Synthesis and supramolecular self‐assembly of thermosensitive amphiphilic star copolymers based on a hyperbranched polyether core

A novel amphiphilic thermosensitive star copolymer with a hydrophobic hyperbranched poly (3‐ethyl‐3‐(hydroxymethyl)oxetane) (HBPO) core and many hydrophilic poly(2‐(dimethylamino) ethyl methacrylate) (PDMAEMA) arms was synthesized and used as the precursor for the aqueous solution self‐assembly. All the copolymers directly aggregated into core–shell unimolecular micelles (around 10 nm) and size‐controllable large multimolecular micelles (around 100 nm) in water at room temperature, according to pyrene probe fluorescence spectrometry and ¹H NMR, TEM, and DLS measurements. The star copolymers also underwent sharp, thermosensitive phase transitions at a lower critical solution temperature (LCST), which were proved to be originated from the secondary aggregation of the large micelles driven by increasing hydrophobic interaction due to the dehydration of PDMAEMA shells on heating. A quantitative variable temperature NMR analysis method was designed by using potassium hydrogen phthalate as an external standard and displayed great potential to evaluate the LCST transition at the molecular level. The drug loading and temperature‐dependent release properties of HBPO‐star‐PDMAEMA micelles were also investigated by using indomethacin as a model drug. The indomethacin‐loaded micelles displayed a rapid drug release at a temperature around LCST. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 668–681, 2008     

Synthesis of thermo‐responsive 4‐arm star‐shaped porphyrin‐centered poly(N,N‐diethylacrylamide) via reversible addition‐fragmentation chain transfer radical polymerization

Tetrafunctional porphyrins‐containing trithiocarbonate groups were synthesized by an ordinary esterification method. This tetrafunctional porphyrin (TPP‐CTA) could be used as a chain transfer agent in a controlled reversible addition‐fragmentation chain transfer (RAFT) radical polymerization to prepare well‐defined 4‐arm star‐shaped polymers. N,N‐Diethylacrylamide was polymerized using TPP‐CTA in 1,4‐dioxane. Poly(N,N‐diethylacrylamide) (PDEA) is known to be a thermo‐responsive polymer, and exhibits a lower critical solution temperature (LCST) in water. The star‐shaped PDEA polymer (TPP‐PDEA) was therefore also thermo‐responsive, as expected. The LCST of this polymer depended on its concentration in water, as confirmed by turbidity, dynamic light scattering (DLS), static light scattering (SLS), and ¹H NMR measurements. The porphyrin cores were compartmentalized in PDEA shells in aqueous media. Below the LCST, the fluorescence intensity of TPP‐PDEA was about six times larger than that of a water‐soluble low molecular weight porphyrin compound (TSPP), whose fluorescence intensity was independent of temperature. Above the LCST, the fluorescence intensity of TPP‐PDEA decreased, while the intensity was about three times higher than that of TSPP. These observations suggested that interpolymer aggregation occurred due to the hydrophobic interactions of the dehydrated PDEA arm chains above the LCST, with self‐quenching of the porphyrin moieties arising from these interactions. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

Influence of the polymer structure over self‐assembly and thermo‐responsive properties: The case of PEG‐b‐PCL grafted copolymers via a combination of RAFT and ROP

During the last years, the field of drug delivery has experienced a growing interest toward the so‐called thermo‐responsive polymers: synthetic materials that, due to the specific hydrophilic–lipophilic balance of their repeating units, exhibit a lower critical solution temperature (LCST) in water associated to a characteristic coil–globule transition. In this work, thermo‐responsive amphiphilic block copolymers are synthesized via reversible addition‐fragmentation transfer (RAFT) polymerization starting from thermo‐responsive monomers and a hydrophobic biodegradable macromonomer, oligo(caprolactone)methacrylate (CL₃MA), produced via ring opening polymerization (ROP). The obtained copolymers exhibit an interesting self‐assembly behavior leading to nanoparticles (NPs) as long as temperature is kept below the LCST. Otherwise, once this value is overcome, the destabilization of the NPs causes the formation of hydrophobic superstructures that enhance the release of an entrapped lipophilic drug. This characteristic behavior has been systematically studied and related to the copolymer structure. In particular, the self‐assembly behavior as well as temperature‐triggered NP destabilization have been related to the relative length of the two blocks constituting the copolymers and to their hydrophilic–lipophilic balance (HLB). Finally, the efficacy of the thermo‐responsive triggered drug release has been tested in the case of Paclitaxel (PTX). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2919–2931     

The Effect of Number of Arms on the Aggregation Behavior of Thermoresponsive Poly(N-isopropylacrylamide) Star Polymers

The thermoresponsive nature of aqueous solutions of poly(N-isopropylacrylamide) (PNIPAAM) star polymers containing 2, 3, 4, and 6 arms has been investigated by turbidity, dynamic light scattering, rheology, and rheo-SALS. Simulations of the thermosensitive nature of the single star polymers have also been conducted. Some of the samples form aggregates even at temperatures significantly below the lower critical solution temperature (LCST) of PNIPAAM. Increasing concentration and number of arms promotes associations at low temperatures. When the temperature is raised, there is a competition between size increase due to enhanced aggregation and a size reduction caused by contraction. Monte Carlo simulations show that the single stars contract with increasing temperature, and that this contraction is more pronounced when the number of arms is increased. Some samples exhibit a minimum in the turbidity data after the initial increase at the cloud point. The combined rheology and rheo-SALS data suggest that this is due to a fragmentation of the aggregates followed by re-aggregation at even higher temperatures. Although the 6-arm star polymer aggregates more than the other stars at low temperatures, the more compact structure renders it less prone to aggregation at temperatures above the cloud point.     

Photochemical modification of the lower critical solution temperature of cinnamoylated poly(N‐2‐hydroxypropylmethacrylamide) in water

Partial modification of the nonionic polymer poly(N‐2‐hydroxy‐propylmethacrylamide) by cinnamate produces stimuli‐responsive copolymers. The hydrophobic character of the cinnamate chromophore induces not only a lower critical solution temperature (LCST) in water, but renders additionally the polymers photoresponsive. For moderate cinnamate contents of 9 mol‐%, the photoisomerization of the trans‐cinnamate to cis‐cinnamate groups allows to switch the LCST by irradiation, whereas for higher cinnamate contents of 21 mol‐%, irradiation leads to intra‐ and intermolecular photocrosslinking.     

多重响应性超支化星形聚合物的合成与组装以及控制释放研究

含二硫键的自引发单体与2-(2-甲氧基乙氧基)乙基甲基丙烯酸酯(MEO₂MA)进行自缩合乙烯基共聚合得到超支化PMEO₂MA(H-PMEO₂MA). 以它作大分子引发剂, 引发二甲氨基乙基甲基丙烯酸酯(DMAEMA)进行原子转移自由基聚合, 合成了具有温度、pH以及氧化还原多重响应性的超支化星形聚合物H-PMEO₂MA-star-PDMAEMA. 证明了H-PMEO₂MA有低临界溶液温度(LCST); 研究了PDMAEMA 链段的长度和溶液的pH值对超支化星形聚合物的LCST的影响. 当H-PMEO₂MA-star-PDMAEMA水溶液温度从2 ℃升高至室温, H-PMEO₂MA变成疏水性而发生聚集, 形成以H-PMEO₂MA为核, PDMAEMA为壳的胶束. 在胶束形成过程中, 将尼罗红装载到这种聚合物胶束中, 形成释药系统, 研究了pH、氧化还原响应性释药性能.     

Thermosensitive and redox-active polymers: Preparation and properties of poly(N-ethylacrylamide-co-vinylferrocene) and poly(N,N-diethylacrylamide-co-vinylferrocene)

Thermosensitive and redox-active polymers were prepared by copolymerization of N-ethyl- or N,N-diethylacrylamides with vinylferrocene (VFc). LCST (lower critical solution temperature) of the aqueous copolymer solution was decreased by increasing the ferrocene content in the copolymer. The oxidation of ferrocene led to a significant increase in LCST due to the transition from hydrophobic to hydrophilic character of the ferrocene moiety in the copolymer. The ferrocene content in the copolymer increases with increasing differences between the LCST's of the oxidation and reduction states. The transition could be made reversible by redox reaction using L -ascorbic acid as an oxidant and cerium sulfate as a reductant. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1967–1972, 1997     

Study of the phase transition of poly(N,N‐diethylacrylamide) in water by rheology and dynamic light scattering

Poly(N,N‐diethylacrylamide) (PDEA) possesses a lower critical solution temperature (LCST) in aqueous media. The solution properties of PDEA at various temperatures have been characterized with techniques such as rheology and dynamic light scattering. There is a decrease in the coil size before the phase transition due to a coil‐to‐globule transition. At the LCST, rheological and dynamic light scattering studies have also confirmed an aggregation phenomenon. This aggregation modifies the rheological properties of the polymer solutions. High frequencies hinder the phase‐transition process and reduce the LCST of the polymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1627–1637, 2003     

Thermoregulated phase‐transfer catalysis via PEG‐armed Ru(II)‐bearing microgel core star polymers: Efficient and reusable Ru(II) catalysts for aqueous transfer hydrogenation of ketones

Thermoregulated phase‐transfer catalysis for the transfer hydrogenation of 2‐octanone in 2‐propanol/H₂O biphasic media was achieved with ruthenium‐bearing microgel‐core star polymers with amphiphilic, thermosensitive poly(ethylene glycol) (PEG) arms [Ru(II)‐PEG star], which were directly prepared by the ruthenium‐catalyzed living radical polymerization in conjunction with a phosphine ligand‐carrying styrene derivative. The star polymers were first placed in the aqueous (lower) layer at room temperature and immediately moved into the organic (upper) layer at 100 °C, and once again, moved down to the aqueous layer (lower) upon cooling the solution to room temperature. The Ru(II)‐PEG star catalyst was clearly superior to the original Ru(II) catalyst and related non‐microgel catalysts [Ru(II)‐PEG block] in terms of activity and recovery/recycle, due to the unique designer structure of the microgel‐core star polymers. Other substrates (less hydrophobic alkyl ketones and aromatic ketone) were also efficiently hydrogenated into the corresponding sec‐alcohols with the star catalyst in aqueous media. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 373–379, 2010     

Temperature‐Directed Micellar Morphological Transformation Using CABC‐Block Copolymers and Its Applications in Encapsulation and Hidden Segment

A temperature‐directed micellar morphological transformation was developed using CABC multi‐block copolymers with a hydrophobic block A, a hydrophilic block B, and a thermally responsive block C with a lower critical solution temperature (LCST). The micellar structure was switched from a star (below LCST) to a flower (above LCST). The transition temperature was tunable in a wide range (11–90 °C) by varying the C monomer composition. The large difference in the loading capacity between the star and flower enabled efficient encapsulation and controlled release of external molecules. Unlike conventional systems, the present star‐to‐flower transformation keeps micellar structures and hence does not liberate polymers but only external molecules selectively. Another application is a hidden functional segment. A functional segment is hidden (shielded) below the LCST and exposed to interact with external molecules or surfaces above the LCST.     

Remarkably stable amphiphilic random copolymer assemblies: A structure–property relationship study

Synthesis of a library of amphiphilic random copolymers from a single reactive pre‐polymer and their self‐assembly is reported. Post‐polymerization modifications of the parent polymer containing pendant N‐hydroxy succinimide (NHS) ester groups with various oligooxyethylene (OE) amines produce amphiphilic random copolymers with same degree of polymerization and equal extent of randomness. ¹H‐NMR and FT‐IR data indicate quantitative substitution in all cases. The critical aggregation concentration (CAC) for all the polymers is estimated to be in the range of 10^?5 M. Stability of these nano‐aggregates is studied by photoluminescence using time dependent F—rster Resonance Energy Transfer (FRET) between co‐encapsulated lipophilic dyes namely DiO and DiI in the hydrophobic pocket of the aggregates. These studies suggest remarkably high stability for all systems. However those with shorter hydrophilic pendant chains are found to be even more robust. Morphology is examined by high resolution transmission electron microscopy (HRTEM) which reveals multi‐micellar clusters and vesicles for polymers containing short and longer OE segments, respectively. Encapsulation efficacy is tested with both hydrophobic and hydrophilic guest molecules. All of them can encapsulate hydrophobic guest pyrene while a hydrophilic dye Calcein can be sequestered only in vesicle forming polymers. Lower critical solution temperature (LCST) is exhibited by only one polymer that contains the shortest OE chains. All polymers exhibit excellent cell viability as determined by MTT assay. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4932–4943     

Synthesis and characterization of multiarm star-branched polyisobutylenes: Effect of arm molecular weight

A series of star-branched polyisobutylenes with varying arm molecular weights was synthesized using the 2-chloro-2,4,4-trimethylpentane/TiCl₄/pyridine initiating system and divinylbenzene (DVB) as a core-forming comonomer (linking agent). The resulting star-branched polymers were characterized with regard to the weight-average number of arms per star molecule (N̄_w) and dilute solution viscosity behavior. As the molecular weight of the arm (M̄_{w, arm}) was increased, dramatically longer star-forming reaction times were needed to produce fully developed star polymers. It was calculated that N̄_w varied from 50 to 5 as the M̄_{w, arm} was increased from 13,000 to 54,000 g/mol. The radius of gyration, R_g, of the star polymers was observed to increase as M̄_{w, arm} was increased. The solution properties of the star polymers were evaluated in heptane using dilute solution viscometry. It was determined that the stars had a much higher [η] compared to the respective linear PIB arms, but a much lower [η] compared to a hypothetical linear analog of an equivalent molecular weight. The dependence of [η] on temperature for the stars and linear arms was very small over the temperature range 25 to 75°C, with only a very slight decrease with increasing temperature. [η]_star was also determined to increase with increasing M̄_{w, arm}, but decrease with increasing M̄_{w, star}. The branching coefficient, g′, calculated for the stars at 25°C, increased as N̄_w decreased and agre ed well with literature values for other star polymer systems. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3767–3778, 1997     

A New Approach for the Synthesis of Miktoarm Star Polymers Through a Combination of Thiol–Epoxy “Click” Chemistry and ATRP/Ring‐Opening Polymerization Techniques

A new approach was developed for synthesis of certain A₃B₃‐type of double hydrophilic or amphiphilic miktoarm star polymers using a combination of “grafting onto” and “grafting from” methods. To achieve the synthesis of desired miktoarm star polymers, acetyl protected poly(ethylene glycol) (PEG) thiols (M_n = 550 and 2000 g mol^?1) were utilized to generate A₃‐type of homoarm star polymers through an in situ protective group removal and a subsequent thiol–epoxy “click” reaction with a tris‐epoxide core viz. 1,1,1‐tris(4‐hydroxyphenyl)ethane triglycidyl ether. The secondary hydroxyl groups generated adjacent to the core upon the thiol–epoxy reaction were esterified with α‐bromoisobutyryl bromide to install atom transfer radical polymerization (ATRP) initiating sites. ATRP of N‐isopropylacrylamide (NIPAM) using the three‐arm star PEG polymer fitted with ATRP initiating sites adjacent to the core afforded A₃B₃‐type of double hydrophilic (PEG)₃[poly(N‐isopropylacrylamide)] (PNIPAM)₃ miktoarm star polymers. Furthermore, the generated hydroxyl groups were directly used as initiator for ring‐opening polymerization of ε‐caprolactone to prepare A₃B₃‐type of amphiphilic (PEG)₃[poly(ε‐caprolactone)]₃ miktoarm star polymers. The double hydrophilic (PEG)₃(PNIPAM)₃ miktoarm star polymers showed lower critical solution temperature around 34 °C. The preliminary transmission electron microscopy analysis indicated formation of self‐assembly of (PEG)₃(PNIPAM)₃ miktoarm star polymer in aqueous solution. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 146–156     

Diblock copolymers based on allyl methacrylate: Synthesis,characterization, and chemical modification

Different diblock copolymers constituted by one segment of a monomer supporting a reactive functional group, like allyl methacrylate (AMA), were synthesized by atom transfer radical polymerization (ATRP). Bromo‐terminated polymers, like polystyrene (PS), poly(methyl methacrylate) (PMMA), and poly(butyl acrylate) (PBA) were employed as macroinitiators to form the other blocks. Copolymerizations were carried out using copper chloride with N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) as the catalyst system in benzonitrile solution at 70 °C. At the early stage, the ATRP copolymerizations yielded well‐defined linear block copolymers. However, with the polymerization progress a change in the macromolecular architecture takes place due to the secondary reactions caused by the allylic groups, passing to a branched and/or star‐shaped structure until finally yielding gel at monomer conversion around 40% or higher. The block copolymers were characterized by means of size exclusion chromatography (SEC), ¹H NMR spectroscopy, and differential scanning calorimetry (DSC). In addition, one of these copolymers, specifically P(BA‐b‐AMA), was satisfactorily modified through osmylation reaction to obtain the subsequent amphiphilic diblock copolymer of P(BA‐b‐DHPMA), where DHPMA is 2,3‐dihydroxypropyl methacrylate; demonstrating the feasibility of side‐chain modification of the functional obtained copolymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3538–3549, 2007     

Temperature-Directed Micellar Morphological Transformation Using CABC-Block Copolymers and Its Applications in Encapsulation and Hidden Segment

A temperature-directed micellar morphological transformation was developed using CABC multi-block copolymers with a hydrophobic block A, a hydrophilic block B, and a thermally responsive block C with a lower critical solution temperature (LCST). The micellar structure was switched from a star (below LCST) to a flower (above LCST). The transition temperature was tunable in a wide range (11–90 °C) by varying the C monomer composition. The large difference in the loading capacity between the star and flower enabled efficient encapsulation and controlled release of external molecules. Unlike conventional systems, the present star-to-flower transformation keeps micellar structures and hence does not liberate polymers but only external molecules selectively. Another application is a hidden functional segment. A functional segment is hidden (shielded) below the LCST and exposed to interact with external molecules or surfaces above the LCST.     

Temperature-responsive phase transition of polymer vesicles: real-time morphology observation and molecular mechanism

Novel thermosensitive polymer vesicles with controlled temperature-responsive phase transition at the lower critical solution temperature (LCST) varying from 8 to 81 degrees C were prepared via self-assembly of amphiphilic hyperbranched star copolymers having a hydrophobic hyperbranched poly[3-ethyl-3-(hydroxymethyl)oxetane] (HBPO) core and many hydrophilic polyethylene oxide (PEO) arms. Real-time optical microscopic observation revealed that the polymer vesicles have undergone sequential morphology changes including enrichment, aggregation, fusion, and vesicle-to-membrane transformation near the LCST. Molecular-level investigation indicates that the LCST transition results from the decreasing water solubility of the polymer vesicles with increasing temperature based on the partial dehydration of the PEO vesicle corona. On the basis of these results, a LCST transition mechanism, in view of the molecular configuration, balance of hydrophilic and hydrophobic moieties, and the vesicle morphology transformations, was proposed. As far as we know, the work presented here is the first demonstration of thermosensitive vesicles based on PEO, and the finding may be useful to design the thermosensitive core-shell structures by introducing the PEO segments.     

Synthesis of poly(styrene‐block‐tert‐butyl acrylate) star polymers by atom transfer radical polymerization and micellization of their hydrolyzed polymers

A series of poly(styrene‐block‐tert‐butyl acrylate) heteroatom star block copolymers having various block lengths were prepared by atom transfer radical polymerization (ATRP), using an “as synthesized” cynurate modified trifunctional initiator. The structure of the star polymers was confirmed by the characterization of the individual arms resulting from hydrolysis. Amphiphilic poly(styrene‐block‐acrylic acid) star copolymers were further synthesized by hydrolyzing PtBA blocks using anhydrous trifluoroacetic acid. The characterization data are reported from analyses using gel permeation chromatography, infrared, ¹H and ¹³C NMR spectroscopies. The stable micelle solution was prepared by dialyzing the solution of these polymers in N,N‐dimethylformamide against deionized water. The temperature‐induced associating behavior of these amphiphilic star polymers were studied using dynamic laser light scattering spectroscopy. The hydrodynamic diameter of both micelles and unassociated chains were obtained in the same solution using light scattering cumulant's calculation method. The homogeneity and the size distribution of the micelle population in the solution were determined using centrifuge/sedimentation particle size distribution analyzer. Field emission scanning electron microscope was used to visualize the size of the micelles formed and the micellar aggregates. The influence of the temperature on the viscosity of the micelle solution was studied using an Ubbelohde viscometer. Thermodynamics of micellization of these block copolymers were also investigated. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6367–6378, 2005     

Tunable thermoresponsive β-cyclodextrin-based star polymers

Thermoresponsive star polymers were synthesized by copolymerization of water-soluble acrylate monomers, di(ethylene glycol) ethyl ether acrylate (DEGA) and 2-hydroxyethyl acrylate (HEA), in a core-first approach using a modified β-cyclodextrin multifunctional initiator and photo-mediated atom transfer radical polymerization (photoATRP). The controlled character of the polymerization, as well as the formation of statistical star copolymers, was demonstrated. The lower critical solution temperature (LCST) is conveniently tuned by varying the ratio of the two hydrophilic monomers. The cyclodextrin core appears to lead to a lowering of the LCST, and introduction of a hydrophobic pocket via star block copolymer synthesis allowed for further tunability of the cloud point temperature. In the final step, we demonstrate that the star polymers made in here can be used as facile carriers and solubilizers for hydrophobic compounds, highlighting their applicability in the biomedical field.     

Doubly photoresponsive and water‐soluble block copolymers: Synthesis and thermosensitivity

We report the synthesis and investigation of a new type of photoresponsive block copolymers (BCPs). They were designed to comprise two water‐soluble polymers containing two different photoisomerizable moieties (either azobenzene and spiropyran or two different azobenzenes), with the two constituting blocks that, when separated, exhibit a lower critical solution temperature (LCST) in water and can shift their LCST in opposite directions upon photoisomerization (decrease of LCST for one polymer and increase for the other). A variety of such doubly photoresponsive BCPs were synthesized using either azobenzene‐ or spiropyran‐containing poly(N,N‐dimethylacrylamide) (PDMA), poly(N‐isopropylacrylamide) (PNIPAM) and poly[methoxydi(ethylene glycol) methacrylate] (PDEGMMA). Their thermal phase transition behaviors in aqueous solution before and after simultaneous photoreactions on the two blocks were investigated in comparison with their constituting blocks, by means of solution transmittance (turbidity) and variable‐temperature ¹H NMR measurements. The results show that BCPs displayed a single LCST whose shift upon two photoisomerizations appeared to be determined by the competing and opposing photoinduced effects on the two blocks. Moreover, optically controlling the relative photoisomerization degrees of trans azobenzene‐to‐cis azobenzene and spiropyran‐to‐merocyanine could be used to tune the LCST of BCP solution. This study demonstrates the potential of exploring a more complex photoreaction scheme to optically control the solution properties of water‐soluble thermosensitive BCPs. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4055–4066, 2010     

Synthesis and characterization of temperature‐sensitive block‐graft PNiPAAm‐b‐(PαN3CL‐g‐alkyne) copolymers by ring‐opening polymerization and click reaction

This study synthesized thermo‐sensitive amphiphilic block‐graft PNiPAAm‐b‐(PαN₃CL‐g‐alkyne) copolymers through ring‐opening polymerization of α‐chloro‐ε‐caprolactone (αClCL) with hydroxyl‐terminated macroinitiator poly(N‐isopropylacrylamide) (PNiPAAm), substituting pendent chlorides with sodium azide. This was then used to graft various kinds of terminal alkynes moieties by means of the copper‐catalyzed Huisgen's 1,3‐dipolar cycloaddition (“click” reaction). ¹H NMR, FTIR, and gel permeation chromatography (GPC) was used to characterize these copolymers. The solubility of the block‐graft copolymers in aqueous media was investigated using turbidity measurement, revealing a lower critical solution temperature (LCST) in the polymers. These solutions showed reversible changes in optical properties: transparent below the LCST, and opaque above the LCST. The LCST values were dependant on the composition of the polymer. With critical micelle concentrations (CMCs) in the range of 2.04–9.77 mg L^?1, the block copolymers formed micelles in the aqueous phase, owing to their amphiphilic characteristics. An increase in the length of hydrophobic segments or a decrease in the length of hydrophilic segments amphiphilic block‐graft copolymers produced lower CMC values. The research verified the core‐shell structure of micelles by ¹H NMR analyses in D₂O. Transmission electron microscopy was used to analyze the morphology of the micelles, revealing a spherical structure. The average size of the micelles was in the range of 75–145 nm (blank), and 105–190 nm (with drug). High drug entrapment efficiency and drug loading content were observed in the drug micelles. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011