Aggregation Behavior of Cationic Copolymer Methacryloxyethyl Trimethyl Ammonium Chloride‐Butyl Acrylate‐Acrylamide in Aqueous Solution

The aggregation behavior of cationic copolymer methacryloxyethyl trimethyl ammonium chloride‐butyl acrylate‐acrylamide (MTAC‐BA‐AM) was investigated via surface property and fluorescence spectroscopy measurements, as well as Mesodyn simulation, etc. The experimental results indicate that MTAC‐BA‐AM has the ability for decreasing surface tension of water and there are two break points in the surface tension isotherm; and its surface dilational viscoelasticity and apparent viscosity in aqueous solution depend upon aggregate structure. The Mesodyn simulation results show that spherical, cylindrical aggregates, and network structures form in aqueous solution with the concentration increasing. The aggregation process is driven by enthalpy and can be divided into two stages. The first stage is controlled by diffusion, while the second one is controlled by hydrophobic interaction.     

Microwave‐Induced Conversion of Acid Hydrazides to N,N′‐Diacylhydrazines in Solvent‐Free Conditions

A new and efficient method of converting acid hydrazides 1 to the corresponding N,N′‐diacylhydrazines 2 under microwave irradiation and in solvent‐free conditions has been described.     

Oxidation of Oxalic Acid in the Ozone–Chloride–Ion Reaction System in an Aqueous Solution

Russian Journal of Physical Chemistry A - It is shown that the rate of oxidation of oxalic acid H2C2O4 during the ozonation of its solutions grows considerably if sodium chloride is added to the...     

The Effects of Salts and Ionic Surfactants on the Micellar Structure of Tri‐Block Copolymer PEO‐PPO‐PEO in Aqueous Solution

The micelles of two poly(ethylene oxide)‐poly(propylene oxide)‐poly(ethylene oxide) (PEO‐PPO‐PEO) block copolymers, P123 and F127 (same mol wt of PPO but different % PEO) in aqueous solution in the absence and presence of salts as well as ionic surfactants were mainly examined by dynamic light scattering (DLS). The study is further supported by cloud point and viscosity measurements. The change in cloud point (CP), as well as the size of micelles in aqueous solution in presence of salts obeys the Hofmeister lyotropic series. Addition of both cationic cetylpyridinium chloride (CPC) and anionic sodium dodecylsulfate (SDS) surfactants in the aqueous solution of P123 show initial decrease of micellar size from 20 nm to nearly 7 nm and then increasing with a double relaxation mode, further in the presence of NaCl this double relaxation mode vanishes. The effect of surfactant on F127, which has much bigger hydrophilic part is different than P123 and have no double relaxation. The relaxation time distributions is obtained using the Laplace inversion routine REPES. Two relaxation modes for P123 are explained on the bases of Pluronic rich mixed micelles containing ionic surfactants and the other smaller, predominantly surfactant rich micelles domains.     

Polymerization of Acrylamide in Aqueous Solution of Poly(N‐isopropylacrylamide) at Lower Critical Solution Temperature

Acrylamide (AAm) was found to polymerize in a solution of poly(N‐isopropylacrylamide) (PNIPAAm) in water at around its lower critical solution temperature (LCST) (32°C) without any initiators. This phenomenon was specifically observed in aqueous solutions of the polymers having LCST such as PNIPAAm and poly(methylvinylether) (PMVE). AAm polymerized only when PNIPAAm and AAm were dissolved in water below LCST of PNIPAAm and then the solution was warmed up to the polymerization temperature (40°C). On the other hand, the polymerization of AAm did not proceed when AAm was added into aqueous PNIPAAm solution during and after the phase separation above 32°C. Furthermore the polymerizability of AAm was remarkably affected by the concentration and molecular weight of the PNIPAAm additives. Under the condition of lower PNIPAAm concentration (0.30 mol/L), the increase in the molecular weight of PNIPAAm considerably increased the molecular weight of the resulting PAAm but decreased the yield of PAAm. Under the condition of higher PNIPAAm concentration (0.60 mol/L) the polymerizability was not so affected by the molecular weight of PNIPAAm, while the molecular weight of PAAm formed by using higher molecular weight PNIPAAm was higher than those of PAAm formed by using lower molecular weight PNIPAAm. Moreover, the molecular weight of PAAm formed by the PNIPAAm induced polymerization of AAm was much higher than that of the polymer obtained by the radical polymerization using AIBN in THF or VA‐ 061 in water.     

Standard Enthalpies of Formation of β-Aminobutyric Acid and Products of Its Dissociation in Aqueous Solution

Russian Journal of Physical Chemistry A - Heats of dissolution of β-aminobutyric acid in water and aqueous solutions of potassium hydroxide at 298.15 K are measured via direct calorimetry....     

Synthesis and Characterization of N‐methylenephenyl Phosphonic Chitosan

Chitosan is a natural based polymer obtained by alkaline deacetylation of chitin, exhibiting excellent properties such as non‐toxicity, biocompatibility and biodegradability. N‐Methylenephenyl phosphonic chitosan (NMPPC) is synthesized from chitosan by reacting with phenyl phosphonic acid using formaldehyde. The NMPPC was characterized by FTIR, ³¹P‐NMR, X‐ray diffraction, scanning electron microscopy, thermogravimeteric analysis and solubility studies. A significant decrease of molecular weight was observed in the NMPPC. The TGA studies suggested that NMPPC has less thermal stability than chitosan. The X‐ray diffraction analysis showed that NMPPC was amorphous in nature. The solubility property of the polymer was improved after the incorporation of a phenyl phosphonic group.     

Synthesis,Characterization, Solution Stability Studies,Electrochemistry, and DNA‐Binding Behavior of Cu(II) Complexes of D‐Gluconic Acid

The chemistry of saccharides has emerged as a new subarea of pharmaceuticals. Condensation reactions of D‐gluconic acid with [M(en)₂]Cl₂/[M(ea)₂]Cl₂ where M=Cu, Ni, en=ethylenediamine, and ea=ethanolamine were carried out and a new series of chiral complexes have been isolated and characterized. Molar conductance measurements show that the complexes are ionic, and the spectral data are indicative of octahedral geometry of the complexes [Cu(D‐GlcCO₂H en*)₂ (H₂O)₂] · Cl₂ (1b), [Cu(D‐GlcCO₂H ea*) (H₂O)₂] · Cl₂ (3b) and [Ni(D‐GlcCO₂H ea*) (H₂O)₂] · Cl₂ (4), and the square planar geometry of complex [Ni(D‐GlcCO₂H en*)₂] · Cl₂ (2b). Polarimetric data along with CD spectra establish the chiral nature of complexes. Solution stabilities of these complexes were evaluated by cyclic voltammetric techniques as a function of pH. Electrochemical behavior of the complexes was studied in aqueous solution and showed an irreversible Cu^II/Cu^I couple. Kinetic studies of complex 1b and 3b with calf thymus DNA have been investigated spectrophotometrically under pseudo‐first order conditions, and k _obs values have been evaluated. Circular dichroism, cyclic voltammetry determinations, and viscosity measurements have also been carried out to authenticate the binding of DNA with metal complexes. Complexes 1b and 3b bind to DNA by covalent bond formation.     

Synthesis and Amphiphilic Behavior of N,N‐Bis‐glucosyl‐1,5‐benzodiazepin‐2,4‐dione

Abstract

Glucosyl‐1,5‐benzodiazepin‐2,4‐diones were synthesized in order to study the influence of the glucidic moiety on the amphiphilic behaviour. The glucosyl groups include 6‐deoxy‐D‐glucopyranos‐6‐yl and 6‐deoxy‐3‐O‐R‐D‐glucopyranos‐6‐yl (R = n ? C _n H _2n+1; n = 1, 8, 10 and 12). Variation in the length of the hydrocarbon chain allowed comparison of such amphiphilic data as water solubility (Sw) and surface tension (γ) values. At 25°C, the glucopyranosyl benzodiazepines with R = H and CH₃ show a higher water solubility than the starting 1,5‐benzodiazepin‐2,4‐diones. Some other glucidic benzodiazepine derivatives with an appropriate alkyl chain at C‐3 carbon of the D‐glucopyranose present a variable hydrosolubility and surface tension γ values close to 43 to 46 mN · m^?1 at the corresponding saturation. Moreover, according to preliminary tests, these compounds seem to show a better affinity for the blood brain barrier.     

Thermochemical Study of Acid—Base Reactions in a Glycyl-Tyrosine Aqueous Solution

Thermal effects of the interaction between a glycyl-tyrosine solution and solutions of HNO₃ and KOH in different pH ranges at a temperature of 298.15 K and ionic strengths of 0.25, 0.5, and 0.75 (KNO₃) are measured via calorimetry. Thermal effects of the stepwise dissociation of the dipeptide are determined. Standard thermodynamic characteristics Δ_rH°, Δ_rG°, and Δ_rS° of acid—base reactions in aqueous solutions of glycyl-tyrosine are calculated. The relationship between the thermodynamic characteristics of dipeptide dissociation and the structure of this compound is examined.     

Electrophoretic Mobilities of the Isotopes of Chloride and Bromide Ions in Aqueous Solution at 25 °C and Infinite Dilution

The electrophoretic mobilities of a few halide isotopes in aqueous solution have been evaluated at 25 °C and infinite dilution by analyzing a combination of data obtained by capillary electrophoresis (CE) and conductance data extracted from the literature. The effect of the temperature on the electrophoretic mobility has been thoroughly re-investigated to give the following temperature dependence for the chloride ion at 25 °C: 1.565%/ °C in 5×10⁻³ mol⋅L⁻¹ sodium chromate + 3×10⁻³ mol⋅L⁻¹ sodium borate buffer. The precise determination of the electrophoretic mobility of chloride and bromide ions, including the evaluation of their associated uncertainties, has been performed from conductance data spanning over 75 years. The electrophoretic mobilities are found to be −(79.124±0.020)×10⁻⁹ m²⋅V⁻¹⋅s⁻¹ for Cl⁻ and −(80.99±0.04)×10⁻⁹ m²⋅V⁻¹⋅s⁻¹ for Br⁻. Thanks to the precise determination of the temperature contribution and the re-evaluation of conductance data, the following values have been found for ³⁵Cl⁻, ³⁷Cl⁻, ⁷⁹Br⁻, and ⁸¹Br⁻ (in 10⁻⁹ m²⋅V⁻¹⋅s⁻¹): −(79.18±0.02), −(78.95±0.06), −(81.04±0.04), and −(80.94±0.04).     

Investigation of Water Uptake Behavior of Superabsorbent Polymers Composed of N‐Vinyl‐2‐pyrrolidone and Partially Neutralized Acrylic Acid

Fast‐swelling micrometer sized superabsorbents were synthesized through a rapid solution polymerization of n‐vinyl‐2‐pyrrolidone (NVP) and partially neutralized acrylic acid (PNAAc) under normal atmospheric conditions using N,N'‐methylene bisacrylamide (MB) as crosslinker and sodium bicarbonate as porogen. The effect of various parameters such as crosslinker concentration, degree of neutralization of monomer acid, concentration of initiator have been evaluated. Water retention capacity of superabsorbents under varying loads was also examined. The drying behavior of polymers at 37°C was also studied. The gels showed sharp volume transition in solutions of divalent metal ions. The superabsorbents were also characterized by FTIR and TGA.     

Thermochemical Study of the Reactions of Acid–Base Interaction in an Aqueous Solution of β-Aminobutyric Acid

Russian Journal of Physical Chemistry A - The enthalpies of interaction between β-aminobutyric acid and HNO3 and KОН solutions are measured calometrically in different pH ranges, a...     

γ-Radiation-Initiated Polymerization of Acrylonitrile in Aqueous Solution and in Emulsion

The γ-radiation-initiated polymerization of acrylonitrile (AN) at 25[ddot] C has been studied, both in aqueous solution and in emulsion, at dose rates between 70 and 175 krad/hr. The effect of added emulsifier, sodium lauryl sulfate (SLS), on reaction rates, R_p, and on polymer molecular weight, M_n, has been investigated. G (monomer polymerized) values ranged from 7,500 in aqueous solution to 20,000 in bulk to 45,000 in emulsion, all based on the total energy absorbed. In the aqueous solution polymerization, where R_p is approximately first order in initial monomer concentration over the range 0.15 ± [AN]_o ± 1.06 moles/liter, addition of SLS increases R_p but does not influence the order of the reaction with respect to [AN]_o. In the emulsion system at 70 krad/hr and at a phase volume ratio AN/H₂O of 1/2, (PR = 1/2), R_p varies as [SLS]^0.1 over the concentration range 0.01 ± [SLS] ± 2.5± wt/vol of aqueous phase. At the same PR value, and at 80 krad/hr, M_n of the polymer (measured by viscometry in dimethylformamide solution) is effectively independent of [SLS] in the range of 0.01 ± [SLS] ± 10± wt/vol of aqueous phase. Initial R_p values are either independent of PR in the range 1/3 ± PR ± 1/1 or exhibit an insensitive and unsystematic dependence thereon. Based on measurements at 70 and at 175 krad/hr, the intensity exponent of R_p at PR = 1/2 is approximately 0.4.     

Rapid and Catalyst‐Free α‐Halogenation of Ketones using N‐Halosuccinamides in DMSO

α‐Halogenation of various carbonyl compounds such as β‐keto‐esters, cyclic ketones, and lactams with N‐halosuccinamides (NBS, NCS, NIS) in the presence of DMSO proceeded very smoothly to give the corresponding α‐monohalogenated products in good to excellent yields with high selectivity under catalyst‐free conditions.     

A Comparative Study of Stabilities and Coordination Modes of β-Alaninephosphonic Acid in Copper(II) Heteroligand Complexes with Ethylenediamine, Diethylenetriamine or N,N,N′,N′,N″-Pentamethyldiethylene Triamine in Aqueous Solution

Solution equilibrium studies on Cu²⁺?CL₁?CL₂ ternary systems have been performed by pH-potentiometry, UV?CVis spectrophotometry and EPR methods {where L₁ corresponds to a polyamine such as ethylenediamine (en), diethylenetriamine (dien), N,N,N??,N??,N??-pentamethyldiethylenetriamine (Me₅dien)} and L₂ denotes 2-aminoethylphosphonic acid (??-alaninephosphonic acid)}. The results suggest the formation of heteroligand complexes with [Cu(L₁)(??-Ala(P))] stoichiometry in all of the studied systems. Additionally, in the system with en, [Cu(en)(??-Ala(P))H_?1]^? is formed in basic solutions. Our spectroscopic results indicate tetragonal geometry for the [Cu(en)(??-Ala(P))] species, a geometry slightly deviated from square pyramidal for the [Cu(dien)(??-Ala(P))] complex, and somewhat stronger geometry distortion was present for the [Cu(Me₅dien)(??-Ala(P))] complex. The coordination modes in these heteroligand complexes are discussed.     

Partial Molar Volume,Ionization, Viscosity and Structure of Glycine Betaine in Aqueous Solutions

Densities, partial molar volumes, and viscosities of aqueous solutions of betaine have been measured at 5, 10, 15, 20, 25, 30, 37, and 45 °C over the concentration range 0.05 to 5.0 mol⋅L⁻¹. The partial molar volumes show that betaine exists partly as a monohydrate and partly in its anhydrous form. The proportion of the anhydrous form increases with increasing temperature. Also, an associated form of betaine appears in concentrated betaine solutions, possibly with water as a bridging group. The significance of the viscosity B-coefficient is discussed. The signs of B _st, the increment of the viscosity B-coefficients arising from structural changes of water, are negative and the signs of dB/dT, the temperature derivative of B, are positive. These results show that betaine is a water structure breaker especially at lower temperatures, and this effect decreases to insignificance at higher temperatures. The ionization equilibria of betaine were investigated in aqueous 0.5 mol⋅L⁻¹ and 1.0 mol⋅L⁻¹ NaNO₃ at 5, 15, 25, and 37 °C by a potentiometric method. Using the least-square computer program SUPERQUAD, the complex forms are deduced to be betanium BH, bis(betanium) BHB, and bis(betaine) B₂ or bis(betaine)hydrate BH₂OB.     

Simple and Convenient One‐Pot Synthesis of Benzimidazoles and Benzoxazoles using N,N‐Dimethylchlorosulfitemethaniminium Chloride as Condensing Agent

N,N‐Dimethylchlorosulfitemethaniminium chloride (SOCl₂‐DMF) has been found to be an efficient reagent for the one‐pot synthesis of benzimidazoles and benzoxazoles in excellent yield by condensation of carboxylic acids with o‐phenylenediamine/2‐amino‐phenol.     

Adsorption and Aggregation Behavior in Aqueous Solution of Tetrasiloxane-based Carboxylate Surfactants via “Thiol-ene” Photochemical Reaction

Anionic silicone surfactants have long been a neglected field. In this paper three anionic silicone surfactants were synthesized first time from dichloromethylvinylsilane through hydrolysis-condensation, “thiol-ene” photo- chemical and then salting reaction. The critical aggregate concentration (CAC), surface tension, minimum surface area per surfactant molecule and surface pressure at CAC were studied by both surface tension and electrical conductivity. The results showed that they had significant surface activity at the gas/liquid interface and were capable to reduce the surface tension of water to approximately 20 mN m⁻¹. The results of transmission electron microscopy showed that the three silicone surfactants self-assembled into spherical aggregates of uniform size in aqueous solution above the CAC. The dynamic light scattering results demonstrated that the size of the aggregates was determined to be in the range from 60 to 300 nm at 0.05 mol L⁻¹ and the order of the size of the aggregates is (Me₃SiO)₃SiCO₂Li<(Me₃SiO)₃SiCO₂Na<(Me₃SiO)₃SiCO₂K.     

Removal of Disperse Dyes from Aqueous Solution Using Sawdust and BDTDA‐Sawdust

The adsorption of two disperse dyes, disperse blue 56 and disperse red from aqueous solution onto sawdust (SD) and benzyldimethyltetradecyl ammonium (BDTDA) treated sawdust has been studied. The effect of initial concentration of dyes, pH, and contact time has been studied. The pH had a considerable influence on adsorption and optimum pH for adsorption of disperse dyes is found to be in the range of 2–3. The experimental data were analyzed using Langmuir and Freundlich adsorption isotherm equations. The experimental data were fitted well to pseudo first order kinetic model with R²>0.99. The results indicate that sawdust modified with surfactant can be employed as a low cost alternative to commercial activated carbon for the removal of disperse dyes.