一种热致液晶聚酰胺嵌段共聚物的合成及其表征

以聚三乙二醇双(4-羧苯)醚(PEG3)、邻联甲苯胺和己内酰胺为单体,通过共缩聚的方法合成了一种嵌段共聚物,聚酰胺-酰胺.采用红外光谱仪、核磁、偏光显微镜、差热分析和广角X光衍射对其结构及性能进行了表征.研究表明,这种嵌段共聚物具有液晶性;与缩聚得到的热致聚酰胺液晶(TLCP)相比,共缩聚得到的热致聚酰胺液晶(TLCP-N6)热力学性能发生了改变,在很宽的温度范围内呈向列相,并且在一定条件下可形成固化诱导条带织构和剪切条带织构.     

A novel phosphorus‐containing thermotropic liquid crystalline poly(ester‐imide) with high flame retardancy

A novel phosphorus–nitrogen thermotropic liquid crystalline poly(ester‐imide) (PN‐TLCP) derived from p‐acetoxybenzoic acid (ABA), terephthalic acid (TPA), acetylated 2‐(6‐oxide‐6H‐dibenz<c,e><1,2>oxa phosphorin‐ 6‐yl)‐1,4‐dihydroxy phenylene (DOPO‐AHQ) and N,N'‐hexane‐1,6‐diylbis(trimellitimide) was prepared by melt transesterification. The chemical structure, the mesophase behavior, and the thermal properties of the copolymer were investigated with Fourier transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance spectroscopy (¹H NMR), elemental analysis, wide‐angle X‐ray diffraction (WAXD), hot‐stage polarized light microscopy (PLM), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). PN‐TLCP exhibited a nematic mesophase with a strong birefringence at a low and broad mesomorphic temperature ranging from 220 to 350°C, an initial flow temperature as low as about 190°C and a glass transition temperature of about 160°C. PN‐TLCP has also good thermal stability, high char residues and excellent flame retardancy (limiting oxygen index, LOI = 71 and UL‐94 V‐0 rating). Copyright © 2009 John Wiley & Sons, Ltd.     

A novel thermotropic liquid crystalline copolyester containing phosphorus and aromatic ether moity toward high flame retardancy and low mesophase temperature

A series of thermotropic liquid crystalline polyesters containing phosphorus and aromatic ether groups (TLCP‐AEs) were synthesized from p‐acetoxybenzoic acid (p‐ABA), terephthalic acid (TPA), 4,4′‐oxybis(benzoic acid) (OBBA), and acetylated 2‐(6‐oxid‐6H‐dibenz(c,e) (1,2) oxaphosphorin 6‐yl) 1,4‐benzenediol (DOPO‐AHQ). The chemical structure and the properties of TLCP‐AEs were characterized by Fourier‐transform spectroscopy (FTIR), proton nuclear magnetic resonance spectroscopy (¹H NMR), differential scanning calorimetry (DSC), X‐ray diffraction (XRD), thermogravimetry analysis (TGA), scanning electronic microscopy (SEM), polarizing optical microscopy (POM), limiting oxygen index, and UL‐94 tests, respectively. The results showed that TLCP‐AEs had low and broad mesophase temperatures (230–400 °C). TLCP‐AEs also showed excellent thermal stability; their 5%‐weight‐loss temperatures were above 440 °C and the char yields at 700 °C were higher than 45 wt %. All TLCP‐AE polyesters exhibited high flame retardancy with a LOI value of higher than 70 and UL‐94 V‐0 rating. The SEM observation revealed that TLCP‐AEs had good fibrillation ability. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1182–1189, 2010     

聚芳醚酮与液晶聚酯多嵌段共聚物的合成表征

近年来,以热塑性聚合物为基体,热致液晶聚合物(TLCP)作为增强剂的高分子原位复合材料由于其具有优异的机械性能和优良的成型加工性能,已引起各国工作者的普遍关注和极大兴趣．然而由于自聚集和相分离作用的影响,大部分液晶聚合物与通常的热塑性聚合物基体基本不相容或弱相容,这对于提高原位复合材料的力学性能不利．     

含茋生色团聚醚的合成与热致液晶行为

β 氯乙基缩水甘油醚 (GCE)和GCE/羟丁基乙烯基醚 (HBVE)分别通过阳离子聚合、光引发共聚合 ,获得两种聚醚 ,然后再分别与 4 硝基 4′ 羟基 (NHS)反应 ,制备了两种侧链含生色团的液晶聚合物(PSEG、PSV) .用FTIR、1H NMR和EA对其化学结构及生色团含量进行了表征 ,以POM、DSC、TGA和WAXD对聚合物介晶相转变温度、织构、热稳定性及相行为进行了研究 .结果表明 ,这类聚合物属向列型热致双向性液晶 ,液晶相转变温度较低、范围较宽 ;聚合物热稳定性较好 ,开始分解温度在 30 0℃以上 .     

The synthesis and thermotropic behaviour of an ethyl cellulose derivative containing azobenzene-based mesogenic moieties

An ethyl cellulose derivative containing azobenzene-based mesogenic moieties was prepared by the reaction of 4-methoxyazobenzene-4′-oxyacetic acid and ethyl cellulose by esterification in the presence of N,N′ -dicylcohexylcarbodiimide and 4-dimethylaminopyridine. Its chemical structure and liquid crystalline properties were characterized by FTIR, ¹H NMR, POM, DSC and WAXD. The degree of substitution of the cellulose backbone by the azobenzene-based mesogenic moieties is 0.9. The polymer is thermotropic and exhibits liquid crystalline behaviour over the temperature range 125–172°C.     

Blends of a thermotropic liquid‐crystalline polymer and a poly(butylene terephthalate)/organoclay nanocomposite

Blends were synthesized via the melt blending of a thermotropic liquid‐crystalline polymer (TLCP) and a poly(butylene terephthalate) (PBT) hybrid containing 2 wt % organoclay. A TLCP was also synthesized with side groups based on a nematic liquid‐crystalline phase. The blends of TLCPs with PBT hybrids were melt‐spun with different concentrations of the liquid‐crystalline polymer and different draw ratios (DRs) to produce monofilaments. Regardless of the TLCP concentration in the hybrids, transmission electron microscopy photographs proved that the clay layers of the organoclay were intercalated and partially exfoliated in the PBT matrix. At DR = 1, the maximum enhancement in the ultimate tensile strength was observed for blends containing 8% TLCP, and the tensile strength decreased with further increases in the TLCP concentration. The initial modulus monotonically increased with increasing TLCP concentration. When DR increased from 1 to 44, the increased stretching caused the tensile property to decrease significantly, debonding to occur, and voids to form. These trends with increasing DR were observed in all the systems. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3667–3676, 2004     

Synthesis and characterization of liquid crystalline epoxy and co-polymerisation with a non-mesomorphic epoxy resin

A novel liquid crystalline epoxy resin based on the imine group was synthesised and structurally characterised by infrared (IR) and nuclear magnetic resonance (NMR) spectroscopy. The mesogenic behaviour of the monomer was measured by differential scanning calorimetry (DSC) and polarised optical microscopy (POM), and presented various textures in the extensive temperature range. Methyl nadic anhydride (MNA) was employed to cure the liquid crystalline epoxy resin and the curing process was investigated using POM and wide-angle X-ray diffraction (WAXD). Information about distribution of liquid crystalline epoxy resin in the blending system resulted from the FT-IR Imaging System, indicating that molecules of liquid crystalline epoxy resin can agglomerate to form anisotropic domains. The improvement in mechanical properties of diglycidyl ether of biphenol A (DGEBA) modified with liquid crystalline epoxy was achieved. Scanning electronic microscopy (SEM) showed that an extremely rough and highly deformed fracture surface can be obtained. DGEBA modified with liquid crystalline epoxy resin was characterised by dynamic mechanical analysis (DMA) for its thermal properties. The results indicate that the presence of the liquid crystal phase influences glass transition temperature (Tg).     

一类含萘环结构的聚酯酰亚胺液晶聚合物的结构与性能研究

利用Higashi芳香聚酯直接缩聚法的原理,采用分步投料的方法,以N,N′-1,6-亚己基-双苯偏三酸酰亚胺二酸(IA6)、6-羟基-乙-萘甲酸(HNA)和4,4′-二羟基二苯酮(DHBP)为单体原料,合成了一系列聚酯酰亚胺共聚物.用核磁共振(NMR)、差热分析(DSC)、偏光显微镜(PLM)、广角X射线衍射(WAXD)、热重分析(TGA)等手段对所合成的聚酯酰亚胺的液晶行为、结构以及热性能进行了表征.研究结果表明,当HNA投料量占单体总投料量高于33mol%时,所得聚合物均呈明显的向列型热致液晶特性.但是,此类液晶聚合物仅在升温过程中出现液晶的相转变,而在降温过程中并未观察到液晶的相转变行为.由DSC结果分析可知,此类聚合物具有较高的玻璃化转变温度(Tg)和较低的熔融温度(Tm),有望成为一类既具有较低加工温度又有较高使用温度的液晶聚合物材料.     

Synthesis and Characterization of Thermotropic Liquid Crystalline Poly(ester-imide)s

A series of thermotropic liquid crystalline poly(ester-imide)s was synthesized by melt polymerization of diacetoxynaphthalene acid and n-(ω-carboxyalkylene) trimellitic imides. All polymers with 2,6 substituent positions (n-2,6 PEIM) on the napthalene ring exhibit liquid crystalline phases, whereas polymers with 2,7 substituent positions (n-2,7 PEIM) do not. This result suggests that the kink structure of n-2,7 PEIMS would hinder the formation of liquid crystalline polymer. The copoly(ester-imide)s with an irregular sequence of aliphatic units and aromatic mesogens showed the liquid crystallinity with the lower transition temperatures and a lesser tendency to crystallize than homopoly(ester-imide)s. The semicrystalline polymers with more regular monomeric sequence in the main chain showed the hysteresis of viscoelastic property in the temperature cycle. A nematic glassy copolymer gave the higher molecular orientation to the fiber than a semicrystalline polymer. © 1997 John Wiley & Sons, Ltd.     

Synthesis and characterization of thermotropic liquid crystalline polyurethanes from 4,4′‐bis(6‐hydroxyhexoxy) biphenyl and aliphatic diols

A series of thermotropic liquid crystalline polyurethanes (LCPUs) were synthesized by the polyaddition reactions of 2,4‐toluene diisocyanate (2,4‐TDI) with 4,4′‐bis(6‐hydroxyhexoxy)biphenyl (BHHBP) and aliphatic diol. The intrinsic viscosities of the polymers were measured by Ubbelohde viscometer, and the chemical structure was confirmed by Fourier transform infrared spectroscopy (FT‐IR). The LCPUs were examined by differential scanning calorimetry (DSC), polarized optical microscopy (POM), wide angle X‐ray diffraction (WAXD), and thermogravimetric analysis (TGA). The intrinsic viscosities were 0.56–0.83 dl/g. According to the melting point (T_m) and the isotropic temperature (T_i) of the LCPUs, the temperature range of the liquid crystalline phase became wider with increased number of methylene spacers in the polyurethane. The LCPUs exhibited a nematic phase with a threaded texture and had a wide mesophase temperature range. The decomposition temperature of the LCPUs was >300°C. On WAXD, the LCPUs give a dispersing peak at 2θ ≈ 20°, and a strong diffraction peak at 2θ ≈ 25°. Copyright © 2008 John Wiley & Sons, Ltd.     

Miscibility and crystallization kinetics in blends of poly(ethylene terephtalate) and thermotropic liquid crystal polyesters

Binary blends of poly(ethylene terephtalate) (PET) and thermotropic liquid crystal polyester (TLCP) have been prepared by both solution and melt blending methods. The TLCPs utilized were Vectra (Hoechst Celanese), TR-4, a TLCP synthesized in our laboratory, and a block copolymer consisting of three TR-4 units followed by three PET units. The phase behavior of the blends was studied by differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA) and optical microscopy. The results show that none of the blends is miscible, but significant interactions exist between the PET phase and the TLCP phase in the case of TR-4 and TR-4 block copolymer blends. These interactions lead to a different nucleation mechanism in these blends compared to that in PET/Vectra.     

Block copolymers of telechelic poly(phenylene sulfide) and semiaromatic thermotropic liquid crystalline polyester segments

We report the synthesis and characterization of copolymers comprising poly(phenyl sulfide) (PPS) blocks and semiaromatic thermotropic liquid crystalline polymer (TLCP) blocks. The copolymers, synthesized by melt-transesterification of dicarboxy-terminated poly(phenylene sulfide) with poly(ethylene terephthalate-co-oxybenzoate) (PET/OB), were characterized using Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), X-ray diffraction (XRD), and polarized light optical microscopy (PLOM). The crystallizability and liquid crystalline properties of the copolymers are greatly influenced by the extent of interchange reactions, the mole percent of oxybenzoate with respect to the PET, the PPS : PET/OB weight ratio, and the reaction time. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2707–2713, 1998     

Fiber property and structure development of polyester blend fibers reinforced with a thermotropic liquid‐crystal polymer

Ternary blend fibers (TBFs), based on melt blends of poly(ethylene 2,6‐naphthalate), poly(ethylene terephthalate), and a thermotropic liquid‐crystal polymer (TLCP), were prepared by a process of melt blending and spinning to achieve high‐performance fibers. The reinforcement effect of the polymer matrix by the TLCP component, the fibrillar structure with TLCP fibrils of high aspect ratios, and the development of more ordered and perfect crystalline structures by an annealing process resulted in the improvement of the tensile strength and modulus for the TBFs. An increase in the apparent crystallite size with the spinning speed was attributed to the development of larger crystallites and more ordered crystalline structures in the annealed TBFs. The birefringence and density of the TBFs increased with increasing spinning speed, the TBFs becoming more oriented and the crystal packing becoming more enhanced. The molecular orientation was an important factor in determining the tensile strength and modulus of the TBFs. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 395–403, 2004     

Formation of a metastable phase induced by a liquid crystalline phase in a novel chloropoly(aryl ether ketone)

The phase transition behavior of a thermotropic liquid crystalline poly(aryl ether ketone) synthesized by nucleophilic substitution reactions of 4,4′‐biphenol (BP), and chlorohydroquinone (CH) with 1,4‐bis(4‐fluorobenzoyl)benzene (BF) has been investigated by differential scanning calorimetry (DSC) and wide angle X‐ray diffraction (WAXD). The copolymer exhibits multiple first order phase transitions, which are associated with crystal‐to‐smectic liquid crystal transition and smectic liquid crystal‐to‐isotropic transition. When the cooling rate is low (< 10°C/min), only stable crystal form I is formed. With the cooling rate being high (>20°C/min), the metastable crystal form II is formed, which always coexists with form I. The liquid crystalline phase plays an important role in the formation of metastable phase form II.     

LC-Polyimides. XIX. Chiral and thermotropic poly(esterimide)s based on N-(4′-caboxyphenyl)trimellitimide and novel chiral spacers

Starting from commercial S- or R-3-bromo-2-methylpropanol, several new spacer diols were prepared. These spacers were polycondensed with the acid chloride of N-(4′-carboxyphenyl)trimellitimide. The resulting poly(ester-imide)s were characterized by elemental analyses, viscosity measurements, ¹H-NMR spectroscopy, DSC- and WAXD-measurements and optical microscopy. The poly(ester-imide)s derived from chiral, aliphatic spacers form layer structures in the solid state, but no liquid crystalline phase. With nonsymmetrical, nonchiral semialiphatic spacers, poly(ester-imide)s were obtained, which form a smectic E or H phase in the solid state, a smectic-A or -C phase in the melt, and a nematic phase, when the spacer possesses an odd number of CH₂ groups. The polycondensation of a chiral semialiphatic spacer yielded thermotropic poly(ester-imide)s with either S- or R-configuration. WAXD patterns measured with synchrotron radiation at various temperatures proved that a layer structure exists in the solid state (smectic-E^* or H^*) and a chiral smectic-A^* or -C^* phase plus a cholesteric phase in the melt. A 1 : 1 blend of the S- and R-polyesters was also studied, but did not show unusual features. © 1995 John Wiley & Sons, Inc.     

热致液晶PEI与PES—C共混物的研究

通过熔融共混,制备不同配比（２．５／９７．５－７５／２５）的ＰＥＩ／ＰＥＳ－Ｃ共混物,使用ＷＡＸＤ、ＤＳＣ、锥板流变仪、力学性能测试、ＳＥＭ等方法对共混物进行了研究。共混后强度、模量均有提高,在高剪切速率下,共混物的粘度有所降低。扫描电镜照片显示,共混物具有“皮芯”结构。     

含偶氮苯生色团的聚醚的合成与热致液晶性质

β－氯乙基缩水甘油醚（ＧＣＥ）和ＧＣＥ／羟丁基乙烯基醚（ＨＢＶＥ）分别通过阳离子聚合、光引发共聚合,获得两种聚醚,然后再分别与４－硝基－４’－羟基偶氦苯（ＮＨＡ）反应,制备了两种侧链含偶氦苯生色团的液晶聚合物（ＰＡＥＧ、ＰＡＶ）。用ＦＴＩＲ、＾１Ｈ－ＮＭＲ和ＥＡ对其化学结构及生色团含量进行了表征,以ＰＯＭ,ＤＳＣ、ＴＧＡ和ＷＡＸＤ对聚合物介晶相转变温度、织构、热稳定性及相行为进行了研究。结果表明,     

Thermotropic liquid crystalline polyester nanocomposites via in situ intercalation polycondensation

A thermotropic liquid crystalline polyester (TLCP)/organoclay nanocomposite was synthesized via in situ intercalation polycondensation of diethyl‐2,5‐dihexyloxyterephthalic acid and 4,4′‐biphenol in the presence of organically modified montmorillonite (MMT). The organoclay, C18‐MMT, was prepared by the ion exchange of Na⁺‐MMT with octadecylamine chloride (C18‐Cl^?). TLCP/C18‐MMT nanocomposites were prepared to examine the variations of the thermal properties, morphology, and liquid crystalline phases of the nanocomposites with clay content in the range of 0–7 wt%. It was found that the addition of only a small amount of organoclay was sufficient to improve the thermal behavior of the TLCP hybrids, with maximum enhancement being observed at 1 wt% C18‐MMT. Copyright © 2008 John Wiley & Sons, Ltd.     

Organoclay/thermotropic liquid crystalline polymer nanocomposites. III. Effects of fully exfoliated organoclay on morphology,thermal, and rheological properties

A fully exfoliated organoclay in thermotropic liquid crystalline polymer (TLCP) based nanocomposite was prepared by a method combining ultrasonication, centrifugation, solution casting, and heat‐shearing separation. Morphological study showed that the organoclays of 15–25 nm in size dispersed uniformly in TLCP with fully exfoliated structures. The organoclays formed molecular level interactions with TLCP molecules. The interactions did not affect the liquid crystallinity and mesophase structure of TLCP, but they affected the thermal stability and thermal properties of TLCP, increasing the thermal stability and shifting the transition temperatures to the higher ends. Mechanical rheology investigations in the linear viscoelastic region showed that with the exfoliated organoclay in TLCP, more obvious pseudosolidlike behavior appeared in the terminal region. The rigidity of TLCP was enhanced by the presence of the exfoliated organoclay with percolated structures in the TLCP matrix. In steady shear tests, the nanocomposite had the similar shear viscosity and N1 (the first normal stress difference) to those of TLCP in the steady state condition. Percolated structures were easily destroyed by sufficient shear strain and the exfoliated organoclays were oriented along the shear direction, even assisting the neighboring TLCP molecules to align in the flow direction, resulting in a decrease of viscosity and an increase of the N1 slope. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 712–720, 2010