Introduction of Multiple Hydrogen Bonding for Enhanced Mechanical Performance of Polymer-Carbon Nanotube Composites

Due to their outstanding mechanical properties and high aspect ratios, carbon nanotubes (CNTs) are envisioned as attractive nanofillers in polymer composites. However, due to strong van der Waals interactions, deleterious aggregation of CNTs is typically observed in polymer nanocomposites. Moreover, due to low stress transfer between the matrix polymer and the nanotube filler, only limited reinforcement is obtained. We report here a novel functionalization strategy to obtain CNTs with pendant self-complementary hydrogen bonding groups in order to address these limitations. Multi-walled CNTs were functionalized with ureidopyrimidinone (UPy) groups, which display multiple hydrogen bonding. The functionalized CNTs were blended with acrylic copolymers containing pendant UPy moieties and significant enhancement in tensile performance of the nanocomposites was observed.     

Polypropylene/layered double hydroxide nanocomposites: Synergistic effect of designed filler modification and compatibilizing agent on the morphology,thermal, and mechanical properties

This work addresses the optimization of the morphology, thermal, and mechanical properties of polypropylene/layered double hydroxide (LDH) nanocomposites. For this, the nanofillers were modified by a calcination rehydration process using two surfactants, sodium dodecylsulfate (SDS) and sodium dodecylbenzenesulfonate, respectively. The nanofillers were characterized at each step of the modification process by thermal gravimetry, X‐ray diffraction, and Infra red spectroscopy. Furthermore, the impact of anionic modifiers on the filler surface energy and on the interactions toward water was analyzed. Polypropylene (PP)/LDH nanocomposites were then prepared by a melt intercalation process and a high molar mass maleic anhydride functionalized polypropylene (PPgMA) was introduced as a compatibilizer. The dispersion of LDH in the PP matrix was characterized and the thermal and mechanical properties of the corresponding nanocomposites were determined and discussed as a function of the filler modification, of the nanocomposite morphology, and of the filler/matrix interfacial properties. The nanocomposites prepared from SDS modified LDH and PPgMA exhibited superior properties thanks to an optimized filler dispersion state and improved interfacial interactions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 782–794     

Biodegradable Nanocomposites Based on the Polyester Poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate) and Layered Silicate or Expanded Graphite

Novel nanocomposites based on the biodegradable polymer poly(3‐hydroxybutyrate‐co‐3‐hydroxyhexanoate) (PHBHx) and layered fillers, specifically layered silicate (clay25A) and expanded graphite (EG), were prepared by melt intercalation. The dispersion of the fillers in the PHBHx was characterized by wide‐angle X‐ray diffraction (WAXD) and transmission electron microscopy (TEM). The effects of the fillers on the polymer structure, thermal stability and mechanical properties of the nanocomposites were also studied, by differential scanning calorimetry, thermogravimetric analysis, and strain‐stress measurements in elongation, respectively. The WAXD and TEM results showed that the clay25A and EG was exfoliated into well‐dispersed sheets in the polymer matrix, especially when the filler concentration were relatively low. This gave rise to considerable improvements in Young's modulus, and resulted in increases in the thermal degradation. It should be possible to convert the EG dispersions obtained thus far to ones yielding filler‐filler networks that show electrical conductivity.     

Hydrophilic nanocomposites based on polyurethane/poly(2‐hydroxyethyl methacrylate) semi‐IPNs and modified/unmodified nanosilica for biomedical applications

Nanocomposites based on sequential semi‐interpenetrating polymer network (semi‐IPN) of cross‐linked polyurethane and linear poly(2‐hydroxyethyl methacrylate) with 0.25 and 3 wt % of nanosilica filler were prepared and investigated. The unmodified silica, carboxyl‐modified, and amino‐modified silica were used in an attempt to control the microphase separation of the polymer matrix by polymer–filler interactions. A variety of experimental techniques were used to study morphology, thermal transitions, mechanical properties, and polymer dynamics of the nanocomposites. Special attention was paid to the investigation of the hydration properties of the nanocomposites in the perspective of biomedical applications. The results show that the good hydration properties of the semi‐IPN matrix are preserved in the nanocomposites. Effects of water on polymer dynamics were found to be particularly pronounced for the secondary β_sw,_PHEMA and the β_PU relaxations, in agreement with interpretations in terms of hydrogen bonding interactions with specific groups in the structure of the two polymers. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 397–408     

Glass transition broadening via nanofiller-contiguous polymer network in aromatic thermosetting copolyester nanocomposites

The glass transition is a genuine imprint of temperature-dependent structural relaxation dynamics of backbone chains in amorphous polymers, which can also reflect features of chemical transformations induced in macromolecular architectures. Optimization of thermophysical properties of polymer nanocomposites beyond the state of the art is contingent on strong interfacial bonding between nanofiller particles and host polymer matrix chains that accordingly modifies glass transition characteristics. Contemporary polymer nanocomposite configurations have demonstrated only marginal glass transition temperature shifts utilizing conventional polymer matrix and functionalized nanofiller combinations. We present nanofiller-contiguous polymer network with aromatic thermosetting copolyester nanocomposites in which carbon nanofillers covalently conjugate with cure advancing crosslinked backbone chains through functional end-groups of constituent precursor oligomers upon an in situ polymerization reaction. Via thoroughly transformed backbone chain configuration, the polymer nanocomposites demonstrate unprecedented glass transition peak broadening by about 100 °C along with significant temperature upshift of around 80 °C. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1595–1603     

Glass transition and relaxation behavior of epoxy nanocomposites

With advances in nanoscience and nanotechnology, there is increasing interest in polymer nanocomposites, both in scientific research and for engineering applications. Because of the small size of nanoparticles, the polymer–filler interface property becomes a dominant factor in determining the macroscopic material properties of the nanocomposites. The glass‐transition behaviors of several epoxy nanocomposites have been investigated with modulated differential scanning calorimetry. The effect of the filler size, filler loading, and dispersion conditions of the nanofillers on the glass‐transition temperature (T_g) have been studied. In comparison with their counterparts with micrometer‐sized fillers, the nanocomposites show a T_g depression. For the determination of the reason for the T_g depression, the thermomechanical and dielectric relaxation processes of the silica nanocomposites have been investigated with dynamic mechanical analysis and dielectric analysis. The T_g depression is related to the enhanced polymer dynamics due to the extra free volume at the resin–filler interface. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3849–3858, 2004     

Reinforcement of recycled PP polymers by nanoparticles incorporation

Recycling process seems to be the most efficient way to reduce ecological impacts of used polymers. Nevertheless, the properties of the recycled PP polymer are proved to be insufficient during its reuse, particularly with regard to its thermo-mechanical and rheological behaviors. The incorporation of nanoparticles as fillers into polymer matrix seems to be one of the most successful solutions to upgrade recycled PP polymer. This paper presents an overview on the application of different nanofillers such as clay, calcium carbonate (CaCO₃), Silica (SiO₂), Zinc Oxide (ZnO), carbon black (CB), carbon nanotubes (CNT), antioxidizers and others into recycled PP matrix. Literature works on the effects of nanofillers on obtained nanocomposites are extensively studied. The first section deals with PP recycling and its impact on thermal, mechanical and rheological properties of the polymer. Then, the second part summarizes recent studies on the effects of nanoparticles incorporation on thermo-mechanical and rheological properties of recycled PP. Finally, recyclability of PP-based nanocomposites is discussed.     

Volume recovery of polystyrene/silica nanocomposites

Macroscopic volume as well as capacitive dilatometry (CD) measurements have been performed on polystyrene/silica nanocomposites during the course of physical aging below the glass transition temperature (T_g). Our results show that the macroscopic volume recovery during physical aging is not affected by the presence of nanofillers, whereas the CD measurements, delivering also information on the polymer matrix density, show acceleration of the recovery with increasing the silica content. Hence, the main outcome of the present work is that the evolution of macroscopic and matrix densities are markedly different in polymer nanocomposites. We interpret these results invoking an equilibration mechanism based on volume holes diffusion. According to this model, excess free volume migration at the polymer/filler interface only modifies the matrix density, thereby explaining the faster recovery detected by CD measurements in comparison to the macroscopic volume one. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys., 2013     

Modification of α-ZrP nanofillers by amines of different chain length: Consequences on the morphology and mechanical properties of styrene butadiene rubber based nanocomposites

An aqueous slurry of α-ZrP lamellar nanofillers has been modified by amine type surfactants. The influence of the alkylamine chain length and of the cationic exchange rate on the nanofiller d-spacing has been analyzed. The strength of the interactions formed between the intercalating agent and the filler has been studied by Infra Red Spectroscopy (FTIR), Solid-state Nuclear Magnetic Resonance (³¹P MAS NMR) and Thermogravimetric Analysis (TGA). Different routes allowing to obtain optimized filler properties while minimizing the surfactant weight amount have been proposed from the detailed analysis of the intercalation mechanism. Styrene Butadiene Rubber nanocomposites have been prepared directly from the different slurries of modified α-ZrP. The dispersion of the organophilic α-ZrP in the SBR matrix has been characterized and the mechanical properties of the corresponding nanocomposites have been determined and discussed as a function of the filler modification, of the nanocomposite morphology and of the filler/matrix interfacial properties.     

Dielectric,mechanical and electro-stimulus response properties studies of polyurethane dielectric elastomer modified by carbon nanotube-graphene nanosheet hybrid fillers

The typical nano-carbon materials, 1D fiber-like carbon nanotubes (CNTs) and 2D platelet-like graphene nanosheets (GRNs), that have attracted tremendous attention in the field of polymer nanocomposites due to their unprecedented properties, are used as conducting filler to induce a considerable improvement in the mechanical, thermal and electrical properties of the resulting graphene/polymer nanocomposites at very low loading contents. This study deals with the preparation and electro-stimulus response properties of polyurethane (PU) dielectric elastomer films with such 1D and 2D nanocarbon fillers embedded in the polymer matrix. The various forms of carbon used in composite preparation include CNT, GRN and CNT-GRN hybrid fillers. Results indicate that the dielectric, mechanical and electromechanical properties depend on the carbon filler type and the carbon filler weight fraction. Here, it has been also established that embedding CNT-GRN hybrid fillers into pristine polyurethane endows somewhat better dispersion of CNTs and GRNs as well as better interfacial adhesion between the carbon fillers and matrix, which results in an improvement in electric-induced strain. Therefore, the nanocomposites seem to be very attractive for microelectromechanical systems applications.     

Improving Thermal and Flame Retardant Properties of Epoxy Resin with Organic NiFe‐Layered Double Hydroxide‐Carbon Nanotubes Hybrids

To improve the dispersion of carbon nanotubes (CNTs) and flame retardancy of layered double hydroxide (LDH) in epoxy resin (EP), organic nickel‐iron layered double hydroxide (ONiFe‐LDH‐CNTs) hybrids were assembled through co‐precipitation. These hybrids were further used as reinforcing filler in EP. EP/ONiFe‐LDH‐CNTs nanocomposites containing 4 wt% of ONiFe‐LDH‐CNTs with different ratios of ONiFe‐LDH and CNTs were prepared by ultrasonic dispersion and program temperature curing. The structure and morphology of the obtained hybrids were characterized by different techniques. The dispersion of nanofillers in the EP matrix was observed by transmission electron microscopy (TEM). The results revealed a coexistence of exfoliated and intercalated ONiFe‐LDH‐ CNTs in polymer matrix. Strong combination of the above nanofillers with the EP matrix provided an efficient thermal and flame retardant improvement for the nanocomposites. It showed that EP/ONiFe‐LDH‐CNTs nanocomposites exhibited superior flame retardant and thermal properties compared with EP. Such improved thermal properties could be attributed to the better homogeneous dispersion, stronger interfacial interaction, excellent charring performance of ONiFe‐LDH and synergistic effect between ONiFe‐LDH and CNTs.     

Investigation of thermally stimulated charge relaxation mechanism in SiO<Subscript>2</Subscript> filled polycarbonate nanocomposites

The thermally stimulated charge relaxation properties of polycarbonate (PC) filled with SiO₂ nanofiller were studied by means of thermally stimulated discharge current (TSDC). The nanocomposite samples were further characterized by UV–vis spectroscopy, scanning electron microscopy, energy dispersive X-ray spectra, and differential scanning calorimetry (DSC) techniques to investigate the dispersion of nanofillers in polymer matrix and glass transition temperature. All pristine and nanocomposites samples of thickness about 25 μm were prepared using solution mixing method. The suitable weight percentage of SiO₂ nanofillers has been chosen to prevent the nonuniform dispersion. TSDC measurement of PC (Pristine) and PC+ (7% SiO₂) shows the single peak, while TSDC characteristic of other nanocomposites are showing two peaks. The higher temperature TSDC peak of pristine and nanocomposites samples is originated due to the charge relaxation from shallower and deeper trapping sites, however, low temperature peak is caused by dipolar relaxation of charge carriers. Since the position of higher temperature TSDC peak is generally an analysis of glass transition temperature of polymer/polymer nanocomposites. The authors have observed that the temperature of this peak is almost same as the T _g measured by DSC with 0 to ±5% variation. This article presents the deeper understanding of charge relaxation mechanism caused by SiO₂ nanofillers in polycarbonate.     

Interfacial interaction in EVA‐carbon nanotube and EVA‐clay nanocomposites

Proper filler‐matrix compatibility is a key factor in view of obtaining nanocomposites with well‐dispersed nanofillers displaying enhanced properties. In this respect, polymer‐filler interaction can be improved by a proper combination of matrix and nanofiller polarities. This is explored for matrices ranging from nonpolar high density poly(ethylene) to ethylene‐vinyl acetate (EVA) copolymers with varying vinyl acetate contents, in combination with several types of organoclay or carbon nanotubes. A novel in situ characterization methodology using modulated temperature differential scanning calorimetry is presented to evaluate the matrix‐filler interaction. During quasi‐isothermal crystallization of the matrix, an “excess” contribution is observed in the recorded heat capacity signal because of reversible melting and crystallization. Its magnitude considerably decreases upon addition of nanofiller in case of strong interfacial interaction, whereas the influence is moderate in case of a less interacting matrix‐filler combination. It is suggested that the “excess heat capacity” can be used to quantify the segmental mobility of polymer chains in the vicinity of the nanofiller. Hence it provides valuable information on the strength of interaction, governed by the physical and chemical nature of matrix and filler. Heating experiments subsequent to quasi‐isothermal crystallization point at a certain degree of molecular ordering, responsible for crystal nucleation in EVA copolymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1291–1302, 2007     

Synthesis and characterization of novel PDMS nanocomposites using POSS derivatives as cross‐linking filler

We report the synthesis and characterization of novel elastomeric nanocomposites containing polyhedral oligomeric silsesquioxanes (POSS) as both the cross‐linker and filler within a polydimethylsiloxane (PDMS) polymer matrix. These polymer composites were prepared through the reaction of octasilane‐POSS (OS‐POSS) with vinyl‐terminated PDMS chains using hydrosilylation chemistry. In addition, larger super‐POSS cross‐linkers, consisting of two pendant hepta(isobutyl)POSS molecules attached to a central octasilane‐POSS core, were also used in the fabrication of the PDMS composites. The chemical incorporation of these POSS cross‐linkers into the PDMS network was verified by solid‐state ¹H magic angle spinning NMR. Based on dynamic mechanical analysis, the PDMS nanocomposites prepared with the octafunctional OS‐POSS cross‐linker exhibited enhanced mechanical properties relative to polymer systems prepared with the tetrafunctional TDSS cross‐linker at equivalent loading levels. The observed improvements in mechanical properties can be attributed to the increased dimensionality of the POSS cross‐linker. The PDMS elastomers synthesized from the larger super‐POSS molecule showed improved mechanical properties relative to both the TDSS and OS‐POSS composites due to the increased volume‐fraction of POSS filler in the polymer matrix. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2589–2596, 2009     

Depth-Dependent Indentation Microhardness Studies of Different Polymer Nanocomposites

Continuous depth sensing indentation microhardness measurements were performed to investigate the effect of filler content and dimensionality on the mechanical behaviour of different polymer nanocomposites. In 1D filler reinforced nanocomposites (such as PP/MWCNT system), both the hardness and the indentation modulus were found to appreciably increase up to a filler weight fraction of 1.6 wt.-%. Further addition of the filler changed the properties only insignificantly. In the nanocomposites with 2D filler (such as in PA6/LS) both the hardness and the indentation modulus increase notably with the addition of the filler and showed intense plasticity. In the investigated systems and composition range, the 3D filler (such as PP/OS2) showed no reinforcing effect at all. In was concluded that the 1D and 2D nanofillers play much more effective reinforcing role to improve the mechanical properties than the 3D fillers.     

A review on the mechanical,electrical and EMI shielding properties of carbon nanotubes and graphene reinforced polycarbonate nanocomposites

Recently, it has been found that carbon nanotubes (CNTs) and graphene could prove to be the most promising carbonaceous fillers in polymers nanocomposites field because of their better structural and functional properties. Their uniform dispersion in polymer matrix leads to significant improvements in their several properties. This paper reviews the effect of nanofillers, ie, CNTs, derivatized CNTs, and graphene on the polycarbonate nanocomposite and its application in aerospace, automobile, sports, electronic sectors, and various industries. The comparative analysis of carbon‐based fillers on the different properties of polycarbonate nanocomposites is also included.     

Influence of nanoparticle surface chemistry on the thermomechanical and magnetic properties of ferromagnetic nanocomposites

The effect of nanoparticle surface chemistry on the thermal, mechanical, and magnetic properties of poly(methyl methacrylate) (PMMA) nanocomposites with cobalt ferrite nanofillers was studied by comparing nanofillers coated with oleic acid (OA; which does not covalently bond to the PMMA matrix) and 3‐methacryloxypropyltrimethoxysilane (MPS, which covalently bonds to the PMMA matrix). Thermogravimetric analysis revealed an increase in the thermal degradation temperature of the nanocomposites compared with the neat polymer. The effect of cobalt ferrite nanofiller on the glass transition temperature (T_g) of the nanocomposite was evaluated by differential scanning calorimetry. The T_g value of the material increased when the particles were introduced. Dynamic mechanical analysis indicated an increase in the storage modulus of the nanocomposite because of the presence of nanofiller and a shift in the peak of loss tangent toward higher temperature. Magnetic measurements indicated that both nanocomposites had a small hysteresis loop at 300 K and no hysteresis at 400 K. However, estimates of the nanofiller's rotational relaxation times and measurements of the zero field cooled temperature‐dependent magnetization indicate that the observed lack of hysteresis at 400 K is likely because of particle rotation in the polymer matrix. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Enhanced dielectric performance of a block copolymer‐polythiophene nanocomposite

Dielectric elastomer actuators (DEAs) transform electrical energy into mechanical work. However, despite displaying exceptional features, the low permittivity of elastomers restricts their application. Hence, to overcome this limitation, DEAs are fabricated by dispersing poly(3‐methylthiophene acetate) (P3TMA), a polarizable conducting polymer, into poly[styrene‐b‐(ethylene‐co‐butylene)‐b‐styrene] (SEBS), a thermoplastic elastomer with excellent mechanical properties. Although high‐quality SEBS:P3TMA films are obtained for all compositions (between 0.5 and 20 wt % P3TMA), their thickness and surface roughness increase with the nano‐sized filler content. Moreover, the conducting particles are well integrated into the SEBS network with no evidence of aggregation or significant change in the mechanical properties of the composites. P3TMA, which forms encapsulated conductive domains within the polymeric matrix, improves the dielectric behavior of SEBS:P3TMA by increasing their dielectric constant with low dielectric losses and no current leakage. Thus, indicating the potential future application of these nanocomposites as elastomer actuators or high energy density capacitors. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1896–1905     

Microbial Polyhydroxyalkanoates Granules: An Approach Targeting Biopolymer for Medical Applications and Developing Bone Scaffolds

Microbial polyhydroxyalkanoates (PHA) are proteinaceous storage granules ranging from 100 nm to 500 nm. Bacillus sp. serve as unique bioplastic sources of short-chain length and medium-chain length PHA showcasing properties such as biodegradability, thermostability, and appreciable mechanical strength. The PHA can be enhanced by adding functional groups to make it a more industrially useful biomaterial. PHA blends with hydroxyapatite to form nanocomposites with desirable features of compressibility. The reinforced matrices result in nanocomposites that possess significantly improved mechanical and thermal properties both in solid and melt states along with enhanced gas barrier properties compared to conventional filler composites. These superior qualities extend the polymeric composites’ applications to aggressive environments where the neat polymers are likely to fail. This nanocomposite can be used in different industries as nanofillers, drug carriers for packaging essential hormones and microcapsules, etc. For fabricating a bone scaffold, electrospun nanofibrils made from biocomposite of hydroxyapatite and polyhydroxy butyrate, a form of PHA, can be incorporated with the targeted tissue. The other methods for making a polymer scaffold, includes gas foaming, lyophilization, sol–gel, and solvent casting method. In this review, PHA as a sustainable eco-friendly NextGen biomaterial from bacterial sources especially Bacillus cereus, and its application for fabricating bone scaffold using different strategies for bone regeneration have been discussed.     

Linear low‐density polyethylene nanocomposites by in situ polymerization using a zirconium‐nickel tandem catalyst system

A series of linear low‐density polyethylene (LLDPE) nanocomposites containing different types of nanofiller (TiO₂, MWCNT, expanded graphite, and boehmite) were prepared by in situ polymerization using a tandem catalyst system composed of {Tp^Ms}NiCl ( 1 ) and Cp₂ZrCl₂ ( 2 ), and analyzed by differential scanning calorimetry, dynamic mechanical analysis (DMA), and transmission electron microscopy (TEM). Based on these analyses, the filler content varied from 1.30 to 1.80 wt %. The melting temperatures and degree of crystallinity of the LLDPE nanocomposites were comparable to those of neat LLDPE. The presence of MWCNT as well as boehmite nucleated the LLDPE crystallization, as indicated by the increased crystallization temperature. The DMA results showed that the presence of TiO₂, EG, and CAM 9080 in the LLDPE matrix yielded nanocomposites with relatively inferior mechanical properties compared to neat LLDPE, suggesting heterogeneous distribution of these nanofillers into the polymer matrix and/or the formation of nanoparticle aggregates, which was confirmed by TEM. However, substantial improvement in the storage modulus was achieved by increasing the sonication time. The highest storage modulus was obtained using MWCNT (1.30 wt %). © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3506–3512