Linear concentration dependence of vibrational width and vibrational dephasing paths in aqueous nitrate solutions

A theoretical model of vibrational dephasing of Raman active ions in aqueous electrolyte solutions is presented in which a probe ion is coupled to the bath by direct ion-solvent and ion-ion interactions. Expression for the vibrational width in terms of concentrations and efficiencies of the vibrational frequency modulation by ion-perturber interactions is given in the fast modulation scheme. The observed linear concentration dependence of the vibrational dephasing width of the v ₁(A'₁) mode of NO₃ ^- in aqueous solutions is reasonably well explained from this model, and efficiencies of the dephasing paths through NO₃ ^--water hydrogen bonding interaction and contact NO₃ ^--cation pair formation interaction are estimated. Anions in the solution give only a secondary effect to nitrate vibrational dephasing because of interionic repulsive forces.     

Vibrational spectroscopic studies of the structure of di‐amino acid peptides. Part II: cyclo(L‐Asp‐L‐Asp) in the solid state and in aqueous solution

Solid‐state protonated and N,O‐deuterated Fourier transform infrared (IR) and Raman scattering spectra together with the protonated and deuterated Raman spectra in aqueous solution of the cyclic di‐amino acid peptide cyclo(L ‐Asp‐L ‐Asp) are reported. Vibrational band assignments have been made on the basis of comparisons with previously cited literature values for diketopiperazine (DKP) derivatives and normal coordinate analyses for both the protonated and deuterated species based upon DFT calculations at the B3‐LYP/cc‐pVDZ level of the isolated molecule in the gas phase. The calculated minimum energy structure for cyclo(L ‐Asp‐L ‐Asp), assuming C₂ symmetry, predicts a boat conformation for the DKP ring with both the two L ‐aspartyl side chains being folded slightly above the ring. The CO stretching vibrations have been assigned for the side‐chain carboxylic acid group (e.g. at 1693 and 1670 cm⁻¹ in the Raman spectrum) and the cis amide I bands (e.g. at 1660 cm⁻¹ in the Raman spectrum). The presence of two bands for the carboxylic acid CO stretching modes in the solid‐state Raman spectrum can be accounted for by factor group splitting of the two nonequivalent molecules in a crystallographic unit cell. The cis amide II band is observed at 1489 cm⁻¹ in the solid‐state Raman spectrum, which is in agreement with results for cyclic di‐amino acid peptide molecules examined previously in the solid state, where the DKP ring adopts a boat conformation. Additionally, it also appears that as the molecular mass of the substituent on the C^α atom is increased, the amide II band wavenumber decreases to below 1500 cm⁻¹; this may be a consequence of increased strain on the DKP ring. The cis amide II Raman band is characterized by its relatively small deuterium shift (29 cm⁻¹), which indicates that this band has a smaller N H bending contribution than the trans amide II vibrational band observed for linear peptides. Copyright © 2009 John Wiley & Sons, Ltd.     

Raman Intensity of the v C=O Band in Hydrogen Bonded Complexes Involving Ethylformate and Phenol Derivatives

The hydrogen bonded complexes between carbonyl bases and hydroxylic derivatives have been extensively studied by infrared spectrometry; by comparison very little Raman data have been reported in the literature. Some qualitative measurements on the v _C=O band of acetone dissolved in water-tetrachloride mixtures have been performed by Singurel¹. Quantitative data on the absolute Raman intensity have been obtained for complexes involving cyclohexanone², acetone, acetophenone³ and methylacetate⁴. For these systems, hydrogen bond formation brings about a moderate intensity enhancement of the v _C=O band. In this work the Raman intensity of the v _C=O band of ethylformate (EtFo) complexed with phenol derivatives is investigated.     

Raman fingerprint of the interaction of K+ with the COO− group of zwitterionic alanine

The interaction of K⁺ with the zwitterionic form of alanine (ZAla) is investigated using Raman spectroscopy and density functional theory calculations. The Raman spectra of an aqueous solution of Ala and its mixture with KOH at different molar concentrations [ZAla + xKOH, x = 1–5 M] have been recorded in the spectral region 400–1800 cm⁻¹. The wavenumber position of the band at ~529 cm⁻¹ shows a red shift of 14 cm⁻¹, while the Raman band at ~634 cm⁻¹ shows a blue shift of 10 cm⁻¹ with the increasing x from 1 to 5 M. The intensity ratio I₆₃₄/I₅₂₉ is increased with increasing x, and it could be because of the increase in concentration of the [ZAla + K⁺] complex in the solution. The new Raman band appeared at ~1079 cm⁻¹ in the Raman spectra of [ZAla + xKOH, x = 1–5] complex. To determine the most probable site for the interaction of K⁺ with ZAla, the structures of ZAla and the [ZAla + K⁺] were optimized at B3LYP/6‐311++G(d,p) level of theory. The electrostatic potential calculation carried out for ZAla reveals that the maximum density of electron is lying over COO⁻, and therefore, COO⁻ would be the most probable site for the interaction of K⁺ with ZAla. The theoretically calculated Raman spectra of ZAla, [ZAla + K⁺] and the [ZAla⁻ + K⁺] are in good agreement with experimentally observed Raman spectra. Thus, the Raman bands at ~529, 634, and 1079 cm⁻¹ may be used as the Raman fingerprint for the interaction of K⁺ with COO⁻ of the ZAla and ZAla⁻. Copyright © 2015 John Wiley & Sons, Ltd.     

Electrochemical in situ surface enhanced Raman spectroscopic characterization of a trinuclear ruthenium complex,Ru‐red

To study the fate of a molecular di‐μ‐oxo‐bridged trinuclear ruthenium complex, [(NH₃)₅Ru–O–Ru(NH₃)₄–O–Ru(NH₃)₅]⁶⁺, also known as Ru‐red, during the electro‐driven water oxidation reaction, electrochemical in situ surface enhanced Raman spectroscopy (SERS) investigations have been conducted on an electrochemically roughened gold surface in acidic condition. It was previously described that on a basal plane pyrolitic graphite electrode in 0.1 M H₂SO₄ aqueous solution, Ru‐red undergoes one electron oxidative conversion into a stable higher oxidation state ruthenium complex, Ru‐brown, at <1.0 V (vs normal hydrogen electrode (NHE)), and this leads to water oxidation and dioxygen release, but the fate of Ru‐red during electrochemistry was not studied in much detail. In this investigation, Ru‐red dispersed in acid electrolyte and immobilized on a roughened gold electrode without Ru‐red in solution has been subjected to anodic controlled potential experiments, and in situ SERS was carried out at various potentials in succession. The electrochemical SERS data obtained for Ru‐red are also compared with in situ SERS results of an electrodeposited ruthenium oxide thin film on the Au disk. Our study suggests that on a gold electrode in sulfuric acid solution containing Ru‐red, one electron oxidative conversion of Ru‐red to a higher oxidation state ruthenium compound, Ru‐brown, occurs at ca. 0.74 V (vs NHE), as supported by the electrochemical in situ SERS experiments. Moreover, at higher potentials and on Au disk, the Ru‐red / Ru‐brown are not stable and slowly decompose or electro‐oxidize leading to deactivation of the tri‐ruthenium catalytic system in acidic medium. Copyright © 2013 John Wiley & Sons, Ltd.     

Vibrational Spectroscopic Studies of Molecules with Biochemical Interest: The Cysteine Zwitterion

Abstract

The L-cysteine zwitterions in the orthorhombic crystal structure and in aqueous solution, including the deuterated isotopologues HSCD₂CH(NH₃ ⁺)COO^?, DSCH₂CH(ND₃ ⁺)COO^?, and DSCD₂CH(ND₃ ⁺)COO^?, have been studied by mid-infrared, far-infrared, and Raman spectroscopy. Density functional theory (DFT) calculations were performed for an equilibrium molecular geometry of the cysteine zwitterion to obtain vibrational frequencies of fundamental modes, infrared (IR) and Raman intensities, and the depolarization ratio of the Raman bands and combined with normal coordinate force field analyses. The force field obtained for dissolved (in H₂O and D₂O) cysteine, based on the 4 × 36 experimental fundamental modes of the four isotopologues, was successfully transferred to the two conformers in the solid state. The experimentally observed multiple bands (generally doublets) of L-cysteine and its deuterated isotopologues in the solid state were interpreted based on the coexistence of two conformers in the unit cell. The calculated frequencies were used for full assignments of the fundamental IR and Raman vibrational transitions, including an attempt to interpret all low-frequency vibrations (below 400 cm^?1) of the zwitterion also in the solid state. In particular, the hydrogen bonding effects on conformation, bond lengths, and force constants were studied, including those of the distorted NH₃ ⁺ amino group. The –S-H and -S-D stretching vibrations were found to be local modes, not sensitive to deuterium substitution of the -CH₂ and -NH₃ ⁺ groups in the molecule or to the H(D)-S-C-C torsional angle. The two major -S-H or -S-D stretching bands observed in the solid state correspond to different S-H/D bond lengths and resulted in the force constants K _SH = 3.618 N·cm^?1 and 3.657 N·cm^?1 for the SH^… S and SH^… O hydrogen-bonded interactions. A remarkable result was that the S(H)^… O interaction was weaker than the S(H)^… S interaction in the solid state and even weaker in aqueous solution, K _SH = 3.715 N·cm^?1, possibly due to intramolecular interactions between the thiol and amino groups. A general correlation between the S-H/D bond length and vibrational frequency was developed, allowing the bond length to be estimated for sulfhydryl groups in, for example, proteins. The C-S stretching modes were fitted with different C-S stretching force constants, K _CS = 3.213 and 2.713 N·cm^?1, consistent with the different CS bond lengths for the two solid-state conformers.     

Four-wave mixing spectroscopy of aqueous suspensions of single-wall carbon nanotubes in the ranges of 0.1–10 and 100–250 cm<Superscript>−1</Superscript>

Distinctive optical properties of single-wall carbon nanotubes (SWNT) are highly sensitive to variations in the environment. Here, we have studied SWNT in aqueous suspensions at a low (less than 0.1 μg ml⁻¹) concentration by four-wave mixing (FWM) spectroscopy in the spectral bands of 0.1 to 10 cm⁻¹ (≈300 GHz) and 100 to 250 cm⁻¹ (3 to 7.5 THz). We directly investigated the hydration layers around SWNT. A comparison of the FWM spectra of an SWNT aqueous suspension and Milli-Q water shows a considerable increase in the intensity of low-frequency Raman modes, which are attributed to the rotational transitions of H₂O₂ and H₂O molecules. We explain the observed phenomenon by the hydrogen peroxide production and formation of a low-density depletion layer at the water-nanotube interface. We have observed several SWNT radial breathing modes ω _RBM =118.5, 164.7, and 233.5 cm⁻¹ in an SWNT aqueous suspension and estimated the corresponding SWNT diameters as ≈2.0, 1.5, and 1 nm.     

Vibrational properties of levulinic acid and furan derivatives: Raman spectroscopy and theoretical calculations

In this work, the Raman spectra of furan, furfuryl alcohol (FA), furfural, hydroxymethylfurfural (HMF), and levulinic acid were obtained in the 500 to 4000 cm⁻¹ spectral region at room temperature. Vibrational wavenumbers were calculated for these compounds with the B3LYP method using the 6‐31 + G(2df,p) basis set. The experimentally determined CC and C C wavenumbers for furan and furan derivatives were in good agreement with the calculated wavenumbers without scaling factor, while the calculated CO and C H wavenumbers at ∼1660 and 3000 cm⁻¹, respectively, showed larger deviations from the measured ones. The Raman spectra for furan and furan derivatives showed intense CC bands, whereas the levulinic acid spectrum showed intense C H vibrations with broad doublet CO bands. We also found that an empirical method based on the chemical structure similarities is able to predict the HMF Raman spectrum from the combined furfural and FA spectra. Copyright © 2011 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the hydrogen‐arsenate mineral pharmacolite Ca(AsO3OH)·2H2O—implications for aquifer and sediment remediation

The removal of arsenate anions from aqueous media, sediments and wasted soils is of environmental significance. The reaction of gypsum with the arsenate anion results in pharmacolite mineral formation, together with related minerals. Raman and infrared (IR) spectroscopy have been used to study the mineral pharmacolite Ca(AsO₃OH)· 2H₂O. The mineral is characterised by an intense Raman band at 865 cm⁻¹ assigned to the ν₁ (AsO₃)²⁻ symmetric stretching mode. The equivalent IR band is found at 864 cm⁻¹. The low‐intensity Raman bands in the range from 844 to 886 cm⁻¹ provide evidence for ν₃ (AsO₃) antisymmetric stretching vibrations. A series of overlapping bands in the 300‐450 cm⁻¹ region are attributed to ν₂ and ν₄ (AsO₃) bending modes. Prominent Raman bands at around 3187 cm⁻¹ are assigned to the OH stretching vibrations of hydrogen‐bonded water molecules and the two sharp bands at 3425 and 3526 cm⁻¹ to the OH stretching vibrations of only weakly hydrogen‐bonded hydroxyls in (AsO₃OH)²⁻ units. Copyright © 2009 John Wiley & Sons, Ltd.     

DFT study and quantitative detection by surface‐enhanced Raman scattering (SERS) of ethyl carbamate

Ethyl carbamate (EC), a potentially toxic compound, is found in alcoholic beverages and fermented foodstuff. A combined experimental and theoretical study of Raman on EC is reported in this work for the first time. The Raman bands observed for EC in solid phase are characteristic for the carbonyl group, C―C, C―H and N―H stretching and deformation vibrations. These spectral features coupled with a pKa study allowed establishing the neutral species of EC present in the aqueous solutions experimentally tested at different concentrations. In addition, by performing a density functional theory study in the gas phase, the calculated geometry, the harmonic vibrational modes, and the Raman scattering activities of EC were found to be in good agreement with our experimental data and helped establish the surface‐enhanced Raman scattering (SERS) behavior and EC adsorption geometry on the silver surfaces. The Raman peak at 1006 cm⁻¹, assigned to the υ_s(CC) + ω(CH) modes, the strongest and best reproducible peak in the SERS spectra, was used for a quantitative evaluation of EC. The limit of detection, which corresponds to a signal‐to‐noise ratio equal to 3, was found to be 2 × 10⁻⁷ M (17.8 µg l⁻¹). SERS spectra obtained by using hydroxylamine hydrochloride‐reduced silver nanoparticles provide a fast and reproducible qualitative and quantitative determination of EC in aqueous solution. Copyright © 2013 John Wiley & Sons, Ltd.     

Effects of concentrated NaCl and KCl solutions on the behaviour of aqueous peptide bond environment: single-particle dynamics and H-bond structural relaxation

The effects of salt concentrations on the structure, dynamics and hydrogen bond structural relaxation properties of ～1.10 M aqueous N-methylacetamide (NMA) solution at 308 K are studied by classical molecular dynamics simulations. We have considered the concentration range of salts solution from 0.222 to 3.756 M to investigate the behaviour of aqueous environment of peptide bonds in the presence of concentrated NaCl and KCl solution. It is found that the addition of salt solution facilitates the structural breaking of aqueous NMA hydrogen bonds, as a result the number of hydrogen bonds per NMA molecule and their stability decreases. The water and NMA molecule shows slower translational and rotational dynamics with increasing salt concentrations due to additional ion atmospheric friction. Our result shows that the cation–O_NMA radial distribution function decreases whereas the Cl^?─H_NMA radial distribution function increases with ion concentration. On the other hand, the cation–O_water and Cl^?─H_water radial distribution function shows very negligible change with respect to ion concentration. We have also calculated NMA–water and water–water hydrogen bond structural relaxation times. It is observed that the hydrogen bond structural relaxation of O_NMA─H_water is comparatively slower than the H_NMA─O_water hydrogen bond, which can be attributed to higher number and greater stability of the former hydrogen bond than the latter. The change of the dynamical quantities observed here is more prominent in addition of NaCl rather than the KCl solution.     

Vibrational Spectroscopic Characterization of the Arsenate Mineral Barahonaite: Implications for the Molecular Structure

The mineral barahonaite is in all probability a member of the smolianinovite group. The mineral is an arsenate mineral formed as a secondary mineral in the oxidized zone of sulphide deposits. We have studied the barahonaite mineral using a combination of Raman and infrared spectroscopy. The mineral is characterized by a series of Raman bands at 863 cm^?1 with low wavenumber shoulders at 802 and 828 cm^?1. These bands are assigned to the arsenate and hydrogen arsenate stretching vibrations. The infrared spectrum shows a broad spectral profile. Two Raman bands at 506 and 529 cm^?1 are assigned to the triply degenerate arsenate bending vibration (F ₂, ν₄), and the Raman bands at 325, 360, and 399 cm^?1 are attributed to the arsenate ν₂ bending vibration. Raman and infrared bands in the 2500–3800 cm^?1 spectral range are assigned to water and hydroxyl stretching vibrations. The application of Raman spectroscopy to study the structure of barahonaite is better than infrared spectroscopy, probably because of the much higher spatial resolution.     

Measurement of the Raman polarizability anisotropy for the v = 1 pure rotational Raman transition in H 2 by rotational Raman spectroscopy

A combination of stimulated Raman pumping and rotational Raman spectroscopy is used to accomplish the first measurement of the polarizability anisotropy γ_11,13 (355 nm) for the S₁₁ (1) transition in molecular hydrogen H₂. Saturation of the Q₀₁(1) transition connecting the |X¹ Σ⁺ _g, v = 0, J = 1 > state to the |X¹ Σ⁺ _g, v = 1, J = 1 > state in H₂ by stimulated Raman pumping is the critical element in this experiment. The observed intensities of the rotational Raman lines for these states allow an estimate of γ_11,13 (355 nm) as 0.358 ± 0.004 ų. A comparison of this value to that obtained from fundamental ab initio calculations in H₂ also is possible for the first time.     

IR/Raman spectroscopy and DFT calculations of cyclic di‐amino acid peptides. Part III: comparison of solid state and solution structures of cyclo(L‐Ser‐L‐Ser)

B3‐LYP/cc‐pVDZ calculations of the gas‐phase structure and vibrational spectra of the isolated molecule cyclo(L ‐Ser‐L ‐Ser), a cyclic di‐amino acid peptide (CDAP), were carried out by assuming C₂ symmetry. It is predicted that the minimum‐energy structure is a boat conformation for the diketopiperazine (DKP) ring with both L ‐seryl side chains being folded slightly above the ring. An additional structure of higher energy (15.16 kJ mol⁻¹) has been calculated for a DKP ring with a planar geometry, although in this case two fundamental vibrations have been calculated with imaginary wavenumbers. The reported X‐ray crystallographic structure of cyclo(L ‐Ser‐L ‐Ser), shows that the DKP ring displays a near‐planar conformation, with both the two L ‐seryl side chains being folded above the ring. It is hypothesized that the crystal packing forces constrain the DKP ring in a planar conformation and it is probable that the lower energy boat conformation may prevail in the aqueous environment. Raman scattering and Fourier‐transform infrared (FT‐IR) spectra of solid state and aqueous solution samples of cyclo(L ‐Ser‐L ‐Ser) are reported and discussed. Vibrational band assignments have been made on the basis of comparisons with the calculated vibrational spectra and band wavenumber shifts upon deuteration of labile protons. The experimental Raman and IR results for solid‐state samples show characteristic amide I vibrations which are split (Raman: 1661 and 1687 cm⁻¹, IR: 1666 and 1680 cm⁻¹), possibly due to interactions between molecules in a crystallographic unit cell. The cis amide I band is differentiated by its deuterium shift of ∼30 cm⁻¹, which is larger than that previously reported for trans amide I deuterium shifts. A cis amide II mode has been assigned to a Raman band located at 1520 cm⁻¹. The occurrence of this cis amide II mode at a wavenumber above 1500 cm⁻¹ concurs with results of previously examined CDAP molecules with low molecular weight substituents on the C^α atoms, and is also indicative of a relatively unstrained DKP ring. Copyright © 2009 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the metatellurate mineral: xocomecatlite Cu3TeO4(OH)4

The mineral xocomecatlite is a hydroxy metatellurate mineral with Te⁶⁺ O₄ units. Tellurates may be subdivided according to their formula into three types of tellurate minerals: type (a) (AB)_m (TeO₄)_pZ_q, type (b) (AB)_m(TeO₆)^·xH₂O and (c) compound tellurates in which a second anion including the tellurite anion, is involved. The mineral xocomecatlite is an example of the first type. Raman bands for xocomecatlite at 710, 763 and 796 cm⁻¹, and 600 and 680 cm⁻¹ are attributed to the ν₁(TeO₄)²⁻ symmetric and ν₃ antisymmetric stretching mode. Raman bands observed at 2867 and 2926 cm⁻¹ are assigned to TeOH stretching vibrations and enable estimation of the hydrogen bond distances of 2.622 Å (2867 cm⁻¹), 2.634 Å (2926 cm⁻¹) involving these OH units. The hydrogen bond distances are very short implying that they are necessary for the stability of the mineral. Copyright © 2008 John Wiley & Sons, Ltd.     

The hydrogen‐bond effect on the high pressure behavior of hydrazinium monochloride

The first high pressure study of solid hydrazinium monochloride has been performed by in situ Raman spectroscopy and synchrotron X‐ray diffraction (XRD) experiments in diamond anvil cell (DAC) up to 39.5 and 24.6 GPa, respectively. The structure of phase I at room temperature is confirmed to be space group C2/c by the Raman spectral analysis and Rietveld refinement of the XRD pattern. A structural transition from phase I to II is observed at 7.3 GPa. Pressure‐induced position variation of hydrogen atoms in NH₃⁺ unit during the phase transition is attributed to the formation of N―H…Cl hydrogen‐bonds, which play a vital role in the stability and subsequent structural changes of this high energetic material under pressure. This inference is proved from the abnormal pressure shifts and obvious Fermi resonance in NH stretching mode of N₂H₅⁺ ion in the Raman experiment. Finally, a further transition from phase II to III accompanied with a slight internal distortion in the N₂H₅⁺ ions occurs above 19.8 GPa, and phase III persists up to 39.5 GPa. Copyright © 2015 John Wiley & Sons, Ltd.     

Raman‐induced Kerr effect spectroscopy of single‐wall carbon nanotubes aqueous suspensions in the range 0.1–10 and 100–250 cm−1

Here, we study a low (less than 0.1 µg/ml) concentration aqueous suspension of single‐wall carbon nanotubes (SWNTs) by Raman‐induced Kerr effect spectroscopy (RIKES) in the spectral bands 0.1–10 and 100–250 cm⁻¹. This method is capable of carrying out direct investigation of SWNT hydration layers. A comparison of RIKES spectra of SWNT aqueous suspension and that of milli‐Q water shows a considerable growth in the intensity of low wavenumber Raman modes. These modes in the 0.1–10 cm⁻¹ range are attributed to the rotational transitions of H₂O₂ and H₂O molecules. We explain the observed intensity increase as due to the production of hydrogen peroxide and the formation of a low‐density depletion layer on the water–nanotube interface. A few SWNT radial breathing modes (RBM)are observed (ω_RBM = 118.5, 164.7 and 233.5 cm⁻¹) in aqueous suspension, which allows us to estimate the SWNT diameters (∼2.0, 1.5, and 1 nm, respectively). Copyright © 2011 John Wiley & Sons, Ltd.     

Raman spectroscopic study of the selenite mineral: ahlfeldite,NiSeO3·2H2O

Raman spectroscopy has been used to study the selenite mineral ahlfeldite. A comparison is made with the Raman spectra of chalcomenite, cobaltomenite and clinochalcomenite. Selenite minerals are characterised by the position of the symmetric stretching mode which is observed at higher wavenumbers than the anti‐symmetric stretching mode. The selenite ion has C_3v symmetry and four modes, 2A₁ and 2E. These modes are observed at 813, 472 cm⁻¹ (A₁) and 685, 710, 727 and 367 and 396 cm⁻¹ (E). Bands assigned to the water stretching vibrations are observed for ahlfeldite at 3385 cm⁻¹, for chalcomenite at 2953, 3184 and 3506 cm⁻¹ and for clinochalcomenite at 2909, 3193 and 3507 cm⁻¹. A comparison of the Raman spectra of chalcomenite, clinochalcomenite and cobaltomenite is made. The position of these bands enabled hydrogen bond distances in the selenite structure to be estimated. Hydrogen bond distances for ahlfeldite, chalcomenite and clinochalcomenite were determined to be similar. Copyright © 2008 John Wiley & Sons, Ltd.     

Bimodal dependence of light scattering/fluctuations on the concentration of aqueous solutions

Two concentration ranges (from 10^?5 to 10^?9 and from 10^?13 to 10^?18 M) corresponding to enhanced fluctuations of Rayleigh and Raman scattering of second-harmonic (527 nm) pulses of YVO₄:Nd³⁺ laser are found for aqueous solutions of antioxidant potassium phenosan. A correlation is revealed between the rise in elastic Rayleigh scattering intensity and its fluctuations and the shift of the center of OH Raman band of water toward the ice component characteristic frequency (3200 cm^?1). The development of phase-equilibrium instabilities is analyzed based on the model of fluctuations of the number of hydrogen bonds on the assumption of formation/destruction of ordered hydration layer of phenosan molecules in water.