Kinetic Study of Radical Polymerization VI. Copolymer Composition and Kinetic Parameters for Coplymerization of Styrene‐Itaconic Acid by On‐Line 1H‐NMR

Free radical solution copolymerization of styrene (St) and itaconic acid (IA) in dimethylsulfoxide‐d₆ (DMSO‐d₆) as the solvent and the use of 2,2′‐azobisisobutyronitrile (AIBN) as the initiator at 78°C was investigated by an on‐line ¹H‐NMR spectroscopy technique. Individual monomer conversion vs. reaction time, which was calculated from the ¹H‐NMR spectra data, was used to study the drift in monomer mixture composition vs. conversion. It was found that in general, both monomers were incorporated almost equally into the copolymer. However, when the mole fraction of IA was low, the tendency of IA toward incorporation into the copolymer chain was somewhat higher than St and by increasing the mole fraction of IA in the reaction mixture, the inverse tendency was observed. Overall monomer conversion as a function of time was calculated from individual monomer conversion data and used for the estimation of k_p /k_t ^0.5 for various monomer mixture compositions. This ratio was decreased with increasing the amount of IA in the initial feed, indicating a decrease in the rate of copolymerization. Changes in the copolymer composition vs. overall monomer conversion were investigated experimentally from the NMR spectra. This was in good agreement with the changes in monomer mixture composition vs. reaction progress. Plotting the copolymer composition vs. initial monomer feed showed tendency of the system toward alternating copolymerization.     

Kinetic Study of Radical Polymerization VIII. A Comprehensive Study of Solution Copolymerization of Vinyl Acetate and Methyl Acrylate by 1H‐NMR Spectroscopy

Radical copolymerization reaction of vinyl acetate (VA) and methyl acrylate (MA) was performed in a solution of benzene‐d₆ using benzoyl peroxide (BPO) as the initiator at 60°C. Kinetic studies of this copolymerization reaction were investigated by on‐line ¹H‐NMR spectroscopy. Individual monomer conversions vs. reaction time, which was followed by this technique, were used to calculate the overall monomer conversion, as well as the monomer mixture and the copolymer compositions as a function of time. Monomer reactivity ratios were calculated by various linear and nonlinear terminal models and also by simplified penultimate model with r _2(VA)=0 at low and medium/high conversions. Overall rate coefficient of copolymerization was calculated from the overall monomer conversion vs. time data and k _p  . k _t ^?0.5 was then estimated. It was observed that k _p  . k _t ^?0.5 increases with increasing the mole fraction of MA in the initial feed, indicating the increase in the polymerization rate with increasing MA concentration in the initial monomer mixture. The effect of mole fraction of MA in the initial monomer mixture on the drifts in the monomer mixture and copolymer compositions with reaction progress was also evaluated experimentally and theoretically.     

Donor-Acceptor Complexes in Copolymerization. XVI. NMR Analyses of Alternating and Random Copolymers of Styrene and α-Methylstyrene with Acrylonitrile and Methacrylonitrile

An NMR investigation was carried out on random and alternating copolymers of acrylonitrile (AN) with a-methylstyrene (MS) and methacrylonitrile (MAN) with α-methylstyrene and styrene (S). The alternating MS-AN copolymer, prepared by complexation with AlEti_1-5Cl_1-5, was found to have a predominantly coisotactic configuration which was attributed to the interaction between the CH₃ and CN groups. The cotacticity of the alternating copolymer was found to be independent of the temperature of polymerization and the amount of AlEt_1-5Cl_1-5 used for complexation. The NMR spectra of random MS-AN copolymers of varying compositions indicated a high value (0.85) for the coisotacticity probability parameter (σ). The equimolar random MS-AN copolymer was also found to have essentially alternating sequences which was attributed to their low reactivity ratios. The equimolar alternating MS-MAN copolymer was found to have a random stereochemical configuration in which the coisotactic placement was slightly preferrred over the cosyndiotactic placement. The NMR spectrum of the equimolar free radical initiated MS-MAN copolymer lacked the fine structure observed in the spectrum of the alternating copolymer which was attributed to the presence of other sequences. The equimolar alternating S-MAN copolymer was found to have a high coisotactic configuration similar to that observed in the MS-AN copolymer. The equimolar free radical initiated S-MAN copolymer had a random sequence distribution.     

Determination of Absolute Rate Constants for Radical Polymerization and Copolymerization of Ethyl α-Chloroacrylate: Effects of Substituents on Reaction Rates of Monomer and Polymer Radical

The propagation and termination rate constants (k_p and k_t) for the radical polymerization of ethyl a-chloroacrylate (ECA) were determined by the rotating sector method k_p = 1660 and k_t = 3.33 × 10⁸ L/mol?s at 30° C. The absolute rate constants for cross-propagations in copolymerization were evaluated from the k_p determined for ECA or those for common monomers and the monomer reactivity ratios. The reactivities of ECA and poly-(ECA) radicals estimated as the rate constants of cross-propagations were accounted for by using equations relating these rate constants to the polar and resonance effects of the substituents. ECA was highly reactive toward various polymer radicals as expected from the resonance effects of the carbethoxy and chloro substituents. The poly(ECA) radical was found to be more reactive than common polymer radicals. The reactivity of a polymer radical in cross-propagation seemed to increase with increasing electron-accepting power by facilitating electron transfer from a monomer required for the new C-C bond formation.     

Indirect Simultaneous Kinetic Determination of L‐Cysteine and Homocysteine by ANNs

Abstract

Simultaneous determination of cysteine and homocysteine in binary mixtures was performed by application of neural networks on the spectral kinetic data. This method is based on the complexation of bivalent iron with 2,2′–bipyridin (bipy). Iron(III) is quantitatively reduced to iron(II) with cysteine and homocysteine in the presence of 2,2′–bipyridin producing iron(II)–bipy complex (λmax=522 nm), and it can be used as a visible spectrophotometric signal for indirect simultaneous determination of the cysteine and homocysteine concentrations. On the basis of the difference in the rate between the two reactions, these two amino acids can be determined simultaneously using principal component‐artificial neural networks (PC‐ANN). The parameters controlling behavior of the system were investigated and optimum conditions selected. Determinations were made over the concentration range 0.10–5.50 µg · mL^?1 of cysteine and 0.1–5.00 µg · mL^?1 of homocysteine. Applying this method satisfactorily to simultaneous determination of these amino acids with total relative standard error less than 5% validated the proposed method.     

Radical Polymerization of N,N″-Methylenebisacrylamide by Peroxidiphosphate-Ag+ Redox System: A Kinetic Study

Abstract

The kinetics of aqueous polymerization of N,N′-methylenebisacrylamide (N,N′ -MBA) was studied under an inert atmosphere within the 20-40°C temperature range. The rate of polymerization was found to be proportional to N,N′ -MBA and square-root dependent to the concentration of Ag⁺ and peroxidiphosphate. An intramolecular cyclization prior to propagation is proposed in the mechanism to explain the kinetic data. The overall energy of activation has been found to be 30.2 ± 0.1 kJ · mol^?1. On the basis of experimental results, a suitable scheme has been proposed and a rate expression has been derived.     

Functional Monomers and Polymers. 165. Dehydrochlorination of Head‐to‐Tail 1,4‐rans‐Poly‐(‐1‐Chlorobutadiene) Prepared by Inclusion Polymerization in Deoxycholic Acid Canals

Thermal and chemical dehydrochlorination of head‐to‐tail 1,4‐trans‐poly(‐1‐chlorobutadiene) prepared by inclusion polymerization in deoxycholic acid canals resulted in formation of a trans‐polyacetylene‐type polymer. The dehydrochiorinated polymer was characterized by UV/VIS, IR, Raman, and ESR spectroscopy. The number of conjugated double bonds in the polymer was about 10–20. Doping with iodine was also studied.     

^1H NMR Study of Polyvinylalcohol Irradiated by Ultra-violet

The effect of Ultra-violet light on the structure and motion of the polyvinyl alcohol (PVA) chains was studied by IH NMR, spin-lattice relaxation and IR spectroscopy. The results indicated that with the increase of irradiation time, the intensity of the polymer hydroxyl proton peaks decreased and finally vanished, which suggested the self-condensation between the hydroxyl groups proceeded. No methyl proton peaks appeared in the spectra after irradiation shows that there is no cleavage of polymer chain. The longer the irradiation time is, the wider the proton peak of the residual water of the solvent is and it shifted toward low field. This result implies that the hydrogen bonds formed between the polymer and the residual water. The absorption peak of hydroxyl group of the polymer moves toward the lower wave number in the IR spectrum that showed the existence of the hydrogen bonds between the PVA macromolecules.     

Study on Synthesis of Star‐Shaped Poly(ethylene oxide) by Atom Transfer Radical Polymerization

Star‐shaped poly(ethylene oxide) (PEO) was prepared by atom transfer radical polymerization (ATRP) with a 2‐bromoisobutyryl PEO ester as a macroinitiator. Divinylbenzene (DVB) and ethylene glycol dimethacrylate were employed as the coupling reagents. Several factors pertinent to star polymer formation are: type of coupling reagents and solvents, feed ratio of DVB to the macroinitiator, and reaction time. These were studied and used to optimize the star formation process. The optimum yield of star polymer was ca. 90–98%.     

An NMR Study of the Equilibration of d‐Glucaric Acid with Lactone Forms in Aqueous Acid Solutions

The aqueous solution equilibration of d‐glucaric acid with its lactone forms was studied by NMR with and without acid catalysis. The kinetics of the approach to equilibrium were simulated, and approximate equilibrium and rate constants were obtained.     

An Approximate Kinetic Treatment of Slow‐Initiated Living Polymerization. I. First‐Order Initiation and Propagation

A new method for deriving the initiation rate constant for a slowinitiated living polymerization process in which all reactions are first order with respect to all participants is presented. The method is based upon an approximate analytical solution of the set of differential equations modeling this class of processes. The solution is found by asymptotic expansion of the unknown functions, using a dimensionless parameter which characterizes the process.     

Synthesis and Radical Polymerization of N‐[4‐N′‐(Phenylamino‐carbonyl)phenyl]maleimide and its Copolymerization with Methyl Methacrylate

A novel type of imide‐amide monomer, 4‐maleimidobenzanilide (MB) i.e., N‐[4‐N′‐(phenylaminocarbonyl)phenyl]maleimide was synthesized from maleic anhydride, p‐aminobenzoic acid and aniline. Radical polymerization of MB and its copolymerization with MMA (methyl methacrylate), initiated by AIBN, were performed in THF solvent at 65°C. Nine copolymer samples were prepared using different feed ratios of comonomers. All the polymer samples have been characterized by a solubility test, intrinsic viscosity measurements, FT‐IR and ¹H‐NMR spectral analysis, and thermo‐gravimetric analysis. The values of monomer reactivity ratios of MB‐MMA system (r₁, r₂) and the Alfrey‐Price parameters Q₁ and e₁ were determined.     

Redox Polymerization of Acrylonitrile: Kinetics of the Reaction Initiated by the Redox System 1-Propanol—Chromic Acid

The kinetics of the aqueous polymerization of acrylonitrile initiated by the chromic acid-1-propanol redox system was investigated under a nitrogen atmosphere. The rates of polymerization and the disappearance of Cr(VI) were measured. Chromic acid alone did not initiate the polymerization under deaerated and undeaerated conditions. Water-miscible organic solvents and neutral salts depress both the rate and the conversion. On the basis of the experimental observations of the dependence of the rate of polymerization R_p and the rate of disappearance of Cr(VI)-R_m on various variables, a suitable kinetic scheme was proposed and various rate and energy parameters evaluated.     

RAFT Polymerization of Styrene in the Presence of 2‐Nonyl‐benzoimidazole‐1‐carbodithioic Acid Benzyl Ester

A novel dithiocarbamate, 2‐nonyl‐benzoimidazole‐1‐carbodithioic acid benzyl ester ( 1a ), was synthesized and successfully used in RAFT polymerization of styrene in bulk with thermal initiation. The effect of molar ratio of styrene to RAFT agent on the polymerization was investigated. The linear relationship between ln([M]₀/[M]) and polymerization time indicated that the polymerization was first‐order with respect to monomer concentration. The molecular weights increased linearly with monomer conversion and were close to corresponding theoretical values. The molecular weight distributions (M _w /M _n ) kept very narrow (M _w /M _n <1.1) at a wide range of conversions of 14.2% to 73.3%. The obtained polymer had a strong ultraviolet absorption at 329 nm, which indicated that the 1a moiety remained at the end of polymer chain.     

Study on the Fluorescence System of Oxolinic Acid‐Tb(III) and the Determination of Oxolinic Acid

Abstract

In Tris‐HCl buffer (pH=7.43), Tb³⁺ can react with oxolinic acid (OA) and form a 1:2 complex, which emits the intrinsic fluorescence of Tb³⁺. Based on this, a new fluorimetric method of determination of OA is developed. Under the optimum conditions, the enhanced fluorescence intensity of the system is proportional to the concentration of OA in the range of 1.5×10^?7～2.5×10^?5mol/L, and the detection limit is 5.5×10^?9 mol/L. Recovery test was also satisfactory. The experiments indicated that the luminescence mechanism was attributed to the M*–M luminescence.     

Donor-Acceptor Complexes in Copolymerization. IX. Kinetic Features of Copolymerization of Styrene and Methyl Methacrylate… Al(C2H5))1.5Cl1.5

The kinetic features of the copolymerization of styrene and methyl methacrylate in the presence of ethylaluminum sesquichloride in toluene do not unequivocally distinguish between first- and second-order reactions. The reaction does not attain steady-state conditions. The course of the reaction is apparently influenced by many factors including the dissociation of the polymerizable complex into unreactive monomeric species and physical phenomena such as diffusion and dilution effects as well as matrix formation. The use of azobisisobutyronitrile as an initiator indicates apparent bimolecu-lar termination but the kinetic curves show deviation from linearity.     

An Approximate Kinetic Treatment of Slow‐Initiated Living Polymerization. II. First‐Order Initiation and Half‐Order Propagation

An approximate analytical solution of the set of differential equations modeling the anionic polymerization of styrene is presented. By using this solution, a new method for calculating the initiation rate constant for this polymerization process was developed.     

Simultaneous Determination of 13 Phenoxy Acid Herbicide Residues in Soybean by GC‐ECD

Abstract

In this study, a gas chromatography method for the multiresidue determination of 13 phenoxy acid herbicide residues (4‐CPA, 4‐CPP, phenoxy butyric acid, dicamba, MCPA, MCPP, MCPB, 2,4‐D, 3,4‐D, 2,4,5‐T, 2,4,5‐TP, 2,4‐DP, and 2,4‐DB) in soybean was developed. After the removal of fat using n‐hexane, the sample was extracted with acetonitrile‐50 mM HCl (v/v 7:3), and then followed by liquid‐liquid partition with n‐hexane (saturated by acetonitrile). The soybean extract was further cleaned up by anion exchange column. Then the residues were derived with pentafluorobenzyl bromide and the resulting pentafluorobenzyl (PFB) esters were analyzed by a gas chromatograph equipped with an electron capture detector (ECD), quantified by the external standard method. Recoveries of spiked samples at two fortified levels (0.01 and 0.1 mg/kg) are all above 70%. And the relative standard deviation was less than 20%. It shows that the limits of determination (LOD) of this method (S/N≥3) can meet the requirement of maximum residue analysis in import/export inspection for soybean.     

Atom Transfer Radical Polymerization of MMA Initiated by 2‐(4‐chloromethyl‐phenyl)‐benzoxazole and Fluorescent Property of PMMA

Atom transfer radical polymerization (ATRP) of MMA was conducted using 2‐(4‐chloromethyl‐phenyl)‐benzoxazole as initiator, CuCl as catalyst, and PMDETA as ligand. The results show that the polymerization is a first order reaction with respect to monomer concentration. The polymerization displayed living character as evidenced by a liner increase of monomer weight with conversation and a relatively narrow distribution (Mn/Mw range from 1.30 to 1.45). The structure of PMMA was analyzed by ¹H‐NMR and proved the polymerization could be controlled to some degree. The optical property of the initiator was well preserved in the resulting PMMA, and the end‐functionalized PMMA exhibited fluorescent emission at 360 nm whether in DMF solution or in film state.     

Comparison of Gelation in the Free‐Radical Polymerization of Triallyl Isocyanurate and its Isomer Triallyl Cyanurate

Free‐radical polymerizations of triallyl cyanurate (TAC) and its isomer triallyl isocyanurate (TAIC) were conducted in bulk at 60°C. In the polymerization of TAIC, gelation occurred at 12.4% conversion, quite early compared to 21.3% for TAC. The primary chain length of TAIC polymer, as estimated from GPC‐LALLS measurements, was quite high. Although TAIC undergoes more cyclic polymerization than TAC, its greater primary chain length causes it to gel at a lower conversion. On the other hand, the difference in the rate of polymerization between TAC and TAIC was quite small compared to that of the primary chain length. These results are discussed mechanistically in connection with the degradative chain transfer characteristics of the polymerization of allyl compounds.