On the Modification of Chitosan Through Grafting

Abstract

The feasibility of grafting poly(methyl acrylate) and poly[1-(methoxycarbonyl) ethylene] onto chitosan, poly-β(1←-4)-2-amino-2-deoxy-d-glucose, was investigated. The grafting reaction was carried out in aqueous solution by using ferrous ammonium sulfate (FAS) in combination with H₂O₂ as redox initiator. The effects of such reaction variables as chitosan, monomer and initiator concentrations, reaction time, and reaction temperature were determined. Through this study the grafting reaction could be optimized. The grafting yield reached its maximum value of 332% when 0.3 g chitosan was copolymerized with 3 mL monomer at 70°C for 120 minutes with [FAS] = 6 × 10^?5 M, [H₂O₂] = 6 × 10^?3 M, and 8 mL water. The grafted chitosan was found to be insoluble in solvents for chitosan and solvents for poly(methyl acrylate), but did show swelling in dilute acetic acid, methanol, acetone, and in an ethanol/2% acetic acid 1:1 mixture. The thermal stability of chitosan and grafted chitosan were studied by dynamic thermogravimetric analysis. The results show that the graft copolymer is thermally more stable than pure chitosan. The overall activation energy for graft copolymerization was estimated to be 32.8 kcal/mol.     

Synthesis,Characterization, and Antimicrobial Activity of Carboxymethyl Chitosan-Graft-Poly(N-acryloyl,N′-cyanoacetohydrazide) Copolymers

Carboxymethyl chitosan was grafted with N-acryloyl,N′-cyanoacetohydrazide in homogenous aqueous phase using potassium persulfate initiator. The maximum grafting yield achieved was 448% at 0.03 mol/L potassium persulfate, 0.75 mol/L N-acryloyl,N′-cyanoacetohydrazide, and 60°C within 2 h. The grafted copolymers showed better thermal stability than that of carboxymethyl chitosan. The samples with percent grafting values up to 98% were soluble in water, but a higher grafting extent resulted in insoluble copolymers. The grafted copolymers are nontoxic materials and showed an inhibition effect on both Escherichia coli and Staphylococcus aureus bacteria and Aspergillus flavus and Candida albicans fungi better than those of chitosan and carboxymethyl chitosan themselves.     

Graft copolymerization of methyl methacrylate onto curdlan

Graft copolymerization of methyl methacrylate onto curdlan was first investigated. In the graft copolymerization initiated by ammonium persulfate (APS) in DMSO under a homogeneous condition, the resulting graft copolymers had low molecular weights and low grafting percentages. However, the initiation by APS in water gave graft copolymers having relatively higher molecular weight ( ) and higher grafting percentage (548%) than those copolymers obtained by the homogeneous condition. When the graft copolymerization was carried out by cerium (IV) ammonium nitrate-HNO₃ initiation, the graft copolymer had the highest grafting percentage of 1620% without degradation of the curdlan backbone. The resulting graft copolymers were soluble in DMSO. The graft copolymers obtained by the cerium salt had narrow molecular weight distributions () compared with those by the APS catalyst in DMSO or water. The graft copolymers decomposed with sulfuric acid to isolate PMMAs, which molecular weights were larger than that of the corresponding homo-PMMAs. The structure of the grafted copolymers was characterized by IR, ¹³C NMR, DSC, and SEM. It was found that the graft copolymers exhibited the glass transition temperature (T_g), though curdlan had no T_g. As the grafting percentage increased, the T_g increased to reach 270°C, which was higher than the decomposition temperature of curdlan. The surface image of the grafted copolymers observed by SEM, showed smoothless compared with that of curdlan. It was also revealed that the graft copolymers having the grafting percentage of 1620% swelled in common organic solvents up to 4.5 times of the weight of the dry graft copolymer to form gels. © 1996 John Wiley & Sons, Inc.     

Preparation and characterization of chitosan‐graft‐poly (ϵ‐caprolactone) with an organic catalyst

Chitosan‐graft‐poly(ϵ‐caprolactone) was prepared via the ring‐opening graft polymerization of ϵ‐caprolactone (CL) through chitosan with 4‐dimethylaminopyridine as a catalyst and water as a swelling agent. The graft content of PCL within the graft copolymer was adjusted by the feed ratio of CL to chitosan, and the highest grafting concentration of PCL was up to about 400%. Fourier transform infrared, ¹H NMR, and two‐dimensional heteronuclear single quantum coherence analyses indicated that the amino group (NH₂ CH‐2) of chitosan initiated the graft polymerization of CL through the backbone of chitosan, and the hydroxyl group (HO CH_2–6) of chitosan did not participate in initiating the graft polymerization. The percentage of amino groups initiating the graft polymerization decreased with an increasing molar ratio of CL to chitosan in the feed, and this was attributed to the fact that the graft polymerization system increasingly became heterogeneous with an increasing feed ratio of CL to chitosan. The physical properties of the graft copolymers were characterized by thermogravimetric analysis and wide‐angle X‐ray diffraction, respectively. These suggested that the introduction of PCL grafts through the chitosan backbone would to some extent destroy the crystalline structure of chitosan, and the PCL grafts existed in an amorphous structure. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5353–5361, 2006     

Synthesis and characterization of graft copolymers of methacrylonitrile/methacrylate mixtures onto amylomaize by the ceric ion method

Graft polymerizations of mixtures of methacrylonitrile with n-alkyl methacrylales onto amylomaize were carried out. The graft copolymers were characterized by both IR and ¹³C-NMR spectroscopies. The influence of the monomer feed on the grafting parameters has been studied. The variation of these parameters with the mole fraction of methacrylate in the feed for the first three systems studied, MAN/MMA, MAN/EMA and MAN/BMA, was similar: thus, percent grafting (%G, percent weight of grafted polymer with respect to grafted amylomaize), percent grafted amylomaize (%GA, percent weight of grafted amylomaize with respect to initial amylomaize), percent grafting conversion (%C_g, percent weight of grafted polymer with respect to initial monomer), and percent total conversion (%C_t, percent weight of total acrylic polymer with respect to initial monomer) were increased, but percent grafting efficiency (%GE, percent weight of graft copolymer with respect to total polymer) decreased. The system MAN/HMA presented values of grafting parameters lower than those of the previous systems. The optimum values were obtained at 0.6 HMA mole fraction in the monomer feed. When the number of carbon atoms of the n-alkyl group rises from 1 to 4, the increase of the n-alkyl group length gives rise to increases of the %G %C_g and %C_t values and decreases of the %GE and %GA values. For the largest methacrylate, the grafting reaction appears to be controlled by the lesser accessibility of the monomer to the active sites of the carbohydrate. © 1992 John Wiley & Sons, Inc.     

Polymers from renewable resources. II. A study in the radio chemical grafting of poly(styrene‐alt‐maleic anhydride) onto cellulose extracted from pine needles

A binary mixture of styrene and maleic anhydride has been graft copolymerized onto cellulose extracted from Pinus roxburghii needles. The reaction was initiated with gamma rays in air by the simultaneous irradiation method. Graft copolymerization was studied under optimum conditions of total dose of radiation, amount of water, and molar concentration previously worked out for grafting styrene onto cellulose. Percentage of total conversion (Pg), grafting efficiency (%), percentage of grafting (Pg), and rates of polymerization (R_p), grafting (R_g), and homopolymerization (R_h) have been determined as a function of maleic anhydride concentration. The high degree of kinetic regularity and the linear dependence of the rate of polymerization on maleic anhydride concentration, along with the low and nearly constant rate of homopolymerization suggest that the monomers first form a complexomer which then polymerizes to form grafted chains with an alternating sequence. Grafting parameters and reaction rates achieve maximum values when the molar ratio of styrene to maleic anhydride is 1 : 1. Further evidence for the alternating monomer sequence is obtained from quantitatively evaluating the composition of the grafted chains from the FT‐IR spectra, in which the ratio of anhydride absorbance to aromatic (CC) absorbance for the stretching bands assigned to the grafted monomers remained constant and independent of the feed ratio of maleic anhydride to styrene. Thermal behaviour of the graft copolymers revealed that all graft copolymers exhibit single stage decomposition with characteristic transitions at 161–165°C and 290–300°C. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1763–1769, 1999     

Radiation-induced graft polymerization of acrylamide I. Preparation conditions and gel determination for polyethylene-grafted films

Radiation-induced graft polymerization of acrylamide (AAm) onto low-density polyethylene(LDPE) film has been investigated. The appropriate reaction conditions at which the graft polymerization was carried out successfully were selected. It was observed that the grafting process was enhanced remarkably by using distilled water as diluent. In this grafting system ammonium ferrous sulphate (Mohr's salt) was used as inhibitor to minimize the homopolymerization of AAm and the suitable concentration of such inhibitor was found to be 3 wt %. The dependence of the grafting rate on the monomer concentration was calculated to be 2.9 order, regardless of the irradiation atmosphere (N₂ gas or under vacuum). When the radiation grafting process was carried out under vacuum, higher degrees of grafting were obtained as compared to those in nitrogen gas or in air atmosphere. Network structure was formed in the graft copolymer and the gel formation was determined in the p-xylene-extracted grafted films. Results showed good evidence that the grafting process takes place by the front mechanism.     

A study of the graft copolymerization of methacrylic acid onto starch using the H2O2/Fe++ redox system

Graft copolymerization of methacrylic acid (MetAc) onto potato starch using H₂O₂/Fe⁺⁺ redox system was investigated. The best conditions of the grafting reaction were determined and several variables were studied: initiator and monomer concentrations, time, and temperature. Percent grafting efficiency, percent grafting, percent grafted monomer conversion, and total conversion were obtained. The optimum graft yield was obtained at 7.3 × 10^?3M H₂O₂ concentration and it was favored by increasing the methacrylic acid concentration and reaction time.     

Synthesis and Characterization of Chitosan‐graft‐Poly(3‐(trimethoxysilyl)propyl methacrylate) Initiated by Ceric (IV) Ion

The grafting of 3‐(trimethoxysilyl)propyl methacrylate (TMSPM) onto chitosan by ceric ion initiation was studied under homogeneous conditions in 2% acetic acid solution. The grafted polymer was characterized by FT‐IR, ¹H‐NMR, TGA and XRD and swelling studies. TGA results showed that the incorporation of TMSPM to the chitosan chains decreased the thermal stability of the grafted chitosan. Due to the grafting of TMSPM, the crystallinity of chitosan derivatives was found to be destroyed. The solubility of the grafted chitosan in water was improved. The effects of reaction conditions such as initiator concentration, monomer concentration, reaction temperature and reaction time were studied by determining the grafting parameters such as grafting and grafting efficiency. Under optimum conditions, the grafting parameters were achieved as 1440 and 97%, respectively.     

Structure and properties of cellulose graft copolymers. III. Cellulose–methyl methacrylate graft copolymers synthesized by the ceric ion method

The ceric ion-initiated graft copolymerization of methyl methacrylate onto wood cellulose was found to depend on the concentrations of initiator, monomer, and cellulose. The structure of cellulose—methyl methacrylate graft copolymers was studied by hydrolyzing away the cellulose backbone to isolate the grafted poly(methyl methacrylate) branches. The molecular weights and molecular weight distributions of the grafted poly(methyl methacrylate) were determined by using gel-permeation chromatography. The number-average (M?_n) molecular weights ranged from 36 000 to 160 000 and the polydispersity ratios (M?_w/M?_n) varied from 4.0 to 7.0. The grafting frequency or the number of poly(methyl methacrylate) branches per cellulose chain calculated from the per cent grafting and molecular weight data varied from 0.38 to 3.2. The structure of cellulose—methyl methacrylate graft copolymers and the effect of stepwise addition of initiator on the structure are discussed.     

Grafting of living poly(ethylene oxide) onto polystyrene via aromatic nucleophilic displacement of activated nitro groups

Polystyrene of M?_ω = 2.2 × 10⁴ was alkylated with 4-nitrophthalimidomethyl groups as grafting sites. Several backbone polymers with various degrees of grafting sites (G = 2–100%) were prepared and characterized by elemental analysis, IR, ¹H- and ¹³C-NMR, and viscosity measurements. “Living” poly(ethylene oxide) with narrow molecular-weight distribution was prepared in the presence of 15-crown-5, and grafted onto the 4-nitrophthalimidomethylated polystyrene. The nitro displacement reaction was fast and the grafting yield was quantitative (100%). The graft copolymers are highly soluble in water and in organic solvents. The intrinsic viscosities of the graft copolymers are higher than those of the backbone polymers. The intrinsic viscosities show an initial increase followed by a decrease as the degree of grafting increase.     

Peroxide initiated maleic anhydride grafting: Structural studies on an ester‐containing copolymer and related substrates

Maleic anhydride (MAn) was grafted onto the low molecular weight esters methyl decanoate (MD) and methyl 2‐ethylhexanoate (MEH) using the free‐radical initiators Lupersol‐101 and ‐130; the esters were used as model compounds for the copolymer poly(ethylene‐co‐methyl acrylate). The grafted products in both cases were isolated from the unreacted ester and were subjected to extensive analysis using spectroscopic and chromatographic techniques. Analysis of the grafted material indicated the presence of one or more succinic anhydride (SAn) residues grafted to the ester. In the case of the multiply grafted material it has been established conclusively by ¹³C‐NMR using 2,3‐¹³C₂ labeled MAn that the multiple grafts exist as single units. A limited number of grafting experiments was performed on the copolymer in the melt and the graft‐modified copolymer was characterized spectroscopically. Single graft units were observed. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1609–1618, 1999     

Grafting of polymers with controlled molecular weight onto ultrafine silica surface

To graft polymers with controlled molecular weight and narrow molecular weight distribution, the grafting of polymers onto ultrafine silica surface by the termination of living polymer cation with amino groups introduced onto the surface was investigated. The introduction of amino or N-phenylamino groups onto the silica surface was achieved by the treatment of silica with γ-aminopropyltriethxysilane or N-phenyl-γ-aminopropyltrimethoxysilane. It was found that these amino groups on silica are readily reacted with living poly(isobutyl vinyl ether) (polyIBVE), which was generated with CF₃COOH/ZnCl₂ initiating system, and polyIBVE with controlled molecular weight and narrow molecular weight distribution is grafted onto the surface. By the termination of living poly(2-methyl-2-oxazoline), which was generated with methyl p-toluenesulfonate initiator, with amino groups on silica, polyMeOZO was also grafted onto the surface. The percentage of grafting of polymer onto the silica surface decreased with increasing molecular weight of the living polymer, because the steric hindrance of silica surface increases with increasing molecular weight of living polymer. Polymer-grafted silica gave a stable dispersion in a good solvent for grafted chains. © 1995 John Wiley & Sons, Inc.     

Functionalization of medium-chain-length poly(3-hydroxyalkanoates) as amphiphilic material by graft copolymerization with glycerol 1,3-diglycerolate diacrylate and its mechanism

Glycerol 1,3-diglycerolate diacrylate (GDD) was graft copolymerized onto poly(3-hydroxyoctanoate-co-3-hydroxyhexanoate) P(3HO-co-3HHX) to render the latter more hydrophilic. Grafting of P(3HO-co-3HHX) backbone was performed using benzoyl peroxide as free radical initiator in homogenous acetone solution. The graft copolymer of P(3HO-co-3HHX)-g-GDD was characterized using spectroscopic and thermal methods. The presence of GDD monomer in the grafted P(3HO-co-3HHX) materials linked through covalent bond was indicated by spectroscopic analyses. Different parameters affecting the graft yield viz. monomer concentration, initiator concentration, temperature and reaction time were also investigated. Water uptake measurement showed that P(3HO-co-3HHX)-g-GDD copolymer became more hydrophilic as the GDD concentration in the copolymer increased. Introduction of hydroxyl groups via grafted GDD monomers improved the wettability and imparted amphiphilicity to the graft copolymer, thus potentially improving their facility for cellular interaction. Thermal stability of grafted copolymer reduced with increased grafting yield. The activation energy, E_a, for the graft copolymerization was calculated at ～ 51 kJ mol^?1. Mechanism of grafting reaction was also proposed.     

Living radical graft polymerization of methyl methacrylate to polyethylene film with typical and reverse atom transfer radical polymerization

Nickel‐mediated atom transfer radical polymerization (ATRP) and iron‐mediated reverse ATRP were applied to the living radical graft polymerization of methyl methacrylate onto solid high‐density polyethylene (HDPE) films modified with 2,2,2‐tribromoethanol and benzophenone, respectively. The number‐average molecular weight (M_n) of the free poly(methyl methacrylate) (PMMA) produced simultaneously during grafting grew with the monomer conversion. The weight‐average molecular weight/number‐average molecular weight ratio (M_w/M_n) was small (<1.4), indicating a controlled polymerization. The grafting ratio showed a linear relation with M_n of the free PMMA for both reaction systems. With the same characteristics assumed for both free and graft PMMA, the grafting was controlled, and the increase in grafting ratio was ascribed to the growing chain length of the graft PMMA. In fact, M_n and M_w/M_n of the grafted PMMA chains cleaved from the polyethylene substrate were only slightly larger than those of the free PMMA chains, and this was confirmed in the system of nickel‐mediated ATRP. An appropriate period of UV preirradiation controlled the amount of initiation groups introduced to the HDPE film modified with benzophenone. The grafting ratio increased linearly with the preirradiation time. The graft polymerizations for both reaction systems proceeded in a controlled fashion. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3350–3359, 2002     

Pre‐Irradiation Grafting of Styrene/Divinylbenzene onto Poly(tetrafluoroethylene‐co‐hexafluoropropylene) from Non‐Solvents

Pre‐irradiation grafting of styrene/divinylbenzene (DVB) onto poly(tetrafluoroethylene‐co‐hexafluoropropylene) (FEP) films was studied with respect to the influence of solvent. Particularly favorable grafting conditions with long radical lifetimes and reasonably high polymerization rates were achieved with solvents that are precipitants for the newly formed polystyrene, e.g., low‐molecular‐mass alcohols like ⁱPrOH, AcOH, their mixtures with H₂O, and H₂O/surfactant systems. Using one of these solvents significantly extended the range of accessible graft levels, and a specific degree of grafting was obtained at a much lower monomer concentration and irradiation dose than with grafting in a good solvent such as toluene. As practical consequences, the monomer was used more efficiently, and the radiation damage of the perfluorinated base material was reduced with the result of improved mechanical properties of the grafted films.     

Radical grafting on lignin. Part I. Radiation-induced grafting of styrene onto hydrochloric acid lignin

By irradiation with gamma rays styrene was grafted onto hydrochloric acid lignin. When the graft polymers were subjected to nitrobenzene oxidation, the vanillin yields indicated two kinds of reaction occurring in the grafting. Polystyrene branches were separated from the graft polymers, and their M?_n were determined osmometrically. At grafting ratios of up to 100 the vanillin yields diminished proportionately with increasing grafting, and the M?_n of the branches, 5000, was unchanged. At grafting ratios of more than 100 the vanillin yields were constant, independent of the ratios, but the M?_n values of the branches increased with grafting. Paper chromatography of the aromatic acids obtained by oxidation of methylated lignin and the graft polymer indicated that isohemipic and metahemipic acids were more abundant in the acid fraction of the graft polymer than in the lignin itself. A qualitative mass analysis of the gaseous products evolving from the irradiated lignin showed the presence of hydrogen molecules only. Gamma-ray radiation brought about no change in the yields of vanillin. It was therefore concluded that radiation grafting on lignin at grafting ratios of less than 100 proceeded through the addition of the styrene polymer radicals to the aromatic nuclei of the lignin and that then branches propagated from the aliphatic part of the lignin, where C? H bond scission had been caused by the irradiation. The grafting sites of lignin would be C-5 and C-6 of the guaiacyl nucleus and, probably the β and γ carbon atoms of the aliphatic side chain of the lignin.     

Graft Copolymerization on to Cellulose Using Binary Mixture of Monomers

The graft copolymerization of acrylonitrile (AN) and ethyl acrylate (EA) comonomers onto cellulose has been carried out using ceric ammonium nitrate (CAN) as an initiator in the presence of nitric acid at 35±0.1°C. The addition of ethyl acrylate as comonomer has shown a significant effect on overall and individual graft copolymerization of acrylonitrile on cellulose. The graft yield (%G_Y) and other grafting parameters viz. true grafting (%G_T), graft conversion (%C_G), cellulose number (Ng) and frequency of grafting (G_F) were evaluated on varying the concentration of comonomers from 6.0–30.0×10^?1 mol dm^?3 and ceric (IV) ions concentration from 2.5–25×10^?3 mol dm^?3 at constant feed composition (f_AN 0.6) and constant concentration of nitric acid (7.5×10^?2 mol dm^?3) in the reaction mixture. The graft yield (%G_Y) and other grafting parameters were optimal at 15×10^?1 mol dm^?3 concentration of comonomers and at 10×10^?3 mol dm^?3 concentration of ceric ammonium nitrate. The graft yield (%G_Y) and composition of grafted chains (F_AN) was optimal at a feed composition (f_AN) of 0.6. The energy of activation (Ea) for graft copolymerization has been found to be 16 kJ mol^?1. The molecular weight (Mw) and molecular weight distribution (Mw/Mn) of grafted chains was determined by GPC and found to be optimum at 15×10^?1 mol dm^?3 concentration of comonomer in the reaction mixture. The composition of grafted chains (F_AN) determined by IR method was used to calculate the reactivity ratios of monomers, which has been found to be 0.62 (r₁) and 1.52 (r₂), respectively for acrylonitrile (AN) and ethyl acrylate (EA) monomers used for graft copolymerization. The energy of activation for decomposition of cellulose and grafted cellulose was determining by using different models based on constant and different rate (β) of heating. Considering experimental observations, the reaction steps for graft copolymerization were proposed.     

Photoinduced Graft Copolymerization onto Chitosan Under Heterogeneous Conditions

Photoinitiated graft copolymerization of acrylamide onto chitosan under heterogeneous conditions and in the absence of a photo initiator was investigated. The effect of irradiation time, the amount of chitosan and monomer concentration on the extent of grafting was examined. The maximum grafting percentage obtained was 294%. The copolymer was characterized using carbon-13 nuclear magnetic resonance (¹³C-NMR) spectroscopy, X-ray diffraction analysis (XRD), differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). The system designed allows synthesis of grafted chitosan with free amine groups which are otherwise possible only by chemical protection. The swelling properties of copolymer were followed in aqueous solution.     

Grafting of glycidyl methacrylate onto polypropylene using supercritical carbon dioxide

Free-radical grafting of glycidyl methacrylate (GMA) onto polypropylene (PP) films has been studied using supercritical carbon dioxide (SC-CO₂) as a solvent and a swelling agent. As the reaction temperature was below the melting point, PP was modified in the solid phase. The PP film was first soaked with the monomer GMA and benzoyl peroxide (BPO) as an initiator using SC-CO₂ at different experimental conditions of pressure, temperature, and thermal treatment time. After releasing CO₂, film GMA molecules were grafted onto PP in different times. Using this method, the degree of grafting and the morphology could be controlled through the combination of pressure, temperature, and soaking time. FTIR spectra confirmed that GMA had been grafted onto PP and that polypropylene-graft-glycidyl methacrylate (PP-g-GMA) presented a high surface reactivity for conductive polyaniline anchoring. DSC measurements and TG analyses showed that the thermal profiles of the graft copolymer and virgin PP are quite similar and that the graft PP does not exhibit changes in terms of thermal degradation profile and melting temperature, respectively. X-ray data showed that a high degree of grafting leads to a lower degree of crystallinity of polypropylene.