Trace analysis of carbonyl compounds by liquid chromatography-mass spectrometry after collection as 2,4-dinitrophenylhydrazine derivatives.

This study describes the utilization of carbonyl- 2,4-dinitrophenylhydrazine (DNPH) derivatives for the determination of a micro amount of carbonyl compounds in air by liquid chromatography-mass spectrometry (LC-MS). After the carbonyl compounds are collected using a Waters Sep-Pak C18 cartridge column with-impregnated DNPH on octadecylsilica, they are eluted by acetonitrile as carbonyl-DNPH derivatives. A 20-mm3 aliquot of eluent is injected into the LC-MS system. The four derivatives (formaldehyde-, acetaldehyde-, acrolein- and acetone-DNPH) were eluted within 7 min with acetonitrile-water (60:40, v/v) as the mobile phase. The proposed method offers sub-ppb sensitivity and good reproducibility and was applied to the determination of these carbonyl compounds in actual air samples from store rooms, laboratories and offices. The relative standard deviations for these samples (n = 6) were 1 to 3%.     

Gas chromatography-mass spectrometry of carbonyl compounds in cigarette mainstream smoke after derivatization with 2,4-dinitrophenylhydrazine

An improved gas chromatography-mass spectrometry (GC-MS) method was described for the analysis of carbonyl compounds in cigarette mainstream smoke (CMS) after 2,4-dinitrophenylhydrazine (DNPH) derivatization. Besides formaldehyde, acetaldehyde, acetone, acrolein, propionaldehyde, methyl ethyl ketone, butyraldehyde, and crotonaldehyde that are routinely analyzed in cigarette smoke, this technique separates and allows the analysis of several C4, C5 and C6 isomeric carbonyl compounds. Differentiation could be made between the linear and branched carbon chain components. In cigarette smoke, the branched chain carbonyls are found at higher level than the linear chain carbonyls. Also, several trace carbonyl compounds such as methoxyacetaldehyde were found for the first time in cigarette smoke. For the analysis, cigarette smoke was collected using DNPH-treated pads, which is a simpler procedure compared to conventional impinger collection. Thermal decomposition of DNPH-carbonyl compounds was minimized by the optimization of the GC conditions. The linear range of the method was significantly improved by using a standard mixture of DNPH-carbonyl compounds instead of individual compounds for calibration. The minimum detectable quantity for the carbonyls ranged from 1.4 to 5.6 microg/cigarette.     

Simulataneous determination of carboxylic acids and carbonyl compounds in estuaries by HPLC

Summary A method for the determination of 22 low relative molecular mass oxocarboxylic acids and carbonyl compounds in estuarine and marine samples is described. After derivatization of 5 ml samples with 2,4-dinitrophenylhydrazine separation is performed on a RP-18 column by gradient elution and with UV-detection. The detection limit ranges from 17 ngl⁻¹ (glycolaldehyde) to 500 ngl⁻¹ (cyclohexanone). The method was established for routine analysis of samples taken in an estuarine ecosystem but can be used for other aqueous systems as well.     

超高效液相色谱串联质谱快速测定饮用水中9种N-亚硝胺的新方法

N-亚硝胺是潜在的人类致癌物,是近年来关注的一类饮用水消毒副产物,同时也是环境分析研究的热点.本文建立了超高效液相色谱(UPLC)串联质谱快速测定饮用水中9种N-亚硝胺的新方法,讨论了色谱柱和流动相对分离9种N-亚硝胺的影响,优化了多级反应质谱(MRM,MS/MS)条件.二甲基亚硝胺-d6为贮存和回收率内标,亚硝基二丙...     

Rapid and sensitive determination of acrylamide in drinking water by planar chromatography and fluorescence detection after derivatization with dansulfinic acid

On the basis of a novel derivatization, a new planar chromatographic method has been developed for the determination of acrylamide (AA) in drinking water at the ultra-trace level. After SPE, the water extracts were oversprayed on a high-performance thin-layer chromatography (HPTLC) silica gel plate with the derivatization agent dansulfinic acid and derivatized in situ. Chromatography was performed with ethyl acetate and the fluorescent product was quantified at 366/>400 nm. Verification was based on HPTLC-ESI/MS, HPTLC-direct analysis in real-time (DART)-TOF/MS and NMR. The routine HPTLC-fluorescence detection (FLD) method was validated for spiked drinking water. The regression analysis was linear (r >0.9918) in the range of 0.1-0.4 microg/L. LOD was calculated to be 0.025 microg/L and experimentally proved for spiked samples at levels down to 0.05 microg/L (S/N = 6) which was suited for monitoring the EU limit value of 0.1 microg/L in drinking water (0.5 microg/L demanded by World Health Organization (WHO)/US Environmental Protection Agency (EPA)). Within-run precision and the mean between-run precision (RSD, n = 3, three concentration levels each) were evaluated to be 4.8 and 11.0%, respectively. The mean recovery (0.1, 0.2, and 0.3 microg/L) was 96% corrected by the internal standard. The method, in comparison with HPLC-MS/MS showed comparable results and demonstrated the accuracy of the method.     

The reaction of carbonyl groups in polyethylene films—I: The reaction with 2,4-dinitrophenylhydrazine

A method is detailed for the study of the reaction of 2,4-dinitrophenylhydrazine with polyethylene films containing carbonyl groups. The difference between films u.v.-irradiated in air and those made with a ketone-containing copolymer is studied. There is also a study of the effects of thickness of film. Progress of reaction was monitored by u.v.-spectroscopy. The u.v. absorbance increased with time of immersion in the 2,4-dinitrophenylhydrazine solution, and with increasing thickness of film. An explanation is advanced for the difference between the two types of film: it is related to differences between the distribution of carbonyl groups through the films. Most of the carbonyl groups in the photo-oxidised films made from polyethylene were on the surface. There is evidence that 2,4-dinitrophenylhydrazine can penetrate and react throughout the films.     

On-line derivatization coupled to flow injection permanganate chemiluminescence detection of total carbonyl compounds in natural waters and drinking water

This work describes the development of a fast assay for the determination of low molecular weight carbonyl compounds based on the oxidative chemiluminescence of 2,4-dinitrophenylhydrazine with acidic permanganate, which is enhanced during conversion to the corresponding phenylhydrazone-carbonyl derivatives. By exploiting the common derivatization pathway and oxidation mechanism of phenylhydrazones under kinetically controlled conditions in a flow configuration, a common light emission is produced which corresponds to the total aqueous concentration of carbonyl compounds. The experimental conditions that afford the optimum analytical features were optimized for acetone, acetaldehyde and formaldehyde which constitute the most abundant carbonyl compounds in environmental samples. The method was successfully applied to the determination of total carbonyl content in natural waters and drinking water at the low μg L⁻¹ levels with satisfactory recoveries (94.0-99.5%) and very good reproducibility (RSD = 1.58-2.99%, n = 8, C = 2 μg L⁻¹). Validation of the results was performed with gas chromatography suggesting that the proposed method provides a fast alternative to the routine screening of low molecular weight carbonyl compounds in natural waters.     

Electroanalysis and determination of acetaldehyde in fuel ethanol using the reaction with 2,4-dinitrophenylhydrazine

The voltammetric reduction of acetaldehyde was studied in 0.1 M LiOH: LiCl (60: 40 v/v). Well-defined waves can be seen at −1.77 and −1.60 V with the use of hanging mercury and glassy carbon electrodes. Acetaldehyde was shown to react at room temperature with the 2,4-dinitrophenylhydrazine and the product exhibited a differential pulse voltammetric peak at −0.90 V, which was well separated from the peaks of the derivative. This allowed the indirect determination of acetaldehyde in the presence of 0.1 M ethanol/tetrabutylammonium perchlorate after 10 min of reaction. Calibration graphs were obtained for 1.00 × 10⁻⁶−1.00 × 10⁻⁴ M of acetaldehyde. The detection limit is 8.14 × 10⁻⁷ M. The method has been applied satisfactorily to the determination of total aldehyde in fuel ethanol samples without any pretreatment. The text was submitted by the authors in English.     

Rapid trace determination of radiostrontium in milk and drinking water

A rapid method for determining traces of radiostrontium in milk and drinking water is described. The technique involves a batch treatment of the milk sample with a cation exchanger (DOWEX 50W X8) followed by a solvent extraction with a crown ether (DC18C6) and a precipitation of SrCO₃. In the case of water, the strontium is extracted directly with the crown ether. The average separation yield is 74% for milk and 91% for water. The overall separation procedure takes about 8 hours. Activities as low as 0.03 Bq/1 can be determined with a low background GM-counter.     

Rapid determination of total trihalomethanes index in drinking water

A method for the rapid determination of total trihalomethanes (THMs) index in drinking water has been developed by using a headspace-mass spectrometry (HS-MS) system and partial least squares (PLS) multivariate regression approach. Due to the presence of residual amounts of chlorine and organic matter in the drinking water, the use of a quenching reagent in order to avoid THM generation during the sample manipulation is necessary. The optimization experiments revealed that ascorbic acid was the best quenching reagent compared with sodium thiosulfate and ammonium sulfate. The use of a classification chemometric technique as soft independent modeling of class analogy before the PLS regression improved the results obtained in the prediction of the total THMs index, lowering the relative standard error of prediction (RSEP) from 11.4% to lower than 6.0%. The results obtained by the proposed HS-MS method were compared with those provided by a conventional chromatographic method after analyzing 20 real drinking water samples. A good agreement in the results was observed and no systematic differences were found, which corroborates the good performance of the proposed method.     

Recent methods for the determination of volatile and non-volatile organic compounds in natural and purified drinking water

Four analytical protocols for the extraction and preconcentration of organic residues in natural or purified drinking water were investigated and compared: closed loop stripping analysis; simultaneous extraction-distillation; purge and trap analysis; continuous liquid-liquid extraction. Organic extracts were submitted to a variety of separation and identification techniques. Volatiles were determined by conventional capillary column gas chromatography with tandem mass spectrometry, using triple-stage quadrupole instruments. Non-volatile and thermally labile molecules were investigated by several different techniques (high-temperature gas chromatography, capillary column supercritical fluid chromatography, pyrolysis gas chromatography-mass spectrometry, thermospray liquid chromatography with tandem mass spectrometry and conventional fast-atom bombardment with tandem mass spectrometry). Several samples recently examined in the laboratory provide examples of this multitechnique approach for a more complete knowledge of the organic carbon distribution in water-dissolved organic matter, taking into account organic substances with widely different volatilities, polarities and thermal stabilities.     

In situ continuous derivatization/pre-concentration of carbonyl compounds with 2,4-dinitrophenylhydrazine in aqueous samples by solid-phase extraction: Application to liquid chromatography determination of aldehydes

A rapid and straightforward continuous solid-phase extraction system has been developed for in situ derivatization and pre-concentration of carbonyl compounds in aqueous samples. Initially 2,4-dinitrophenylhydrazine, the derivatizing agent, was adsorbed on a C₁₈ mini-column and then 15-ml of sample were continuously aspirated into the flow system, where the derivatization and pre-concentration of the analytes (low-molecular mass aldehydes) were performed simultaneously. Following elution, 20 μl of the extract were injected into a LC-DAD system, in which hydrazones were successfully separated in 12 min on a RP-C₁₈ column using a linear gradient mobile phase of acetonitrile-water of 60-100% acetonitrile for 8 min, flowing at 0.5 ml/min. The whole analytical process can be accomplished within ca. 35 min. Under optimum conditions, limits of detection were obtained between 0.3 and 1.0 μg/l and RSDs (inter-day precision) from 1.2 to 4.6%. Finally, some applications on water samples are presented with recoveries ranged from 95.8 to 99.4%.     

Rapid and simple HPLC determination of 5,5-dimethyl-2,4-oxazolidynedione in rabbit serum

A new method for the determination of 5,5-dimethyl-2,4-oxazolidynedione (DMO) in rabbit serum by reversed phase-HPLC with UV detection is described. The determination of DMO is performed without derivatisation. The internal standard is 5,5-diethylbarbituric acid (barbital). The method is rapid and simple with sensitivity limit of 20 ng/mL, high recovery (above 92%) and is suitable for pharmacokinetic studies.     

Determination of 11 low-molecular-weight carbonyl compounds in marine algae by high-performance liquid chromatography

A new analytical method is reported for the determination of 11 volatile carbonyl compounds isolated at room temperature from the headspace of marine algae. This method is based on the conversion of the carbonyl compounds to their 2,4-dinitrophenylhydrazone derivatives followed by high-performance liquid chromatography analysis. Using this method, 11 carbonyl compounds are detected and identified from the dynamic headspace sampling of 10 species of marine algae. Eight compounds are quantitated and the three remaining are only identified. Under optimized conditions, all carbonyl compounds are separated in 32 min. The detection and quantitation limits of the high-performance liquid chromatography method are, respectively, in the range of 0.26-0.85 ng/g of algae (formaldehyde) to 13.77-45.90 ng/g of algae (E)-2-hexenal. The calibration curves are linear in the concentration range of 2.0-1000 microg/L of solution, corresponding to 0.34-170.00 ng/g of algae. Acetaldehyde and propanal are the most abundant carbonyl compounds identified, with concentrations as high as 980 and 790 ng/g, respectively. The present work, as far as we know, is the first analytical methodology that has been developed to determine low-molecular-weight carbonyl compounds in marine algae. Because many species of marine algae are used as human food, the reported method should be useful to investigators studying the nutritional value as well as oxidative spoilage of fresh and preserved marine algae that is destined for human consumption.     

自来水中七种多环芳烃的快速测定

多环芳烃（PAH）在环境中分布广、浓度低，空气、土壤和水的样品中均能检出。PAH大都含有致癌和促进致癌的物质及变异性成分。世界卫生组织拟定了饮用水中六种有代表性多环芳烃总的最高可接受浓度为200ng／L。     

Anion-exchange initiation of reactions: Detection and spectrophotometric determination of aliphatic amines with 2,4-dinitrophenylhydrazine

The role of anion-exchange resin beads in the initiation of reactions of tertiary amines with 2,4-dinitrophenylhydrazine has been explored. This reagent has been used for the selective detection and determination of aliphatic amines. Radiochemical studies have been performed to show that the coloured species is adsorbed but not exchanged on ion-exchange beads. A model for the interaction is proposed.     

Rapid and sensitive spectrophotometric determination of cerium(IV) with 2,4-dihydroxy benzophenone benzoic hydrazone

A simple and sensitive spectrophotometric method for the determination of cerium(IV) in an aqueous medium is reported. The metal ion formed a 1:1 orange-red coloured complex with 2,4-dihydroxy benzophenone benzoic hydrazone (DHBPBH) at pH 10.0 showing an absorption maximum at 400 nm. The molar absorptivity and Sandell's sensitivity of the method are found to be 2.0 x 10(4)1/mol/cm and 0.007 mug/cm(2), respectively. Beer's law is obeyed in the range 0.7-7.0 mug/ml. Titanium, vanadium and molybdenum do not interfere. The extent of interferences by other ions is presented. The method is applied for the determination of cerium in simulated rock samples.     

Rapid and highly sensitive method for determination of methamphetamine and amphetamine in urine by electron-capture gas chromatography

A rapid and sensitive method for determination of methamphetamine and amphetamine in urine was developed by using electron-capture gas chromatography. The extraction procedure, the experimental conditions for pentafluorobenzoyl derivative formation and the percentage recovery of the drugs from urine are described. The pentafluorobenzoyl derivative of methamphetamine showed a higher electron-capture sensitivity and was detected in at least 23-fold lower concentration than the heptafluorobutyryl derivative which is commonly used as a derivatizing agent for the amine. The detection limit of pentafluorobenzoyl derivatives of methamphetamine and amphetamine was ca. 10 pg. A concentration as low as 10 ng/ml of methamphetamine and amphetamine in urine was easily detected by this method.