PLMA‐b‐POEGMA amphiphilic block copolymers: Synthesis and self‐assembly in aqueous media

The synthesis and self‐assembly properties in aqueous solutions of novel amphiphilic block copolymers composed of one hydrophobic poly (lauryl methacrylate), (PLMA) block and one hydrophilic poly (oligo ethylene glycol methacrylate) (POEGMA) block are reported. The block copolymers were prepared by RAFT polymerization and were molecularly characterized by size exclusion chromatography, NMR and FT‐IR spectroscopy, and DSC. The PLMA‐b‐POEGMA amphiphilic block copolymers self‐assemble in nanosized complex nanostructures resembling compound micelles when inserted in aqueous media, as supported by light scattering and TEM measurements. The encapsulation and release of the model, hydrophobic, nonsteroidal anti‐inflammatory drug indomethacin in the polymeric micelles is also investigated. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 155–163     

Crystallization induced micellization of poly（p-dioxanone）-block-polyethylene glycol diblock copolymer functionalized with pyrene moiety

Poly（p-dioxanone）-block-polyethylene glycol diblock copolymers functionalized with pyrene moieties（Py-PPDO-b-PEG） at the chain ends of PPDO blocks were synthesized for preparing anisotropic micelles with improved stability.The micellization and crystallization of the copolymers were investigated by nano differential scanning calorimetry（Nano DSC）,transmission electron microscopy（TEM）,UV-vis spectrophotometery,fluorophotometer,and dynamic light scattering（DLS）,respectively.The results indicated that the aggregation of pyrene induced by intermolecular interaction lead to micellization of Py-PPDO-b-PEG at much lower concentrations than those of PPDO-b-PEG copolymers without pyrene moieties.The aggregation of pyrene moieties may also serve as nucleation agent and therefore enhance the crystallization rate of PPDO blocks.Fluorescence measurements by using Nile Red as the fluorescent agent indicated that the micelles of Py-PPDO-b-PEG have high stability and load capacity for hydrophobic molecules.     

三嵌段共聚物和两嵌段共聚物在水溶液中共混自组装成多室胶束结构的耗散粒子动力学模拟(英文)

利用耗散粒子动力学模拟研究了在水溶液中混合不同的线形三嵌段共聚物AxByCz和线形两嵌段共聚物AmBn对多室胶束的形貌多样性的影响.通过改变线形的三嵌段共聚物和两嵌段共聚物的链长来寻找多室胶束的形成条件.由线形三嵌段共聚物和线形两嵌段共聚物的不同混合形成的多室胶束结构是多种多样的,例如"蠕虫状"胶束、"汉堡包"胶束、"球上球"胶束、"核-壳-壳"胶束等等.多室胶束的整体形貌和内部结构的控制都可以从线形三嵌段共聚物和两嵌段共聚物的二元共混得到.为了表征获得的多室胶束结构,我们计算了密度图和成对分布函数图.在此工作中,可以获得和观察到复杂的多室胶束.结果表明,简单地混合线形的三嵌段共聚物和线形的两嵌段共聚物是一个控制多室胶束形貌和结构的有效方法,在工程实验中可以更简单更经济地形成多室胶束结构.因此,在设计新的多室胶束方面,聚合物共混仍然是未来值得更加关注的一个话题.     

UV‐induced crosslinking of ring opening metathesis block copolymer micelles

Statistical and amphiphilic block copolymers bearing cinnamoyl groups were prepared by ring opening metathesis polymerization (ROMP). The UV‐induced [2 + 2] cycloaddition reaction of polymer bound cinnamic acid groups was studied in polymer thin films as well as in block copolymer micelles. In both cases, exposure to UV‐light for 10 min led to a crosslinking conversion of about 60%, as determined by FT‐IR spectroscopy and UV–vis absorption measurements. Time based IR‐spectroscopy revealed a maximum conversion of 78% reached after an irradiation time of about 16 min. For micelles obtained from polymers bearing 5 mol % or more cinnamoyl groups, the crosslinking reaction proceeded smoothly, yielding in crosslinked particles which were stable in a non‐selective solvent (CHCl₃). Diameters determined by dynamic light scattering in the selective solvent (MeOH) were similar for both, non‐crosslinked and crosslinked micelles, whereas diameters of crosslinked micelles in the non‐selective solvent (CHCl₃) were significantly larger compared to MeOH samples. This strategy of direct self assembly of block‐copolymers in a selective solvent followed by “clean” crosslinking, without the need for additional crosslinking reagents or crosslinking initiators, provides a straight forward approach toward ROMP‐based polymeric nano‐particles. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2402–2413, 2008     

环境响应性嵌段共聚物的合成、自组装及应用研究进展

近年来具有环境响应性的嵌段共聚物的研发受到了人们的广泛关注。该类型共聚物可以对外界环境刺激产生相应的结构、物理及化学性能的变化。根据外界环境刺激响应机理及类型的不同,可将其分为单一因素、双重因素以及三重因素刺激响应性嵌段共聚物三大类。针对每一类体系,本文重点综述了嵌段共聚物的设计合成、自组装以及应用等研究现状,并概括总结了各种有序聚集体(如胶束、囊泡等)随外界环境刺激(如pH、温度、光、CO_2、氧化还原剂等)所作出的响应性变化。最后,对智能型嵌段共聚物在药物控释、纳米容器制备、生物功能材料等方面潜在的应用价值和今后可能的发展方向进行了展望。     

Aggregate morphologies of amphiphilic ABC triblock copolymer in dilute solution using self-consistent field theory

The complex microstructures of amphiphilic ABC linear triblock copolymers in which one of the end blocks is relatively short and hydrophilic, and the other two blocks B and C are hydrophobic in a dilute solution, have been investigated by the real-space implementation of self-consistent field theory (SCFT) in two dimensions (2D). In contrast to diblock copolymers in solution, the aggregation of triblock copolymers are more complicated due to the presence of the second hydrophobic blocks and, hence, big ranges of parameter space controlling the morphology. By tailoring the hydrophobic degree and its difference between the blocks B and C, the various shapes of vesicles, circlelike and linelike micelles possibly corresponding to spherelike, and rodlike micelles in 3D, and especially, peanutlike micelles not found in diblock copolymers are observed. The transition from vesicles to circlelike micelles occurs with increasing the hydrophobicity of the blocks B and C, while the transition from circlelike micelles to linelike micelles or from the mixture of micelles and vesicles to the long linelike micelles takes place when the repulsive interaction of the end hydrophobic block C is stronger than that of the middle hydrophobic block B. Furthermore, it is favorable for dispersion of the block copolymer in the solvent into aggregates when the repulsion of the solvent to the end hydrophobic block is larger than that of the solvent to the middle hydrophobic block. Especially when the bulk block copolymers are in a weak segregation regime, the competition between the microphase separation and macrophase separation exists and the large compound micelle-like aggregates are found due to the macrophase separation with increasing the hydrophobic degree of blocks B and C, which is absent in diblock copolymer solution. The simulation results successfully reproduce the existing experimental ones.     

Formation and flocculation of graft copolymer micelles

Criteria for formation and flocculation of micelles from pure graft copolymers were investigated in single selective solvents by turbidimetry with the use of two series of graft copolymers from poly(vinyl acetate) (PVAC), i.e., PVAC–styrene graft copolymers with one branch and PVAC–methyl methacrylate graft copolymers with one and several branches. These graft copolymers could be completely coagulated through two processes in the selective solvents which had widely different ? temperatures. The first process is the formation of micelles. One sequence, i.e., either backbone or branch of the graft copolymers, becomes desolvated under conditions similar to those for the corresponding homopolymer. This results in formation of the core of the micelle, the other soluble sequence extending from the surface of the core into the solvent phase. As the soluble chains cover the micelle core, no macroscopic phase separation occurs, but a stable dispersion is formed. The second process is that the micelle becomes too unstable to exist as dispersed when the solvency of the medium for the soluble sequence decreases to a certain degree. As a result, flocculation of the micelle finally takes place.     

Amphiphilic diblock copolymers bearing pendant aromatic acetal groups: Synthesis and tunable pH‐triggered assembly/disassembly transition behavior

A novel aromatic acetal‐based acid‐labile monomer 2‐phenyl‐5‐ethyl‐5‐acryloxymethyl‐1,3‐dioxacyclohexane (HEDPA) was synthesized and polymerized by reversible addition fragmentation chain transfer (RAFT) polymerization using alkynyl functional chain transfer agent (CTA‐Alk). Afterward, a series of amphiphilic diblock copolymers composed of fixed hydrophobic poly(2‐phenyl‐5‐ethyl‐5‐acryloxymethyl‐1,3‐dioxacyclohexane) (PDAEP) segments and various lengths of hydrophilic mPEG segments were prepared through click reaction between alkynyl‐terminated PDAEP and azido‐terminated mPEG. The self‐assembly behaviors of the diblock copolymers were investigated by dynamic light scattering (DLS), transmission electron microscopy (TEM), fluorescence spectroscopy, and ¹H NMR. These results indicated that the diblock copolymers could self‐assemble into nano‐sized micelles with PDAEP cores and PEG coronas in aqueous solution. DLS, fluorescence spectroscopy and UV–vis spectroscopy were used to monitor the pH‐triggered assembly/disassembly transition of the micelles. These results showed that the assembly/disassembly transition behaviors of the diblock copolymers micelles can be adjusted by changing the lengths of the mPEG segments. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1537–1547     

New amphiphilic diblock copolymers: surfactant properties and solubilization in their micelles

Several series of amphiphilic diblock copolymers are investigated as macrosurfactants in comparison to reference low-molar-mass and polymeric surfactants. The various copolymers share poly(butyl acrylate) as a common hydrophobic block but are distinguished by six different hydrophilic blocks (one anionic, one cationic, and four nonionic hydrophilic blocks) with various compositions. Dynamic light scattering experiments indicate the presence of micelles over the whole concentration range from 10(-4) to 10 g x L(-1). Accordingly, the critical micellization concentrations are very low. Still, the surface tension of aqueous solutions of block copolymers decreases slowly but continuously with increasing concentration, without exhibiting a plateau. The longer the hydrophobic block, the shorter the hydrophilic block, and the less hydrophilic the monomer of the hydrophilic block is, the lower the surface tension is. However, the effects are small, and the copolymers reduce the surface tension much less than standard low-molar-mass surfactants. Also, the copolymers foam much less and even act as anti-foaming agents in classical foaming systems composed of standard surfactants. The copolymers stabilize O/W emulsions made of methyl palmitate as equally well as standard surfactants but are less efficient for O/W emulsions made of tributyrine. However, the copolymer micelles exhibit a high solubilization power for hydrophobic dyes, probably at their core-corona interface, in dependence on the initial geometry of the micelles and the composition of the block copolymers. Whereas micelles of copolymers with strongly hydrophilic blocks are stable upon solubilization, solubilization-induced micellar growth is observed for copolymers with moderately hydrophilic blocks.     

Brownian dynamics simulations on the self-assembly behavior of AB hybrid dendritic-star copolymers

The micellization behavior of hybrid dendritic-star copolymers with solvophilic dendritic units is studied by means of Brownian dynamics simulations. The critical micelle concentration and the micelle size and shape are examined for different solvophobic/solvophilic ratios r as a function of the number of the dendritic and linear arms. Hybrid dendritic-star copolymers with one dendritic and up to three solvophobic linear branches form spherical micelles with preferential aggregation number. Those with two dendritic arms and three solvophobic branches form micelles with wide aggregation numbers only for small values of r. For hybrid dendritic-star copolymers with three dendritic arms and two or three solvophobic linear arms, micelles with wide aggregation numbers are also formed but for slightly higher values of r. Our results for the aggregation number are compared with existing results of other architectures obtained at the same temperature, and an inequality for the aggregation number is proposed.     

Synthesis and properties of Pluronic-based pentablock copolymers with pendant amino groups

Amphiphilic Pluronic-based pentablock copolymers with pendant amino groups have been successfully synthesized via ring opening polymerization of γ-(carbamic acid benzyl ester)-ε-caprolactone (γCABεCL) and ε-caprolactone (εCL) using Pluronic F127 as macroinitiator and Sn(Oct)₂ as catalyst, and followed by hydrolysis of the Cbz protected groups under acidic conditions. The structure of the copolymer was confirmed by proton nuclear magnetic resonance (¹H NMR) and Fourier transform infrared spectroscopy spectra. In addition, gel permeation chromatography results demonstrated that the synthetic copolymer had a single and symmetrical peak. Moreover, the crystallinity and hydrophilicity could be well adjusted by the content of the functionalized monomer. Successful formation of aggregates was demonstrated by fluorescence method and transmission electron microscopy revealed that the micelles had a spherical morphology and the size was on nano scale according to the laser particle sizer results. The polymeric micelles had no obvious cytotoxicity even the micelles concentration reached 500 mg/L. Thus the Pluronic-b-poly(γ-amino-ε-caprolactone-co-ε-caprolactone) copolymers have great potential for the use in the biomedical fields.     

Application of solid phase peptide synthesis to engineering PEO–peptide block copolymers for drug delivery

This work describes a simple, versatile solid-phase peptide-synthesis (SPPS) method for preparing micelle-forming poly(ethylene oxide)-block-peptide block copolymers for drug delivery. To demonstrate its utility, this SPPS method was used to construct two series of micelle-forming block copolymers (one of constant core-composition and variable length; the other of constant core length and variable composition). The block copolymers were then used to study in detail the effect of size and composition on micellization. The various block copolymers were prepared by a combination of SPPS for the peptide block, followed by solution–phase conjugation of the peptide block with a proprionic acid derivative of poly(ethylene oxide) (PEO) to form the PEO-b-peptide block copolymer. The composition of each block component was characterized by mass spectrometry (MALDI and ES-MS). Block copolymer compositions were characterized by ¹H NMR. All the block copolymers were found to form micelles as judged by transmission electron microscopy (TEM) and light scattering analysis. To demonstrate their potential as drug delivery systems, micelles prepared from one member of the PEO-b-peptide block copolymer series were physically loaded with the anticancer drug doxorubicin (DOX). Micelle static and dynamic stability were found to correlate strongly with micelle core length. In contrast, these same micellization properties appear to be a complex function of core composition, and no clear trends could be identified from among the set of compositionally varying, fixed length block copolymer micelles. We conclude that SPPS can be used to construct biocompatible block copolymers with well-defined core lengths and compositions, which in turn can be used to study and to tailor the behavior of block copolymer micelles.     

Diblock copolymer micellar lithography: 1. Intermicellar interactions and pathways for control of monomicellar film structure

The formation of reverse micelles of amphiphilic diblock copolymers of styrene and 2-vinylpyridine in selective (for one of the blocks) solvent (toluene) is studied by dynamic light scattering and atomic force and transmission electron microscopies, as well as by absorption spectroscopy and X-ray photoelectron spectroscopy techniques. It is revealed that the behavior of micelles of block copolymers with different ratios of block lengths and absolute molecular masses in solution is fundamentally different depending on the amount of added metal salt. The possibility of controlled variations in the characteristic sizes of two-dimensional ordered ensembles of micelles on the surface of silicon wafers is demonstrated. It is shown that, in some cases, the distance between the centers of micelles in ensemble depends on the concentration of copolymer solution and the amount of metal salt preliminarily added to the solution.     

Drug release and biocompatibility of self‐assembled micelles prepared from poly (ɛ‐caprolactone/glycolide)‐poly (ethylene glycol) block copolymers

A series of poly(?‐caprolactone/glycolide)‐poly(ethylene glycol) (P(CL/GA)‐PEG) diblock copolymers were prepared by ring opening polymerization of a mixture of ?‐caprolactone and glycolide using mPEG as macro‐initiator and stannous octoate as catalyst. Self‐assembled micelles were prepared from the copolymers using nanoprecipitation method. The micelles were spherical in shape. The micelle size was larger for copolymers with longer PEG blocks. In contrast, the critical micelle concentration of copolymers increased with decreasing the overall hydrophobic block length. Drug loading and drug release studies were performed under in vitro conditions, using paclitaxel as a hydrophobic model drug. Higher drug loading was obtained for micelles with longer poly(ε‐caprolactone) blocks. Faster drug release was obtained for micelles of mPEG2000 initiated copolymers than those of mPEG5000 initiated ones. Higher GA content in the copolymers led to faster drug release. Moreover, drug release rate was enhanced in the presence of lipase from Pseudomonas sp., indicating that drug release is facilitated by copolymer degradation. The biocompatibility of copolymers was evaluated from hemolysis, dynamic clotting time, and plasma recalcification time tests, as well as MTT assay and agar diffusion test. Data showed that copolymer micelles present outstanding hemocompatibility and cytocompatibility, thus suggesting that P(CL/GA)‐PEG micelles are promising for prolonged release of hydrophobic drugs.     

无规共聚物自组装球形胶束表面亲水性的耗散粒子动力学模拟

建立了含不同亲疏水粒子比的双亲性无规共聚物粗粒化模型. 采用耗散粒子动力学方法模拟了两亲性无规共聚物选择性溶剂自组装球形胶束表面的亲水性能. 模拟结果表明, 无规共聚物在选择性溶剂中自组装得到实心球形胶束, 球形胶束表面的亲水性与聚合物链亲水粒子含量、溶剂的选择性有关. 随着聚合物链所含亲水粒子增加, 球形胶束表面的亲水性增强. 球形胶束表面的亲水性随着疏水粒子与溶剂粒子间的排斥参数增大而增强, 模拟结果与实验结论一致. 该模拟方法给出的胶束微结构信息可以为双亲无规共聚物分子设计及自组装双亲胶束制备提供一定的理论指导.     

Influence of a strong polyelectrolyte block on the formation and properties of polymer micelles with a mixed corona

Joint micellization of two amphiphilic diblock copolymers is studied by velocity sedimentation, transmission electron microscopy, electrophoretic mobility measurements, and static light scattering. One of the diblock copolymers is a strong polyelectrolyte (polystyrene-block-poly(N-ethyl-4-vinylpyridinium bromide)), while the second one is a weakly charged or uncharged copolymer (polystyrene-block-poly(acrylic acid) or polystyrene-block-poly(4-vinylpyridine)). It is shown that the mixing of the diblock copolymers in a selective aqueous-organic solvent (DMF-methanol-water) leads to the formation of joint (hybrid) micelles and that the composition of these micelles is close to the composition of the polymer mixture. Micelles consist of an insoluble polystyrene core and a mixed corona composed of blocks of a strong polyelectrolyte and a weakly charged or uncharged copolymer. Aqueous dispersions of mixed micelles are obtained with the use of the dialysis technique, the spherical morphology of the micelles is ascertained, and their three-layered structure is proposed. The nonlinear dependence of the molecular mass of micelles on their composition is found. The decisive effect of electrostatic repulsion between strong polyelectrolyte units on the thermodynamics of micellization and the dispersion stability and molecular-mass characteristics of the mixed micelles is demonstrated.     

黄体酮纳米胶束构建及体外释放行为

为了制备可缓释释放的黄体酮纳米胶束新剂型,构建了两嵌段聚合物载体聚乙二醇-聚丙烯基缩水甘油醚(PEG-PAGE),组装成胶束,对黄体酮担载,考察不同条件下的载药量和包封率,筛选出最佳比例,并进行体外释放研究。 结果表明,该胶束能够担载黄体酮,载药量为4.26%,包封率为21.30%,48 h内累计释放达61.31%,能够有效地延缓黄体酮的释放,为黄体酮纳米剂型的开发提供了实验和技术参考。     

Synthesis and self‐assembly in water of coil‐rod‐coil amphiphilic block copolymers with central π‐conjugated sequence

The purpose of this study is to correlate the nano‐organization in water of coil‐rod‐coil amphiphilic block copolymers constituted of a conjugated segment to their optoelectronic properties. The ABA block copolymer structures, easily achieved via coupling reactions, are based on conjugated rod of dihexylfluorene and 3,4‐ethylenedioxythiophene units linked to two flexible poly(ethylene oxide) or poly[(ethylene oxide)‐ran‐(propylene oxide)] chains. These well‐defined copolymers exhibited a range of specific morphologies in water, a good solvent of coil blocks and a bad solvent of the conjugated rod. Particularly, vesicles and micelles with spherical, cylindrical, or elongated shape were noticed. Correlations were attempted to be established between the weight percent of the conjugated sequence contained in the copolymers, the morphology of the nanostructures obtained by self‐assembly in solution and the resulting optical properties. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4602–4616, 2008     

Aggregate morphologies of amphiphilic graft copolymers in dilute solution studied by self-consistent field theory

Microstructures assembled by amphiphilic graft copolymers in a selective solvent (poor for the backbone chain and good for graft chains or poor for graft chains and good for the backbone chain) were investigated on the basis of a real-space algorithm of self-consistent field theory in two-dimensions. Circle-like micelles, line-like micelles, large compound micelles, and vesicles are obtained by tailoring the architectural parameters and interaction parameter between the graft blocks and solvents. The aggregate morphology stability regions of graft copolymers as functions of the position of first graft point and the number of branches are constructed. It is found that the architectural parameters play a remarkable role in the complex microstructure formation. The interaction between the graft blocks and solvents is also shown to exert an effect on the morphology stability regions. The distributions of the free end and inner blocks of the backbone are found to be different in various aggregate structures. For the circle-like micelles assembled by graft copolymers with a hydrophobic backbone and vesicles assembled by graft copolymers with a hydrophilic backbone, the free end and inner blocks segregate and localize in different parts of the aggregates depending on their length. However, with respect to the large compound micelles and vesicles assembled by graft copolymers with a hydrophobic backbone, the free end and inner blocks uniformly mix in the clusters.     

Enhancement of cellular uptake and antitumor efficiencies of micelles with phosphorylcholine

Internalization of drug delivery micelles into cancer cells is a crucial step for antitumor therapeutics. Novel amphiphilic star-shaped copolymers with zwitterionic phosphorylcholine (PC) block, 6-arm star poly(ε-caprolactone)-b-poly(2-methacryloyloxyethyl phosphorylcholine) (6sPCL-b-PMPC), have been developed for encapsulation of poorly water-soluble drugs and enhancement of their cellular uptake. The star-shaped copolymers were synthesized by a combination of ring-opening polymerization (ROP) and atom transfer radical polymerization (ATRP). The copolymers self-assembled to form spherical micelles with low critical micelle concentration (CMC). The sizes of the micelles range from 80 to 170 nm and increase 30 ≈ 80% after paclitaxel (PTX) loading. Labeled with fluorescein isothiocyanate (FITC), the micelles were confirmed by fluorescence microscopy to have been internalized efficiently by tumor cells. Direct visualization of the micelles within tumor cells by transmission electron microscopy (TEM) confirmed that the 6sPCL-b-PMPC micelles were more efficiently uptaken by tumor cells compared to PCL-b-PEG micelles. When incorporated with PTX, the 6sPCL-b-PMPC micelles show much higher cytotoxicity against Hela cells than PCL-b-PEG micelles, in response to the higher efficiency of cellular uptake.