Synthesis and Hydrogenation of 1,2-1,4-1,2-Stereotriblock Polybutadienes and the Study of Their Properties

The effects of various polar modifiers, their concentration, and the polymerization temperature on the microstructure of poly-butadiene obtained during anionic polymerization using lithium α-methyl naphthalene as the bifunctional initiator were studied. 1,2-1,4-1,2-Stereotriblock polybutadiene was synthesized by polymerization in cyclohexane to a certain conversion and polymerization was completed in the presence of diethylene glycol dimethyl ether. The microstructure of the stereotriblock copolymer was characterized by IR and ¹H-NMR. GPC showed that the stereo-block polybutadiene has a narrow MWD. Two T_g's of the copolymer with higher molecular weight exist, as shown by dynamic mechanical test. The stereotriblock copolymer was hydrogenated using cobalt 2-ethyl hexanoate and triisobutyl aluminum as the catalyst. The hydrogenated product was shown to be a (butene-1-ethylene-butene-1) triblock copolymer which consists of more than 30% crystallinity and exhibits the behavior of a thermoplastic elastomer. The relationship between stress-strain properties arid the contents of the blocks was also studied.     

Studies on the self-assembly behavior of the amphiphilic block copolymer of PSt-b-PAA in apolar solvents with polar fluorescent probe

The block copolymer of polystyrene-b-poly(butyl acrylate) (PSt-b-PBA) with a well-defined structure was synthesized by atom transfer radical polymerization (ATRP); its structure was characterized, and the living polymerization was also validated by gel permeation chromatography, Fourier transform infrared, and ¹H NMR measurements. Then, the amphiphilic block copolymer of polystyrene-b-poly(acrylic acid) (PSt-b-PAA) has been prepared by hydrolysis of PSt-b-PBA, and copolymers of PSt-b-PAA with longer PSt blocks and shorter PAA blocks were obtained by controlling the conditions of ATRP polymerization. The reversed micelle solution of PSt-b-PAA in toluene was prepared by using the single-solvent dissolving method, and the reverse micellization behavior of PSt-b-PAA in toluene was mainly investigated in this paper. The fluorescent probe technique was used by using polar fluorescence compound N-(1-Naphthyl)ethylenediamine dihydrochloride (NEAH) as a polar fluorescent probe to study the reverse micellization behavior of PSt-b-PAA. It was found that the reverse micellization behaviors of PSt-b-PAA in toluene can be clearly revealed by using NEAH as a polar fluorescence probe, and the critical micelle concentrations (cmcs) can be well displayed. The experimental results showed that the self-assembling behavior of PSt-b-PAA in toluene depends apparently on the microstructure of the macromolecules and is also influenced by the temperature. For the copolymers of PSt-b-PAA with the same length of hydrophobic PSt blocks, the copolymer with a longer hydrophilic block PAA has lower cmc, and at higher temperature, the copolymer has lower cmc.     

A New Cyanofluorene–Triphenylamine Copolymer: Synthesis and Photoinduced Intramolecular Electron Transfer Processes

A new π‐conjugated copolymer, namely, poly{cyanofluore‐alt‐[5‐(N,N′‐diphenylamino)phenylenevinylene]} ((CNF–TPA)_n), was synthesized by condensation polymerization of 2,2′‐(9,9‐dioctyl‐9H‐fluorene‐2,7‐diyl)diacetonitrile and 5‐(N,N′‐diphenylamino)benzene‐1,3‐dicarbaldehyde by using the Knoevenagel reaction. By design, diphenylamine, alkylfluorene and poly(p‐phenylenevinylene) linkages were combined to form a (CNF–TPA)_n copolymer which exhibits high thermal stability and glass‐transition temperature. Photodynamic measurements in polar benzonitrile indicate fast and efficient photoinduced electron transfer (≈10¹¹ s^?1) from triphenylamine (TPA) to cyanofluorene (CNF) to produce the long‐lived charge‐separated state (90 μs). The finding that the charge‐recombination process of (CNF^.?–TPA^.+)_n is much slower than the charge separation in polar benzonitrile suggests a potential application in molecular‐level electronic and optoelectronic devices.     

Copolymers of 7-Methoxy-2-Acetyl Benzofuryl Methylmethacrylate With Styrene: Synthesis,Characterization, Reactivity Ratios and Determination of Kinetic Parameters With Thermogravimetric Analysis

The 7-methoxy-2-acetyl benzofuryl methylmethacrylate (MABMM) monomer was synthesized by reacting 7-methoxy-2-bromo acetyl benzofurane with sodium methacrylate in acetonitrile solvent at 70°C in the presence of triethylbenzylammoniumchloride (TEBAC). The monomer was characterized by FTIR, ¹H-and ¹³C-NMR spectral studies. Reactivity ratios for the copolymers 7-methoxy-2-acetyl benzofuryl methylmethacrylate (MABMM)-co- styrene (ST) are reported. Copolymers were prepared by free radical polymerization using 2,2′-azobisisobutyronitrile (AIBN) as an initiator at 70°C in 1,4-dioxane solution. FTIR, ¹H-and ¹³C-NMR spectral studies and gel permeation chromatography (GPC) were used the copolymer characterization. The monomer compositions in the copolymer were determined by elementel analyses and the reactivity ratios (ri) were calculated applying diverse linear methods, namely Finemann-Ross (FR) and Kelen-Tüdös (KT) and the nonlinear error invariable model method of a computer program RREVM. By using the latter pr°Cedure, the values of the reactivity ratios were estimated as 2.74 and 0.69 for the system MABMM (1) and ST (2), respectively. These values suggest the formation of nearly-alternating copolymers in the systems. Molecular weights were determined by gel permeation chromatography (GPC). The polydispersity indices of the polymers determined using suggest a strong tendency for chain termination by disproportionation. The glass transition temperature of the polymers were investigated by Shimadzu DSC-60 and the apparent thermal decomposition activation energies (E_d) were calculated by the Ozawa method using the Perkin-Elmer TGA thermobalance, respectively. Tg increases when the concentration of polar monomer (MABMM) in the copolymer increases. It was observed that thermal stabilities of copolymers increased with increasing of MABMM content in copolymers.     

Compatibilization of copolymers in solution through interchain hydrogen bonding

Low concentrations of polar units interacting through hydrogen bonds were introduced in polystyrene and polyvinylacetate chains by free radical copolymerization. Phase diagrams of copolymer mixtures in tetrahydrofuran were investigated. The influences on cloud-point isotherms of polar comonomer nature and concentration, and of copolymer molecular weight were studied. Viscometry appears to be reliable for evaluating the interactions betwen the different copolymers synthesized.     

Swelling Characterization of the Superabsorbent Copolymer in the Petroleum-Based Solvent-Water Mixtures

The crosslinked and porous copolymer grains were synthesized by inverse suspension polymerization of acrylamide. The synthesized copolymer was characterized by Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscopy (SEM). It was achieved to absorbed 418 g water by 1 g copolymer after 5 min waiting time. Moreover, it was seen that about 99% of water was absorbed by 1 g copolymer in the solvent water mixtures (300 mL solvent–200 mL distilled water) after 2.5 min waiting time. The diffusion coefficients of the copolymer in the solvent-water mixtures were found between 8.87 · 10⁴ and 10.64 · 10⁴ cm²s^?1. Furthermore, the copolymer in distilled water achieved to reach a high value of the diffusion coefficient (13.2 · 10⁴ cm²s^?1).     

Distannylated Bithiophene Imide: Enabling High-Performance n-Type Polymer Semiconductors with an Acceptor–Acceptor Backbone

A distannylated electron-deficient bithiophene imide (BTI-Tin) monomer was synthesized and polymerized with imide-functionalized co-units to afford homopolymer PBTI and copolymer P(BTI-BTI2), both featuring an acceptor–acceptor backbone with high molecular weight. Both polymers exhibited excellent unipolar n-type character in transistors with electron mobility up to 2.60 cm² V⁻¹ s⁻¹. When applied as acceptor materials in all-polymer solar cells, PBTI and P(BTI-BTI2) achieved high power-conversion efficiency (PCE) of 6.67 % and 8.61 %, respectively. The PCE (6.67 %) of polymer PBTI, synthesized from the distannylated monomer, is much higher than that (0.14 %) of the same polymer PBTI*, synthesized from typical dibrominated monomer. The 8.61 % PCE of copolymer P(BTI-BTI2) is also higher than those (<1 %) of homopolymers synthesized from dibrominated monomers. The results demonstrate the success of BTI-Tin for accessing n-type polymers with greatly improved device performance.     

Biotinylated Poly(3-Hexylthiophene-co-3-Methanolthiophene): A Langmuir Monolayer-Forming Copolymer

Abstract

Copolymers of 3-substituted thiophenes have been synthesized by organosynthetic routes. The chemical synthesis of the copolymer was carried out by dehydrogenation of 3-hexylthiophene and 3-methanolthiophene. Attachment of biotin to the resulting copolymer, poly(3-hexylthiophene-co-3-methanolthiophene) [PMHT], is accomplished by room temperature esterification using N,N-dicyclohexylcarbodiimide (DCC) and 4-pyrrolidinopyridine as catalyst. The resulting copolymers have well-defined chemical and electronic structures and molecular weights. The biotinylated copolymer forms a stable monolayer at the air-water interface due to the polar groups along the polymer backbone.     

Blends of Aromatic Polyethers Bearing Polar Pyridine Units and Their Evaluation as High Temperature Polymer Electrolytes

Aromatic polyethers containing polar pyridine units in the main chain have been synthesized using different difluoride monomers. Copolymers of 2,5-(4′,4″dihydroxy biphenyl)-pyridine and 3,3′,5,5′-tetramethyl-[1,1′-biphenyl]-4,4′-diol with bis(4-fluorophenyl) sulfone or phenyl phosphine oxide difluoride or decafluorobiphenyl (PTMPySF, PTMPyPO, PTMPyDF) were synthesized. These polymeric structures despite their common structural characteristics, showed totally different behavior in terms of solubility and acid doping ability. Blends of these copolymers have been prepared in order to be evaluated in terms of fuel cell relevant parameters like acid doping ability and conductivity. In most cases flexible membranes were obtained by solution casting. The acid doping ability was controlled based on the blend constituents and composition. The doped membranes exhibited high conductivity values, in the range of 10⁻³ S/cm at room temperature which is increased at 2.5 × 10⁻² S/cm at temperatures up to 180 °C.     

Properties of Methacrylic Acid–Methyl Acrylate Copolymers of Varied Structure

Physicomechanical and surface properties of films of copolymers of methacrylic acid with methyl acrylate, which have close compositions and molecular masses (M_n ≈ 5.7 × 10⁴) and various chain structures (gradient copolymer and statistical copolymer), were studied. The thermodynamic characteristics of the copolymers were determined; two glass-transition points (29.6 and 141.0°C) were found for the gradient copolymer, and one glass-transition point of 40.1°C, for the copolymer with a statistical distribution of units along the chain. It was found that more mechanically strong films with tensile stress of 2.8 MPa are characteristic of the gradient copolymer. The wetting method was used to determine by using the Hood–Kaelble–Dann–Fowkes approach the surface Gibbs energies of the films and their polar and dispersion components. Atomic-force microscopy was used to find heterogeneities (0.1–0.3 μm) on the surface of a film of a statistical copolymer, whereas the film of a gradient polymer has a homogeneous structure.     

Distannylated Bithiophene Imide: Enabling High‐Performance n‐Type Polymer Semiconductors with an Acceptor–Acceptor Backbone

A distannylated electron‐deficient bithiophene imide (BTI‐Tin) monomer was synthesized and polymerized with imide‐functionalized co‐units to afford homopolymer PBTI and copolymer P(BTI‐BTI2), both featuring an acceptor–acceptor backbone with high molecular weight. Both polymers exhibited excellent unipolar n‐type character in transistors with electron mobility up to 2.60 cm² V^?1 s^?1. When applied as acceptor materials in all‐polymer solar cells, PBTI and P(BTI‐BTI2) achieved high power‐conversion efficiency (PCE) of 6.67 % and 8.61 %, respectively. The PCE (6.67 %) of polymer PBTI, synthesized from the distannylated monomer, is much higher than that (0.14 %) of the same polymer PBTI*, synthesized from typical dibrominated monomer. The 8.61 % PCE of copolymer P(BTI‐BTI2) is also higher than those (<1 %) of homopolymers synthesized from dibrominated monomers. The results demonstrate the success of BTI‐Tin for accessing n‐type polymers with greatly improved device performance.     

Hydroxyethyl Starch-g-Poly-(N,N-dimethylacrylamide-co-acrylic acid): An efficient dye removing agent

Hydroxyethyl Starch-g-Poly-(N,N-dimethylacrylamide-co-acrylic acid) was synthesized by solution polymerization technique using potassium peroxydisulfate (K₂S₂O₈) as the initiator at 90 °C. The synthesized graft copolymer was characterized by FTIR, NMR (both ¹H and ¹³C) Spectroscopy, molecular weight determination by GPC, TGA/DTG and SEM analysis. Biodegradation study was carried out by enzymatic hydrolysis. The number of carboxylic acid groups incorporated into the polymer was calculated by measuring neutralization equivalent (N.E) of the graft copolymer titrimetrically. The synthesized graft copolymer was used as the adsorbent for the removal of Malachite green, a cationic dye from its aqueous solution. The operating variables studied were the amount of adsorbent, solution pH, contact time, temperature and the initial dye concentration. The adsorption data were used to fit in the pseudo-first order and pseudo-second order rate equation in order to investigate the sorption mechanism. Equilibrium isotherm was analyzed using the Langmuir and the Freundlich isotherms. In the present investigation it was found that the adsorption kinetics followed a pseudo second order kinetics for the studied dye concentration range. The negative value of free energy change indicates the spontaneous nature of the adsorption and also suggesting a chemisorption process.     

Synthesis,Characterization and Stability of Triblock Copolymer Based on Tetrahydrofuran and Glycidylazide as Binder

In this work, a triblock copolymer polytetrahydrofuran–block-poly(glycidyl azide)–block-polytetrahydrofuran was synthesized through ring-opening polymerization of epichlorohydrin and tetrahydrofuran catalyzed by BF₃-diethyl ether at 30°C, and further modification. The structure of the polymer was verified by IR, ¹H and ¹³C NMR spectroscopy. The decomposition and kinetic parameters of the block copolymer such as its activation energy and frequency factor were determined using the differential scanning calorimetry and thermo-gravimetric analysis. The results revealed that the main thermal degradation for the copolymer occurs in the temperature range of 220–250°C. Finally, the effect of polytetrahydrofuran content on the thermal stability and decomposition temperature of the overall copolymer was investigated.     

Highly-substituted benzhydrylamine resin: An alternative chromatographic support for ganglioside and neutral glycosphingolipid purification

Summary Benzhydrylamine resin (BHAR) is a copolymer of (styrene-1% divinylbenzene) containing phenylmethylamine groups and commonly used as a solid support for peptide synthesis in organic solvents. We have demonstrated that a larger number of NH₃ ⁺ groups distributed throughout the BHAR matrix improves bead solvation under more polar conditions. As this characteristic might allow this aminated-polymer to be used as a stationary phase for liquid chromatography, a hyghly substituted BHAR (2.4 mmol.g⁻¹ of amine groups) was synthesized under forceful conditions. Neutral glycosphingolipids and negatively charged gangliosides and sulfatide obtained from rat brain extracts were successfully purified and fractionated in this BHAR batch by single-step, reverse-phase anion-exchange chromatography. Additionally, the anion-exchange potential of BHAR was also compared to that of commercial dimethylaminoethyl (DEAE)-Sephadex A25 resin.     

Homopolymer and copolymers of 4-nitro-3-methylphenyl methacrylate with glycidyl methacrylate: Synthesis, characterization, monomer reactivity ratios and thermal properties

The novel methacrylic monomer, 4-nitro-3-methylphenyl methacrylate (NMPM) was synthesized by reacting 4-nitro-3-methylphenol dissolved in ethyl methyl ketone (EMK) with methacryloyl chloride in the presence of triethylamine as a catalyst. The homopolymer and copolymers of NMPM with glycidyl methacrylate having different compositions were synthesized by free radical polymerization in EMK solution at 70 ± 1 °C using benzoyl peroxide as free radical initiator. The homopolymer and the copolymers were characterized by FT-IR, ¹H NMR and ¹³C NMR spectroscopic techniques. The solubility tests were tested in various polar and non-polar solvents. The molecular weight and polydispersity indices of the copolymers were determined using gel permeation chromatography. The glass transition temperature of the copolymers increases with increase in NMPM content. The thermogravimetric analysis of the polymers performed in air showed that the thermal stability of the copolymer increases with NMPM content. The copolymer composition was determined using ¹H NMR spectra. The monomer reactivity ratios were determined by the application of conventional linearization methods such Fineman-Ross (r₁ = 1.862, r₂ = 0.881), Kelen-Tudos (r₁ = 1.712, r₂ = 0.893) and extended Kelen-Tudos methods (r₁ = 1.889, r₂ = 0.884).     

Preparation and characterization of novel thermal-stable vinylidene chloride–methyl acrylate–glycidyl methacrylate copolymer

A novel copolymer was synthesized by vinylidene chloride (VDC)/methyl acrylate (MA)/glycidyl methacrylate (GMA). The Fourier transform infrared (FTIR) and ¹H-nuclear magnetic resonance analyses indicated that the copolymer of VDC/MA/GMA (PVMG) was synthesized successfully. The influences of GMA on the molecular weight, melting point, and thermal stability of copolymer were investigated by gel permeation chromatograph, differential scanning calorimeter, thermogravimetric analysis–FTIR, respectively. The copolymerization eliminated the phenomenon of “double melting peaks” for poly(vinylidene chloride), and the melting point was reduced to 165°C. The GMA also enhanced the thermal stability of copolymer, which was proved by the increased decomposition temperature of copolymer. The existence of GMA caused the cross-linking of the copolymer, which contributed to the improvement of barrier performance of PVMG.     

双亲嵌段共聚物PSt-b-PAA在甲苯中的自聚集行为

以α-溴乙苯为引发剂,溴化亚铜为催化剂,2,2'-联吡啶为配体,用原子转移自由基聚合(ATRP)法合成了结构一定的嵌段共聚物聚苯乙烯-b-聚丙烯酸丁酯(PSt-b-PBA).经水解制备了双亲性嵌段共聚物聚苯乙烯-b-聚丙烯酸(PSt-b-PAA);采用单溶剂溶解法配制了PSt-b-PAA在甲苯中的反胶束溶液;以极性荧光化合物N-1-萘乙二胺盐酸盐(NEAH)为极性微区探针,用荧光光谱法并配合透射电镜观察探索了双亲嵌段共聚物PSt-b-PAA在甲苯溶液中的自聚集行为,考察了双亲性嵌段共聚物浓度、链结构及温度等因素对反胶束化行为的影响规律.结果表明,亲水链PAA短而亲油链PSt长的双亲嵌段共聚物PSt-b-PAA,用单溶剂溶解法可使其在甲苯中发生自聚集,形成以亲水段为核,疏水段为壳的星状反胶束结构;反胶束为10-20nm的球形聚集态结构;PSt-b-PAA的自聚集行为及临界胶束浓度与分子链的微结构和温度等因素相关,且随着共聚物浓度的增大,小胶束会逐渐结合形成大的纺垂状聚集体.     

Synthesis of poly(p‐phenylene)‐poly(4‐diphenylaminostyrene) bipolar block copolymers with a well‐controlled and defined polymer chain structure

A poly(p‐phenylene) (PPP)‐poly(4‐diphenylaminostyrene) (PDAS) bipolar block copolymer was synthesized for the first time. A prerequisite prepolymer, poly(1,3‐cyclohexadiene) (PCHD)‐PDAS binary block copolymer, in which the PCHD block consisted solely of 1,4‐cyclohexadiene (1,4‐CHD) units, was synthesized by living anionic block copolymerization of 1,3‐cyclohexadiene and 4‐diphenylaminostyrene. To obtain the PPP‐PDAS bipolar block copolymer, the dehydrogenation of this prepolymer with quinones was examined, and tetrachloro‐1,2‐(o)‐benzoquinone was found to be an appropriate dehydrogenation reagent. This dehydrogenation reaction was remarkably accelerated by ultrasonic irradiation, effectively yielding the target PPP‐PDAS bipolar block copolymer. The hole and electron drift mobilities for PPP‐PDAS bipolar block copolymer were both on the order of 10^?3 to 10^?4 cm²/V·s, with a negative slope when plotted against the square root of the applied field. Therefore, this bipolar block copolymer was found to act as a bipolar semi‐conducting copolymer. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

从乙烯与丙烯酸二茂铁甲酰氧基乙酯共聚物制备碳纳米材料

使用乙烯和丙烯酸二茂铁甲酰氧基乙酯(FcEA)为单体,合成了乙烯与丙烯酸二茂铁基乙酯共聚物[P(E-co-FcEA)].以P(E-co-FcEA)作为前驱体,通过改变裂解条件,自催化制得系列碳纳米材料.     

Synthesis and characterization of a poly[2,7-(9,9-dioctylfluorene-alt-2,7-fluorene/β-CD)] main chain polyrotaxane

Poly[2,7-(9,9-dioctylfluorene-alt-2,7-fluorene/β-CD)] main chain polyrotaxane was synthesized through organometallic Suzuki coupling by reacting β-cyclodextrin/2,7-dibromofluorene inclusion complex with 9,9-dioctylfluorene-2,7-bis(trimethyleneborate). The IR, NMR and elemental analysis data support the presence of β-cyclodextrin in the copolymer structure. No glass transition or melting phenomena were detected in DSC curves of the polyrotaxane on the heating run in the 50-250 ° range. As compared with the reference copolymer obtained in the absence of β-cyclodextrin, the rotaxane copolymer is more hygroscopic and soluble in polar/non-polar solvent mixtures. The expected modification of the optical properties of the fluorene copolymer with rotaxane architecture in the main chain was proved by fluorescence and UV-vis spectroscopy and consists in a blue-shifted emission.