of (CeO₂)_n (n = 1-5) nanoparticles through first-principle density-functional theory approach. All structures with the global minimal energies are obtained by fire algorithm combining simulated annealing method and then are further re-optimized by DMol³ program with double numerical atomic basis sets. Two useful analyzed methods (Fukui function and electronic density of state) are calculated to explain the chemical reactivity of different sites for (CeO₂)_n (n = 1-5) nanoparticles.     

Aminopolycarboxyl-modified Ag2S nanoparticles: Synthesis, characterization and resonance light scattering sensing for bovine serum albumin

A novel method was proposed to prepare a series of functionalized Ag₂S nanoparticles capped with various aminopolycarboxylic acids. The as-prepared Ag₂S nanoparticles were characterized by UV-vis, FTIR, resonance light scattering spectra (RLS) and transmission electron microscopy (TEM). Based on the RLS intensities enhanced by BSA-induced Ag₂S nanoparticles aggregation, a sensitive RLS method for the detection BSA at nanogram levels was established. The detection limits for BSA are between 8.6 and 112.6 ng mL⁻¹, depending on the different capping agents. The effects of various capping agents on the detection limits of BSA have been investigated. The detection limit is found to be dependent on the stability constant (log K_MY) of the silver-aminopolycarboxyl complexes.     

Rhenium(I)-based fluorescence resonance energy transfer probe for conformational changes of bovine serum albumin

Protein binding properties of fac-rhenium(I) complexes with general structure [Re(CO)₃(N-N)L]PF₆, where N-N = 4,4′-dinanoyl-2,2-bipyridine and L = py-3-COOH (1a) and py-3-CONH₂ (1b) with bovine serum albumin (BSA) were investigated at physiological pH (7.4) using UV-visible absorption and fluorescence spectral study, excited state lifetime measurement and circular dichroism (CD). The results observed from fluorescence spectra reveal the energy transfer from BSA to Re(I) complex, and the distance r between donor (BSA) and acceptor (Re(I) complex) is 3.05 nm and 2.16 nm for 1a and 1b respectively according to Forster's non-radiative energy transfer theory. CD results show that the binding of Re(I) complex could induce the conformational change with the loss of α-helicity.     

Ultrasensitive determination of silver ion based on synchronous fluorescence spectroscopy with nanoparticles

Based on the characteristics of synchronous fluorescence spectroscopy (SFS), a new method with high sensitivity and selectivity was developed for rapid determination of silver ion with functional cadmium sulphide (CdS) nanoparticles as a fluorescence probe. When Δλ (λ_em − λ_ex) = 215 nm, maximum synchronous fluorescence is produced at 304 nm. Under optimal conditions, functional cadmium sulphide displayed a calibration response for silver ion over a wide concentration range from 0.8 × 10⁻¹⁰ to 1.5 × 10⁻⁸ mol L⁻¹. The limit of detection was 0.4 × 10⁻¹⁰ mol L⁻¹ and the relative standard deviation of seven replicate measurements for the lowest concentration (0.8 × 10⁻¹⁰ mol L⁻¹) was 2.8%. Compared with several fluorescence methods, the proposed method had a wider linear range and improved the sensitivity. Furthermore, the concentration dependence of the synchronous fluorescence intensity is effectively described by a Langmuir-type binding isotherm.     

Adsorption of a protein-porphyrin complex at a liquid-liquid interface studied by total internal reflection synchronous fluorescence spectroscopy

Interfacial analysis has attracted more and more attention owing to its fundamental and biological importance. Total internal reflection fluorescence (TIRF) spectroscopy is a useful method to study interfacial properties. The synchronous scanning fluorescence technique provides a selective tool to analyze a specific component in a complex system. The interaction and adsorption of bovine serum albumin (BSA) and meso-tetrakis(4-sulfonatophenyl)porphyrin (TPPS) at toluene-water interface were studied successfully by the coupling technique of total internal reflection synchronous fluorescence (TIRSF). New methods are provided for the determination of the critical micelle concentration (cmc), apparent adsorption equilibrium constant (K_ad) and maximum amount of adsorption (f_max) at the liquid-liquid interface. The results indicated that BSA could adsorb onto the toluene-water interface as a complex of BSA-TPPS in a ratio of 1:1 ratio based on Langmuir adsorption isothermal model. The cmc, apparent K_ad and f_max for BSA at pH 3.1 were determined to be 1.0 × 10⁻⁴ mol L⁻¹, 1.15 × 10⁵ L mol⁻¹ and 1.14 × 10⁻⁹ mol cm⁻², respectively.     

Sensitive DNA biosensor improved by Luteolin copper(II) as indicator based on silver nanoparticles and carbon nanotubes modified electrode

A novel and sensitive electrochemical DNA biosensor has been developed for the detection of DNA hybridization. The biosensor was proposed by using copper(II) complex of Luteolin C₃₀H₁₈CuO₁₂ (CuL₂) as an electroactive indicator based on silver nanoparticles and multi-walled carbon nanotubes (Ag/MWCNTs) modified glassy carbon electrode (GCE). In this method, the 4-aminobenzoic acid (4-ABA) and Ag nanoparticles were covalently grafted on MWCNTs to form Ag/4-ABA/MWCNTs. The proposed method dramatically increased DNA attachment quantity and complementary ssDNA detection sensitivity for its large surface area and good charge-transport characteristics. DNA hybridization detection was performed using CuL₂ as an electroactive indicator. The CuL₂ was synthesized and characterized using elemental analysis (EA) and IR spectroscopy. Cyclic voltammetry (CV) and fluorescence spectroscopy were used to investigate the interaction between CuL₂ and ds-oligonucleotides (dsDNA). It was revealed that CuL₂ presented high electrochemical activity on GCE, and it could be intercalated into the double helices of dsDNA. The target ssDNA of the human hepatitis B virus (HBV) was quantified in a linear range from 3.23 × 10⁻¹² to 5.31 × 10⁻⁹ M (r = 0.9983). A detection limit of 6.46 × 10⁻¹³ M (3σ, n = 11) was achieved.     

Gallium and indium dithiocarboxylates: Synthesis, spectroscopic characterization and structure of [MeGa(S2Ctol)2]

Several gallium and indium dithiocarboxylate complexes of the type [Me_nM(S₂CR)_3−n] (M = Ga, In; n = 0, 1, 2; R = phenyl (Ph), p-tolyl (tol), mesityl (Mes)) have been synthesized. These complexes were characterized by elemental analysis, IR, UV-vis and NMR (¹H,¹³C{¹H}) spectroscopy. Structure of [MeGa(S₂Ctol)₂] was established by X-ray crystallography. The gallium atom adopts a distorted five coordinate geometry which is intermediate between trigonal bipyramidal and square pyramidal configurations. The complex [Me₂InS₂Ctol] underwent a two-step thermal decomposition leading to the formation of tetragonal β-In₂S₃.     

Fluorometric method for the determination of hydrogen peroxide and glucose with Fe3O4 as catalyst

In this paper, we utilized the instinct peroxidase-like property of Fe₃O₄ magnetic nanoparticles (MNPs) to establish a new fluorometric method for determination of hydrogen peroxide and glucose. In the presence of Fe₃O₄ MNPs as peroxidase mimetic catalyst, H₂O₂ was decomposed into radical that could quench the fluorescence of CdTe QDs more efficiently and rapidly. Then the oxidization of glucose by glucose oxidase was coupled with the fluorescence quenching of CdTe QDs by H₂O₂ producer with Fe₃O₄ MNPs catalyst, which can be used to detect glucose. Under the optimal reaction conditions, a linear correlation was established between fluorescence intensity ratio I₀/I and concentration of H₂O₂ from 1.8 × 10⁻⁷ to 9 × 10⁻⁴ mol/L with a detection limit of 1.8 × 10⁻⁸ mol/L. And a linear correlation was established between fluorescence intensity ratio I₀/I and concentration of glucose from 1.6 × 10⁻⁶ to 1.6 × 10⁻⁴ mol/L with a detection limit of 1.0 × 10⁻⁶ mol/L. The proposed method was applied to the determination of glucose in human serum samples with satisfactory results.     

Structure and properties of the CaFe2O4-type cobalt oxide CaCo2O4

The calcium cobalt oxide CaCo₂O₄ was synthesized for the first time and characterized from a powder X-ray diffraction study, measuring magnetic susceptibility, specific heat, electrical resistivity, and thermoelectric power. CaCo₂O₄ crystallizes in the CaFe₂O₄ (calcium ferrite)-type structure, consisting of an edge- and corner-shared CoO₆ octahedral network. The structure of CaCo₂O₄ belongs to an orthorhombic system (space group: Pnma) with lattice parameters, a=8.789(2) Å, b=2.9006(7) Å and c=10.282(3) Å. Curie-Weiss-like behavior in magnetic susceptibility with the nearly trivalent cobalt low-spin state (Co³⁺, 3d, S=0), semiconductor-like temperature dependence of resistivity (ρ=3×10⁻¹ Ω cm at 380 K) with dominant hopping conduction at low temperature, metallic-temperature-dependent large thermoelectric power (Seebeck coefficient: S=+147 μV/K at 380 K), and Schottky-type specific heat with a small Sommerfeld constant (γ=4.48(7) mJ/Co mol K²), were observed. These results suggest that the compound possesses a metallic electronic state with a small density of states at the Fermi level. The doped holes are localized at low temperatures due to disorder in the crystal. The carriers probably originate from slight off-stoichiometry of the phase. It was also found that S tends to increase even more beyond 380 K. The large S is possibly attributed to residual spin entropy and orbital degeneracy coupled with charges by strong electron correlation in the cobalt oxides.     

Crystal chemistry of M[PO2(OH)2]2·2H2O compounds (M=Mg, Mn, Fe, Co, Ni, Zn, Cd): Structural investigation of the Ni, Zn and Cd salts

The compounds M[PO₂(OH)₂]₂·2H₂O (M=Mg, Mn, Fe, Co, Ni, Zn, Cd) were prepared from super-saturated aqueous solutions at room temperature. Single-crystal X-ray structure investigations of members with M=Ni, Zn, Cd were performed at 295 and 120 K. The space-group symmetry is P2₁/n, Z=2. The unit-cell parameters are at 295/120 K for M=Ni: a=7.240(2)/7.202(2), b=9.794(2)/9.799(2), c=5.313(1)/5.285(1) Å, β=94.81(1)/94.38(1)°, V=375.4/371.9 Å³; M=Zn: a=7.263(2)/7.221(2), b=9.893(2)/9.899(3), c=5.328(1)/5.296(2) Å, β=94.79(1)/94.31(2)°, V=381.5/377.5 Å³; M=Cd: a=7.356(2)/7.319(2), b=10.416(2)/10.423(3), c=5.407(1)/5.371(2) Å, β=93.85(1)/93.30(2)°, V=413.4/409.1 Å³. Layers of corner-shared MO₆ octahedra and phosphate tetrahedra are linked by three of the four crystallographically different hydrogen bonds. The fourth hydrogen bond (located within the layer) is worth mentioning because of the short O_h?O bond distance of 2.57-2.61 Å at room temperature (2.56-2.57 Å at 120 K); only for M=Mg it is increased to 2.65 Å. Any marked temperature-dependent variation of the unit-cell dimension is observed only vertical to the layers. The analysis of the infrared (IR) spectroscopy data evidences that the internal PO₄ vibrations are insensitive to the size and the electronic configuration of the M²⁺ ions. The slight strengthening of the intra-molecular P-O bonds in the Mg salt is caused by the more ionic character of the Mg-O bonds. All IR spectra exhibit the characteristic “ABC trio” for acidic salts: 2900-3180 cm⁻¹ (A band), 2000-2450 cm⁻¹ (B band) and 1550-1750 cm⁻¹ (C band). Both the frequency and the intensity of the A band provide an evidence that the PO₂(OH)₂ groups in M[PO₂(OH)₂]₂·2H₂O compounds form weaker hydrogen bonds as compared with other acidic salts with comparable O?O bond distances of about 2.60 Å. The observed shift of the O-H stretching vibrations of the water molecule in the order M=Mg>Mn≈Fe≈Co>Ni>Zn≈Cd has been discussed with respect to the influence of both the character and the strength of M↔H₂O interactions.     

A fluorescence spectroscopic study of the interaction between epristeride and bovin serum albumine and its analytical application

A new spectrofluorimetric method to determine epristeride (EP) has been developed, which based on the EP has a strong ability to quench the intrinsic fluorescence of bovine serum albumin (BSA). There was the relationship between the fluorescence quenching intensity of BSA (ΔF = F_BSA − F_BSA-EP) and the concentration EP. The quenching mechanism was investigated with the quenching type, the association constants, the number of binding sites and basic thermodynamic parameters. The method had been successfully applied to the analysis of EP in real samples and the obtained results were in good agreement with the results of official method-HPLC.     

Synthesis and characterization of novel ion-imprinted polymeric nanoparticles for very fast and highly selective recognition of copper(II) ions

This work reports the preparation of new Cu²⁺ ion-imprinted polymeric nanoparticles using 1-hydroxy-4-(prop-2′-enyloxy)-9,10-anthraquinone (AQ) as a vinylated chelating agent. The Cu²⁺ ion found to form a stable 1:1 complex with AQ in methanol solution. The resulting Cu²⁺-AQ complex was copolymerized with ethyleneglycol dimethacrylate, as a cross-linking monomer, via precipitation polymerization method. The imprint copper ion was removed from the polymeric matrix using a 0.1 mol L⁻¹ HNO₃ solution. The Cu²⁺-imprinted polymeric nanoparticles were characterized by IR spectroscopy, scanning electron microscopy (SEM) and N₂ adsorption-desorption isotherms. The SEM micrographs showed colloidal nanoparticles of 60-100 nm in diameter and slightly irregular in shape. Optimum pH for maximum sorption was 7.0. Sorption and desorption of Cu²⁺ ion on the IIP nanoparticles were quite fast and achieved completely over entire investigated time periods of 2-30 min. Maximum sorbent capacity and enrichment factor of the prepared IIP for Cu²⁺ were 73.8 μmol g⁻¹ and 56.5, respectively. The relative standard deviation and limit of detection (C_LOD = 3S_b/m) of the method were evaluated as 2.6% and 0.1 ng mL⁻¹, using inductively coupled plasma-atomic emission spectrometry, respectively. It was found that the imprinting technology results in increased affinity of the prepared material toward Cu²⁺ ion over other metal ions with the same charge and close ionic radius. The relative standard deviations for six and twenty replicates with the same nanoparticles were found to be 1.7% and 2.1%, respectively.     

K2B12F12: A rare A2X structure for an ionic compound at ambient conditions

The anhydrous salt K₂B₁₂F₁₂ crystallized from aqueous solution and its structure was determined by single crystal X-ray diffraction. The Ni₂In-type structure it exhibits is rare for an A₂X ionic compound at 25 °C and 1 atm., consisting of an expanded hexagonal close-packed array of B₁₂F₁₂²⁻ centroids (cent?cent distances: 7.204-8.236 Å) with half of the K⁺ ions filling all of the O_h holes and half of the K⁺ ions filling all of the D_3h trigonal holes in the close-packed layers that are midway between two “empty” T_d holes. The structure is also unusual in that the bond-valence sum for the K⁺ ions in O_h holes is less than or equal to 0.73 (the bond-valence sum for the other type of K⁺ ion is 1.16). A variation of the Ni₂In structure is exhibited by the previously published monohydrate Cs₂(H₂O)B₁₂F₁₂, for which an improved structure is also reported here. For K₂B₁₂F₁₂: monoclinic, C2/c, a = 8.2072(8), b = 14.2818(7), c = 11.3441(9) Å, β = 92.832(5)°, Z = 4, T = 120(2) K. For Cs₂(H₂O)B₁₂F₁₂: orthorhombic, P2₁2₁2₁, a = 9.7475(4), b = 10.2579(4), c = 15.0549(5) Å, Z = 4, T = 110(1) K.     

Layer-by-layer self-assembly of polyelectrolyte complexes and their multilayer films for pervaporation dehydration of isopropanol

Two negatively charged polyelectrolyte complex colloidal nanoparticles (PEC⁻) and one positively charged nanoparticle (PEC⁺) were prepared and used as novel layer-by-layer (LbL) building blocks. These PEC nanoparticles include poly(2-methacryloyloxy ethyl trimethylammonium chloride)/sodium carboxymethyl cellulose (PDMC/CMCNa PEC⁻), poly(diallyldimethylammonium chloride)/CMCNa (PDDA/CMCNa PEC⁻) and PDDA/poly(sodium-p-styrenesulfonate) (PDDA/PSS PEC⁺). LbL multilayer films based on (PEC⁺/PEC⁻) were constructed on both quartz slides and modified polyamide (MPA) reverse osmosis support membranes. UV–vis spectroscopy, quartz crystal microbalance (QCM), field emission scanning microscopy (FESEM) and atomic force microscopy (AFM) were utilized to follow the thickness growth and morphology evolution of these multilayer films with increasing bi-layer numbers. LbL multilayer films deposited on MPA support membranes were subjected to pervaporation dehydration of 10 wt% water–isopropanol and effect of bi-layer numbers and feed temperature on pervaporation performance was studied. Generally, PEC⁺/PEC⁻ can be LbL self-assembled successfully on both substrates with a thickness growth rate ca. 200 nm/bi-layer. Moreover, PEC⁺/PEC⁻ multilayer films show high pervaporation performance with film thickness up to several micrometers. For example, performance of the multilayer films in dehydrating 10 wt% water–isopropanol at 50 °C is J = 1.18 kg/m² h, α = 1013 for (PEC⁺/PDMC-CMCNa PEC⁻)₂₄ and J = 1.36 kg/m² h, α = 938 for (PEC⁺/PDMC-CMCNa PEC⁻)₂₅, respectively.     

A chitosan–polypyrrole magnetic nanocomposite as μ-sorbent for isolation of naproxen

An extracting medium based on chitosan–polypyrrole (CS–PPy) magnetic nanocomposite was synthesized by chemical polymerization of pyrrole at the presence of chitosan magnetic nanoparticles (CS-MNPs) for micro-solid phase extraction. In this work, magnetic nanoparticles, the modified CS-MNPs and different types of CS–PPy magnetic nanocomposites were synthesized. Extraction efficiency of the CS–PPy magnetic nanocomposite was compared with the CS-MNPs and Fe₃O₄ nanoparticles for the determination of naproxen in aqueous samples, via quantification by spectrofluorimetry. The scanning electron microscopy images obtained from all the prepared nanocomposites revealed that the CS–PPy magnetic nanocomposite possess more porous structure. Among different synthesized magnetic nanocomposites, CS–PPy magnetic nanocomposite showed a prominent efficiency. Influencing parameters on the morphology of CS–PPy magnetic nanocomposite such as weight ratio of components was also assayed. In addition, effects of different parameters influencing the extraction efficiency of naproxen including desorption solvent, desorption time, amount of sorbent, ionic strength, sample pH and extraction time were investigated and optimized. Under the optimum condition, a linear calibration curve in the range of 0.04–10 μg mL⁻¹ (R² = 0.9996) was obtained. The limits of detection (3S_b) and limits of quantification (10S_b) of the method were 0.015 and 0.04 μg mL⁻¹ (n = 3), respectively. The relative standard deviation for water sample spiked with 0.1 μg mL⁻¹ of naproxen was 3% (n = 5) and the absolute recovery was 92%. The applicability of method was extended to the determination of naproxen in tap water, human urine and plasma samples. The relative recovery percentages for these samples were in the range of 56–99%.     

High-pressure synthesis and structural characterization of three new polyphosphides, α-SrP3, BaP8, and LaP5

Three novel metal polyphosphides, α-SrP₃, BaP₈, and LaP₅, were prepared in BN crucibles by the reaction of the respective stoichiometric mixtures under a high pressure of 3 GPa at 950-1000°C. Their crystal structures were determined from single-crystal X-ray data (α-SrP₃: space group C2/m, a=9.199(6) Å, b=7.288(3) Å, c=5.690(3) Å, β=113.45(4)°, Z=4, R₁/wR₂=0.0684/0.1180 for 471 observed reflections and 22 variables; BaP₈: space group P−1, a=6.762(2) Å, b=7.233(2) Å, c=8.567(2) Å, α=86.32(2)°, β=84.31(2)°, γ=70.40(2)°, Z=2, R₁/wR₂=0.0476/0.1255 for 2702 observed reflections and 82 variables; LaP₅: space group P2₁/m, a=4.885(1) Å, b=9.673(3) Å, c=5.577(2) Å, β=105.32(2)°, Z=2, R₁/wR₂=0.0391/0.1034 for 1272 observed reflections and 31 variables). α-SrP₃ is isostructural with SrAs₃ and the crystal structure consists of two-dimensional puckered polyanionic layers _∞²[P₃]²⁻ that stack along the c-axis yielding channels occupied by Sr²⁺ counterions. BaP₈ crystallizes in a new structure type which contains a three-dimensional infinite polyanionic framework _∞³[P₃]²⁻, with large channels hosting the barium cations. LaP₅ is a layered compound containing _∞²[P₅]³⁻ polyanionic layers separated by La³⁺ ions. All three compounds exhibit expected diamagnetic behaviors.     

Optical properties of bis(cyclopentadienyl)magnesium: excimer-type luminescence of the bis(cyclopentadienyl) ligand frame

The electronic spectra of solid MgCp₂ (Cp = cyclopentadienyl) show features which indicate the presence of intramolecular interligand interactions. The fluorescence of MgCp₂ (λ_max = 363 nm) undergoes a considerable Stokes shift which is apparently caused by a bonding attraction between both Cp rings in the excited state. An additional phosphorescence of the (Cp⁻)₂ fragment (λ_max = 535 nm) appears at 77 K.