Selective Transport of Alkali—Metal Cations through Liquid Membranes by Non—Cyclic Carriers

The emission spectra of a series of naphthalene end-labeled oligo-oxyethylene(N-Pn-N) and their facilitated transport of cations across liquid membranes have been investigated.Alkali-metal cations enhance or inhibit the intramolecular excimer formation of N-Pn-N remarkably,suggesting that the polyether chain of N-Pn-N in solution complexes with the cations,and the orientation of the terminal chromophores depends on the cation size and the length of the polyether chain. These compounds are able to act as carriers to facilitate transport of alkali-metal cations through organic liquid membranes.The transport efficiencies are comparable with those of cyclic carriers such as crown ethers,and show remarkable selectivity.     

Ionic‐Liquid‐Supported Total Synthesis of Sansalvamide A Peptide

A facile and efficient total synthesis of bioactive sansalvamide A peptide has been accomplished, including the‐ionic‐liquid supported method and final PyBOP‐promoted ring closure.     

Cross‐linked Copolyimide Membranes for the Separation of Gaseous and Liquid Mixtures

Cross‐linked polymer structures gain increasing attention as membrane materials because they can fullfill the demands for industrial applications. Thereby, not only good separation characteristics but also high temperature stability and chemical resistancy are required. Furthermore, it is important that the membrane materials be plasticization resistant, because it is found that this causes strong increasing permeability with a drastic loss in selectivity. Plasticization effects occur with polyimide membranes in the presence of high CO₂concentrations, hydrocarbons as propylene, propane, or aromatics. Unfortunately, these components are present in mixtures with high relevance being separated economically by membrane units or hybrid processes. In this article, the advantages of cross‐linked 6FDA (4,4′hexafluoro isopropylidene diphthalic acid anhydride)‐copolyimides are discussed based on experimental results for the separation of propylene/propane, benzene/cyclohexane, and high‐pressure CO₂/CH₄mixtures. Additionally, opportunities for implementing the membrane units in conventional separation processes are discussed.     

Zeolite H‐Y–Supported Copper(II) Nitrate: A Simple and Effective Solid‐Supported Reagent for Nitration of Phenols and Their Derivatives

Highly regiospecific mononitration of phenols and substituted phenols is accomplished by employing copper(II) nitrate supported on a catalytic amount of zeolite H‐Y in a solid state.     

Liquid‐Phase Synthesis of Methyl (E)‐2‐Nitromethyl‐2‐alkenoates Based on PEG‐Supported α‐Phenylselenopropionate

The reaction of the lithio derivative of novel polyethylene glycol (PEG)‐supported α‐phenylselenopropionate with aldehydes, followed by oxidation–elimination with 30% hydrogen peroxide and then treatment with sodium nitrite, formed PEG‐bound 2‐nitromethyl‐2‐alkenoates. Subsequent cleavage from the PEG efficiently afforded methyl (E)‐2‐nitromethyl‐2‐alkenoates in good yields and high purities.     

Liquid chromatographic analysis of Hg(II) binding by thiol-rich peptides using both UV–vis and electrochemical detection

An existing method for HPLC determination of thiol-containing peptides has been successfully adapted to the analysis of mixtures of glutathione (GSH) and some related peptides with their Hg(II) complexes as a first approach to the study of phytochelatin extracts. The separation was achieved in a C18 column with a mobile phase of 0.1% trifluoroacetic acid (TFA) and 0.1% TFA/acetonitrile. Non-derivative UV–vis detection at 202 nm used in the original method has been complemented with amperometric detection at 1.2 V on glassy carbon electrode. Two different Hg(II)–GSH complexes were observed by both detection modes and confirmed by mass spectrometry.     

Nonextractive Trace Level Simultaneous Determination of Mercury(II) and Zinc(II) in Environmental Samples with 2‐(5‐Bromo‐2‐pyridylazo)‐5‐diethylaminophenol and Cetylpyridinium Chloride

Abstract

A simple, rapid, selective, and sensitive method for the derivative spectrophotometric determination of Hg(II) and its simultaneous determination in the presence of Zn(II) using 2‐(5‐bromo‐2‐pyridylazo)‐5‐diethylaminophenol in the presence of cetylpyridinium chloride, a cationic surfactant, has been developed. The molar absorption coefficient and analytical sensitivity of the 1∶1 Hg(II) complex at 558 nm (λ_max) are 5.78×10⁴ L mol^?1 cm^?1 and 0.67 ng mL^?1, respectively. The detection limit of Hg(II) is 1.40×10^?2 ng mL^?1, and Beer's law is valid in the concentration range 0.05–2.40 µg mL^?1. Overlapping spectral profiles of Hg(II) and Zn(II) complexes in zero‐order mode interfere in their simultaneous determination. However, 0.10–2.00 µg mL^?1 of Hg(II) and 0.065–0.650 µg mL^?1 of Zn(II), when present together, can be simultaneously determined at zero cross point of the derivative spectrum, without any prior separation. The relative standard deviation for six replicate measurements of solutions containing 0.134 µg mL^?1 of Hg(II) and 0.620 µg mL^?1 of Zn(II) is 1.72 and 1.47%, respectively. The proposed method has successfully been evaluated for trace level simultaneous determination of Hg(II) and Zn(II) in environmental samples.     

Biomimetic Synthesis of CdSe Quantum Dots through Emulsion Liquid Membrane System of Gas-Liquid Transport

The cadmium selenide quantum dots (QD) have been synthesized by template-control in an emulsion fiquid membrane system. The system consisted of kerosene as solvent, L152 (dialkylene succinimide) as surfactant,N7301 (trialiphatic amine, R3N, R=C8-C10) as carrier, 0.1mol/L CdCl2 solution as internal-aqueous phase and H2Se gas as external phase. Additive organic template agent in internal-aqueous phase was necessary to form CdSe QD. The influence of the nature of template and its concentration on sizes of the formed CdSe QD has also been studied. Transmission electron microscopy showed that the sizes of the products could be controlled down to 3-4nm. X-ray diffraction analysis revealed that the crystals had cubic structure. The formation process and the optical properties of CdSe QD have also been presented.     

Assembling Synthesis of ZnSe Orthohexagonal Slices through Emulsion Liquid Membrane System of Gas-liquid Transport

Orthohexagonal slices assembled by ZnSe quantum dots were synthesized through emulsion liquid membrane system. These orthohexagonal slices were 1.5-3.5 μm in side length and were self-assembled by ZnSe quantum dots of 2-3 nm. It was proposed the surfactant molecules on ZnSe quantum dots played a key role in the self-assembly process.     

Characterization and spectroscopic study of new complexes of Cd(II), Hg(II) and Pb(II) with the sodium salt of morin-5′-sulfonic acid

Solid compounds of Cd(II), Hg(II) and Pb(II) with the sodium salt of morin-5′-sulfonic acid (NaMSA) were obtained. The molecular formula of the complexes are: Cd(C₁₅H₈O₁₀SNa)₂?·?6H₂O, CdOH(C₁₅H₈O₁₀SNa)?·?4H₂O, Hg(C₁₅H₈O₁₀S)?·?4H₂O and Pb(C₁₅H₈O₁₀S)?·?3H₂O. Some of their physicochemical properties such as UV-Vis, infrared, ¹³C NMR and mass spectra, thermogravimetric analysis, and solubility were studied. On the basis of spectroscopic data NaMSA was bound to Cd²⁺ via 4C=O and 3C?–?oxygen and the Hg²⁺ and Pb²⁺ ions by 5C–OH, 4C=O and 3C–OH.     

Ionic Liquid–Liquid Extraction and Supported Liquid Membrane Analysis of Lipophilic Wood Extractives from Dissolving-Grade Pulp

In this study, the extraction of lipophilic wood extractives from dissolving pulp samples using ionic liquid–liquid extraction and a two phase hollow fibre supported liquid membrane was investigated. Ionic liquids are capable of dissolving a range of organic and polymeric compounds and are biodegradable, with a negligible vapour pressure. Pulp samples were dissolved in a suitable amount of molten 1-butyl-3-methylimidazolium chloride to give 5 % cellulose solution. Pure cellulose was regenerated by adding water and filtered off. The ionic liquid-aqueous filtrate was first extracted for lipophilic extractives using liquid–liquid extraction. Then, a two phase hollow fibre supported liquid membrane extraction of lipophilic extractives was performed to extract the derivatized compounds prior to analysis by gas chromatography mass spectrometry. The operational parameters of this sample preparation approach were optimised using sterols and fatty acid methyl esters. The variation of enrichment factors and extraction efficiency with respect to liquid membrane, extraction time, stirring speed and sample pH were observed and used to get the optimal parameters. The approach was used in the analysis of oxygen bleached dissolving pulp samples in which main compounds identified were fatty acids, sterols, fatty alcohols, steroid hydrocarbons and ketones. These compounds were similar to those obtained using molecular solvent extraction method, which indicated the absence of chemical reaction between extractives and ionic liquid used.

     

N‐Arylation of Heterocycles with Chloro‐ and Fluoroarenes using Resin‐Supported Sulfonato‐Cu(salen) Complex

Sulfonato‐Cu(salen) complex immobilized onto a Merrifield's resin was found to be an efficient catalyst for the N‐arylation of heterocycles with electron‐withdrawing hloro‐ and fluoroarenes. The reactions were carried out in the presence of an inexpensive mild base, K₂CO₃, and N‐arylated compounds were obtained in good to excellent yields. The catalyst was recovered by simple filtration and reused for three cycles with almost consistent activity.     

Synthesis,Electrical, Electronic and Charge Transport Properties of Poly(aniline‐co‐p‐toluidine)

Copolymers of aniline with p‐toluidine were synthesized for different molar ratios of the respective monomers in acid medium. The electrical conductivity, charge transport and spectral characteristics upon incorporation of p‐toluidine units into the polyaniline backbone were investigated. The electrical conductivity of the copolymers showed frequency dependence which became more prominent with an increase in the number of p‐toluidine units in the polyaniline backbone. A direct relationship between the frequency dependence and electron localization was observed in the copolymers. Electronic spectra showed blue shifts in the π→π*and benzenoid→quinoid transitions revealing a decrease in the extent of conjugation in the copolymers. The protonated forms of the copolymers were soluble in DMSO giving polaron band around 400 nm. The decrease in electrical conductivity was attributed to the greater electron localizations as revealed from the broader ESR signals. Temperature dependence of electrical conductivity showed that charge transport was mainly through variable range hopping though a mixed conduction behavior was observed at higher temperature range.     

Liquid–liquid extraction of Cu(II), Co(II) and Ni(II) with salicylidèneaniline from sulphate media

For a fundamental study on the development of novel extraction divalent metal, the extraction behaviour of copper(II), cobalt(II) and nickel(II) is studied with salicylidèneaniline (SAN). The phenol group in the Schiff base moiety leads to a large increase in the percentage of transition metal ions. SAN has both good reactivity towards metal ions and solubility in organic solvents. The solvent extraction of copper(II), cobalt(II) and nickel(II) with salicylidèneaniline from sulphate media is studied with the following parameters: pH, concentration of the extractant and the nature of diluent. The stoichiometry coefficients of the extracted species are determined by the slope analysis method. The extraction reaction proceeds by cation exchange mechanism and the extracted species are: CuL₂HL, CoL₂HL and NiL₂. The extaction constants are evaluated for the different diluents. Under suitable conditions of pH, the solvent extraction of cobalt(II) and nickel(II) in different diluents leads to third phase formation. This tendency is confirmed from numerical extraction constants for both metal cations (log?K _ex?=??15.10?±?0.03 for nickel(II) in CHCl₃) and (log?K _ex?=??12.56?±?0.04 for cobalt(II) in CHCl₃). The extraction efficiency is found to follow the order Cu(II)?>?Co(II)?>?Ni(II).     

Solid Supported Liquid–Liquid Extraction of Chemical Warfare Agents and Related Chemicals from Water

Solid-supported liquid–liquid extraction was optimized to extract the chemical warfare agents and their non-toxic analogues from water. The developed method was compared to the conventionally used liquid–liquid extraction. This method yielded high recoveries (70–80%) of non-toxic analogues of chemical warfare agents and good recoveries (65–75%) of the nerve agent sarin and Lewisite-III. The limits of detection of non-toxic analogues of CWAs, and toxic sarin and Lewisite-III, in selected ion monitoring and full scan mode, varied from 0.01 to 0.5 μg mL^?1 and 0.1 to 1.0 μg mL^?1 respectively.     

Ionic‐Liquid‐Influenced Expeditious and Stereoselective Synthesis of Olefins

1‐Butyl‐3‐methylimidazolium chloroaluminate, [bmim]Cl·.AlCl₃ (molar fraction, N=0.67), ionic liquid has been used in combination with metallic Zn for the reductive coupling of carbonyl compounds to synthesize symmetrical olefins, with the Z‐isomer formed predominantly. The ionic liquid played a dual role of Lewis acid catalyst and solvent.     

Silica‐Gel‐Supported Ceric Ammonium Nitrate (CAN): A Simple and Efficient Solid‐Supported Reagent for Oxidation of Oxygenated Aromatic Compounds to Quinones

A silica‐gel‐supported heterogeneous ceric ammonium nitrate (CAN) reagent has been developed for oxidizing oxygenated aromatics to quinones in nonaqueous media. The advantages of this procedure include excellent yields, mild reaction conditions, nonaqueous media, short reaction times, and easy product isolation.     

Superoxide‐Mediated Synthesis of N‐Aminoaziridines from N‐Aminoheterocycles and Olefins

Oxidation of 3‐amino‐2‐methyl‐4(3H)‐quinazolone and N‐aminophthalimide by superoxide ion generated in situ in the presence of olefinic substrates gives rise to the formation of N‐aminoaziridine derivatives.     

Ionic Liquid–Mediated Knoevenagel Condensation of Meldrum's Acid and Aldehydes

A simple, efficient, and green protocol for Knoevenagel condensation of Meldrum's acid and aldehydes in ionic liquid at room temperature without any catalyst is described. The reaction has been performed in different ionic liquids. The enhancement in the rate is observed in Brönsted acidic ionic liquid 1‐methylimidazolium trifluoroacetate [Hmim]Tfa, which furnishes quantitative yields with 4–30 min in most of the cases. Furthermore, ionic liquid is easily reused without any appreciable loss in activity.