Synthesis and Properties of Poly(AAm‐KMA‐MA) Hydrogels

In this investigation, poly(acrylamide‐co‐potassium methacrylate‐co‐maleic acid) hydrogels, poly(AAm‐KMA‐MA) were synthesized by redox copolymerization in aqueous solution. The effect of reaction parameters, such as concentration of maleic acid, crosslinking agent, initiator and activator, on the swelling behavior was investigated in detail. The swelling/diffusion characteristics were also evaluated for 1,4‐butanediol diacrylate (BDDA) and 1,2‐ethyleneglycol dimethacrylate (EGDMA) crosslinked hydrogels having different amounts of maleic acid. The results indicate that the water diffusion of hydrogels was of a non‐Fickian type. The hydrogels were characterized by IR spectroscopy and thermogravimetric analysis (TGA). Their surface characteristics were observed by using scanning electron microscopy (SEM). Furthermore, their swelling phenomena in different pH and salt solutions and simulated biological fluids was also studied.     

Investigation of Spectroscopic and Thermal Properties of Poly(o‐toluidine) Doped with Polymeric Acids

Single step polymerization of poly(o‐toluidine) was carried out by using ammonium persulphate as an oxidizing agent. Formation of the conducting emeraldine salt phase of the polymer was confirmed by the UV‐visible and FT‐IR spectroscopic analysis. The elemental composition of the polymer was evaluated by using a CHNS analyzer. Thermal stability of these polymers was investigated by the thermogravimetric analysis. Among the three polymeric acids used for doping purposes, poly(acrylic acid) doped material was found to show less thermal stability compared to poly(styrene sulphonic acid) and poly(vinyl sulphonic acid) doped poly(o‐toluidine).     

Synthesis,Characterization, and Photocrosslinking Properties of Poly(4‐Methacrylamidophenyl‐2′,3′‐benzostyryl Ketone)

Abstract

A new methacrylamide monomer, 4‐methacrylamidophenyl‐2′,3′‐benzostyryl ketone (MPBSK) having a free‐radical polymerizable group and a photocrosslinkable functional group, was synthesized by reacting 4‐(2′,3′‐benzocinnamoyl)aniline with methacryloyl chloride in the presence of triethyl amine. The monomer, MPBSK was polymerized in methyl ethyl ketone (MEK) at 70°C using benzoyl peroxide (BPO) as the initiator. The polymer was characterized by UV, IR, ¹H‐NMR, and ¹³C‐NMR spectroscopy. The polymer was found to be soluble in several polar aprotic solvents and in chlorinated solvents but insoluble in aliphatic and aromatic hydrocarbons and in alcohols. The molecular weight data of the polymer as obtained from gel permeation chromatography suggests a higher tendency for chain termination by disproportionation than dimerization. The glass transition temperature of the polymer was determined by differential scanning calorimetry. Thermogravimetric analysis of the polymer carried out in air reveals that it possesses good thermal stability required of a negative photoresist. The photocrosslinking property of the polymer was investigated by irradiating the polymer solution with UV light in the presence and absence of triplet photosensitizers. The effect of the solvent on the rate of photocrosslinking of the polymer was also studied.     

Synthesis,Thermal Properties,and Radiolysis of Poly(Cyclohexyl α-Chloroacrylate)

Cyclohexyl α-chloroacrylate (CCA) was polymerized by radical anionic and γ-radiation initiation. The anionic polymerization of cyclohexyl α-chloroacrylate gave moderately isotactic polymer in toluene and syndiotactic-rich polymer in THF. Poly(cyclohexyl α-chloroacrylate) (PCCA) was found to undergo two-stage weight loss in thermogravimetric analysis, and the first-stage weight loss was attributed to the lactonization reaction. PCCA degraded under γ-radiation, and the radiation yields of crosslinking and scission, G _x and G _s, were 0.6 and 3.8, respectively.     

Synthesis and Characterization of Poly(methyl methacrylate‐co‐hydroxyethyl methacrylate)‐b‐polyisobutylene‐b‐poly(methyl methacrylate‐co‐hydroxyethyl Methacrylate) Triblock Copolymers

The synthesis of poly[(methyl methacrylate‐co‐hydroxyethyl methacrylate)‐b‐isobutylene‐b‐(methyl methacrylate‐co‐hydroxyethyl methacrylate)] P(MMA‐co‐HEMA)‐b‐PIB‐b‐P(MMA‐co‐HEMA) triblock copolymers with different HEMA/MMA ratios has been accomplished by the combination of living cationic and anionic polymerizations. P(MMA‐co‐HEMA)‐b‐PIB‐b‐P(MMA‐co‐HEMA) triblock copolymers with different compositions were prepared by a synthetic methodology involving the transformation from living cationic to anionic polymerization. First, 1,1‐diphenylethylene end‐functionalized PIB (DPE‐PIB‐DPE) was prepared by the reaction of living difunctional PIB and 1,4‐bis(1‐phenylethenyl)benzene (PDDPE), followed by the methylation of the resulting diphenyl carbenium ion with dimethylzinc (Zn(CH₃)₂). The DPE ends were quantitatively metalated with n‐butyllithium in tetrahydrofuran, and the resulting macroanion initiated the polymerization of methacrylates yielding triblock copolymers with high blocking efficiency. Microphase separation of the thus prepared triblock copolymers was evidenced by the two glass transitions at ?64 and +120°C observed by differential scanning calorimetry. These new block copolymers exhibit typical stress‐strain behavior of thermoplastic elastomers. Surface characterization of the samples was accomplished by angle‐resolved X‐ray photoelectron spectroscopy (XPS), which revealed that the surface is richer in PIB compared to the bulk. However, a substantial amount of P(MMA‐co‐HEMA) remains at the surface. The presence of hydroxyl functionality at the surface provides an opportunity for further modification.     

Preparation and Characterization of Poly(N‐Vinylpyrrolidone‐co‐Methacrylic Acid) Hydrogels

In this study, N‐vinylpyrrolidone (VP)/methacrylic acid (MAA) copolymers have been prepared at three different mole percents, the methacrylic acid composition being around 5, 10, 15%. MAA and VP monomer mixtures have been irradiated in ⁶⁰Co‐γ source at different irradiation doses and percent conversions have been determined gravimetrically. ～80% conversion of monomers into hydrogels were performed at 3.4 kGy irradiation dose. These hydrogels were swollen in distilled water at pH 4.0, 7.0, and 9.0. P(VP/MAA) hydrogel which contains 5% methacrylic acid showed the maximum % swelling at pH 9.0 in water. Diffusion of water was found to be of non‐Fickian character. Diffusion coefficients of water in P(VP/MAA) hydrogels were calculated. Initial swelling rates of P(VP/MAA) hydrogels increased with increasing pH and MAA content in hydrogels. Swelling kinetics of P(VP/MAA) hydrogels was found to be of second order. Thermal behavior of PMAA, PVP and P(VP/MAA) hydrogel were investigated by thermal analysis. P(VP/MAA) hydrogel gained new thermal properties and the temperature for maximum weight loss and temperature for half‐life of P(VP/MAA) hydrogel were determined.     

The Synthesis and Electronic Characteristics of Poly(p-Phenylene Vinylene) Derivatives

Poly(P-phenylenevinylene)rePV)anditsderivahveshavearousedgreatinterest,"'sinceBurroughes'discoveredilmtPPVshowedexcellentelectrolulninescent(EL)propelles.However,PPVanditsderivativessynthesizedbyconventionalpolylnerizationreachons4areusuallyinsolubleandinfusible,wllicllshowsinferiorineclwnicalpropelles.AlthoughtheprecursorpolymerroutecancirculllventhleinsolubilityofPPV,thestfategyneedsamuhstepreachonandaltiglltemperaturewlilcllaITordsaleyieldandohlerdisadvantages.'So1lieSynthesisofsolub…     

Synthesis,Characterization and Photocrosslinking Properties of Poly(1‐(4‐Methacrylamidophenyl)‐1‐(4‐nitrophenyl)prop‐1‐en‐3‐one)

The phenylmethacrylamide monomer, 1‐(4‐methacrylamidophenyl)‐1‐(4‐nitrophenyl)prop‐1‐en‐3‐one (MPNP) containing a photosensitive group was synthesized by reacting 4‐nitrocinnamoylaniline with methacryloyl chloride in the presence of triethylamine at 0–5°C. The functional monomer, MPNP was polymerized in ethyl methyl ketone (EMK) under nitrogen atmosphere at 70°C using benzoyl peroxide (BPO) as the initiator. The synthesized polymer was characterized by UV, IR, ¹H‐NMR and ¹³C‐NMR spectroscopy. The molecular weight data of the polymer as obtained from gel permeation chromatography suggests a higher tendency for chain termination by radical recombination than disproportionation. The thermal studies of the polymer were obtained from thermogravimetric analysis. The glass transition temperature of the polymer was determined by differential scanning calorimetry. The solubility of the polymer was tested in various organic solvents at room temperature. The photosensitivity of the polymer was investigated in various solvents in the presence and absence of triplet photosensitizers. The effect of the different solvents nature and concentration on the rate of photocrosslinking of the polymer were also examined for using the polymer as negative photoresist materials.     

The Preparation and Biodegradable Properties of Poly(L‐lactic acid)‐Poly(ϵ‐caprolactone) Multiblock Copolymers

Multi‐block copolymers of PLLA and PCL were prepared by a coupling reaction between PLLA and PCL prepolymers with –NCO end groups. FTIR proved that the products were PLLA‐PCL copolymers. The weight‐average molecular weight of the copolymers was up to 180,000 at a composition of 60% PLLA and 40% PCL. The degradation properties of PLLA and PLLA‐PCL copolymers were studied by a soil burial test and a hydrolysis test in a phosphate‐buffer solution. The degradation rate was estimated by the mass loss, molecular weight reduction, pH value changes and swelling index; the degradation rates of the copolymers were a function of the composition of PLLA and PCL. Increasing PCL content in the copolymers resulted in lower degradation rate.     

Synthesis of Poly(IB‐co‐VBDC)‐g‐PMMA via Photo‐initiated Free Radical Graft Polymerization

Abstract

Photoinitiated free radical graft polymerization of methyl methacrylate (MMA) with poly[isobutene‐co‐(4‐vinyl benzyl N,N‐diethyldithiocarbamate)] [poly(IB‐co‐VBDC)] as macromolecular iniferter was investigated. The polymerization proceeds to give a high yield graft copolymer, however it was observed that even in the early stage of the polymerization there formed an insoluble polymer. In the presence of tetraethylthiuram disulfide (TETD) the gel fraction of the yield graft copolymer was drastically reduced and the polymerization was retarded as well. When the [TETD]/[VBDC] increased from 0 to 1.0, the gel fraction of the graft copolymer decreased from 33.2% to 1.6% (wt) while the fraction of the homopolymer of the MMA increased from 4.5% to 10.5% (wt). With the increasing of the UV irradiation time, both the MMA conversion and the molecular weight of the graft copolymer increased readily.     

Synthesis, Characterization and Solution Properties of Hydrophobically Modified Polyelectrolyte Poly(AA-co-TMSPMA)

The hydrophobically modified polyelectrolyte was synthesized using precipitation polymerization of acrylic acid and 3-[tris(trimethylsilyloxy)silyl]propyl methacrylate (TMSPMA) in various molar ratios in supercritical carbon dioxide. FT-IR, ¹H NMR, capillary viscometry, rotational viscometer, transmission electron microscopy and fluorescence spectroscopy were used to characterize this copolymer. The viscosity of the copolymers showed a strong dependence on pH with a maximum at pH=5.5. Associating morphologies of the copolymer were observed by TEM. Associating morphologies of poly(AA-co-TMSPMA) solution changed from a global structure to a shell-core structure with increasing hydrophobic levels. A solution of sample PAT4 with a shell-core structure had the largest viscosity value. In addition, the critical micelle concentration of copolymer solution, cmc, was determined from the relative viscosity. The critical micelle concentration was further confirmed by fluorescence spectroscopy using 1-pyrenemethylamine hydrochloride, PyMeA⋅HCl, as a cationic fluorescent probe. The cmc was determined from the intensity ratios, the first to the third emission peaks I ₁/I ₃, and the excimer to monomer I _E/I _M ratio of the pyrene probe as a function of concentration.     

Synthesis and Characterization of Hydroxyl‐Terminated Poly(γ‐benzyl‐L‐glutamate)

In order to provide an active end group of hydroxyl group and improve the hydrophility of poly(γ‐benzyl‐L‐glutamate) (PBLG), ethanolamine (EA) was utilized as the initiator to initiate N‐carboxy‐γ‐benzyl‐L‐glutamate anhydride (Bz‐L‐Glu‐NCA) polymerization. The prepared hydroxyl‐terminated PBLG (HO‐PBLG) was fully characterized by FTIR, ¹H‐NMR, XPS, XRD, DSC, and GPC. The results of FTIR and XRD indicated that the chain conformation of HO‐PBLG predominantly presented α‐helix. The water contact angle was measured to confirm that the hydrophilicity was improved by the introduction of hydroxyl group. Chondrocytes studies showed that the cells attachment efficiency on the HO‐PBLG film was good and the cells grew well.     

Characterization of Poly(ethyleneoxyethylene terephthalate‐co‐adipate) using NMR Spectroscopy

Comonomer sequence distribution and ¹H‐NMR chemical shifts were determined for poly(ethyleneoxyethylene terephthalate‐co‐adipate) (PEOETA) copolyester. The sequence distribution of terephthalate (T) and adipate (A) residues was found to be random, which is typical for copolyesters synthesized via bulk polycondensation. The inner methylene protons of EOE residues appeared as a pair of doublets due to chemical shift differences among the EOE‐centered dyad sequences TT, TA, AT, and AA. The four equivalent phenylene protons of T residues appeared as a triplet due to chemical shift differences among the T‐centered triad sequences TTT, TTA (?ATA), and ATA. Higher‐order tetrad and pentad sensitivity were also observed for the inner methylene and phenylene protons, respectively, especially for TT‐ and TTT‐centered sequences. The sequence sensitivity of the phenylene protons was attributed to unique spatial interactions between themselves and protons within adjacent adipate and EOE units. These spatial interactions were confirmed using Nuclear Overhauser Enhancement Spectroscopy (NOESY).     

Electrical,Mechanical, and Thermal Properties of Poly(4,4′-Cyclohexylidene Diphenylene-m-Benzene/Toluene-2,4-Disulfonate)

Abstract

The films of poly(4,4′-cyclohexylidene diphenylene-m-benzene disulfonate) (PSBB, 0.610 mm thick) and poly(4,4′-cyclohexylidene diphenylene-toluene-2,4-disulfonate) (PSBT, 0.537 mm thick) showed 8.23 ± 0.25 and 9.6 ± 0.245 kV, respectively, as the dielectric breakdown voltage (ac) in air at room temperature. The same films have 8.8 × 10¹¹ and 7.2 × 10¹⁴ ω°Cm volume resistivity. PSBB (40 μm thick) and PSBT (50 μm thick) films have tensile strengths of 1971 and 1677 kg/cm² and percent elongations of 1.3 and 1.2, respectively. The static hardnesses of PSBB (0.178 mm thick) and PSBT (0.190 mm thick) at three different loads (15–60 g) are 12.8–15.5 and 14.5–16.5 kg/mm², respectively. PSBB and PSBT are thermally stable up to about 355°C in an N₂ atmosphere and involve two-step degradation. DSC and DTA showed T _g at about 125–127 and 138–142°C, respectively, for PSBB and PSBT in N₂. PSBB and PSBT have comparable breakdown voltages and volume resistivity with some useful plastics whereas they have superior T _g and thermal stability with retention of excellent solubility in common solvents over polysulfonates without a cardo group. Thus, the cardo (cyclo-hexyl) group has enhanced thermal and mechanical properties with excellent solubility and easy processing.     

Electronic Properties and Morphology of Beam‐Oligomerized 3‐Hexylthiophene

Abstract

A novel means of lithographically forming fluorescent oligothiophene patterns is demonstrated. MgKα x‐ray and low energy electron irradiation of 3‐hexylthiophene (3HT) monomer condensed on a cold metal surface result in the formation of photoluminescent films as thick as several microns. The excitation maxima for the x‐ray‐ and electron‐formed samples are 350 and 405 nm, respectively, with corresponding emission maxima of 430 and 525 nm, indicating that the films are oligomeric rather than polymeric. Ultraviolet photoelectron spectra (UPS) of 3HT monomer and beam‐formed films have been compared with theoretically simulated density‐of‐states spectra of 3HT, thiophene, bithiophene, terthiophene, and quaterthiophene. The radiation‐induced changes in the 3HT UPS valence spectra are explained by delocalization of electrons along the oligomer backbone. Comparison of the experimental UPS and simulated spectra suggests that the average conjugation length of the beam‐formed films is less than six. This is consistent with the photoluminescence results. Fluorescence and atomic force microscopies of electron‐formed samples show the presence of oligomerized 3HT islands residing on a less fluorescent organic background. Electrical conductivity of the beam‐formed samples is low, on the order of 10^?9 cm^?1 ohm^?1, consistent with the formation of islands of conjugated material surrounded by a less electronically delocalized, insulating background. Lack of solubility of the beam‐formed films suggests that partial crosslinking and decomposition may also occur during the oligomerization process.     

The Synthesis, Photoconductivity, Photoinduced Charge Transfer, and Other Properties of HEC-TCNQ

IntroductionInl99o,Sutteretal.preParedthefirstorganicphotorefrachvecrystalsCoANP:TCNQbydoPingnon-linearopticalcrystalCOANPwithTCNQ.l1]Sincethen,quitealotofattentionwasdirectedintothisfield.[2'3]TherearetWobasicprerequisitesforamaterialtohavephotorefractiveeffectfhavingthesecondorderoPticalnon-linearityandthephotoconductivitythatiscloselyrelatedwithphotoinducedinermolecularchargetransfer.RecentlyitwasrePOrtedthatHEC(9-hydroxyethylcarbazole)ethibitedinterestingnon-linearityandphotocon…     

Phase Behavior and Morphology of Poly(Methyl Methacrylate)/Poly(α‐Methyl Styrene‐co‐Acrylonitrile) Blends Under Quiescent and Shear Flow

The kinetics of spinodal decomposition (SD) for the binary blend poly(methyl methacrylate), PMMA, and Poly(α‐methylstyrene‐co‐acrylonitrile), PαMSAN, with 31 wt% AN content (LCST‐type phase diagram) has been thoroughly studied using a time‐resolved light scattering technique. The early stage SD was dominated by a diffusion process and can be well described within the framework of the linearized Cahn‐Hilliard theory. The spinodal temperature could be evaluated from the analysis of the early stage SD based on the Cahn theory. In addition, viscoelastic properties of this system have been systematically investigated at temperatures below and above the LCST phase diagram. The linear viscoelastic properties of the blends were found to be greatly changed by phase separation in the two‐phase regime. This change in the linear viscoelastic properties attributed to an additional contribution of concentration fluctuations to the material functions at the phase separation temperatures. The phase diagram of the blends was also estimated rheologically through the dynamic temperature ramps of G′, G″ and η*. Furthermore, the phase behavior and morphology of this system has been studied under different shear rates using simple shear apparatus and transmission electron microscopy (TEM), respectively.     

Synthesis and Magnetic Properties of Fe(II) and Nd(III) Complexes of Poly(N-2-thiazolylacrylamide)

In recent years,the organic ferromagnets have drawn growing attention due to their characteristics of structural diversities,low density,and readily processing1-3.Design and synthesis of magnetic polymers are one of great challenges in today′s magnetic material research,and some significant achievements have been made in this field4,5.In this article,we describe the synthesis of acrylamide-type polymer with pendent thiazolyl groups(Scheme1).The as-prepared polymer exhibited better solubility …     

Synthesis,Structures, and Properties of Novel N‐Aryl‐phenanthren‐o‐iminoquinones

The interaction of 9,10‐phenanthrenquinone with primary amines has been studied. Use of sterically hindered anilines gave the phenanthren‐o‐iminoquinones in good yields. These compounds are structural analogues of o‐benzoquinones. Using single‐electron reduction, o‐iminoquinones may synthesize metal's free‐radical complexes.     

Biomimetic Synthesis of Water Soluble Conductive Polypyrrole and Poly(3,4‐Ethylenedioxythiophene)

Abstract

A novel biomimetic method for the synthesis of conducting molecular complexes of polypyrrole (PPYR) and poly(3,4‐ethylenedioxythiophene) (PEDOT) in the presence of a polyelectrolyte, such as polystyrene sulfonate (SPS) is presented. A poly(ethylene glycol) modified hematin (PEG‐Hematin) was used to catalyze the polymerization of pyrrole (PYR) and 3,4‐ethylenedioxythiophene (EDOT) in the presence of SPS to form PPYR/SPS and PEDOT/SPS complexes. UV‐VIS, FT‐IR, and electrical conductivity studies for all complexes indicated the presence of a stable and electrically conductive form of these polymers. Furthermore, the presence of SPS in this complex provides a unique combination of properties such as processability and water‐solubility.