左旋多巴和N,N-二甲基亚砜共掺杂PEDOT:PSS作为空穴传输层的高性能p-i-n型钙钛矿太阳能电池

在p-i-n型的钙钛矿太阳能电池中,聚3, 4-乙烯二氧噻吩：聚苯乙烯磺酸盐(PEDOT:PSS)作为最常用的空穴传输层(HTL)材料之一,由于其存在着吸湿性强以及能级与钙钛矿层不匹配等缺点,限制了它的应用。基于此,本文拟采用将左旋多巴(DOPA)和N, N-二甲基亚砜(DMSO)共同掺杂于PEDOT:PSS作为HTL的简单方法制备高性能p-i-n型钙钛矿太阳能电池。研究结果表明,DOPA和DMSO共掺杂PEDOT:PSS可以有效的调节HTL的能级并提高其导电性,器件的能量转化效率由13.35%显著提高到了17.54%。进一步研究发现,相比于未掺杂或单一掺杂的PEDOT:PSS,在DOPA和DMSO共掺杂的PEDOT:PSS上更有利于生长大尺寸、高结晶度的钙钛矿晶体;同时稳态/瞬态荧光和交流阻抗测试表明器件的内部载流子分离和传输更加有效。     

Effects of different formulation PEDOT:PSS hole transport layers on photovoltaic performance of organic solar cells

In this study, the effects of the various types of PEDOT:PSS with different conductivities on the photovoltaic parameters of organic solar cells were investigated. The performances of five various commercially available PEDOT:PSS with formulations such as FET, PT2, PH1000, PH500 and PH were compared. It was observed that the device employing PH1000 as an interlayer between ITO and the active layer exhibited the highest photovoltaic performance as compared to other devices with FET, PT2, PH500 and PH. Copyright © 2015 John Wiley & Sons, Ltd.     

掺杂PEDOT：PSS空穴传输层在钙钛矿太阳能电池中的应用

钙钛矿太阳能电池(PSCs)因易于制备、生产成本低和能量转换效率高而受到广泛关注。聚乙撑二氧噻吩-聚(苯乙烯磺酸盐)(PEDOT∶PSS)由于具有易低温加工、透光度高和适宜空穴迁移率等特点而成为PSCs中空穴传输层的研究热点。本文简述了倒置PSCs的结构及工作原理,重点介绍了掺杂PEDOT∶PSS空穴传输层在PSCs领域的研究现状。分别从有机化合物掺杂剂、无机化合物掺杂剂和表面活性剂掺杂剂三个类别概述了掺杂PEDOT∶PSS空穴传输层对PSCs性能的影响。最后,对该领域存在的问题提出潜在措施以改善PEDOT∶PSS掺杂层在PSCs中的应用。     

氧化石墨烯掺杂PEDOT:PSS作为空穴注入层对有机发光二极管发光性能的影响

研究了氧化石墨烯(GO)掺杂聚(3,4-亚乙二氧基噻吩):聚(苯乙烯磺酸) (PEDOT:PSS)作为空穴注入层对有机发光二极管发光性能的影响. 在PEDOT:PSS水溶液中掺入GO, 经过湿法旋涂和退火成膜后, 不仅提高了空穴注入层的空穴注入能力和导电率, 透光率也得到了相应的提高, 从而使得有机发光二极管(OLED)器件的发光性能得到了提升. 通过优化GO掺杂量发现, 当GO掺杂量为0.8%(质量分数)时, 空穴注入层的透光率达到最大值(96.8%), 此时获得的OLED器件性能最佳, 其最大发光亮度和最大发光效率分别达到17939 cd·m^-2和3.74 cd·A^-1. 与PEDOT:PSS 作为空穴注入层的器件相比, 掺杂GO后器件的最大发光亮度和最大发光效率分别提高了46.6%和67.6%.     

Organic Photovoltaic Cells with Improved Performance Using Bathophenanthroline as a Buffer Layer

The role of bathophenanthroline (Bphen) as a buffer layer inserted between fullerene (C₆₀) and Ag cathode in organic photovoltaic (OPV) cell was discussed. By introducing Bphen as a buffer layer with thicknes from 0 to 2.5 nm, the power conversion efficiency of the OPV cell based on copper phthalocyanine (CuPc) and C₆₀ was increased from 0.87% to 2.25% under AM 1.5 solar illumination at an intensity of 100 mW/cm², which was higher than that of bathocuproine used as a buffer layer. The photocurrent-voltage characteristics showed that Bphen effectively improves electron transport through C₆₀ layer into Ag electrode and leads to balance charge carrier transport capability. The influence of Bphen thickness on OPV cells was also investigated. Furthermore, the absorption spectrum shows that an additional Bphen layer enhances the light harvest capability of CuPc/C₆₀.     

Paper: An effective substrate for the enhancement of thermoelectric properties in PEDOT:PSS

A novel strategy via paper as an effective substrate has been introduced as a thermoelectric material in this work. Free‐standing poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS)/paper composite films are conveniently prepared by a one‐step method of directly writing PEDOT:PSS solution on paper, making the process simple, rapid, and facile. The free‐standing composite films display excellent flexibility, light weight, soaking stability in water, and great potential in large‐scale production. Improved thermoelectric properties are obtained in PEDOT:PSS/paper composite films, owing to the simultaneously enhanced Seebeck coefficient (30.6 μV K^?1) and electrical conductivity, and a low thermal conductivity (0.16 W m^?1 K^?1) compared with pristine PEDOT:PSS films. The results indicate that paper as an effective substrate is suitable for the preparation of high‐performance and flexible thermoelectric materials. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 737–742     

Novel Hyperbranched Phthalocyanine as a Hole Injection Nanolayer in Organic Light‐Emitting Diodes

A novel organic hyperbranched copper phthalocyanine was synthesized for use as a hole injection nanolayer on ITO in organic light‐emitting diodes (OLEDs). This material is soluble in organic solvents which allows for processing under anhydrous conditions, unlike water based conventional polymer hole injection layer materials such as poly(3,4‐ethylenedioxythiophene)(PEDOT)/polystyrene sulfonate (PSS). The hyperbranched layer increased the luminous efficiency and brightness of single layer OLED devices, in addition to reducing current leakage which causes crosstalk in panel devices, compared to devices prepared from PEDOT/PSS. Therefore, this material is more suitable for OLED applications due to its processing and performance advantages over conventional commercial conducting polymer compositions.

     

Fast Visible-Light 3D Printing of Conductive PEDOT:PSS Hydrogels

Functional inks for light-based 3D printing are actively being searched for being able to exploit all the potentialities of additive manufacturing. Herein, a fast visible-light photopolymerization process is showed of conductive PEDOT:PSS hydrogels. For this purpose, a new Type II photoinitiator system (PIS) based on riboflavin (Rf), triethanolamine (TEA), and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) is investigated for the visible light photopolymerization of acrylic monomers. PEDOT:PSS has a dual role by accelerating the photoinitiation process and providing conductivity to the obtained hydrogels. Using this PIS, full monomer conversion is achieved in less than 2 min using visible light. First, the PIS mechanism is studied, proposing that electron transfer between the triplet excited state of the dye (³Rf*) and the amine (TEA) is catalyzed by PEDOT:PSS. Second, a series of poly(2-hydroxyethyl acrylate)/PEDOT:PSS hydrogels with different compositions are obtained by photopolymerization. The presence of PEDOT:PSS negatively influences the swelling properties of hydrogels, but significantly increases its mechanical modulus and electrical properties. The new PIS is also tested for 3D printing in a commercially available Digital Light Processing (DLP) 3D printer (405 nm wavelength), obtaining high resolution and 500 µm hole size conductive scaffolds.     

An effective approach to enhanced thermoelectric properties of PEDOT:PSS films by a DES post‐treatment

As conventional organic solvents present inherent toxicity, deep eutectic solvents (DES) have been considered as excellent candidates due to their green characteristics. In this work, thermoelectric properties enhancement of PEDOT:PSS films is achieved by introducing DES as an additive and post‐treatment reagent. Direct addition and post‐treatment approaches lead to a maximum Seebeck coefficient of 29.1 μV K^?1 and electrical conductivity of 620.6 S cm^?1, respectively. In addition, an optimal power factor is obtained by DES post‐treatment, reaching up to 24.08 μW m^?1 K^?2, which is approximately four orders of magnitude higher than the pure PEDOT:PSS. Assuming a thermal conductivity of 0.17 W m^?1 K^?1, the maximum ZT value is estimated to be 0.042 at 300 K. Further, atomic force microscopy and X‐ray photoelectron spectroscopy are performed and suggest that the remarkably enhanced electrical conductivity originates from the removal of the excess insulating PSS and the phase separation between the PEDOT and PSS chains. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 885–892     

Influence of imidazole‐based acidity control of PEDOT:PSS on its electrical properties and environmental stability

Poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) has been studied for a wide range of applications due to its potential as a transparent electrode. Herein, the use of imidazole and its derivatives as a neutralizing additive for PEDOT:PSS dispersion and in‐depth studies of their effects in terms of electrical properties and stability is reported. Although the neutralization in general reduces the electrical conductivity of PEDOT:PSS, the conductivity after imidazole treatment (685.2 S cm^?1) is higher than that after treatment of other derivatives. Spectroscopic and thermoelectric studies show that the de‐doping effect resulted in the conductivity reduction. As a trade‐off of the conductivity reduction, greatly enhanced long‐term stability and noncorrosive characteristics are obtained after neutralization. The change in sheet resistance of imidazole‐treated PEDOT:PSS after 500 h under harsh conditions (85 °C and 85% humidity) is half that of the untreated samples, demonstrating the great enhancement of the stability. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1530–1536     

Ti3C2Tx-Modified PEDOT:PSS Hole-Transport Layer for Inverted Perovskite Solar Cells

PEDOT:PSS is a commonly used hole-transport layer (HTL) in inverted perovskite solar cells (PSCs) due to its compatibility with low-temperature solution processing. However, it possesses lower conductivity than other conductive polymers and metal oxides, along with surface defects, limiting its photovoltaic performance. In this study, we introduced two-dimensional Ti₃C₂T_x (MXene) as an additive in the PEDOT:PSS HTL with varying doping concentrations (i.e., 0, 0.03, 0.05, and 0.1 wt.%) to tune the electrical conductivity of PEDOT:PSS and to modify the properties of the perovskite film atop it. We noted that the grain size of the CH₃NH₃PbI₃ (MAPI₃) perovskite layer grown over an optimal concentration of MXene (0.03 wt.%)-doped PEDOT:PSS increased from 250 nm to 400 nm, reducing charge recombination due to fewer grain boundaries. Ultraviolet photoelectron spectroscopy (UPS) revealed increased work function (WF) from 4.43 eV to 4.99 eV with 0.03 wt.% MXene doping, making the extraction of holes easier due to a more favorable energy level alignment with the perovskite. Quantum chemical investigations based on density functional theory (DFT) were conducted at the ωB97XD/6-311++G(d,p) level of theory to provide more insight into the stability, bonding nature, and optoelectronic properties of the PEDOT:PSS–MXene system. The theoretical investigations revealed that the doping of PEDOT:PSS with Ti₃C₂T_x could cause a significant effect on the electronic properties of the HTL, as experimentally demonstrated by an increase in the electrical conductivity. Finally, the inverted PSCs employing 0.03 wt.% MXene-doped PEDOT:PSS showed an average power conversion efficiency (PCE) of 15.1%, up from 12.5% for a reference PSC employing a pristine PEDOT:PSS HTL. The champion device with a 0.03 wt.% MXene–PEDOT:PSS HTL achieved 15.5% PCE.     

Role of Layer-by-Layer Deposition on Electrical and Optical Properties of PEDOT: PSS/Polyaniline Thin Films for Solar Cells

In this article, electrical and optical properties of PEDOT:PSS/Polyaniline: (PANI)bilayer thin films deposited on indium tin oxide (ITO) are reported. Spin coater has been used for fabrication of thin films of 40–50 nm thickness at 5000 rpm. The deposited thin films have been characterized by using Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), UV-vis spectroscopy and Keithley electrometer. Layer-by-layer (LBL) technique has been shown to produce electroactive polymer films with low roughness, excellent uniformity, and high electrical conductivity for heterojunction solar cells. The electrical response of fabricated films showing ohmic behavior for PEDOT: PSS/PANI thin films.     

Photolithographic patterning of highly conductive PEDOT:PSS and its application in organic light‐emitting diodes

Photolithographically patterned highly conductive (～1400 S/cm) poly(3,4‐ethylenedioxythio‐phene):poly(styrenesulfonate) (PEDOT:PSS) films are demonstrated as electrodes for organic light emitting diodes (OLEDs). With the assistance of hydrofluoroether (HFE) solvents and fluorinated photoresists, high‐resolution passive‐matrix OLEDs with PEDOT:PSS electrodes are fabricated, in which the OLEDs show comparable performance to those devices prepared on the indium tin oxide (ITO) electrodes. This photolithographic patterning process for PEDTO:PSS has great potential for applications which require flexible electrodes. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1221–1226     

Layer‐by‐Layer Spin Self‐Assembled Hole Injection Layers Containing a Perfluorinated Ionomer for Efficient Polymer Light‐Emitting Diodes

Deposition of hole injection layers including a perfluorinated ionomer has been demonstrated using layer‐by‐layer spin self‐assembly for enhanced device efficiency and lifetime in PLEDs. We show that the LBL spin self‐assembled thin films enable to control work functions of indium‐tin oxide anodes by changing the PFI concentration and that a resulting green‐emitting device has an enhanced luminescence efficiency and 18 times longer half lifetime than a device using a conventional HIL. We also fabricate a gradient of energy levels by the LBL self‐assembly of the PFI that results in a work function of 5.74 eV, which can be used to improve carrier injection even for an emitting layer whose ionization potential is over 5.7 eV.

     

一种非线性结构空穴传输材料的合成及其光伏性能研究

以三苯胺为电子给体单元,4-叔丁基-甲氧基苯环为母核,设计合成了1种非线性“Y型”结构的空穴传输材料（2TPA-ph-tbyl）。光电化学测试结果表明该材料与钙钛矿材料能级匹配。单晶X射线衍射结果表明,该分子通过端位基团三苯胺形成分子间C-H/π相互作用。这种较强的侧链堆积作用使2TPA-ph-tbyl获得了3.13× 10-5 cm2 V-1 s-1的空穴迁移率,是商用空穴传输材料PEDOT：PSS的1.5倍。将其制备成倒置结构钙钛矿太阳能电池,开路电压达到1000 mV、短路电流密度为21.53 mA?cm-2,填充因子为0.71,其光电转换效率达到15.2%,高于PEDOT：PSS（13.7%）。稳态光致发光和阻抗测试表明,2TPA-ph-tbyl可以促进钙钛矿-空穴传输材料界面电荷传输,降低界面电荷复合,从而提高电池的开路电压和短路电流。上述结果表明,具有非线性结构的空穴传输材料可以通过增强分子间的侧链堆积效应,提高材料的空穴迁移率,进而提高电池的光电转换效率。     

碘化铅作为空穴传输层在P3HT:PC61BM聚合物太阳能电池中的增强效果

开发了一类新型阳极界面缓冲材料PbI₂,制备了结构为ITO/PbI₂/P3HT:PC₆₁BM/Al(氧化铟锡导电玻璃/碘化铅/聚三已基噻吩:富勒烯衍生物/铝)的器件,制备工艺包括旋涂和蒸镀,考察了PbI₂在聚合物太阳能电池原型器件ITO/P3HT:PC₆₁BM/Al中的效果。不同碘化铅浓度,退火温度,退火时间,对PbI₂薄膜的质量都会有影响。很显然,高质量的PbI₂薄膜将会带来好的光电转化效率。PbI₂薄膜的透光性,结晶性,以及表面形貌可以用来描述所成薄膜的质量好坏。对能带来最好性能的碘化铅薄膜进行了紫外-可见光谱,X射线粉末衍射(XRD),原子力显微镜(AFM),扫描电子显微镜(SEM)等表征。实验发现,太阳能电池器件的效率对PbI₂浓度比较敏感,最优化的条件为,旋涂浓度为3 mg·mL^-1,100 ℃退火30 min,其电池的开路电压(V_oc)达到0.45 V,短路电流密度(J_sc)为7.9 mA·cm^-2,填充因子(FF)为0.46,与没有界面缓冲材料的器件相比,光电转换效率(PCE)由0.85%提高到1.64%。     

Highly Conductive PEDOT:PSS Films with 1,3‐Dimethyl‐2‐Imidazolidinone as Transparent Electrodes for Organic Light‐Emitting Diodes

Highly conductive poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) films as transparent electrodes for organic light‐emitting diodes (OLEDs) are doped with a new solvent 1,3‐dimethyl‐2‐imidazolidinone (DMI) and are optimized using solvent post‐treatment. The DMI doped PEDOT:PSS films show significantly enhanced conductivities up to 812.1 S cm⁻¹. The sheet resistance of the PEDOT:PSS films doped with DMI is further reduced by various solvent post‐treatment. The effect of solvent post‐treatment on DMI doped PEDOT:PSS films is investigated and is shown to reduce insulating PSS in the conductive films. The solvent posttreated PEDOT:PSS films are successfully employed as transparent electrodes in white OLEDs. It is shown that the efficiency of OLEDs with the optimized DMI doped PEDOT:PSS films is higher than that of reference OLEDs doped with a conventional solvent (ethylene glycol). The results present that the optimized PEDOT:PSS films with the new solvent of DMI can be a promising transparent electrode for low‐cost, efficient ITO‐free white OLEDs.

     

Control of Thickness of PEDOT Electrodeposits on Glass/ITO Electrodes from Organic Solutions and its Use as Anode in Organic Solar Cells

Poly-ethylendioxythiophene (PEDOT) was electropolymerized from the monomer EDOT in acetonitrile (ACN) containing Bu₄N⁺ClO₄^-, BF₄^- or PF₆^- ions as supporting electrolyte. The electrode used was transparent electrodes (Glass/ITO) in order to generate the anode of an organic solar cell (OSC). Potentiodynamic and potentiostatic electropolymerization techniques were used to make the conducting polymer deposits (E-PEDOT), which were obtained as a thin film onto the ITO surface. It was possible to control the thickness of the electrodeposited films in the range of 15 to 200 nm measured by AFM. With the thinner films (until 100 nm), it was observed that its absorbance at 700 nm was linearly dependent with their thickness and it was possible to obtain an equation that was used to measure the films thickness of future experiments. The E-PEDOT films were successfully used for constructing OSC's and the efficiency values found were equivalent or slightly superior to those found with the classical PEDOT:PSS anode.     

2种三聚茚基三芳胺染料的合成及其光伏性能

以三聚茚基三芳胺为给电子单元,以绕单宁-3-乙酸为受电子单元,设计合成了2种三聚茚基三芳胺染料六乙基三聚茚胺饶丹宁乙酸(MXD8)和六乙基三聚茚胺环氧噻吩饶丹宁乙酸(MXD9)。 光学测试表明,该类染料光谱响应范围宽,摩尔吸光系数高。 结合2种染料的紫外-可见光谱和循环伏安曲线,确定了染料的电子基态和激发态能级位置。 结果表明,2种染料的能级位置符合染料敏化太阳能电池的要求。 将它们用作染料敏化太阳能电池中的光敏化剂,在AM1.5-100×10-3 W/cm2的光强下,MXD8敏化电池的开路电压(VOC)为614 mV,短路电流密度(JSC)为5.76×10-3 A/cm2,填充因子(FF)为0.66,总光电转换效率为2.33%。 尽管MXD9引入3,4乙撑二氧噻吩作为共轭桥,其光电转换效率却较MXD8低（1.27%）。 阻抗测试表明,MXD9光电转换效率较低的原因主要是电子更容易复合。 该结果表明,电子复合可能与分子共轭体系增大导致极化率增加有关。     

Synthesis and characterisation of poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) Zr(IV) monothiophosphate composite cation exchanger: analytical application as lead ion selective membrane electrode

A Pb²⁺ ion selective membrane electrode based on poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) Zr(IV) monothiophosphate composite cation exchange material was fabricated using solution casting method. The effect of membrane composition on the proton exchange capacity was investigated by using varying amounts of electroactive material. The membrane with 250 mg of electroactive material and 10 µL of plasticiser exhibited higher proton conductivity. The optimised membrane composition was used for the fabrication of ion selective membrane electrode which exhibited typical Nernstian response towards Pb²⁺ ions in the concentration range 20.70 gL^?1–20.7 µgL^?1 (1 × 10^–1–1 × 10^–7 mol L^?1) with a sub-Nernstian slope of 27.429 mV per decade change in Pb²⁺ ion concentration. The response time of the electrode under study for Pb²⁺ ions was found to be 11 s and the electrode can be used for 120 days without any considerable divergence in response potential. It can also be successfully used in the pH range from 3.0 to 6.5. It was found selective for Pb²⁺ ions in the presence of various monovalent, divalent and trivalent interfering metal ions. It was also employed as an indicator electrode in the potentiometric titration of Pb²⁺ ions using ethylenediaminetetraacetic acid, disodium salt, as a titrant.