聚苯胺粒子悬浮液的电流变特性

将聚苯胺作为分散粒子，电绝缘油 分散介质组成电流变流体，研究了电场强度，温度等因素与ＥＲＦ的静态屈服应力和电流密度的关系。结果表明：τｓ和ｉ随电场强度的变化皆成指数关系。     

Synthesis and electrorheological characterization of emulsion-polymerized dodecylbenzenesulfonic acid doped polyaniline-based suspensions

The electrorheological (ER) properties of dodecylbenzenesulfonic acid (DBSA) doped polyaniline suspensions in silicone oil were investigated. In contrast to chemically polymerized polyaniline in an acidic aqueous medium by oxidation polymerization, we adopted an emulsion polymerization technique in which aniline is polymerized in an emulsion of water and a nonpolar (or weakly polar) organic solvent. The effects of electric field strength and particle concentration on the ER properties of DBSA-doped polyaniline suspensions in silicone oil were then examined. Rheological measurements were also carried out using a rotational rheometer with a high-voltage generator in both controlled shear rate and shear stress modes, and the results showed that the ER properties were enhanced by increasing the particle concentration and electric field. Received: 23 August 1999 Accepted: 6 April 2000     

Electrorheological characteristics of polyaniline/titanate composite nanotube suspensions

In this paper, one-dimensional polyaniline/titanate (PANI/TN) composite nanotubes were synthesized by in situ chemical oxidative polymerization directed by block copolymer. These novel nanocomposite particles were used as a dispersed phase in electrorheological (ER) fluids, and the ER properties were investigated under both steady and dynamic shear. It was found that the ER activity of PANI/TN fluids varied with the ratio of aniline to titanate, and the PANI/TN suspensions showed a higher ER effect than that made by sphere-like PANI/TiO₂ nanoparticles. These observations were well interpreted by their dielectric spectra analysis; a larger dielectric loss enhancement and a faster rate of interfacial polarization were responsible for a higher ER activity of nanotubular PANI/TN-based fluids.     

高活性聚苯胺电流变液的制备与性能研究

高活性聚苯胺电流变液的制备与性能研究官建国，谢洪泉，过俊石（华中理工大学化学系，武汉，４３００７４）关键词电流变液，聚苯胺，反掺杂，电荷迁移极化电流变液（ＥＲＦ）是重要的人工智能材料和高效机电一体化的功能液体［１］．目前，研究ＥＲＦ技术的关键是提高Ｅ...     

聚合条件对聚甲基丙烯酸盐体系ER效应的影响

用反相乳液聚合直接合成了具有高电流变（ＥＲ）活性的聚甲基丙烯酸盐（ＳＰＭＡＡ）的悬液。研究了影响ＥＲ效应的因素，结果阐明了该体系中的水分在ＥＲ效应中的作用。     

Synthesis,Characterization and Electrorheological Properties of Polyaniline/Titanate Core-Shell Composite

In this study, a facile method was developed for the preparation of a new conducting polymer composite with core-shell structure. The surfaces of layered titanate (K₂Ti₄O₉) particles were first modified with 3-aminopropyltriethoxysilane, and then a polyaniline/titanate (PANI/K₂Ti₄O₉) composite was synthesized via chemical oxidative polymerization. The resulting composites were characterized by SEM, XRD, FTIR and TG measurements. The results indicated that the PANI deposited on the surface of K₂Ti₄O₉ particles resulted in the formation of the composite with a core-shell structure. TG analysis showed that the composite containing 28.7 wt% PANI had better thermal stability than that of pure PANI. Further, the PANI/K₂Ti₄O₉ composite particles were adopted as a dispersed phase in silicone oil for electrorheological (ER) investigation. Suspension of the composite particles exhibited typical ER behavior subjected to an external electric field under steady and dynamic oscillatory shear.     

THE RHEOLOGICAL PROPERTIES OF POLYANILINE SOLUTION

This paper presents our work on the rheological properties of the solution of polyaniline(PAn) in N-methyl-2-pyrrolidone (NMP). The result s indicate that the solution's non-Newtonian property becomes more prominent with the increase in solution-oncentration,exhibiting the behavior of pseudo-plastic fluid. Besides, there is a critical concentration C.(around 0.06 g/ml), beyond which the viscosity of the PAn/NMP solution takes a suddenincrease. With temperature rising, both the viscosity and the thixotropy of the solutiondecrease, implying that there exist physical cross-linking interactions between the molecularchains in the solution.     

聚苯胺类电流变体的稳态剪切流动分析

对聚苯胺、及聚苯胺/聚丙烯酸盐复合粒子的稳态剪切流动行为进行了综合考察.结果表明, 在交流电场下,电流变体的剪切应力和剪切速率的关系符合Bingham流体形为.并对此现象进行了分析,提出用非理想塑性体的新模型来描述交流电场下聚苯胺类电流变体的稳态剪切流动.     

Electrorheological characteristics of polyaniline and its copolymer suspensions with ionic and nonionic substituents

Electrorheological (ER) characteristics of ER fluids, composed of suspensions of semiconducting polyaniline and two different copolyaniline particles in silicone oil, were determined experimentally. Ionic sodium diphenylamine sulfonate and nonionic o-ethoxyaniline were used to synthesize copolyanilines, i.e. N-substituted copolyaniline and poly(aniline-co-o-ethoxyaniline), respectively. ER fluids composed of these three different polymers were compared with respect to their rheological properties under an applied electric field. It was found that ER fluids containing a copolymer with an ionic group exhibited the highest ER performance among polyaniline and its copolymer systems in a shear-rate region above 1 s⁻¹. Received: 22 February 1999 /Accepted in revised form: 25 August 1999     

BaTiO_3包覆粉煤灰漂珠/聚苯胺复合材料的制备及电流变性能

首先利用原位化学氧化聚合法将聚苯胺包覆在粉煤灰漂珠表面(FAFB/PAn),再利用低温溶胶凝胶-水热法制备BaTiO_3包覆FAFB/PAn的复合材料(FAFB/PAn/BaTiO_3),形成内核为空心漂珠、外壳依次为导电层、绝缘层的核/壳结构.采用FTIR、XRD、SEM、数字式四探针以及LCR介电谱仪对FAFB/PAn/BaTiO_3复合材料的结构与性能进行分析;以FAFB/PAn/BaTiO_3为分散相制备的电流变液,对其悬浮性及外加电场下的剪切应力进行测试.FTIR和XRD结果证明了利用本文的实验方法可成功将PAn和BaTiO_3引入到FAFB表面.电导率测试结果表明,复合材料电导率为7.8×10~(-4)S·cm~(-1),相对BaTiO_3提高了近2个数量级.在1~2000 k Hz交变电场频率测试范围内,FAFB/PAn/BaTiO_3具有相对较好的介电性能:当f=1 k Hz时εr最大为598,随电场频率的增加介电常数逐渐减小,对应的介电损耗tanδ最大为1.14,且随电场频率的增加介电损耗逐渐减小,当f=200 k Hz时tanδ=0.75,后趋于平稳.比较了7天的悬浮稳定性发现,FAFB/PAn稳定性最好,悬浮率可达88%,而包覆BaTiO_3后与纯BaTiO_3相当,仅为60%.在电场作用下FAFB/PAn/BaTiO_3表现出较明显的电流变性能,即当E=4.0 k V/mm时,剪切应力达631 Pa,且具有较好的抗击穿能力.     

聚羧酸盐和聚萘磺酸盐分散剂在高浓度水悬浮剂中的应用

研究了聚羧酸盐分散剂(SD-819)和聚萘磺酸盐分散剂(SD-661)在水溶液中的表面性能;同时考察了分散剂添加量对500 g/L扑草净水悬浮剂(SC)中的吸附、Zeta电势和流变性能等的影响.结果表明,与分散剂SD-661相比,分散剂SD-819水溶液中的表面张力(γcmc)小,临界胶束浓度(cmc)和胶束生成自由能(ΔGmic)低,吸附量大,制备出的扑草净SC黏度低,流动性好,触变性优良.结果表明,聚羧酸盐分散剂更适用于高浓度扑草净SC的制备.     

Electrorheological effect of carbonaceous materials with hierarchical porous structures

Carbonaceous materials with different hierarchical porous structures for electrorheological (ER) dispersed phase have been synthesized by carbonization of as-prepared starch/silica precurser at different temperatures. The N₂ adsorption isotherms show that Cmeso-700 and Cmeso-500 particles have the BET surface areas of 1028 and 603 m² g⁻¹, respectively. They both have the mesoporous pores with size of about 4.6 nm and the microporous pores (1.1 and 1.5 nm, respectively). The BET surface areas and C/O atomic ratio of porous carbon materials can be increased with the carbonization temperatures. The rheological measurements indicate that the Cmeso-700 and Cmeso-500 ERF have the better ER effect resulted from their hierarchical porous structures. The shear stress of Cmeso-700 ERF is 900 Pa at 1000 s⁻¹ under 3 kV mm⁻¹, which is almost 4.5 times larger than that of Cmicro-350 ERF. The mesoporous carbon ERFs also show the better sedimentation stability than microporous carbon ERFs. The different ER effect of carbonaceous particles may derive from their different dielectric polarization property induced by the hierarchical porous structures.     

Polyaniline microsphere encapsulated by poly(methyl methacrylate) and investigation of its electrorheological properties

Microspheres consisting of a poly(methyl methacrylate) (PMMA) shell wrapping the conductive polyaniline (PANI) particle as a core were prepared by an in-situ suspension polymerization method and then adopted as an electrorheological (ER) material. The polymerization reaction and encapsulation were confirmed by Fourier transform infrared spectrum analysis. The rod-like PANI particles were synthesized via an emulsion polymerization protocol and observed by transmission electron microscopy. In addition, a spherical shape of encapsulated PANI/PMMA (core/shell) microspheres was observed by scanning electron microscopy. The thermal stability of PANI/PMMA particles was examined by use of thermogravimetric analysis. The PANI/PMMA particle-based suspension in silicone oil exhibited typical ER behavior. The conductivity of PANI/PMMA particles was much lower than that of the rod-like PANI.     

Supercritical fluid extraction of Kava lactones from Kava root and their separation via supercritical fluid chromatography

Summary Seven Kava lactones were extracted from Kava root using both pure and 15% ethanol modified CO₂. Most of the Kava lactones were extracted employing 100% CO₂ with an efficiency greater than 90% relative to conventional solvent extraction using organic solvents. Extraction efficiency did not increase significantly when using 15% ethanol-modified CO₂ as an extraction fluid. Separation of extracted Kava lactones was obtained using various packed columns and methanol-modified CO₂. An optimized separation was achieved using either an amino or protein C₄ column at 125 atm and 80°C. Semi-preparative separation of Kava lactones was also obtained using two columns connected in series.     

含氰基离子液体的合成、表征及流变性质研究

摘要合成、 表征了一系列新的含氰基咪唑类离子液体. 测定了该离子液体的密度、 熔点及溶解性等物理性质, 研究了其在稳态、 瞬态和动态条件下的流变行为. 结果表明, 当剪切速率在0.1～50 s^-1范围内时, 其粘度不随剪切速率的变化而变化, 但随温度升高而降低, 粘流活化能随取代基长度变化呈现规律性变化. 对于1-丁基-3-氰乙基咪唑六氟磷酸盐离子液体, 维持剪切速率不变时, 其剪切应力和粘度均不随时间变化, 且随着温度的升高而降低; 在动态条件下, 在线性粘弹区, 复合粘度和损耗模量G″ 随温度升高而降低. 关键词     

Development of a body fluid identification multiplex via DNA methylation analysis

The goal of this study is to develop an epigenetic multiplex for body fluid identification based on tissue specific DNA methylation. A series of genetic loci capable of discerning the origin of DNA as coming from saliva, blood, vaginal epithelia, or semen were used for this application. The markers – BCAS4, CG06379435, VE_8, and ZC3H12D – were amplified together and then sequenced via pyrosequencing. Methylation values for cytosine guanine dinucleotide (CpG) sites at each locus were then measured across the four markers. In total, 124 samples were collected, and bisulfite modified to convert unmethylated DNA to uracil. This converted DNA was then amplified via multiplex PCR with reverse primers containing a biotin molecule. Biotinylated PCR products were then analyzed using pyrosequencing to generate a series of pyrograms containing 18 CpG sites. The percent methylation at each CpG site was determined, and then agglomerative hierarchical cluster analysis was used to create a model to indicate sample origin. Further analysis reduced the number of CpG sites required for optimal determination of body fluid type to five. This study demonstrates an efficient multiplexed body fluid identification process utilizing DNA methylation that can be easily implemented in forensic laboratories.     

Synthesis and electrorheology of camphorsulfonic acid doped polyaniline suspensions

 Semiconducting camphorsulfonic acid doped polyaniline (PANI–CSA) particles were synthesized by chemical oxidation polymerization, and their chemical structure and particle size were examined via Fourier transform IR spectroscopy and scanning electron microscopy, respectively. Electrorheological (ER) fluids were prepared by dispersing the PANI–CSA particles in silicone oil, and their steady-shear rheological properties under electric fields were investigated using a rotational rheometer with a high-voltage generator. The PANI–CSA synthesized in this study possesses typical ER behavior:shear stress increases with increasing electric field strengths. Received: 31 August 2000 Accepted: 6 April 2001     

Modulating the rheological response of shear thickening fluids by variation in molecular weight of carrier fluid and its correlation with impact resistance of treated p-aramid fabrics

The present study deals with the effect of molecular weight of carrier fluid on the rheological behaviour of shear thickening fluid (STF) and impact energy absorption by treated p-aramid fabrics. High molecular weight polyethylene glycols (HMW-PEG: 1000, 3000 and 6000 g mol⁻¹) were individually added to a mixture of PEG 200 and PEG 600 to prepare ternary mixtures of carrier fluids. Increase in average molecular weight of the carrier fluid via addition of PEG 1000 and PEG 3000 enhanced the dilatant behaviour of STF. On the other hand, addition of PEG 6000 led to a rheological response inferior to that obtained via addition of PEG 3000 owing to solidification of the former at room temperature resulting in fusion of silica particles. However, an inverse relation was observed between the rheological behaviour of HMW-PEG based STFs and impact resistance of p-aramid fabrics treated with them. The diminution in impact energy absorption occurred due to lubrication effect caused by long polymer chains of HMW-PEG. On the other hand, fusion of solidified PEG 6000 and silica particles created rough microstructures over the yarn surface, which enhanced inter-yarn friction, resulting in improved impact energy absorption.     

Preparation and characterization of aqueous polyaniline battery using a modified polyaniline electrode

A rechargeable battery of the type Zn/ZnCl₂, NH₄Cl/polyaniline (PAn)-reticulated vitreous carbon was successfully prepared based on a PAn modified electrode. Voltage of the battery was 1.2 V. Charge-discharge behavior at a constant load of 2.5 k, recycle ability and the rate of self-discharge were measured. The results showed that the battery has a capacity of 121 mA h g⁻¹ polymer weight and coulombic efficiency was in the range between 75% and 100%. Self-discharge rate was less than 1% per day and the battery showed a good recycle ability. It was also found that even after 70 cycles, the decrease in the open-circuit voltage was less than 5%.