A comparative study of the structural, thermal, mechanical and thermomechanical properties of ethylene-octene copolymer 1
1 Ethylene-octene copolymer is produced using Dow's INSITETM ™ constrained geometry catalyst and process technology. ENGAGE the trade name of this copolymer.
(mPE) 2
2 This copolymer will be represented as mPE .
nanocomposites synthesized with pure nanosilica (NS) and nanosilica-functionalized with diglycidyl ether of bisphenol-A (ENS) has been reported. These nanocomposites were prepared using “melt mixing” method at a constant loading level of 2.5 wt. %. The effects of pure nanosilica (NS) and epoxy resin-functionalized-nanosilica (ENS) on the above mentioned properties of ethylene-octene copolymer were analyzed by wide-angle-x-ray diffractometer (WAXD), transmission electron microscope (TEM), thermo gravimetric analyzer (TGA), differential scanning calorimeter (DSC), dynamic mechanical analyzer (DMA) and scanning electron microscope (SEM). TEM studies have shown a better dispersion of nanoparticles in case of ethylene-octene copolymer-epoxy resin-functionalized-nanosilica nanocomposite (mPE-ENS) than that of ethylene-octene copolymer-nanosilica nanocomposite (mPE-NS). The tensile tests show that organic modification of nanosilica particles brings up an appreciable increase in yield strength, ultimate tensile strength and elongation at break of the polymer. DMA studies have shown an increase in the storage modulus and glass transition temperature for mPE-ENS with respect to mPE-NS. Further, the TGA results have shown a higher thermal stability for mPE-ENS in comparison to mPE-NS. 相似文献
An oligo-fluoropolymer(PFM) with functional cycloaliphatic epoxy and fluorinated groups was obtained via free radical polymerization and applied to the modification of cycloaliphatic epoxy resins(CE). The chemical structure of PFM was characterized by Fourier transform infrared(FTIR) spectroscopy, gel permeation chromatography(GPC) and nuclear magnetic resonance(NMR) spectroscopy, and the effects of different PFM concentrations(0.5%—6%, mass fraction) on the thermal resistance, mechanical properties, surface dewettability, light transmission, refractive index and various cured polymer properties were studied in detail. The DSC and TGA results demonstrate that the modified epoxy resins possess a higher thermal resistance than the neat epoxy resin. The improvements in the surface dewettability and water resistance are caused by the high crosslinking density and the enrichment of the oligo-fluorinated random copolymers dispersed in the matrix. The fracture surface morphologies of the thermosets were investigated by scanning electron microscopy(SEM) and transmission electron microscopy(TEM). It was observed that the optical transmittance of the composites was maintained even though microphase separation occurred during the curing process. With respect to the corresponding properties of the neat epoxy resins, the 2 phr(parts per hundreds of resin) PFM thermoset exhibited relatively better comprehensive properties, making the cured material a good candidate for light-emitting diode(LED) encapsulation. 相似文献
Bisphenol A based low-molecular-weight epoxy resin was modified with epoxidized soybean oil, which exhibit viscosity reducing ability comparable to commercial grade active diluents. The studied compositions showed a non-Newtonian rheological behavior, typical for Bingham liquids. The values of the flow index (n) and the consistency index (k) for the compositions tested in the temperature range 25–65 °C were calculated from the Ostwald-de Waele rheological model and were used to calculate the flow-activation energy (Ea) using the Arhenius equation. Studies of co-crosslinking of mixed oil-resin compositions using isophorone diamine showed essential decrease of the reaction heat and peak maximum temperature. Mechanical properties, thermal stability, water absorption and chemical resistance of the epoxy resin modified with natural oil, were also investigated. Compositions of epoxy resin Ruetapox 0162, modified with the oil diluent, preserved very good mechanical properties of the epoxy resins and demonstrated relatively low water absorption as well as high chemical resistance. The compositions displayed even higher impact strength than pure epoxy resin due to plasticizing effect of the built-in oil. Compositions with the high contents (up to 60 weight %) of the oil were flexible materials with fast elastic recovery. 相似文献
Epoxy resins are widely utilized as high performance thermosetting resins for many industrial applications but characterized by a relatively low toughness. Electron beam (EB) curing of polymer resins has a number of advantages over conventional thermal curing, such as shorter curing time, low energy consumption, low cure temperature, dimensional stability, reduced manufacturing cost. In the present work liquid carboxyl-terminated butadiene acrylonitrile (CTBN) copolymers containing 8% acrylonitrile is added at different contents to improve the toughness of diglycidyl ether of bisphenol A (DGEBA) epoxy resins using triarylsulfonium hexafluoroanimonate as a photointiator. The EB irradiation was conducted 5 kGy to 250 kGy in nitrogen. The physics properties of CTBN modified epoxy resins were examined by determine gel content, DMA (dynamic mechanical analysis), UTM (Instron model 4443), SEM (scanning electron microscopy). 相似文献
The main purpose of this work is to provide a comprehensive overview on the preparation of multifunctional epoxies, with improved antimicrobial activity and enhanced mechanical properties through nanomodification. In the first section, we focus on the approaches to achieve antimicrobial activity, as well as on the methods used to evaluate their efficacy against bacteria and fungi. Relevant application examples are also discussed, with particular reference to antifouling and anticorrosion coatings for marine environments, dental applications, antimicrobial fibers and fabrics, and others. Subsequently, we discuss the mechanical behaviors of nanomodified epoxies with improved antimicrobial properties, analyzing the typical damage mechanisms leading to the significant toughening effect of nanomodification. Some examples of mechanical properties of nanomodified polymers are provided. Eventually, the possibility of achieving, at the same time, antimicrobial and mechanical improvement capabilities by nanomodification with nanoclay is discussed, with reference to both nanomodified epoxies and glass/epoxy composite laminates. According to the literature, a nanomodified epoxy can successfully exhibit antibacterial properties, while increasing its fracture toughness, even though its tensile strength may decrease. As for laminates—obtaining antibacterial properties is not followed by improved interlaminar properties. 相似文献
The thermal mechanical properties and degradation behaviors were studied on fibers prepared from two high-performance, heterocyclic polymers, poly(p-phenylenebenzobisthiazole) (PBZT) and poly(p-phenylenebenzobisoxazole) (PBZO). Our research demonstrated that these two fibers exhibited excellent mechanical properties and outstanding thermal and thermo-oxidative stability. Their long-term mechanical tensile performance at high temperatures was found to be critically associated with the stability of the C—O or C—S linkage at the heterocyclic rings on these polymers' backbones. PBZO fibers with the C—O linkages displayed substantially higher thermal stability compared to PBZT containing C—S linkages. High resolution pyrolysis-gas chromatography/mass spectrometry provided the information of the pyrolyzates' compositions and distributions as well as their relationships with the structures of PBZT and PBZO. Based on the analysis of the compositions and distributions of all pyrolyzates at different temperatures, it was found that the thermal degradation mechanisms for both of these heterocyclic polymers were identical. Kevlar®-49 fibers were also studied under the same experimental conditions in order to make a comparison of thermo-oxidative stability and long-term mechanical performance at high temperatures with PBZO and PBZT fibers. The data of two high-performance aromatic polyimide fibers were also included as references.This revised version was published online in November 2005 with corrections to the Cover Date. 相似文献
Polyimide/silica hybrids were produced by a sol-gel process and were examined in terms of their morphology, dynamic-mechanical properties and mechanical performances. Two types of morphology were obtained by tailoring the composition of the precursor solution mixture, i.e. phase- separated or co-continuous systems. These morphologies were found to exhibit considerably different properties. In particular, co-continuous nanocomposite systems were found much more effective in suppressing molecular relaxation processes than micron sized particulate hybrids. The latter systems, on the other hand, exhibited enhanced ductility and fracture toughness 相似文献
Epoxy resin was used to modify polybutylene terephthalate(PBT) and glycidyl methacrylate functionalized methyl methacrylate-butadiene(MB-g-GMA) blend. Results show that MB-g-GMA dispersed in PBT matrix uniformly and PBT/MB-g-GMA/epoxy blends reveal good compatibility. However, the added epoxy resin restricted the mobility of PBT macromolecular chains during the growth process of the crystal, which reduced the final crystallinity of PBT. The PBT/MB-g-GMA blend containing 1%(mass fraction) epoxy resin exhibited good mechanical properties. For example, the notched impact strength of the PBT/MB-g-GMA blend with 1%(mass fraction) epoxy resin was about 2 times that of PBT/MB-g-GMA blend. Sanning electron microscope(SEM) results show that the shear yielding of the PBT matrix and the cavitations of rubber particles were the major toughening mechanisms. The chemical reaction between PBT and epoxy resin induced the high complex viscosity and storage modulus of PBT/MB-g-GMA blend. 相似文献
The use of poly(lactide)‐based materials is, in part, limited by their physical and mechanical properties. This article reviews the methods that have been employed to enable enhancement of the materials properties through synthetic manipulation of the polymer structure including block copolymer synthesis and modification of the lactide monomer structure, focusing on the application of ring‐opening polymerization. In turn the effect of these structural modifications on the properties of the resultant materials are reported.
