微米级单分散共聚物微球的制备

用分散聚合法制备了苯乙烯 甲基丙烯酸甲酯微米级单分散共聚物微球 ,粒径为 5 4 μm .将分散聚合体系与乳液聚合体系进行了比较 ,并对共聚物微球的形貌、粒径分布及共聚情况进行了表征研究 .     

苯乙烯/二乙烯基苯在乙醇/乙二醇单甲醚中分散共聚合速率及粒子大小的研究

以乙醇 乙二醇单甲醚 (EOH EGME)为介质 ,羟丙基纤维素 (HPC)为稳定剂 ,偶氮二异丁腈 (AIBN)为引发剂进行了苯乙烯和二乙烯基苯的分散共聚合研究 .制得粒径在 6～ 10 μm范围内的单分散交联聚苯乙烯微球 (CPS) .探讨了不同介质配比 ,以及苯乙烯、二乙烯基苯、引发剂的浓度对微球大小、粒径分布、聚合速率及稳定性的影响 .当苯乙烯和AIBN浓度增加时 ,聚合速率和平均粒子尺寸增加 ,而粒子分布变宽 ,粒子数先增加 ,而后降低 .随着EOH EGME比例的增加 ,平均粒子尺寸增加 ,而分布指数降低 ,稳定剂增加 ,粒子尺寸降低和粒子数增加 ,但对聚合速率及粒子分布影响不太明显 .另外还探讨了单体和交联剂的后滴加法对微球大小、粒径分布的影响     

Precipitation polymerization in acetonitrile and 1‐propanol mixture: synthesis of monodisperse poly(styrene‐co‐divinylbenzene) microspheres with clean and smooth surface

Precipitation polymerization of styrene (St)–divinylbenzene (DVB) has been carried out using acetonitrile/1‐propanol mixture as the reaction media and 2,2′‐azobisisobutyronitrile (AIBN) as initiator. Monodisperse micron‐sized poly(St‐co‐DVB) microspheres with clean and smooth surface were synthesized in the absence of any stabilizing agent such as surfactants or steric stabilizers. The effects of various polymerization parameters such as 1‐propanol fraction in the reaction media, initiator and total monomer concentration, DVB content, polymerization time and polymerization temperature on the morphology, particle size and size distribution were investigated. It was found that smoothly shaped stable particles were obtained when less than 70 vol% of 1‐propanol was used in the media. The particle size increased with the AIBN concentration, whereas the change of uniformity was less obvious. Monodisperse microspheres were obtained when the total monomers loading ranged from 0.5 to 3 vol%. The particle diameter ranged from 2.73 to 1.87 µm with an increasing DVB content and the uniformity was enhanced. In addition, the yield of microspheres increased with the increasing total monomer, initiator, and DVB concentration and polymerization time. Copyright © 2010 John Wiley & Sons, Ltd.     

Preparation of monodisperse polystyrene microspheres: effect of reaction parameters on particle formation,and optical performances of its diffusive agent application

There are three monodisperse polystyrene (PSt) microspheres, 1.10, 3.13, and 5.21 um in diameter were prepared by dispersion polymerization in ethanol/iso-propanol media. 2,2′-azobis(isobutyronitrile) (AIBN) and poly(acrylic acid) (PAA) were utilized as initiator and steric stabilizer, respectively. The effects of the PAA stabilizer, AIBN initiator, St monomer, and EtOH solvent on particle size and size distribution were reviewed in this article. Besides, optical properties including total transmittance (T%) and transmittance haze (H%) were performed when these three monodisperse PSt microspheres were applied as diffusive agents. The results were examined in terms of total interface area in a system, and came up an optimal situation between transmittance haze (H _max% = 65%) and T% when total surface area of particles is around 45,000 cm².     

Preparation of Monodisperse Cationic Microspheres by Dispersion Polymerization of Styrene and a Cation-Charged Monomer in the Absence of a Stabilizer

Cationic polystyrene (PS) microspheres with monodispersity were prepared by dispersion polymerization of styrene and [2-(methacyrloyloxy) ethyl] trimethylammonium chloride (METMAC) in methanol/water system. The effects of METMAC, styrene, and initiator concentration as well as solvent composition on the diameters and size distribution of PS microspheres were systematically investigated. The results indicated that monodisperse cationic PS microspheres could be generated at METMAC concentration less than 2 mol% relative to styrene amount, and too high or low styrene amount was unfavorable to produce cationic PS microspheres. Moreover, it was found that with initiator concentration increasing, the average diameter and the size distribution of cationic PS microspheres also markedly increased. Solvent composition played a significantly important role in the preparation of cationic PS microspheres by dispersion polymerization of styrene and METMAC. Finally, the possible growth and stabilization mechanism of cationic PS microspheres was proposed. The electrostatic repulsion derived from positive charge on the surface of PS microspheres was responsible for the stabilization during dispersion polymerization in the absence of a stabilizer.     

PSt种子与“花瓣”形PSt/PAN复合颗粒的制备

以过硫酸钾为引发剂,在乙醇/水的混合介质中使苯乙烯进行无皂乳液聚合,得到了单分散亚微米级聚苯乙烯(PSt)微球.用扫描电子显微镜研究了引发剂浓度、单体浓度、反应温度和溶剂组成对PSt微球粒径的影响.结果表明,改变上述条件能明显影响其粒径.以所得单分散聚苯乙烯微球为种子,在丙烯酸单封端聚乙二醇大分子单体存在的条件下,使丙烯腈和少量苯乙烯进行新的无皂种子乳液聚合,在合适的条件下制得到了“花瓣”形的聚合物复合颗粒,为深入探讨这类特殊形态聚合物颗粒的形成机理提供了新的佐证.     

Preparation and control of surface properties of monodisperse micrometer size beads by dispersion copolymerization of styrene and butyl methacrylate in polar media

The dispersion copolymerization of styrene and butyl methacrylate in ethanol-water medium to afford micrometer-size monodisperse beads has been investigated. Hydroxypropyl cel-lulose, poly (acrylic acid), and poly (vinylpyrrolidone) have been used as steric stabilizers, benzoyl peroxide and azobisisobutyronitrile as initiators. A novel steric stabilizing system consisting of a mixture of poly (acrylic acid) and hydroxypropyl cellulose has also been shown to lead to monodisperse beads for which the surface charge can be controlled by the relative ratio of steric stabilizers. The effect of several variables, such as the solvency of the medium, the concentration of co-monomers, the reaction temperature, and the type of steric stabilizer and initiator used on the bead size and size distribution are discussed. © 1995 John Wiley & Sons, Inc.     

Effect of reaction parameters on the dispersion polymerization of 1‐vinyl‐2‐pyrrolidone

Nonporous hydrogel microspheres 0.1–1.3 μm in diameter were prepared by the dispersion copolymerization of 1‐vinyl‐2‐pyrrolidone and ethylene dimethacrylate as a crosslinking agent. The crosslinking was evidenced by solid state ¹³C NMR and elemental analysis. The effect of various parameters including selection of solvent (cyclohexane, butyl acetate), initiator (4,4′‐azobis(4‐cyanopentanoic acid), 2,2′‐azobisisobutyronitrile, dibenzoyl peroxide) and stabilizer on the properties of resulting microspheres has been studied. Dynamic light scattering and photographic examination were used for determination of the diameter and polydispersity of microspheres. Increasing concentration of steric stabilizer in the initial polymerization mixture decreased the particle size. The particle size depended on the molecular weight of polystyrene‐block‐hydrogenated polyisoprene stabilizer, but not on the number of PS and polybutadiene blocks in the styrene–butadiene block copolymer stabilizers. Dibenzoyl peroxide used as an initiator resulted in agglomeration of particles. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 653–663, 2000     

聚二乙烯基苯微球的合成及其表征研究

采用分散聚合方法制备了聚二乙烯基苯微球 ,研究了引发剂、稳定剂、单体 溶剂比例和溶剂种类对微球粒径及其分布的影响 ,在适当的条件下可以得到平均粒径较大、粒径分布较窄的微球 .用红外光谱法研究了聚合物微球内稳定剂、悬挂双键以及对位和间位二乙烯基苯含量随聚合过程的进行发生的变化 .测得的微球TG曲线表明 ,聚合物微球具有良好的热稳定性 .     

Synthesis of monodisperse poly(divinylbenzene) microspheres

Highly crosslinked monodisperse poly(divinylbenzene) microspheres were produced by precipitation polymerization with acetonitrile as solvent. The radical initiators AIBN, BPO, and ADVN were used. The process does not require stabilizers of any type, and produces monodisperse particles with diameters between 2 and 5 μm, depending on the conditions. These microspheres do not swell or dissolve in any common solvent, and have clean, stabilizer-free surfaces. The particle formation and growth mechanism is proposed to resemble that of dispersion polymerization, except that the particles are stabilized against coagulation by their rigid, crosslinked surfaces rather than by added stabilizers. Spherical particles were formed only at effective crosslinker/monomer or divinyl/monovinyl ratios larger than 1 : 2. © 1993 John Wiley & Sons, Inc.     

蒸馏沉淀聚合过程中交联度对单分散聚合物微球形成的影响书

以苯乙烯为单体、二乙烯基苯（DVB）为交联剂，过氧化二苯甲酰（BPO）为引发剂研究了蒸馏沉淀聚合法制备聚合物微球过程中交联单体二乙烯苯的用量对单分散聚合物微球成球的影响。结果表明，增加二乙烯基苯的比例，即提高交联度有利于形成单分散的聚合物微球。     

Preparation of monodisperse functional poly(styrene-co-acrylamidoxime) microsphere with chelating amidoxime group

Monodisperse poly(styrene-co-acrylonitrile) microspheres were prepared by dispersion copolymerization of styrene (St) and acrylonitrile (AN) in ethanol (EtOH)/isopropanol medium. 2,2′-Azobis(isobutyronitrile) (AIBN) and poly(acrylic acid) (PAA) were utilized as initiator and steric stabilizer, respectively. The effects of PAA stabilizer, AIBN initiator, St/AN monomer ratio, and EtOH solvent on particle size and size distribution were investigated systematically. AN is a co-monomer with desired nitrile group (–CN); the functional P(St-co-acrylamidoxime) microsphere with chelating amidoxime group (–C(NH₂)=NOH) was derived by amidoximizing the nitrile group with hydroxylamine. The percentage of chemical modification was calculated to be 51.2% in this study.     

分散共聚法制备窄分布P(St-co-nBA)微球

用分散共聚法制得窄分布苯乙烯(St)和丙烯酸正丁酯(nBA)的共聚物微球.采用1H-NMR、DSC、FTIR、SEM、LS等对共聚物的结构、形态、性能进行表征,考察了初始单体配比、温度、稳定剂浓度、分散介质极性、引发剂对微球粒径、粒径分布及转化率的影响.实验结果表明,初始单体比nBA/St增大,微球粒径增大,分布变宽,...     

Preparation of monodisperse poly(St‐co‐PETEA) microspheres by precipitation polymerization using ethanol as solvent

Precipitation polymerization of styrene (St) was carried out with pentaerythritol tetraacrylate (PETEA) to produce monodisperse crosslinked microspheres. A much safer ethanol replaced acetonitrile as a solvent in precipitation polymerization of monodisperse crosslinked poly(St‐co‐PETEA) microspheres. Monodisperse crosslinked microspheres with high monomer conversion were achieved within 4 hr. Uniform and well‐separated monodisperse were obtained in ethanol when PETEA concentration varied from 30 vol% to 90 vol% and the particle diameter decreased from 0.75 to 0.58 µm. The particle yield increased from 36.51 to 64.38% by increase in the initiator loading from 1 to 8 wt%. No coagulum occurred between particles when the polymerization time varied from 2 to 10 hr. Copyright © 2010 John Wiley & Sons, Ltd.     

Monodisperse polystyrene microspheres prepared by dispersion polymerization with microwave irradiation

Monodisperse polystyrene microspheres with diameters of 200–500 nm were prepared by dispersion polymerization with microwave irradiation with poly(N‐vinylpyrrolidone) as a steric stabilizer and 2,2′‐azobisisobutyronitrile as a radical initiator in an ethanol/water medium. The morphology, size, and size distribution of the polystyrene microspheres were characterized with transmission electron microscopy and photon correlation spectroscopy, and the formed films of the polystyrene dispersions were characterized with atomic force microscopy. The effects of the monomer concentration, stabilizer concentration, and initiator concentration on the size and size distribution of the polystyrene microspheres were investigated. The polystyrene microspheres prepared by dispersion polymerization with microwave irradiation were smaller, more uniform, and steadier than those obtained with conventional heating. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2368‐2376, 2005     

分散聚合与水热处理相结合制备单分散聚苯乙烯微球的研究

将分散聚合与水热处理相结合,以聚乙烯醇为稳定剂,以乙醇和水为分散介质,三羟甲基丙烷三丙烯酸酯为交联剂,一步法成功制备得到不同粒径的单分散交联聚苯乙烯微球.以乙醇/水的比例为50/50的反应体系为基础,研究了聚乙烯醇类型和含量,有机相含量,引发剂浓度,以及水热釜填充量等对所制备的微球形貌的影响,发现聚乙烯醇类稳定剂的分子量的降低和含量的增多倾向于生成黏连的微球;在有交联剂的条件下,不含稳定剂的体系仍能够得到单分散的交联PS微球;有机相含量的增加会导致微球呈现多分散性;而体系中引发剂的含量和反应液在水热釜中的填充量对微球的形貌影响不大.进一步针对水热法的特点分析探讨了一步法成功制备单分散的交联聚苯乙烯微球的原因及其机理.     

Synthesis of monodisperse polystyrene microspheres by dispersion polymerization using sodium polyaspartate

We prepared monodisperse polystyrene microspheres by dispersion polymerization using sodium polyaspartate (PAspNa) as a dispersion stabilizer in an ethanol/water medium. The influence of reaction parameters, i.e., the volume fraction of ethanol in the medium, stabilizer concentration, and the monomer concentration, on the average diameter of the prepared polystyrene microspheres and its distribution were investigated. Polystyrene microspheres were successfully prepared, and the average diameter of the prepared monodisperse polystyrene microspheres was controlled by adjusting the reaction parameters. The zeta potential of the microspheres and the time course of conversion, the particle diameter and its distribution, and particle numbers were also examined. It was found that PAspNa as a dispersion stabilizer provides an environmentally benign process for the preparation of monodisperse polymer microspheres by dispersion polymerization.     

Controllable Preparation of Monodisperse Polystyrene Microspheres with Different Sizes by Dispersion Polymerization

Summary: Monodisperse polystyrene (PS) microspheres with different sizes were prepared by dispersion polymerization in dispersion media of ethanol/water and isopropayl alcohol/water, respectively. The effect of polarity of the dispersion medium, stabilizer and initiator concentration on the average sizes and size range were evaluated. The results show that monodisperse PS microspheres with different sizes could be prepared in dispersion media of ethanol and isopropyl alcohol/water when appropriate initiator and stabilizer concentrations were employed, and the latter is a more appropriate medium to prepare uniform PS microspheres. It was found that the microsphere sizes reduced with increasing water content in the dispersion medium. Furthermore, in isopropyl alcohol/water dispersions, the average sizes decreased with increasing stabilizer concentration.     

Preparation of P4VP-g-PSt Copolymer Microspheres with Controllable Size by Atom Transfer Radical Polymerization Synthesized Poly(4-vinylpyridine) Macromonomer

Poly(4‐vinylpyridine) macromonomer (St‐P4VP) with a styryl end group was synthesized by atom transfer radical polymerization (ATRP) of 4‐vinylpyridine using p‐(chloromethyl)styrene (CMSt) as functional initiator, CuCl as catalyst and tris[2‐(dimethylamino)ethyl]amine (Me₆TREN) as ligand in 2‐propanol. The structure of St‐P4VP macromonomer was identified by proton nuclear magnetic resonance (¹H NMR). The result of gel permeation chromatography (GPC) illustrated that the number‐average molecular weight of St‐P4VP could be controlled by adjusting polymerization conditions. Poly(4‐vinylpyridine) grafted polystyrene microspheres (P4VP‐g‐PSt) were then prepared by dispersion copolymerization of styrene with St‐P4VP macromonomers. The effects of polymerization reaction parameters such as medium polarity, concentration of St‐P4VP macromonomer and polymerization temperature on the sizes and size distribution of P4VP‐g‐PSt microspheres were investigated. The results of transmission electron microscopy (TEM), scanning electron microscopy (SEM) and laser light scattering (LLS) indicated that mono‐dispersed P4VP‐g‐PSt microspheres with average diameters of 100–200 nm could be obtained when the molar ratio of St to St‐P4VP was 0.25:100 in ethanol/water mixed solvents (V/V=80:20) at 60°C. Such kind of graft copolymer microspheres was expected to be applied to many fields such as drug delivery system and protein adsorption/separation system due to their particular structure.     

乙酸乙酯/乙醇混合溶液中分散聚合制备单分散亚微米级聚丙烯酰胺微球

以乙酸乙酯/乙醇混合溶液为分散介质, PVP为分散剂, 通过分散聚合法合成了单分散亚微米级PAM微球. 在反应初期, 自动加速现象明显. 由于凝胶效应的影响, 分子量随着单体转化率的提高而逐渐增大. 考察了分散剂浓度对最终产物增率的影响, 并用IR光谱对产物的结构进行了表征, 证明分散聚合体系中吸附稳定机理和接枝稳定机理同时存在, 且以后者为主. 同时还研究了混合溶剂比例、分散剂浓度、初始单体浓度和引发剂浓度对微球粒径及粒径分布的影响. 结果表明, 乙酸乙酯/乙醇体积比在5∶5-7∶3范围内, 可得到粒径在200 nm左右, 且分布较窄的PAM微球; 分散剂浓度增大, 粒径减小; 引发剂浓度增加, 粒径增大; 初始单体浓度较高或较低时, 都得不到单分散性微球.