应用QM与ABEEM/MM结合的方法研究NAMI-A的结构性质

应用量子力学(QM)与ABEEM浮动电荷力场(ABEEM/MM)相结合的方法研究了抗癌药物NAMI-A在水溶液中的结构性质. 所有的结构优化都是在DFT的B3LYP方法下采用6-31G(d,p)和LanL2DZ基组完成的, 没有加入任何限制性条件. 结果表明, 优化得到的NAMI-A构型受不同环境及方法的影响均有变化. 与气相中得到的构型相比, QM/MM迭代优化得到构型要比PCM的构型变化更明显. QM/MM (ABEEM/MM)迭代优化得到的NAMI-A构型比QM/MM (OPLS-AA)的变化要小. 总之, 溶剂通过极化效应对NAMI-A结构、电荷分布及径向分布函数等性质均有影响, 客观地处理极化效应才能正确地反映QM区的性质.     

QM/MM calculation of solvent effects on absorption spectra of guanine

Electronic spectra of guanine in the gas phase and in water were studied by quantum mechanical/molecular mechanical (QM/MM) methods. Geometries for the excited‐state calculations were extracted from ground‐state molecular dynamics (MD) simulations using the self‐consistent‐charge density functional tight binding (SCC‐DFTB) method for the QM region and the TIP3P force field for the water environment. Theoretical absorption spectra were generated from excitation energies and oscillator strengths calculated for 50 to 500 MD snapshots of guanine in the gas phase (QM) and in solution (QM/MM). The excited‐state calculations used time‐dependent density functional theory (TDDFT) and the DFT‐based multireference configuration interaction (DFT/MRCI) method of Grimme and Waletzke, in combination with two basis sets. Our investigation covered keto‐N7H and keto‐N9H guanine, with particular focus on solvent effects in the low‐energy spectrum of the keto‐N9H tautomer. When compared with the vertical excitation energies of gas‐phase guanine at the optimized DFT (B3LYP/TZVP) geometry, the maxima in the computed solution spectra are shifted by several tenths of an eV. Three effects contribute: the use of SCC‐DFTB‐based rather than B3LYP‐based geometries in the MD snapshots (red shift of ca. 0.1 eV), explicit inclusion of nuclear motion through the MD snapshots (red shift of ca. 0.1 eV), and intrinsic solvent effects (differences in the absorption maxima in the computed gas‐phase and solution spectra, typically ca. 0.1–0.3 eV). A detailed analysis of the results indicates that the intrinsic solvent effects arise both from solvent‐induced structural changes and from electrostatic solute–solvent interactions, the latter being dominant. © 2009 Wiley Periodicals, Inc. J Comput Chem 2010     

Developing adaptive QM/MM computer simulations for electrochemistry

We report the development of adaptive QM/MM computer simulations for electrochemistry, providing public access to all sources via the free and open source software development model. We present a modular workflow‐based MD simulation code as a platform for algorithms for partitioning space into different regions, which can be treated at different levels of theory on a per‐timestep basis. Currently implemented algorithms focus on targeting molecules and their solvation layers relevant to electrochemistry. Instead of using built‐in forcefields and quantum mechanical methods, the code features a universal interface, which allows for extension to a range of external forcefield programs and programs for quantum mechanical calculations, thus enabling the user to readily implement interfaces to those programs. The purpose of this article is to describe our codes and illustrate its usage. © 2016 Wiley Periodicals, Inc.     

QM/MM Methods for Biomolecular Systems

Two are better than one : Quantum mechanics/molecular mechanics (QM/MM) methods are the state‐of‐the‐art computational technique for treating reactive and other “electronic” processes in biomolecular systems. This Review presents the general methodological aspects of the QM/MM approach, its use within optimization and simulation techniques, and its areas of application, always with a biomolecular focus.

     

Pseudobond ab initio QM/MM approach and its applications to enzyme reactions

This perspective article mainly focuses on the development and applications of a pseudobond ab initio QM/MM approach to study enzyme reactions. The following aspects of methodology development are discussed: the approaches for the QM/MM covalent boundary problem, an efficient iterative optimization procedure, the methods to determine enzyme reaction paths, and the approaches to calculate free energy change in enzyme reactions. Several applications are described to illustrate the capability of the methods. Finally, future directions are discussed.     

Methodological aspects of QM/MM calculations: A case study on matrix metalloproteinase‐2

We address methodological issues in quantum mechanics/molecular mechanics (QM/MM) calculations on a zinc‐dependent enzyme. We focus on the first stage of peptide bond cleavage by matrix metalloproteinase‐2 (MMP‐2), that is, the nucleophilic attack of the zinc‐coordinating water molecule on the carbonyl carbon atom of the scissile fragment of the substrate. This step is accompanied by significant charge redistribution around the zinc cation, bond cleavage, and bond formation. We vary the size and initial geometry of the model system as well as the computational protocol to demonstrate the influence of these choices on the results obtained. We present QM/MM potential energy profiles for a set of snapshots randomly selected from QM/MM‐based molecular dynamics simulations and analyze the differences in the computed profiles in structural terms. Since the substrate in MMP‐2 is located on the protein surface, we investigate the influence of the thickness of the water layer around the enzyme on the QM/MM energy profile. Thin water layers (0–2 Å) give unrealistic results because of structural reorganizations in the active‐site region at the protein surface. A 12 Å water layer appears to be sufficient to capture the effect of the solvent; the corresponding QM/MM energy profile is very close to that obtained from QM/MM/SMBP calculations using the solvent macromolecular boundary potential (SMBP). We apply the optimized computational protocol to explain the origin of the different catalytic activity of the Glu116Asp mutant: the energy barrier for the first step is higher, which is rationalized on structural grounds. © 2016 Wiley Periodicals, Inc.     

Spectral Features of Canthaxanthin in HCP2. A QM/MM Approach

The increased interest in sequencing cyanobacterial genomes has allowed the identification of new homologs to both the N-terminal domain (NTD) and C-terminal domain (CTD) of the Orange Carotenoid Protein (OCP). The N-terminal domain homologs are known as Helical Carotenoid Proteins (HCPs). Although some of these paralogs have been reported to act as singlet oxygen quenchers, their distinct functional roles remain unclear. One of these paralogs (HCP2) exclusively binds canthaxanthin (CAN) and its crystal structure has been recently characterized. Its absorption spectrum is significantly red-shifted, in comparison to the protein in solution, due to a dimerization where the two carotenoids are closely placed, favoring an electronic coupling interaction. Both the crystal and solution spectra are red-shifted by more than 50 nm when compared to canthaxanthin in solution. Using molecular dynamics (MD) and quantum mechanical/molecular mechanical (QM/MM) studies of HCP2, we aim to simulate these shifts as well as obtain insight into the environmental and coupling effects of carotenoid–protein interactions.     

QM/MM study of aqueous solvation of the uranyl fluoride [UO2F4(2-)] complex

The aqueous solvation of the uranylfluoride complex [UO(2)F(4) (2-)] was studied using full quantum mechanical (QM) and hybrid QM/molecular mechanics (MM) methods. Inclusion of a complete first solvation shell was found necessary to reproduce the experimentally observed heptacoordination of uranium. An efficient and accurate computational model is proposed that consists of structure optimization of the coordinated uranium complex as QM region, followed by single-point full QM calculations to compute relative energies. This method is proven feasible for studies of large solvated actinide complexes.     

Quantifying Electronic Effects in QM and QM/MM Biomolecular Modeling with the Fukui Function

Multi-scale quantum-mechanical/molecular-mechanical(QM/MM) and large-scale QM simulation provide valuable insight into enzyme mechanism and structure-property relationships. Analysis of the electron density afforded through these methods can enhance our understanding of how the enzyme environment modulates reactivity at the enzyme active site. From this perspective, tools from conceptual density functional theory to interrogate electron densities can provide added insight into enzyme function. We recently introduced the highly parallelizable Fukui shift analysis(FSA) method, which identifies how frontier states of an active site are altered by the presence of an additional QM residue to identify when QM treatment of a residue is essential as a result of quantum-mechanically affecting the behavior of the active site. We now demonstrate and analyze distance and residue dependence of Fukui function shifts in pairs of residues representing different non-covalent interactions. We also show how the interpretation of the Fukui function as a measure of relative nucleophilicity provides insight into enzymes that carry out S_N2 methyl transfer. The FSA method represents a promising approach for the systematic, unbiased determination of quantum mechanical effects in enzymes and for other complex systems that necessitate multi-scale modeling.     

QM/MM method for metal–organic interfaces

We present a QM/MM method for modeling metal/organic interfaces, which incorporates contributions from long‐range electron correlation, characteristic to metals and non‐bonded interactions in organic systems. This method can be used to study structurally irregular systems. We apply the method to model finite size domains of self‐assembled monolayers on the gold (111) surface and discuss the influence of boundary effects on the electrostatic and electronic properties of these systems. © 2010 Wiley Periodicals, Inc. J Comput Chem, 2010     

Flexible effective fragment QM/MM method: validation through the challenging tests

A new version of the QM/MM method, which is based on the effective fragment potential (EFP) methodology [Gordon, M. et al., J Phys Chem A 2001, 105, 293] but allows flexible fragments, is verified through calculations of model molecular systems suggested by different authors as challenging tests for QM/MM approaches. For each example, the results of QM/MM calculations for a partitioned system are compared to the results of an all-electron ab initio quantum chemical study of the entire system. In each case we were able to achieve approximately similar or better accuracy of the QM/MM results compared to those described in original publications. In all calculations we kept the same set of parameters of our QM/MM scheme. A new test example is considered when calculating the potential of internal rotation in the histidine dipeptide around the C(alpha)bond;C(beta) side chain bond.     

QM/MM study of the taxadiene synthase mechanism

Combined quantum mechanics/molecular mechanics (QM/MM) calculations were used to investigate the reaction mechanism of taxadiene synthase (TXS). TXS catalyzes the cyclization of geranylgeranyl diphosphate (GGPP) to taxadiene (T) and four minor cyclic products. All these products originate from the deprotonation of carbocation intermediates. The reaction profiles for the conversion of GGPP to T as well as to minor products were calculated for different configurations of relevant TXS carbocation complexes. The QM region was treated at the M06-2X/TZVP level, while the CHARMM27 force field was used to describe the MM region. The QM/MM calculations suggest a reaction pathway for the conversion of GGPP to T, which slightly differs from previous proposals regarding the number of reaction steps and the conformation of the carbocations. The QM/MM results also indicate that the formation of minor products via water-assisted deprotonation of the carbocations is highly exothermic, by about −7 to −23 kcal/mol. Curiously, however, the computed barriers and reaction energies indicate that the formation of some of the minor products is more facile than the formation of T. Thus, the present QM/MM calculations provide detailed insights into possible reaction pathways and into the origin of the promiscuity of TXS, but they do not reproduce the product distribution observed experimentally. © 2019 Wiley Periodicals, Inc.     

Accurate evaluation of the absorption maxima of retinal proteins based on a hybrid QM/MM method

Here we improved our hybrid QM/MM methodology (Houjou et al. J Phys Chem B 2001, 105, 867) for evaluating the absorption maxima of photoreceptor proteins. The renewed method was applied to evaluation of the absorption maxima of several retinal proteins and photoactive yellow protein. The calculated absorption maxima were in good agreement with the corresponding experimental data with a computational error of <10 nm. In addition, our calculations reproduced the experimental gas-phase absorption maxima of model chromophores (protonated all-trans retinal Schiff base and deprotonated thiophenyl-p-coumarate) with the same accuracy. It is expected that our methodology allows for definitive interpretation of the spectral tuning mechanism of retinal proteins.     

QM/MM vibrational mode tracking

Vibrational spectroscopy is a powerful tool to investigate the structure and dynamics of biomolecules. When small subsystems of large molecules such as active centers of enzymes are studied, quantum chemical calculations based on quantum mechanics/molecular mechanics (QM/MM) coupling schemes are a valuable means to interpret the spectra. The goal of this work is a methodological pilot study on how to selectively and thus efficiently extract certain vibrational information for extended molecular systems described by QM/MM methods. This is achieved by an extension of the mode tracking algorithm and a comparison with the partial Hessian diagonalization approach. After validating the methodology for the CO stretching vibration of 2-butanone and a delocalized CO stretch in acetylacetone, the stretching and bending modes of the CO ligand in CO myoglobin are tracked. Such systems represent an ideal application for mode tracking, because only a few strongly localized vibrations are sought for, while the large remainder of the molecule is of interest only as far as it affects these local vibrations. This influence is treated exactly by mode tracking.     

MM and QM/MM Modeling of Threonyl-tRNA Synthetase: Model Testing and Simulations

Aminoacyl-tRNA synthetases are centrally important enzymes in protein synthesis. We have investigated threonyl-tRNA synthetase from E. coli, complexed with reactants, using molecular mechanics and combined quantum mechanical/molecular mechanical (QM/MM) techniques. These modeling methods have the potential to provide molecular level understanding of enzyme catalytic processes. Modeling of this enzyme presents a number of challenges. The procedure of system preparation and testing is described in detail. For example, the number of metal ions at the active site, and their positions, were investigated. Molecular dynamics simulations suggest that the system is most stable when it contains only one magnesium ion, and the zinc ion is removed. Two different QM/MM methods were tested in models based on the findings of MM molecular dynamics simulations. AM1/CHARMM calculations resulted in unrealistic structures for the phosphates in this system. This is apparently due to an error of AM1. PM3/CHARMM calculations proved to be more suitable for this enzyme system. These results will provide a useful basis for future modeling investigations of the enzyme mechanism and dynamics.     

Contributions of pauli repulsions to the energetics and physical properties computed in QM/MM methods

Conventional combined quantum mechanical/molecular mechanical (QM/MM) methods lack explicit treatment of Pauli repulsions between the quantum‐mechanical and molecular‐mechanical subsystems. Instead, classical Lennard‐Jones (LJ) potentials between QM and MM nuclei are used to model electronic Pauli repulsion and long‐range London dispersion, despite the fact that the latter two are inherently of quantum nature. Use of the simple LJ potential in QM/MM methods can reproduce minimal geometries and energies of many molecular clusters reasonably well, as compared to full QM calculations. However, we show here that the LJ potential cannot correctly describe subtle details of the electron density of the QM subsystem because of the neglect of Pauli repulsions between the QM and MM subsystems. The inaccurate electron density subsequently affects the calculation of electronic and magnetic properties of the QM subsystem. To explicitly consider Pauli interactions with QM/MM methods, we propose a method to use empirical effective potentials on the MM atoms. The test case of the binding energy and magnetic properties of a water dimer shows promising results for the general application of effective potentials to mimic Pauli repulsions in QM/MM calculations. © 2013 Wiley Periodicals, Inc.     

Molecular Dynamics and Combined QM/MM Studies on the Deactivation of anti-Tubercular Drug Isoniazid by Arylamine N-Acetyltransferases

Both a molecule dynamic study and a combined quantum mechanics and mole-cule mechanics(QM/MM) study on the acetylating deactivation mechanism of isoniazid were presented.This type of reaction was catalyzed by arylamine N-acetyltransferases(NATs) and the results strongly support a direct acetyl group transfer process rather than a stepwise one.The isoniazid was strictly restrained in proper relative position to accept the acetyl group by a Hydrogen-bond network formed by the residues at the active center.The residues,His110 and Cys70,would be functioned as 'general base' rather than 'general acid'.If all the residues(including H2O molecules) were removed from the system,the activation energy will be increased from 145.1 to 243.3 kJ/mol.The calculations met the experimental data with good agreement.     

Hybrid QM/MM studies on energetics of malonaldehyde in condensed phase

Energetics of eight enol isomers of a malonaldehyde (MA) at the ground state in CCl₄ solvent environment have been investigated using a hybrid quantum mechanical (QM)/molecular mechanics (MM) method. It is found that relative energies of the isomers slightly change due to interactions between MA and surrounding atoms. In an isolated environment all eight isomers have stable planar structure. On the other hand, most of the isomers have nonplanar structure in CCl₄ whose interactions with the solute molecules are, however, weak. Mainly, structural changes are found in the H? O? C?C dihedral angle ?_{H? O? C?C}, i.e., a hydrogen atom that is connected directly with an oxygen atom, is located at a nonplanar position, and other atoms remain almost planar. Vertical excitation energies of low‐lying excited states at the resultant optimized structure of each isomer are evaluated. The vertical excitation energies in CCl₄ are almost the same as those in the isolated environment, but some changes were found in the triplet excitation states. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2004