Zur Analyse von α-Sulfofettsäuremethylestern und Fettalkoholsulfoacetaten

The qualitative and quantitative analysis of sodium α-sulphofatty acid methylesters and sodium fatty alcohol sulphoacetates is described by means of some examples. Special attention has been payed to the problem of the separation from other detergents and to the identification by means of the IR- and NMR-spectra. The possibilities of the quantitative determination have been examined as well by gravimetric methods as by two-phase titration methods.     

Characterization of simulated vitrified highly active waste and its leachates by neutron activation

Neutron activation analysis (NAA) methods have been developed for the simultaneous determinations of multielement concentrations in various types of glass and their leachates. The epithermal instrumental NAA (EINAA) method involves the irradiation of samples in a Cd-shielded site for 2–5 min in order to determine levels of of up to 13 elements through their short-lived nuclides. Another 15 elements can be measured via their long-lived nuclides using conventional instrumental NAA (INAA). Accuracy of the methods have been evaluated by analyzing certified reference materials. The limits of detection for all elements are reported. The methods have been applied to sodium borosilicate and sodium calcium aluminosilicate glass samples in order evaluate their suitability as a host matrix for immobilizing high level radioactive waste.     

The detection of nitrate using in-situ copper nanoparticle deposition at a boron doped diamond electrode.

Electrochemical deposition from a 0.1 M sodium sulphate solution, containing Cu2+ (adjusted to pH 3 with hydrochloric acid) produced a well defined copper nanoparticle deposit on the surface of a boron doped diamond electrode. Changing conditions such as potential (-0.8, -1.0 and -1.2 V), time (5, 2 and 0.5 s) and concentration of Cu2+ (500, 250 and 100 microM) was found to give copper nanoparticles of varying size and particle density. The electrocatalytic properties of the copper surface towards nitrate reduction were explored. An in-situ copper nanoparticle production method was developed for the detection of nitrate; this involves electrodeposition, followed by linear sweep voltammetry for the reduction of nitrate and then application of a stripping potential to renew the electrode surface. The linear sweep was discovered to have homogenised the size of the nanoparticles but their number density was still dependant on the initial conditions of deposition. Some particles were still present at the surface after the stripping potential had been applied but repetitions of the procedure showed these did not have an effect on subsequent deposits. Optimisation of the method lead to applying a deposition potential of -0.8 V, at a BDD electrode for 5 s in a 0.1 M sodium sulphate solution (pH 3) containing 100 microM Cu2+ followed by a linear sweep at 1 V/s; this yielded a limit of detection of 1.5 microM nitrate. The analytical applicability of the technique was evaluated for nitrate detection in a natural mineral water sample and was found to agree well with that stated by the manufacturer.     

Studies on solvophobic interactions and micelle formation in non aqueous solvents

Micelle formation of various surfactants, such as sodium caprylate, sodium laurate, sodium palmitate and sodium stearate has been studied in organic solvents of various dielectric constants and intermolecular H-bonding capability, viz. molten acetamide, N-methyl acetamide (NMA) and N,N-dimethyl acetamide (DMA), at different temperatures by electrical conductivity and surface tension methods. Both methods show that micelles are formed in acetamide, NMA and DMA. Gibbs energy changes, enthalpies and entropies of micelle formation, respectively, have been determined by studying the variation of critical micelle concentration (c.m.c.) with temperature. Micelle formation in these solvents has been explained on the basis of several factors such as dielectric constant of the medium, its intermolecular H-bonding capability including solvophobic interaction.     

Calcium as a modulator of photosensitized killing of H9c2 cardiac cells.

Illumination of H9c2 rat heart cells in the presence of Rose Bengal resulted in dose-dependent cell killing (assessed by trypan blue staining) and modification of ionic currents flowing through the heart cell membrane. Inhibitors of voltage-gated ionic currents were shown to have little effect on cell killing. Ionic current measurements were used to assess the increase in leak conductance of these cells, which has been suggested to be a causal factor in killing of other cell types (1). Inhibitors of voltage-gated ionic currents, including the sodium channel blocker tetrodotoxin (100 microM) and the calcium channel blocker lanthanum (10 microM) were shown to have little effect on cell killing. The potassium channel inhibitor tetraethylammonium (20 mM) inhibited cell killing, but the effect is viewed as being caused by an inhibition of leak current. The time course of block of voltage-activated ionic currents during illumination, in the presence of Rose Bengal, was rapid compared with that for induction of leak current and for cell killing. These observations are consistent with a role for leak current in photosensitized killing of cardiac cells. They are interpreted with respect to calcium influx through the leak current pathway as a trigger for the cellular response.     

Compleximetric titration of aluminum and zirconium in siliceous materials after alkali fusion of samples

Rapid methods for the determination of zirconium and aluminum in siliceous materials are described. Samples are decomposed by sodium carbonate—sodium borate fusion and dissolved in perchloric acid. The zirconium is titrated directly with standard EDTA solution at 90–95 ° C in 1 M perchloric acid solution with xylenol orange as the indicator. Aluminum is then complexed by boiling with an excess of EDTA and the free EDTA is back-titrated potentiometrically with standard zinc solution. Interference of titanium in the aluminum determination is prevented by lactic acid masking. The methods have been applied successfully to a wide variety of glass-ceramics, refractories and NBS minerals.     

Sulfonylation from sodium dithionite or thiourea dioxide

The cheap and easily available sodium dithionite and thiourea dioxide have been used as the source of sulfonyl group in the synthesis of sulfones and sulfonamides recently.Compared with other methods for the sulfonylation reactions,the strategies using sodium dithionite or thiourea dioxide provide an alternative and complementary route to diverse sulfonyl compounds.During the reaction process,sulfur dioxide anion radical is the key intermediate,which is usually generated from a single electron transfer under suitable conditions.The advantages using sodium dithionite or thiourea dioxide in the sulfonylation reactions include mild conditions and broad substrate scope with excellent functional group compatibility.Further applications by using sodium dithionite and thiourea dioxide in organic transformations will be anticipated.     

Quantitative anodic generation of cobalt (III) at glassy carbon in acetic acid. Coulometric titrations with the generated reagent

Conditions are established for quantitative electrochemical generation of cobalt (III) at a glassy carbon working electrode in anhydrous acetic acid in the presence of potassium acetate, sodium acetate or sodium perchlorate. In anhydrous alkali-metal acetate solutions cobalt (III) is as stable as in the presence of acetic anhydride. The concentration of cobalt(III) in the solution is considerably decreased in the presence of small amounts of water. This phenomenon is much more pronounced in sodium perchlorate supporting electrolyte. Coulometric titration methods for the determination of hydroquinone, 2-methylhydroquinone and ascorbic acid with the generated oxidant have been developed. The errors of the determinations are less than ±2%.     

Effect of Various Methods of Curing on Concrete Using Crusher Dust as Replacement to Natural Sand

The present paper highlight upon research work is that curing is one of most important aspect of construction. The life of concrete and its serviceability depends heavily on curing. The method of curing applied on concrete will affect its final strength and durability. Owing to this fact this paper contains the research done on concrete under various curing methods. The standard method of curing concrete is done by water and results wastage of a lot of water. With the increase in the deficiency of availability of water, curing becomes a problem. Hence this research aims at providing better methods of curing which will not only improve the strength and durability of concrete but will also save water. The various methods that have been researched upon are plastic covered curing, addition of sodium silicate to curing water, and addition of curing compounds to curing water. The tests are carried on concrete with desirable strengths of M15 and M20. In this research the fine aggregate used in making of M15 and M20 concrete consists of a mixture of sand and crusher dust. Two mixes of ratio 50:50 and 60:40, sand to crusher dust have been taken and the effects of curing on these mixes are considered. Plastic curing is done by covering the concrete with plastic soon after demolding. Hence minimum water is required. The curing done by sodium silicate is done by adding 2% by weight of sodium silicate to curing water. Concrete is submerged in water containing sodium silicate. Once the concrete is cured, this water mix can be reused to cure freshly cast concrete, thereby saving more water. Curing by curing compounds is done in a similar way as that of curing with sodium silicate, only that instead of sodium silicate, curing compounds are used. The effect of these three methods on concrete is studied and discussions are made.     

Bromamine-T as a new oxidimetric titrant

A new oxidimetric titrant, bromamine-T (sodium salt of N-bromo-p-toluene sulphonamide), is introduced for use in aqueous medium. Direct potentiometric and visual indicator titration methods as well as back-titration procedures have been developed for the determination of a variety of substances.     

Capillary zone electrophoresis of amino acids on a hybrid poly(dimethylsiloxane)-glass chip

Poly(dimethylsiloxane) (PDMS)-PDMS and hybrid PDMS-glass devices have been characterized and compared in terms of current-voltage linearity, contact angle, electroosmotic velocity, electroosmotic mobility, and electrokinetic potential in dependence on the surface treatment. The hybrid PDMS-glass microfluidic devices have further been tested as on-chip capillary electrophoresis systems for the separation of fluorescently labeled amino acids. It has been demonstrated that different methods of surface pretreatment of the PDMS-glass devices result in significantly different separation performance, with plate numbers varying from 650 to 57 000 in dependence on the surface state and the nature of the amino acids. Electrophoretic separations of amino acids have been achieved within tens of seconds with detection limits of less than 2 microM (approximately 2 x 10(-16) to 2.5 x 10(-16) mol quantities at injection volumes of 110-120 pL). The detected amounts of fluorescein isothiocyante (FITC)-amino acids are at least ten times lower, since the amino acid:FITC ratio is 10:1 mol. The results demonstrate the perspective of such hybrid PDMS-glass microfluidic systems and the methods to modify their surfaces for on-chip separation methods for biomolecules.     

Thermometric titration in investigation of the formation of polyanions of molybdenum(VI), tungsten(VI), vanadium(V), and chromium (VI)-I: comparison of thermometric and potentiometric titration curves

A new twin-cell thermometric titrator has been devised and used for thermometric titration of solutions of sodium molybdate, sodium tungstate, sodium orthovanadate, ammonium metavanadate, and potassium chromate with perchloric acid. The thermometric titration curves were compared with corresponding pH-titration curves for elucidation of the reactions occurring in the titrations. Thermometric titrimetric methods have been developed for the determination of tungsten, vanadium and chromium.     

Micellar electrokinetic chromatography for simultaneous determination of six corticosteroids in commercial pharmaceuticals

We have developed a micellar electrokinetic chromatography (MEKC) method using bile salts for the simultaneous determination of six corticosteroids, including betamethasone, cortisone, prednisolone, 6alpha-methylprednisolone, triamcinolone, and prednisone. The separation was performed using borate buffer containing sodium cholate and sodium deoxycholate. Several parameters were studied, including bile salt concentrations, concentrations and pH of borate buffer, and analytical voltages. In method validation, calibration curves were linear over a range of 10-100 microM for each corticosteroid. The RSD (relative standard deviation) and RE (relative error) were all less than 5% for intra- and interday assays. The limit of detection of each analyte was 5 microM. The recoveries were greater than 95%. Application of this method for quality control of commercial tablets also proved to be feasible. All analytical values fall within the labeled amount of 90-110% for betamethasone and prednisolone, and of the labeled amount of 92.5-107.5% for 6alpha-methylprednisolone, as required by the United State Pharmacopeia 25 (USP 25).     

Liquid chromatographic methods for chloral hydrate determination

Liquid chromatographic methods, based on reversed-phase (RP) and anion-exchange mechanisms, have been developed for chloral hydrate determination. Both methods are preceeded by derivatization of chloral hydrate. For RP separations, different reagents [namely dansylhydrazine and o-(4-nitrobenzyl)hydroxylamine] have been studied, but the best results have been achieved using 1,2-benzenedithiol with UV detection at 220 nm. The anion-exchange method is based on derivatization with NaOH to form sodium formate that is then analyzed by anion-exchange, with suppressed conductivity detection. Derivatization conditions were optimized in order to reach the best yield of reaction. The optimization of the procedure allowed to determine chloral hydrate with detection limits as low as 0.2 μg/l with good linearity and reproducibility. The anion-exchange method was also applied for chloral hydrate determination in a drinking water sample. A preconcentration procedure has also been studied.     

Golmaenone, a new diketopiperazine alkaloid from the marine-derived fungus Aspergillus sp

A new diketopiperazine alkaloid, golmaenone (1). and related alkaloids, neoechinulin A (2). and L-alanyl-L-tryptophan anhydride (3). have been isolated from the culture broth of the marine-derived fungus Aspergillus sp. The structure and absolute stereochemistry of the new compound (1). was assigned by spectroscopic methods and the advanced Marfey's method. Compounds 1 and 2 exhibited a significant radical scavenging activity against 1,1-diphenyl-2-picrylhydrazyl (DPPH) with IC(50) values of 20 and 24 microM, respectively, which are similar to the positive control, ascorbic acid (IC(50), 20 microM). Compounds 1 and 2 also showed an ultraviolet-A (UV-A) (320--390 nm) protecting activity with ED(50) values of 90 and 170 microM, respectively, which are more active than oxybenzone (ED(50), 350 microM) currently being used as sunscreen.     

Nitrite and nitrate measurement in human urine by capillary electrophoresis.

Nitrite and nitrate have been widely used as markers for nitric oxide (NO) formation in vivo and represent the major NO oxidation products in biological fluids. In the present study, the use of capillary electrophoresis (CE) in the measurement of nitrite and nitrate in human urine is described. Urine samples were electrophoresed in an extended light path fused-silica capillary (104 cm; 75 microm ID) at an applied negative potential of 30 kV, and UV detection at 214 nm. Using electrokinetic sample injection (-6 kV x 20 s), we found that urine concentration, pH, sodium and chloride interfered with nitrite and nitrate detection. The detection of nitrite and nitrate was decreased when hydrodynamic sample injection was used (30 mbar x 60 s). However, basal levels of urinary nitrite (0.25 +/- 0.05 microM) and nitrate (591 +/- 115 microM) were detected and no interference by variations in urine concentration and pH was noted when hydrodynamic sample injection was used. Thus, hydrodynamic sample injection is convenient for the measurement of urinary nitrite and nitrate and avoids the effect of variations in urine matrices and pH on nitrite and nitrate detection.     

Purge-and-trap ion chromatography for the determination of trace ammonium ion in high-salinity water samples

It has always been assumed that purge-and-trap (P&T) method is only used for the analysis of volatile organic compounds (VOCs) in aqueous samples. In this paper, a novel P&T preconcentrator has been developed for the determination of trace amounts of ammonium ion in high-salinity water samples by ion chromatography (IC). Method performance is evaluated as a function of concentration of assistant purging material, purging time, and flow rate. Under the optimum P&T conditions with the purified nitrogen gas at flow rate 40 mL/min for 15.0 min at 40 degrees C, the overall collection efficiency is independent of the concentration of ammonium over the range 1.2-5.9 microM. The enrichment factor (EF) of ammonium correlates the ratio of the sample volume to the acceptor solution volume in the trap vessel, providing potentially unlimited increase of the ammonium signal. Our results indicate that environmental samples with low levels of ammonium in matrices with high concentrations of sodium can be easily analyzed and the detection limit down to 75 nM (1.35 ppb) level, corresponding to picomole of ammonia in the injected sample. Calibration graph was constructed with ammonium standards ranging from 0.05 to 6.0 microM and the linearity of the present method was good as suggested by the square of correlation coefficients being better than 0.997. Thus, we have demonstrated that the P&T-IC method allows the routine determination of ammonium ion in seawater samples without cation interferences.     

Hydride generation atomic fluorescence spectrometric determination of As, Bi, Sb, Se(IV) and Te(IV) in aqua regia extracts from atmospheric particulate matter using multivariate optimization

A highly sensitive and simple method, based on hydride generation and atomic fluorescence detection, has been developed for the determination of As, Bi, Sb, Se(IV) and Te(IV) in aqua regia extracts from atmospheric particulate matter samples. Atmospheric particulates matter was collected on glass fiber filters using a medium volume sampler (PM1 particulate matter). Two-level factorial designs have been used to optimise the hydride generation atomic fluorescence spectrometry (HG-AFS) procedure. The effects of several parameters affecting the hydride generation efficiency (hydrochloric acid, sodium tetrahydroborate and potassium iodide concentrations and flow rates) have been evaluated using a Plackett-Burman experimental design. In addition, parameters affecting the hydride measurement (delay, analysis and memory times) have been also investigated. The significant parameters obtained (sodium tetrahydroborate concentration, sodium tetrahydroborate flow rate and analysis time for As; hydrochloric acid concentration and sodium tetrahydroborate flow rate for Se(IV); and sodium tetrahydroborate concentration and sodium tetrahydroborate flow rate for Te(IV)) have been optimized by using 2ⁿ + star central composite design. Hydrochloric acid concentration and sodium tetrahydroborate flow rate were the significant parameters obtained for Sb and Bi determination, respectively. Using a univariate approach these parameters were optimized. The accuracy of methods have been verified by using several certified reference materials: SRM 1648 (urban particulate matter) and SRM 1649a (urban dust). Detection limits in the range of 6 × 10⁻³ to 0.2 ng m⁻³ have been achieved. The developed methods were applied to several atmospheric particulate matter samples corresponding to A Coruña city (NW Spain).     

Micellar electrokinetic chromatography with laser-induced fluorescence detection for rapid and sensitive analysis of two new bioactive reagents using dynamic covalent coating

A simple, rapid, selective, and sensitive micellar electrokinetic chromatography (MEKC) with laser-induced fluorescence detection (LIF) method was developed, using hexamethyldisilazane (HMDS) as dynamic covalent coating (DCC), for the analysis of two new bioactive agents N-n-hexyl-N'-(sodium p-aminobenzenesulfonate) thiourea (HXPT) and N-n-undecyl-N'-(sodium p-aminobenzenesulfonate) thiourea (UPT) derivatized with 4-chloro-7-nitrobenzo-2-oxa-1,3-diazole. MEKC methods both not using DCC and using DCC were investigated. In a series of optimization steps, DCC and a running buffer of 20 mM Na2B4O7 + 16 mM SDS + 8% acetonitrile were applied for determination of the derivatives. Linear relationships for HXPT and UPT were obtained in the range of 5 to 100 microM (correlation coefficient: 0.9986 for HXPT, 0.9978 for UPT), and the detection limits for HXPT and UPT were 16.5 and 39.0 ng mL(-1). The sensitivity was improved over that of fluorescence spectroscopy methods. The method was applied to the analysis of the two reagents in lab water waste with recoveries in the range of 95.6-107.5%.     

Interaction of Cu+ with mitochondria.

The uptake of Cu+ by rat liver mitochondria is rapid and extensive. Respiration is stimulated by 10 microM Cu+ then inhibited and the inhibition could not be relieved with uncoupling agents. Collapse of the membrane potential is induced by 5-10 microM Cu+. These effects are partially inhibited by radical scavengers indicating the involvement of radical production in these events. Reduction of the GSH content and production of peroxidation products by higher amounts of Cu+ was also demonstrated. Swelling of non-respiring rat liver and heart mitochondria in sodium or lithium acetate was used to study effects of Cu+ on the Na+/H+ exchanger. Swelling is stimulated by 5-100 microM Cu+. In the presence of a radical scavenger the swelling is reduced. In sodium nitrate media diltiazem-sensitive stimulated swelling is observed. Amiloride was found to inhibit Cu(+)-induced efflux of Ca2+. At high concentrations of Cu+, a general increase in permeability was the dominant feature.