The Preparation and Biodegradable Properties of Poly(L‐lactic acid)‐Poly(ϵ‐caprolactone) Multiblock Copolymers

Multi‐block copolymers of PLLA and PCL were prepared by a coupling reaction between PLLA and PCL prepolymers with –NCO end groups. FTIR proved that the products were PLLA‐PCL copolymers. The weight‐average molecular weight of the copolymers was up to 180,000 at a composition of 60% PLLA and 40% PCL. The degradation properties of PLLA and PLLA‐PCL copolymers were studied by a soil burial test and a hydrolysis test in a phosphate‐buffer solution. The degradation rate was estimated by the mass loss, molecular weight reduction, pH value changes and swelling index; the degradation rates of the copolymers were a function of the composition of PLLA and PCL. Increasing PCL content in the copolymers resulted in lower degradation rate.     

Preparation and Surface Properties of Fluorine‐Containing Diblock Copolymers PLMA‐Block‐PFAEA

A series of fluorine‐containing diblock copolymers based on lauryl methacrylate and 1H,1H,2H,2H‐perfluoroalkyl acrylate have been prepared by atom transfer radical polymerization (ATRP). The preparation process of PLMA‐Br macroinitiators was controlled within a reasonable time corresponding to the ln [M₀]/[M_t]～time plot of the reaction. FTIR, ¹H‐NMR, GPC and fluorine‐element analysis (FEA) were used to characterize the synthesized block copolymers. The solid surface activity of these polymers was demonstrated by contact angle measurement. The polymer films prepared by block copolymers with more than three fluorinated units showed low dispersion force contributions to the surface energy indicating the presence of the fluorinated block at the surface. The surface activity in solutions was measured by drop‐weight method. Ii is interesting to find, when the fluorine weight percentage is controlled constant, that PLMA‐b‐PFAEA with larger molecular size is more prominent in exploiting the fluorinated structure to reduce the surface tension of solutions. The block copolymer's ability in reducing surface tension of solutions also depends on the type of solvent.     

Polyimide‐Polydimethylsiloxane Copolymers. Evaluation of the Thermal and Electrical Properties

Poly(dimethylsiloxane‐amic‐acid)s have been prepared starting from a fluorinated dianhydride, namely 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride, and a mixture of an aromatic diamine and bis(aminopropyl)‐oligodimethylsiloxane of controlled molecular weight, in different ratios. A solution imidization procedure was used to convert them quantitatively to the corresponding polyimides. The polymers, easily soluble both in polar (N‐methylpyrrolidone) and less polar (chloroform) solvents, were prepared for film‐forming by casting from solution. The thermal behavior in dependence on composition was evaluated by thermogravimetric analysis and differential scanning calorimetry. The kinetic processing of thermogravimetric data was carried out using the Flynn‐Wall‐Ozawa and Kissinger methods. Electrical insulating properties of some polymer films were evaluated on the basis of dielectric constant and dielectric loss tangent and their variation with frequency.     

Preparation of Poly(ethylene terephthalate)‐g‐Methacrylamide Copolymers Initiated by Azobisizobutyronitrile: Characterization and Investigation of Some Properties

Poly(ethylene terephthalate)‐g‐methacrylamide (PET‐g‐MAAm) copolymer was prepared by graft copolymerization in organic solvent/water mixtures by using azobisizobutyronitrile (AIBN) as an initiator. The highest graft yield was obtained in 20/80 (v/v) acetonitrile/water mixture as 30.0%. The effect of polymerization parameters such as the ratio of solvent/water mixture, concentrations of initiator and monomer, temperature and time on the graft yield was studied. The moisture regain of the PET fiber increased with grafting from 0.42% to 3.01%. Thermogravimetric data showed that the thermal stability of PET fibers decreased with grafting and 85% of total weight of 29.7% grafted fiber was lost at 500°C. On the other hand, fiber density decreased with increasing graft yield. At SEM micrographs, the layers oriented in the direction of fiber length were observed on the surface of PET fiber as a result of grafting.     

Synthesis,Structures, and Properties of Novel N‐Aryl‐phenanthren‐o‐iminoquinones

The interaction of 9,10‐phenanthrenquinone with primary amines has been studied. Use of sterically hindered anilines gave the phenanthren‐o‐iminoquinones in good yields. These compounds are structural analogues of o‐benzoquinones. Using single‐electron reduction, o‐iminoquinones may synthesize metal's free‐radical complexes.     

Synthesis,Structures and Properties of Polyimide Based on 2,2′‐Bis(4‐aminophenoxy phenyl) Propane

2,2‐Bis[4‐(4‐aminophenoxy)phenyl] propane (BAPP), as a monomer to prepare polyimide, was synthesized from Bisphenol A and p‐chloronitrobenzene via the nucleophilic substitution reaction. The structures of the diamine monomer BAPP and an intermediate dinitrocompound 2,2′‐bis(4‐nitrophenoxy phenyl) propane (BNPP) were confirmed by FTIR and NMR. A novel polyimide was derived from BAPP and 3,3′,4,4′‐oxydiphthalic dianhydride (ODPA) in DMAc by a two‐step method. FTIR, DSC, TGA, and DMA were employed to characterize the precursor and the polyimide. The glass transition temperature of the polyimide was about 225–230°C. The measurement of mechanical properties indicated that the polyimide exhibited a typical yield behavior of thermoplastic polymers, which is very different from other polyimides. The elongation at break of the polyamic acid and polyimide was 6% and 29%, respectively.     

Synthesis and Properties of Poly(AAm‐KMA‐MA) Hydrogels

In this investigation, poly(acrylamide‐co‐potassium methacrylate‐co‐maleic acid) hydrogels, poly(AAm‐KMA‐MA) were synthesized by redox copolymerization in aqueous solution. The effect of reaction parameters, such as concentration of maleic acid, crosslinking agent, initiator and activator, on the swelling behavior was investigated in detail. The swelling/diffusion characteristics were also evaluated for 1,4‐butanediol diacrylate (BDDA) and 1,2‐ethyleneglycol dimethacrylate (EGDMA) crosslinked hydrogels having different amounts of maleic acid. The results indicate that the water diffusion of hydrogels was of a non‐Fickian type. The hydrogels were characterized by IR spectroscopy and thermogravimetric analysis (TGA). Their surface characteristics were observed by using scanning electron microscopy (SEM). Furthermore, their swelling phenomena in different pH and salt solutions and simulated biological fluids was also studied.     

The Influences of Polymers and Temperature on the Foam Properties of 3‐Dodecylalkoxyl‐2‐hydroxylpropyl Trimethylammonium Chloride

The foam performances of 3‐dodecoxy‐2‐hydroxypropyl trimethylammonium chloride (C₁₂TAC) have been determined in the existence of different relative amount of polymer. The experimental results show that the foaming ability of the mixture systems of the C₁₂TAC/PEG and C₁₂TAC/PVP is stronger than that of the surfactant solutions in the absence of polymer, and with the increase of relative amount of polymer both foaming efficiency and foam stability of the surfactant solutions are evidently enhanced. For the aqueous solution of the surfactant, effect of temperature on foaming properties has also been examined. The results show that both the foaming ability and stability of the foams of the surfactant solutions are highest (or strongest) at 30°C.     

Synthesis and Application of Chitosan‐g‐PLLA Copolymers

The purpose of this paper is to study the synthesis and application of a new type of chitosan‐g‐poly(L‐lactide) copolymer with different grafting percentage in the presence of triethylamine. FTIR and ¹H NMR results indicate that grafting percentage of graft copolymers increases with the molar feeding ratio of L‐lactide to chitosan. The measurement of XRD and TG shows that graft copolymer exhibits low crystallinity and thermal degradation temperature. Static water contact angle testing suggests that graft copolymer has superior hydrophilicity compared with PLLA, which can be very useful for biomedical applications. 5‐Fluorouracil loaded copolymer microspheres were prepared by phase separation method. The size and distribution of microspheres were measured by a Laser particle analyzer. The microspheres with LLA:CS feeding molar rotio (15∶1) have a mean diameter of 332 nm with a narrow unimodal distribution. The spherical microspheres were observed by transmission electron microscopy (TEM). The microspheres shows good releasing property from drug release in vitro, and the drug release rate decreases as the increase of microspheres size.     

Synthesis and Properties of Poly(Aryl Ether Ketone) Copolymers with Trifluoromethyl‐Substituted Benzene in the Side Chain

The new monomer (4‐(4′‐trifluoromethyl)phenoxyphenyl)hydroquinone (TFPOPH) was synthesized in a three‐step synthesis. A series of poly(aryl ether ketone) copolymers were prepared by the reaction of (4‐(4′‐Trifluoromethyl)phenoxyphenyl)hydroquinone and hydroquinone (HQ) with 4,4′‐difluorobenzophenone (DFB) in the presence of potassium carbonate in tretramethylene sulfone (TMS). Thermal analyses of the fluorinated copolymers showed that the glass transition temperature and 5.0% weight loss temperature are similar with that of PEEK, and the crystallinity decreased with increasing of TFPOPH. For the copolymer synthesized with the molar fraction of TFPOPH in the diphenol monomers (TFPOPH, HQ) being over 0.2, no cold crystallization temperature and melting temperature were detected, indicating that these copolymers are almost amorphous. The crystal structure of the copolymers with the molar fraction of TFPOPH being not higher than 0.2 is rhombic. The solubility in polar aprotic solvents of poly(aryl ether ketone)s copolymers increases and dielectric constant decreases step by step.     

The Synthesis of Hydrophobically Modified Water‐Soluble Polyzwitterionic Copolymers and Responsiveness to Surfactants in Aqueous Solution

Abstract

A novel zwitterionic surfactant monomer containing a carboxybetaine moiety and a 10 carbon aliphatic tail was synthesized and copolymerized with acrylamide to yield a water‐soluble, hydrophobically modified zwitterionic polymer [Poly(acrylamide‐co‐(3‐(N,N‐dimethyl‐N‐3′‐(N′‐acryloyl)aza‐tridecyl) ammonio butanoate))]. The response of aqueous polymer solutions to the addition of various classes of surfactant was investigated and compared to that of an analogous novel polymer containing the sulfobetaine zwitterion [Poly(acrylamide‐co‐(N,N‐dimethyl‐N‐3′‐(N′‐acryloyl) aza‐tridecyl) ammonio propane sulfonate))]. It was found that the addition of sodium dodecyl sulfate (SDS) produced a pronounced maximum in viscosity, while dodecyltrimethylammoniumbromide (DTAB), N‐dodecyl‐N,N‐dimethylammonio‐1‐propanesulfonate (SB3‐12), and Triton X‐100 either had no effect, or produced a decrease in viscosity. The effect of pH on polymer–SDS interaction was also studied. Lowering pH increased the SDS–polymer interaction and significantly shifted viscosity enhancement to a higher SDS concentration.     

Crystal Structure and Catalytic Properties of Tetrakis (4-hydroxyphenyl) Porphyrinato Manganese(Ⅲ) Chloride (MnTHPPCl)

The crystal structure of meso-tetrakis(4-hydroxyphenyl)porphyrinato manganese chloride(MnTHPPCl)and its supramolecular architecture based on the hydrogen bonds of one counter Cl anion with four hydrogen atoms of four-OH groups from different MnTHPPCl molecules cooperated by self-assembly of the porphyrin units were first reported.This compound crystallized in the tetragonal space group I4/m with a=1.39928(7)nm,b=1.39928(7)nm,c=0.94498(10)nm,V=1.8503(2)nm3,and Z=2.As a catalyst,MnTHPPCl also showed a high catalytic acti-vity in the conversion from 1-naphthylamine(1-NA)to bis(4-oxo-benzo-2-cyclohexen-1-yl)amine(BOBCHA)via oxidative coupling under mild conditions.     

Copolymers of 4‐(3′,4′‐Dimethoxycinnamoyl)phenyl Acrylate and MMA: Synthesis,Characterization, Photocrosslinking Properties,and Monomer Reactivity Ratios

Abstract

4‐(3′,4′‐Dimethoxycinnamoyl)phenyl acrylate (DMCPA) containing pendant chalcone moiety was copolymerized with methyl methacrylate (MMA) by radical polymerization in ethyl methyl ketone at 70°C under a nitrogen atmosphere using benzoyl peroxide (BPO) as a free radical initiator. The prepared polymer was characterized by UV, FT‐IR, ¹H‐NMR, and ¹³C‐NMR spectra. The composition of the copolymer was determined using ¹H‐NMR analysis. The monomer reactivity ratios of copolymerization were determined using conventional linearization methods such as Fineman–Ross (r ₁ = 0.26 and r ₂ = 0.61), Kelen–Tudos (r ₁ = 0.26 and r ₂ = 0.61), and Ext. Kelen–Tudos (r ₁ = 0.23 and r ₂ = 0.59), and a non‐linear error‐in‐variables model (EVM) method using the computer program RREVM (r ₁ = 0.2541 and r ₂ = 0.6094). The molecular weights (M _w and M _n) of the copolymers were determined by gel permeation chromatography. Thermogravimetric analysis of the polymers in air reveals that the stability of the copolymers decreases with an increase in the mole fraction of MMA in the copolymers. The solubility of the polymers was tested in various polar and non‐polar solvents. The glass transition temperature of the copolymers was determined as a function of copolymer composition. The copolymers were sensitive to UV light and became crosslinked after irradiation with 254 nm light.     

Study of Structures and Electronic Properties of Pdn-1Pb and Pdn(n≤8) Clusters

Geometric and electronic properties of Pdn-1Pb and Pdn(n≤8) clusters have been studied by using density functional theory with effective core potentials, focusing on the differences between mono- and bimetallic clusters. The average bond length of Pdn-1Pb (n≤8) bimetallic clusters is longer than that of pure palladium clusters except for n = 2 and 3. The most stable structure of Pdn-1Pb (n≤7) is the singlet where there is at least a Pd or Pb atom on its excited state. The energy gaps of Pd-Pb binary clusters are narrower than those of Pdn clusters, and then the chemical activity is strengthened when Pdn clusters are doped with Pb.     

Synthesis,Characterization and Photocrosslinking Properties of Poly(1‐(4‐Methacrylamidophenyl)‐1‐(4‐nitrophenyl)prop‐1‐en‐3‐one)

The phenylmethacrylamide monomer, 1‐(4‐methacrylamidophenyl)‐1‐(4‐nitrophenyl)prop‐1‐en‐3‐one (MPNP) containing a photosensitive group was synthesized by reacting 4‐nitrocinnamoylaniline with methacryloyl chloride in the presence of triethylamine at 0–5°C. The functional monomer, MPNP was polymerized in ethyl methyl ketone (EMK) under nitrogen atmosphere at 70°C using benzoyl peroxide (BPO) as the initiator. The synthesized polymer was characterized by UV, IR, ¹H‐NMR and ¹³C‐NMR spectroscopy. The molecular weight data of the polymer as obtained from gel permeation chromatography suggests a higher tendency for chain termination by radical recombination than disproportionation. The thermal studies of the polymer were obtained from thermogravimetric analysis. The glass transition temperature of the polymer was determined by differential scanning calorimetry. The solubility of the polymer was tested in various organic solvents at room temperature. The photosensitivity of the polymer was investigated in various solvents in the presence and absence of triplet photosensitizers. The effect of the different solvents nature and concentration on the rate of photocrosslinking of the polymer were also examined for using the polymer as negative photoresist materials.     

Synthesis and Characterization of Poly(methyl methacrylate‐co‐hydroxyethyl methacrylate)‐b‐polyisobutylene‐b‐poly(methyl methacrylate‐co‐hydroxyethyl Methacrylate) Triblock Copolymers

The synthesis of poly[(methyl methacrylate‐co‐hydroxyethyl methacrylate)‐b‐isobutylene‐b‐(methyl methacrylate‐co‐hydroxyethyl methacrylate)] P(MMA‐co‐HEMA)‐b‐PIB‐b‐P(MMA‐co‐HEMA) triblock copolymers with different HEMA/MMA ratios has been accomplished by the combination of living cationic and anionic polymerizations. P(MMA‐co‐HEMA)‐b‐PIB‐b‐P(MMA‐co‐HEMA) triblock copolymers with different compositions were prepared by a synthetic methodology involving the transformation from living cationic to anionic polymerization. First, 1,1‐diphenylethylene end‐functionalized PIB (DPE‐PIB‐DPE) was prepared by the reaction of living difunctional PIB and 1,4‐bis(1‐phenylethenyl)benzene (PDDPE), followed by the methylation of the resulting diphenyl carbenium ion with dimethylzinc (Zn(CH₃)₂). The DPE ends were quantitatively metalated with n‐butyllithium in tetrahydrofuran, and the resulting macroanion initiated the polymerization of methacrylates yielding triblock copolymers with high blocking efficiency. Microphase separation of the thus prepared triblock copolymers was evidenced by the two glass transitions at ?64 and +120°C observed by differential scanning calorimetry. These new block copolymers exhibit typical stress‐strain behavior of thermoplastic elastomers. Surface characterization of the samples was accomplished by angle‐resolved X‐ray photoelectron spectroscopy (XPS), which revealed that the surface is richer in PIB compared to the bulk. However, a substantial amount of P(MMA‐co‐HEMA) remains at the surface. The presence of hydroxyl functionality at the surface provides an opportunity for further modification.     

Properties and Characterization of Modified HZSM—5 Zeolites

Physicochemical and catalytic properties of phosphorus and boron modified HZSM-5 zeolites treated with 100% steam at 673K were investigated.The acidity and distribution of acidic sites were studied by infrared spectroscopy using pyridine as probe molecule and temperature programmed desortion (TPD) of ammonia.The structure of the samples was characterized by XRD,and the textural properties of the catalysts were determined by nitrogen isothermal adsorption-desorption measurements and scanning electron microscopy(SEM).The XRD results show that the modified samples have no novel crystalline phase,indicating a high dispersion of phosphorus and boron species.After treatment,the microporous volume and surface area of the samples markedly decrease,implying the bolockage of the channel.The nitrogen adsorption-desorption measurements suggest that the isothermal type of all samples is a combination of isothermal type Ⅰ and Ⅳ，and all hysteresis loops resemble the H4-type in the IUPAC classification.The total acidity of the modified samples,determined by pyrldine adsorption IR and TPD of ammonia,decreases in contrast to that of the parent HZSM-5.The conversion of n-heptane over P and B steammodified HZSM-5 is higher than that of P and B-modified HZSM-5 zeolites but lower than that of the parent HZSM-5.     

Synthesis, Characterization and Solution Properties of Hydrophobically Modified Polyelectrolyte Poly(AA-co-TMSPMA)

The hydrophobically modified polyelectrolyte was synthesized using precipitation polymerization of acrylic acid and 3-[tris(trimethylsilyloxy)silyl]propyl methacrylate (TMSPMA) in various molar ratios in supercritical carbon dioxide. FT-IR, ¹H NMR, capillary viscometry, rotational viscometer, transmission electron microscopy and fluorescence spectroscopy were used to characterize this copolymer. The viscosity of the copolymers showed a strong dependence on pH with a maximum at pH=5.5. Associating morphologies of the copolymer were observed by TEM. Associating morphologies of poly(AA-co-TMSPMA) solution changed from a global structure to a shell-core structure with increasing hydrophobic levels. A solution of sample PAT4 with a shell-core structure had the largest viscosity value. In addition, the critical micelle concentration of copolymer solution, cmc, was determined from the relative viscosity. The critical micelle concentration was further confirmed by fluorescence spectroscopy using 1-pyrenemethylamine hydrochloride, PyMeA⋅HCl, as a cationic fluorescent probe. The cmc was determined from the intensity ratios, the first to the third emission peaks I ₁/I ₃, and the excimer to monomer I _E/I _M ratio of the pyrene probe as a function of concentration.     

Syntheses,Structures,and Photoluminescent Properties of Two Zn(Ⅱ) Coordination Polymers with Helical Chains Structures

Two novel coordination polymers with helical chains, {[Zn(L)(H2O)]?H2O}n(1) and {[Zn(L)(p-bix)]?3.5H2O}n(2), where H2 L = 5-(4-hydroxypyridinium-1-ylmethyl) isophthalic acid and p-bix = 1,4-bis(imidazol-1-ylmethyl)benzene, have been hydrothermally synthesized, and charac-terized by elemental analysis, powder X-ray diffraction(PXRD), IR, thermal gravimetric analyses(TGA) and also by single-crystal X-ray diffraction. Both complexes 1 and 2 crystallize inmonoclinic, space group P21/c. Compound 1 displays a two-dimensional(2D) structure with two distinct types of helical chains; 2 shows a layered coordination polymer with two types of helical chains and features an interesting 2D→3D interdigitated architecture. Meanwhile, the luminescent properties of 1 and 2 have also been investigated in detail.     

Novel Copolymers of Styrene and Alkoxy Ring‐Substituted 2‐Phenyl‐1,1‐dicyanoethylenes

Electrophilic trisubstituted ethylene monomers, ring‐substituted 2‐phenyl‐1,1‐dicyanoethylenes, RC₆H₄CH?C(CN)₂ (where R is 2‐methoxy, 3‐methoxy, 4‐methoxy, 4‐ethoxy, 4‐propoxy, and 4‐butoxy), were synthesized by piperidine catalyzed Knoevenagel condensation of ring‐substituted benzaldehydes and malononitrile, and characterized by CHN elemental analysis, IR, ¹H‐ and ¹³C‐NMR. Novel copolymers of the ethylenes and styrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator (AIBN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C NMR, GPC, DSC, and TGA. High T _g of the copolymers in comparison with that of polystyrene indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. The gravimetric analysis indicated that the copolymers decompose in the 290–450°C range.