冠醚配合物的研究XIII:三种大环配体液膜传输碱金属离子的动力学

本文报道以2,3-苯并-11-甲基-18-冠-6,2,3-苯并-8,15-二甲基-18-冠-6和2,3-苯并-8-11,15-三甲基-18-冠-6为液膜载体,研究其对碱金属离子的传输,发现当水相金属盐浓度和膜相配体相近时,金属离子的传输为串联一级反应,求得了串级速率常数,并讨论了传输速率和配位作用的关系及载体结构的影响.     

Studies on the Complexation of Transition Metal Ions with Macrocyclic Compounds in Mixed Solvents by Competitive Potentiometry and Polarography

Complexation of Cu(II), Zn(II), Ni(II), Co(II), Pb(II), Cd(II), Cr(III) and Fe(III) ions with 15-crown-5, benzo-15-crown-5, 18-crown-6, dibenzo-18-crown-6, dicyclohexano-18-crown-6, dibenzo-24-crown-8, 5,6,14,15-dibenzo-1,4-dioxa-8,12-diazacyclopentadeca-5,14-diene, 1,4,10-trioxa-7,13-diazacyclopentadecane and cyclam has been investigated in 75% (v/v) DMF+water using the silver(I) ion as an auxiliary cation at 0.05?M ionic strength adjusted with tetrabutylammonium perchlorate (TBAP) by competitive potentiometry. Stability constant values obtained for the metal ion–aza macrocyclic complexes are higher than those for the oxa crowns. Shifts in the peak potential and reduction in the peak current in the differential pulse polarography (DPP) method were also used to determine the stability constants of some of the metal ions with aza and tosylated-aza macrocycles using TBAP as supporting electrolyte in 75% (v/v) DMF+water and 90% (v/v) DMSO+water media. Stability constant values determined both by shifts in the potential and by reduction in the peak current were found to be in good agreement with each other.     

Apparent molar volumes of crown ether complexes in several solvents at 25°C. An estimation of ionic electrostriction

The apparent molar volumes of equimolar concentrations of 18-crown-6-ether (CE) or dibenzo-18-crown-6-ether (B₂CE) and MCl (M=Na, K, or Cs) or MI in dilute solutions of anhydrous methanol, acetonitrile and dimethylsulfoxide have been calculated from density data measured at 25°C. After extrapolation to infinite dilution these results together with the apparent molar volumes of the crown ethers and the alkali metal halides were used to calculate the limiting partial molar volume change for the formation of the complexes. By noting that the charge of the complexed cation has been shown to be completely shielded from the solvent, the volume of complexation can be assumed to be a good estimation of the volume change due to electrostriction of the solvent by the cationic charge. The results are compared to the predictions of the Hepler equation.Presented at the Symposium on Electrochemistry and Spectroscopy of Solutions, Honoring Johannes Coetzee, University of Pittsburgh, November 30, 1989.On leave from Rhodes University, Grahamstown, South Africa.     

A new synthetic route to polycarbonate

A detailed study has been carried out on the new synthetic reaction of poly(p-xylylene carbonate) from potassium carbonate and p-xylylene dibromide by using a variety of crown ethers as a catalyst, which was recently found by the present authors. Crown ethers having 18-member ring showed the best catalytic property of the various crown ethers, and the reaction was conducted in various solvents at 50–160°C by using 18-crown-6-ether. Both the polymer yield and the molecular weight of the polymer increased in proportion to the amount of potassium carbonate, and they increased rapidly and reached constant values with increasing the concentration of 18-crown-6-ether. They also depended significantly upon the reaction temperature as well as the solvent used. A maximum yield with the highest molecular weight was obtained from the reaction at 100–120°C in diglyme solvent. The spectroscopic analysis of the polymer indicated that all the end groups of the resulting polymer had the structure of benzyl bromide. From these results, a plausible mechanism was proposed for the reaction. Similar reactions were also conducted by using several aliphatic dibromides, Br? (CH₂)_x? Br, in place of p-xylylene dibromide. The products were strongly dependent of the value of x: polycarbonate was obtained from dibromides with ≧4, and cyclic carbonates from dibromides with ≦3.     

Spectrophotometric Study of the Complexation of Some Lanthanide (III) Ions with a Series of 18-Crowns-6 in DMSO Solution Using Murexide as a Metallochromic Indicator

The complexation of La(III), Ce(III), Pr(III) and Er(III) with 18-crown-6(18C6), dibenzo-18-crown-6 (DB18C6), dicyclohexano-18-crown-6 (DCY18C6) anddibenzopyridino-18-crown-6 (DBPY18C6) has been studied in dimethylsulfoxide(DMSO) by means of a competitive spectrophotometric method using murexide asa metal ion indicator. The formation constants of the 1 : 1 complexeswere found tovary in the order La(III) > Ce(III) > Pr(III) > Er(III). It was foundthat the structure influences the formation and stability of the resultingcomplexes. The effects ofvarious parameters on complexation are discussed. The order of the stabilityconstants of each lanthanide ion with these macrocycles are18C6 > DC18C6 > DB18C6 > DBPY18C6.     

The lead(II) complexes with 18-Crown-6, 1,1,1,5,5,5-hexafluoropentane-2,4-dionate and 1,1,1-trifluoropentate-2,4-dionate anions: Synthesis,structure, and thermochemical properties

The complexes trans-[Pb(18-crown-6)(NO₃)₂] (I), trans-[Pb(18-crown-6)(Hfa)₂] (II), and [Pb₂(18-crown-6)(Tfa)₄] (III), where Hhfa is 1,1,1,5,5,5-hexafluoropentane-2,4-dione and Htfa is 1,1,1-trifluoropentane-2,4-dione, were synthesized and identified. The structures of crystals I–III were determined by X-ray diffraction, whereas the melting and decomposition of compounds II, III were studied by the differential scanning calorimetry. The temperature of preparative sublimation of complexes II, III was determined at 10^?2 mm Hg. The semiempirical structural-thermochemical approach was used to analyze the parameters of complex II vaporization.     

A ferric-cyanide-bridged one-dimensional dirhodium complex with (18-­crown-6)­potassium cations

The crystal structure of the title compound, catena-poly[bis[aqua(18-crown-6)­potassium] di­aqua(18-crown-6)­potassium [[tetra-μ-benzoato-2:3κ⁸O:O′-μ-cyano-1:2κ²C:N-tetra­cyano-1κC-irondirhodium(Rh—Rh)]-μ-cyano-1κC:3′κN] octahydrate], [K(18-crown-6)(H₂O)]₂[K(18-crown-6)(H₂O)₂]­[FeRh₂(C₇H₅O₂)₄(CN)₆]·8H₂O, where (18-crown-6) is 1,4,7,10,13,16-hexaoxa­cyclo­octa­decane (C₁₂H₂₄O₆), has been determined. Ferric cyanides connect the dirhodium units to form a one-dimensional chain compound. [K(18-crown-6-ether)(H₂O)₂] cations (with inversion symmetry) and [K(18-crown-6-ether)(H₂O)] cations (in general positions) are located between the chains.     

Selective recognition and electrochemical sensing of dopamine using a ferrocene-based heteroditopic receptor

A redox-active ferrocene-based heteroditopic receptor bearing a boronic acid (as a catechol recognition site) and a benzo-18-crown-6-ether unit (as an ammonium ion recognition site) was synthesized. A 1:1 ditopic complex with dopamine was evidenced by mass spectrometry and NMR spectroscopy. Cyclic voltammetry measurements on the receptor in the presence of a series of organic guest species demonstrated the successful electrochemical sensing of dopamine through a distinct change in the ferrocene-centred redox-couple upon complex formation.     

Liquid membrane transportation of fluoride ions with alizarin based azacrown ether Zr-complex

A new alizarin based azacrown ether N-(alizarin-4-methylene)-4-azadibenzo-18-crown-6 (AMADCE) was synthesized, for the transportation of fluoride ions, by reacting 4-aza dibenzo 18-crown-6 with alizarin in the presence of formaldehyde. The compound forms a stable purple-red coloured complex with Zr(IV) in 0.5-1.0 M hydrochloric acid and gets quantitatively extracted into diphenyl ether. This diphenyl ether extract of the Zr(IV) complex instantaneously transfers fluoride ions from the aqueous phase, which was utilised for the sensitive determination and transportation of fluoride ions through the liquid membrane. The conditions like concentration of membrane phase, acidity of the source phase and the receiving phase, and the transportation time were optimized. The continuous transportation of fluoride ions was achieved by adding receptor ions like La³⁺ and Ca²⁺ in the receiving phase. The rate constant K and t_1/2 for the transportation were determined. The studies were extended for the removal of fluoride ions through the liquid membrane from the ground water samples and industrial effluent.     

Separation and Removal of Metal Ionic Species by Polymer Inclusion Membranes

Competitive alkali metal cation transport across polymer inclusion membranes (PIMs) containing sym-(alkyl)dibenzo-16-crown-5-oxyacetic acid carriers provides excellent selectivity for Na⁺ transport with the total fluxes being strongly influenced by the length of the alkyl chain that is attached geminal to the functional side arm in the lariat ether. Removal of chromium(VI) anions by PIMs from acidic aqueous phases was also investigated. Using tri-n-octylamine (TOA) as the ion carrier, Cr(VI) was removed by a PIM to decrease the source phase metal concentration from 1.0 to 0.010 ppm after 30 hours of transport. Competitive transport of Cr(VI) and Cr(III) ions from acidic source phases through PIMs and supported liquid membranes (SLMs) containing TOA and tri-n-octylphosphine oxide (TOPO) as carriers was evaluated and a very high Cr(VI)/Cr(III) separation ratio of 4800 was achieved with a PIM containing TOA. Competitive transport of Zn(II), Cd(II), and Cr(VI) from acidic aqueous solutions through PIMs containing TOA was investigated. The selectivity order for metal ion transport was: HCrO₄ ^–>CdCl₄ ^2–+CdCl₃ ^–>ZnCl₄ ^2–+ ZnCl₃ ^–. Non-contact atomic force microscopy was used to obtain images of the pores in cellulose triacetate membranes containing a plasticizer.     

A Spectrophotometric Study of Fe(III) Chelates of Some Hydroxy Coumarin Derivatives

Chelates formation of Fe(III) with 7–hydroxy–4–methyl coumarin–6–carboxylic acid (HMCCH)₂ and 8–amino–7–hydroxy–4–methyl coumarin (AHMCH) have been studied. It has been observed that Fe(III) forms 1:2 (metal:ligand) chelates with HMCCH₂ and AHMCH. The stability constants of these chelates at different ionic strengths and the effect of temperature on the stability constants of these chelates have been studied. The thermodynamic parameters such as entropy change (ΔS), free energy of formation (ΔG) and enthalpy change (ΔH) have also been calculated. The effect of dielectric constant oh the stability constants of these chelates have been studied. Estimation of nanogram quantities of Fe(III) with these ligands and the effect of diverse ions have also been studied and the results have been compared with other methods used for estimation of Fe(III).     

Study of complex formation between La+3, Ce+3 and Y3+ cations with some 18-membered crown ethers in methanol–water and methanol–acetonitrile binary mixtures

The complexation reactions between some rare earth metal cations (Ln; Y³⁺, La³⁺ and Ce³⁺) with 18-crown-6 (18C6), dicyclohexyl-18-crown-6 (DC18C6), benzo-18-crown-6 (B18C6) and decyl-18-crown-6 (Dec18C6), have been studied in methanol–acetonitrile (MeOH–AN) and methanol–water (MeOH–H₂O) binary mixtures using a competitive spectrophotometric method. 2-(2-thiazolylazo)-4-methyl phenol (TAC or L) was used as colorimetric complexant. It was found that the selectivity order of TAC for Ln cations is highly changed with changing the composition of the mixed solvents. Moreover, as the concentration of acetonitrile increases in MeOH–AN binary mixture, the stability of Ln–TAC complexes increases and passes through a maximum at a certain mole fraction of acetonitrile. In addition, the stability of Ln–crown ether complexes increases with increasing the concentration of methanol in MeOH–H₂O and acetonitrile in MeOH–AN binary solutions. A non linear behaviour was observed for variation of stability constants of all complexes versus the composition of the mixed solvents. The results show that 18C6 generally forms more stable complexes with La³⁺ and Ce³⁺ cations than DC18C6 in methanol and MeOH–H₂O binary mixtures, while this sequence is reversed in the methanol-acetonitrile binary mixtures which are rich with respect to acetonitrile.     

Ion-pair extraction of tetravalent plutonium from hydrochloric acid medium using crown ethers

Ion-pair extraction behaviour of plutonium (IV) from varying concentrations of HCl solution was studied employing crown ethers (benzo-l5-crown-5 (B15C5), 18-crown-6, (18C6), dibenzo-18-crown-6 (DB18C6), dicyclohexano-18-crown-6, (DC18C6), dibenzo-24-crown-8 (DB24C8) and dicyclohexano-24-crown-8 (DCH24C8)) in nitrobenzene as the extractant. Ammonium metavanidate was used as the holding oxidant in the aqueous phase and the conditions necessary for the quantitative extraction of the tetravalent ion were found. The co-extraction of species of the type [HL⁺].[HPu(Cl) ₆ ^– ] and [HL⁺]2·[Pu(Cl) ₆ ^2– ] as ion-pairs (where L represents the crown ether) is suggested.     

Application of countercurrent chromatography to the purification of chemical reagents

Countercurrent chromatography has been employed for the purification of solid chemical reagents, such as (NH₄)₂SO₄, NH₄HSO₄, NH₄F and NH₄Cl from a number of most common metal impurities (Fe, Al, Zn, Cu, Co, Cd, Ni, Cr, Ca, Mg, K) in order to gain high-purity reagents. After evaporation these can be used for fusion decomposition purposes in trace analysis of various refractory materials (e.g. high tech ceramics). N,N-hexamethylenedithiocarbamic acid, 8-hydroxyquinoline, dibenzo-18-crown-6 and dicyclohexano-18-crown-6 were used as extracting reagents.     

Decorating Channel Walls in Metal–Organic Frameworks with Crown Ethers for Efficient and Selective Separation of Radioactive Strontium(II)

Nuclear accidents and the improper disposal of nuclear wastes have led to serious environmental radioactive pollutions. The rational design of adsorbents for the highly efficient separation of strontium(II) is essential in treating nuclear waste and recovering radioactive strontium resources. Metal–organic frameworks (MOFs) are potential materials for the separation of aqueous metal ions owing to their designable structure and tunable functionality. Herein, a novel 3D MOF material MOF-18Cr6, in which 1D channels are formed using 18-crown-6-ether-containing ligands as channel walls, is fabricated for strontium(II) separation. In contrast to traditional MOFs designed by grafting functional groups in the framework pores, MOF-18Cr6 possesses regular 18-crown-6-ether cavities on the channel walls, which not only can transport and intake strontium(II) via the channels, but also prevent blockage of the channels after the binding of strontium(II). Consequently, the functional sites are fully utilized to achieve a high strontium(II) removal rate of 99.73 % in simulated nuclear wastewater. This study fabricates a highly promising adsorbent for the separation of aqueous radioactive strontium(II), and more importantly, can provide a new strategy for the rational design of high-performance MOF adsorbents for separating target substances from complex aqueous environments.     

Synthesis,characterization, and photochemistry of the supramolecules formed from chromium(III) thiocyanato anion associated with crown ethers

A series of anionic chromium(III) thiocyanato complexes with metal crown ether cations have been prepared and characterized. These complexes have the form [Crown-M]₂⁺[Cr(NCS)₅(H₂O)]²⁻ and [Crown-M]₃⁺[Cr(NCS)₆]³⁻, where M=Na⁺, K⁺, or NH₄⁺ and crown represents the crown ether. The crown ethers are 15-crown-5, B-15-crown-5, 18-crown-6, DB-18-crown-6, and DB-24-crown-8, where B- and DB- stand for benzo- and dibenzo-, respectively. The complexes are stable for at least 20 h in the dark in dimethylformamide(DMF) or in acetonitrile, and they release thiocyanate slowly, k=(0.71–2.67)×10⁻⁹ mol/(L s) in acetonitrile in the dark. Photoanation of thiocyanate was observed for the complexes in DMF and in acetonitrile. The quantum yields of thiocyanate release in DMF and in acetonitrile are reported. The quantum yields were in the range 0.05 to 0.52 mol einstein⁻¹ and were solvent and wavelength dependent. In general, larger quantum yields were observed in DMF than in acetonitrile. The photoreaction mechanism is discussed.     

Design and synthesis of iridium(III) azacrown complex: application as a highly sensitive metal cation phosphorescence sensor

A new metal cation probe bearing a central Ir(III) element and 1-aza-15-crown-5-ether substituted pyridyl pyrazolate as the chelate was synthesized. The octahedral molecular structure of was confirmed using single crystal X-ray diffraction analyses. Subsequent photophysical study showed yellow-green emission at approximately 560 nm in both fluid solution and solid state at room temperature. Remarkable differentiation in spectral properties upon metal cation (e.g. Ca2+) complexation makes complex a highly sensitive phosphorescence probe.     

冠醚配合物的热力学性质的研究 III. 碱金属离子与18C6甲基衍生物配位反应的电导研究

The coordination reaction of Na+, K+, Rb+ and Cs+ with benzo- 15-crown-5, 18-crown-6 and the newly synthesized cyclic polyethers 2, 3-benzo-8, 15-dimethyl-18-crown-6, 2, 3-benzo-8, 11, 15-trimethyl-18-crown-6 in methanol at 25`C has been studied by conductometric titration. The stability constants for the 1:1 coordination compounds were calculated. The marked selectivity of 18-crown-6 toward alkali metal ions was not found in its methyl derivatives. The induction effect of the benzene ring and methyl group on polyether ring reduced the stability of the coordination compounds. In methanol, the stability sequence of te compounds of alkali metal ions with 18-crown-6 was K+>Rb+>Cs+>Na+, that of its dimethyl derivative was K+>Rb+>Na+>Cs+ and that of its trimethyl derivative was K+>Na+>Rb+>Cs+, that is, the methyl substituent had a weaker influence on the stability of Na+ compound than on that of Rb+ or Cs+ compound. In the range of concentration studied, decrease in equivalent conductance is in agreement with the prediction on the basis of the structure of the complexes. The above results may give a clue for modifying the structure of a crown ether for specified selectivity.     

Crown moieties as cation host units in model polyamide compounds: Application in liquid-liquid cation extraction and in membrane cation transport

A new model polyamide compound that has a benzo-18-crown-6 moiety in the pendant structure is described. This model interacts with metal cations in the alkaline, earth alkaline, transition metal and heavy metal series. The interaction has been analyzed in terms of competitive cation extraction from aqueous solution by liquid model/dichloromethane phase. In each cation series, K(I), Ba(II), Cr(III), and Hg(II) have been selectively extracted by liquid model polyamide phases.The interaction of a dense composite model polyamide-cellulose acetate membrane with lead(II) has been studied through its adsorption isotherm, infrared spectra and scanning electron microscopy study of the membranes before and after Pb(II) adsorption. The transport of lead nitrate through the membrane together with that of sodium chloride (for comparison), have been evaluated.     

Dibenzo-18-crown-6-tricarbonylchromium compounds. Synthesis and substituent derived reversal of ion extraction selectivity

Mono- and bis-(tricarbonylchromium) compounds of dibenzo-18-crown-6 have been synthesized. The compounds exhibit a decreased ability to extract alkali metal salts into organic solvents, indicating an overall electron withdrawal from the oxygen crown by the Cr(CO)₃ substituents. For the disubstituted compound, the normal selectivity for K⁺ over Na⁺ is reversed.