Reactive surfactants in heterophase polymerization: Colloidal properties,film‐water absorption,and surfactant exudation

In this article the results obtained with latexes prepared by emulsion polymerization with a conventional surfactant and a polymerizable surfactant (surfmer) are presented. For this study, well‐defined styrene‐butylacrylate latexes with a conventional nonreactive surfactant (sodium dodecyl sulfate) and a maleate diester surfmer, of which films can be easily cast, were used. The latex with the surfmer was prepared following a surfmer addition strategy to maximize the amount of surfmer bound to the particle surface, and not buried in the particle interior. The latex properties in terms of mechanical stability, film‐water absorption, and film‐surfactant exudation were assessed and compared. The mechanical stability and water‐absorption properties of the latex prepared with surfmer were better than those of the latex with sodium dodecyl sulfate. Additionally, by using a surfmer the surfactant migration to the film‐substrate and film‐air interfaces can be inhibited. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2994–3000, 2002     

Preparation of Silica/Poly(tert‐butylmethacrylate) Core/Shell Nanocomposite Latex Particles

Nanocomposite latex particles, with a silica nanoparticle as core and crosslinked poly(tert‐butylmethacrylate) as shell, were prepared in this work. Silica nanoparticles were first synthesized by a sol‐gel process, and then modified by 3‐(trimethoxysilyl)propyl methacrylate (MPS) to graft C?C groups on their surfaces. The MPS‐modified silica nanoparticles were characterized by elemental analysis, FTIR, and ²⁹Si NMR and ¹³C‐NMR spectroscopy; the results showed that the C?C groups were successfully grafted on the surface of the silica nanoparticles and the grafted substance was mostly the oligomer formed by the hydrolysis and condensation reaction of MPS. Silica/poly(tert‐butylmethacrylate) core/shell nanocomposite latex particles were prepared via seed emulsion polymerization using the MPS‐modified silica nanoparticle as seed, tert‐butylmethacrylate as monomer and ethyleneglycol dimethacrylate as crosslinker. Their core/shell nanocomposite structure and chemical composition were characterized by means of TEM and FTIR, respectively, and the results indicated that silica/poly(tert‐butylmethacrylate) core/shell nanocomposite latex particles were obtained.     

Preparation of polystyrene latex particles by γ-rays-induced emulsifier-free emulsion polymerization

Monodisperse polystyrene latex particles were prepared by ⁶⁰Co-γ-ray radiation-induced emulsifier-free emulsion polymerization with the use of surfactant monomer at room temperature. The surfactant monomer 10(9)-hydroxyl-9(10)-allyl ether octadecanoic acid (HAEOA) was synthesized and characterized by FT-IR and ¹H-NMR spectra. TEM was used to characterize the polystyrene latex particles. HAEOA acted as not only a comonomer but also a stabilizer to copolymerize with styrene and stabilize the polystyrene latex particles. Kinetics analysis shows that there is no constant rate stage which seems to indicate a droplet nucleation mechanism.     

An Investigation of the Applicability of Universal Particle-Size Calibration in the Size-Exclusion Chromatography of Polymer Latices Using Porous Glass Packings

Abstract

Two series of polymer latices, one of pure polystyrene, the other being coated with polymethylmethacrylate, were prepared using seeded emulsion polymerisation techniques. They were characterised by transmission electron microscopy and found to have narrow particle-size distributions with diameters, D_o in the range 57.7 to 207.1 nm. They were chromatographed on an SEC instrument equipped with columns packed with porous glasses. Aqueous chromatographic eluants included sodium dodecylsulphate or sodium dodecylbenzene sulphonate surfactants plus sodium nitrate added to vary the ionic strength between 4.44 and 150 mmol dm^?3. At ionic strengths below and including 62.5 mmol dm^?3 the data for the two latex types fell on common plots of log D_o against elution volume indicating the validity of universal calibration. Variation of the surfactant type in the eluant and a comparison of dialysed against undialysed latices showed no significant effect on latex retention volumes. Anomalous behaviour, which was attributed to adsorption effects, was, however, observed at higher ionic strengths.     

Advanced environmentally friendly anticorrosive materials prepared from water-based polyacrylate/Na-MMT clay nanocomposite latexes

A series of novel advanced environmentally friendly anticorrosive materials have been successfully prepared by effectively dispersing nanolayers of Na⁺-montmorillonite (Na⁺-MMT) clay into water-based polyacrylate latex (i.e., vinyl acrylic terpolymers). First of all, a polyacrylate latex was synthesized through co-polymerizing organic monomers of MMA, BMA and styrene (St) using conventional emulsion polymerization technique with SDS, 1-pentanol and KPS as surfactant, co-surfactant and initiator, respectively. Subsequently, the commercial purified hydrophilic Na⁺-MMT was effectively dispersing into the polyacrylate latex through the direct solution dispersion technique.The as-prepared neat polyacrylate and the series of water-based polyacrylate/Na⁺-MMT clay nanocomposite (Na⁺-PCN) materials were subsequently characterized by FTIR spectroscopy, XRD, TEM and GPC. The water-based Na⁺-PCN materials loaded with low content of Na⁺-MMT when in the form of coating on the cold rolled steel (CRS) coupons was found to be remarkably superior in anticorrosion efficiency over those of neat polyacrylate based on a series of electrochemical measurements of corrosion potential, polarization resistance, corrosion current, and impedance spectroscopy in saline. Effect of material composition on the molecular barrier, optical clarity and thermal stability were also studied by molecular permeability analysis, ultraviolet-visible transmission spectra, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), respectively. Organo-PCN materials were also prepared as a control experiment for comparative studies.     

Latex‐state NMR spectroscopy for quantitative analysis of epoxidized deproteinized natural rubber

Method of quantitative analysis through latex‐state ¹³C NMR spectroscopy was established for in situ determination of epoxy group content of epoxidized natural rubber in latex stage. The epoxidized natural rubber latex was prepared by epoxidation of deproteinized natural rubber with freshly prepared peracetic acid in latex stage. The resulting epoxidized deproteinized natural rubber (EDPNR) latex was characterized through latex‐state ¹³C NMR spectroscopy. Chemical shift values of signals of latex‐state ¹³C NMR spectrum for EDPNR were similar to those of solution‐state ¹³C NMR spectrum for EDPNR. Resolution of latex‐state ¹³C NMR spectrum was gradually improved as temperature for the nuclear magnetic resonance (NMR) measurement increased to 70°C. Signal‐to‐noise ratio of latex‐state ¹³C NMR measurement was similar to that of solution‐state ¹³C NMR measurement at temperature above 50°C. The epoxy group content determined through latex‐state NMR spectroscopy was proved to be the same as that determined through solution‐state NMR spectroscopy. Copyright © 2017 John Wiley & Sons, Ltd.     

Association,emulsifying, and solubilization properties of amphiphilic hyperbranched poly(acrylic acid) with short polystyrene stickers

Amphiphilic hyperbranched copolymer chains made of large hyperbranched poly(acrylic acid) cores grafted with short polystyrene stickers (HB‐PAA_n‐g‐PS_{n + 1}) with different n values (n = 1, 10, 47) were well prepared and confirmed by size exclusion chromatography, Fourier transform infrared spectroscopy and ¹H nuclear magnetic resonance. The study on the interchain association behavior of these amphiphilic chains indicates that larger HB‐(PAA)_n‐g‐(PS)_{n + 1} copolymer chains have a less tendency to undergo interchain association. Moreover, the simple vial‐inversion and rheological experiments show that the apparent critical gel concentration (C_g) decreases with n, but no sol–gel transition was observed for triblock PS‐PAA‐PS even when the concentration is up to 200 g L^?1. Further transmission electron microscopy study of the latex particles prepared with HB‐(PAA)_n‐g‐(PS)_{n + 1} as surfactant reveals that the latex particles are spherical and narrowly dispersed; while the measured latex particle number (N_p) indicates the surfactant efficiency of HB‐(PAA)₄₇‐g‐(PS)₄₈ is poorer than that of triblock PS‐PAA‐PS (n = 1). Finally, pyrene solubilization measurement shows the solubilization efficiency of HB‐(PAA)_n‐g‐(PS)_{n + 1} copolymers decreases with n, consistent with the previous observed interchain association result. The present study demonstrates that both the chain topology and the styrene weight fraction dominates the final solution properties of amphiphilic HB‐(PAA)_n‐g‐(PS)_{n + 1} chains in aqueous solution. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 128–138     

Electrochemical Behavior of Cationic‐Anionic Surfactant Solutions by Cyclic Voltammetry

The electrochemical behavior of cationic tetradecyltrimethylammonium bromide (TTABr), anionic sodium dodecylsulfate (SDS), cationic‐anionic (catanionic) mixed surfactant and self‐assembled solutions at Pt wire electrode has been studied by cyclic voltammetry (CV). On the basis of the cyclic voltammograms and determining the self‐assembled structures by using freeze‐fracture transmission electron microscopy (FF‐TEM), the mechanisms of the electrochemical reactions near the electrode for the two surfactant self‐assembled solutions, i.e., micelles and vesicles, are presented. When mixing TTABr and SDS, at the right mixing ratio of TTABr:SDS, vesicles are established spontaneously. The redox behavior of two vesicle‐phase solutions at a constant total concentration of 25 mmol·L^?1 with the ratios of TTABr:SDS 9.35:0.65 of positive charges of bilayer membranes and 1.25:8.75 of negative charges of bilayer membranes are investigated by cyclic voltammetry. These cyclic voltammograms of vesicles with different charges are compared with those of 100 mmol · L^?1 TTABr and 100 mmol · L^?1 SDS micelle solutions. This CV study on surfactant self‐assembled solutions should open up a new method of study in surfactant science.     

Mechanism of emulsion polymerization of styrene in soap-free systems

The formation and growth of monodisperse polystyrene latex particles in the absence of added surfactant has been studied by sampling polymerization reactions at different times and determining the surface and bulk properties of the latex. A large number of nuclei in excess of 5 × 10¹²/ml were generated during the first minute of reaction, but this fell due to coagulation until a constant number (10¹¹?10¹²/ml) was reached. The rate of polymerization per particle was then found to be proportional to the particle radius. Gel-permeation chromatography has shown that the initial particles consist mainly of material of MW 1000 with a small amount of polymer up to MW 10⁶, and the presence of this low molecular weight polymer, which in many cases can still be detected after 100% conversion, is taken as being indicative of particle formation via a micellization-type mechanism involving short-chain (MW 500) free-radical oligomers. M?_n values determined for the latex particles throughout the course of reactions show that the molecular weight increases to a maximum of about 10⁵ as the particles grow. The presence of anomalous regions within the particles has been confirmed by transmission electron microscopy, scanning electron microscopy, and gas adsorption studies. It has also been found possible to re-expose these regions within apparently homogeneous particles by stirring with styrene monomer; this is indicative of a molecular weight heterogeneity within the latex particles. The presence of sulfate, carboxyl, and hydroxyl groups upon the latex particle surfaces has been determined by conductometric titration.     

Diene‐based polymer nanoparticles: Preparation and direct catalytic latex hydrogenation

The diene‐based polymer nanoparticles represented by poly(butadiene‐co‐acrylonitrile) were prepared in the semibatch emulsion polymerization system using Gemini surfactant (GS) trimethylene‐1,3‐bis(dodecyldimethylammonium bromide) as the emulsifier. The nanoparticles within the range of 17–54 nm were achieved with narrow molecular weight and particle size distributions. A spherical morphology was observed for the produced nanoparticles. The effects of GS concentration on the particle size, molecular weight, polymerization conversion and solid content, and composition of copolymer were investigated. The semibatch process using monomeric and conventional surfactant sodium dodecyl sulfate (SDS) was compared. At the second stage of this study, the prepared unsaturated nanoparticles were employed as the substrates for the latex hydrogenation in the presence of Wilkinson's catalyst, that is, RhCl(P(C₆H₅)₃)₃. The effects of the particle size and catalyst concentration on the latex hydrogenation rate were investigated. The particle size is found to have a significant effect on the reaction rate. When the 17‐nm nanoparticles were used as the substrates, a high conversion of 95 mol % was obtained within 18 h using only 0.1 wt % RhCl(P(C₆H₅)₃)₃. The latex hydrogenation process was completely free of organic solvents. The present synthesis and following “green” hydrogenation process can be extended to latices made from semibatch emulsion containing other diene‐based polymers. This study shows great promise for decreasing the demanded quantity of expensive catalyst and eliminating the organic solvent in the hydrogenation process. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Mechanism of emulsion polymerization of styrene using a reactive surfactant

The emulsion polymerization of styrene using the reactive surfactant sodium dodecyl allyl sulfosuccinate (TREM LF‐40) was studied. The polymerization kinetics were found to be unusual in that R_p was not directly proportional to N_p (R_p ∝ N_p^0.67). Several reasons are stated to explain the unusual kinetics, including chain transfer to TREM LF‐40, copolymerization of styrene with TREM LF‐40, and the influence of the homopolymer of TREM LF‐40 [poly(TREM)] and/or the copolymer [poly(TREM‐co‐styrene)] on the entry and exit rates of free radicals. The possibility of both chain transfer and copolymerization exists primarily at the oil/water interface, whereas both can also occur in the aqueous and monomer phases. Bulk polymerizations of styrene in the presence of TREM LF‐40 and poly(TREM) were conducted, and the results show that the reaction rate decreased for the styrene/TREM LF‐40 system. Latex characterization by serum replacement and titration measurements provided evidence for the chemical bonding of TREM LF‐40 to the polymer particles. The fraction of chemically bound reactive surfactant decreased with increasing surfactant concentration and increased with increasing initiator concentration. Relatively high contact angles of water on films cast from the latexes showed that TREM LF‐40 did not migrate significantly to the surface of the film, which was consistent with the latex‐surface characterization results. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3093–3105, 2001     

Self‐Assembled Gels Formed in Deep Eutectic Solvents: Supramolecular Eutectogels with High Ionic Conductivity

1,3:2,4‐Dibenzylidene‐d ‐sorbitol (DBS), a simple, commercially relevant compound, was found to self‐assemble as a result of intermolecular noncovalent interactions into supramolecular gels in deep eutectic solvents (DESs) based on choline chloride combined with alcohols/ureas. DBS formed gels at a loading of 5 % w/v. Rheology confirmed the gel‐like nature of the materials, electron microscopy and X‐ray diffraction indicated underpinning nanofibrillar DBS networks, and differential scanning calorimetry showed the DES nature of the liquid‐like phase was retained. The ionic conductivities of the gels were similar to those of the unmodified DESs, thus proving the deep eutectic nature of the ionic liquid‐like phase. Gelation was tolerant of ionic additives Li⁺, Mg²⁺, and Ca²⁺; the resulting gels had similar conductivities to electrolyte dissolved in the native DES. The low‐molecular‐weight gelator DBS is thus a low‐cost additive that forms gels in DESs from readily available constituents, with conductivity levels suitable for practical applications.     

Photoreactive particle prepared from natural rubber and 1,9‐nonandioldimethacrylate

Photoreactive particle was prepared by graft copolymerization of 1,9‐nonandioldimethacrylate (NDMA) onto deproteinized natural rubber (DPNR) particles in latex stage. First, NDMA was mixed with α‐cyclodextrin (α‐CD) as a coupling agent to form an inclusion complex to stabilize a carbon–carbon double bond of NDMA as a bifunctional monomer. Second, the inclusion complex was graft‐copolymerized onto natural rubber (NR) in latex stage with potassium persulfate (KPS) as an initiator, after deproteinization with urea in the presence of surfactant. A terminal vinyl group of NDMA was used for the graft copolymerization, while the other remained in the resulting polymer, due to the coupling effect of the α‐CD. The products, after washing α‐CD out, were characterized by FTIR, X‐ray diffraction (XRD), ¹H NMR and solid‐state ¹³C NMR measurements. The amount of residual carbon–carbon double bond after graft copolymerization was investigated in relation to the amount of rubber and reaction temperature. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4111–4118, 2009     

Film formation from nano‐sized polystyrene latex particles

This work reports on the steady state fluorescence (SSF) technique for studying film formation from surfactant‐free, nano‐sized polystyrene (PS) latex particles prepared via emulsion polymerization. The latex films were prepared from pyrene (P)‐labeled PS particles at room temperature and annealed at elevated temperatures in 5, 10, 15, 20 and 30 min time intervals above the glass transition temperature (T_g) of PS. During the annealing processes, the transparency of the film was improved considerably. Monomer and excimer fluorescence intensities, I_P and I_E respectively, from P were measured after each annealing step to monitor the stages of film formation. Evolution of transparency of the latex films was monitored by using photon transmission intensity, I_tr. Void closure and interdiffusion stages were modeled and related activation energies were determined and found to be 10.3 and 50.3 kJ mol⁻¹. Void closure temperatures, T_v, were determined from the minima of I_tr value. Copyright © 2005 John Wiley & Sons, Ltd.     

Hemiesters and hemiamides of maleic and succinic acid: synthesis and application of surfactants in emulsion polymerization with styrene and butyl acrylate

Hemiesters and hemiamides of maleic acid with different chain lengths of the hydrophobic alkyl group (R = C₈H₁₇, C₁₀H₂₁, C₁₂H₂₅, C₁₆H₃₃) have been synthesized and used as surfactants in the emulsion polymerization of styrene and butyl acrylate. The same polymerization experiments were also carried out using nonreactive surfactants with an analogous succinic structure. The chemical structure of the surfactants was confirmed by 1H nuclear magnetic resonance. The melting point and critical micelle concentration of the reactive surfactants described herein were measured. All of the surfactants studied provided good stability of styrene/butyl acrylate latexes, when compared with a reference latex of a styrene/butyl acrylate copolymer prepared with a surfactant sodium dodecyl sulfate. The amount of surfactant grafted onto the particles of the final latex was estimated by conductimetric titration. Between 33 and 68% of surfactant used in emulsion polymerization was found on the surface of latex particles. Electrolyte addition at high concentration and freeze/thaw cycle cause flocculation of latexes. Copyright © 1999 John Wiley & Sons, Ltd.     

Organic solvent‐free catalytic hydrogenation of diene‐based polymer nanoparticles in latex form: Part I. Preparation of nano‐substrate

Poly(butadiene‐co‐acrylonitrile) (NBR) nanoparticles were synthesized in a semibatch emulsion polymerization system using Gemini surfactant trimethylene‐1,3‐bis (dodecyldimethylammonium bromide), referred to as Gemini‐type surfactant (GS) 12‐3‐12, as the emulsifier. In this polymerization system, an enhanced decomposition rate of initiator ammonium persulfate was achieved even under the low temperature of 50 °C which is attributed to the acidic initiation environment provided using GS 12‐3‐12. The microstructure and copolymer composition of the polymer nanoparticles were characterized by Fourier‐transformed infrared and ¹H nuclear magnetic resonance spectroscopy. The effects of the surfactant concentration on the particle size, zeta potential, polymerization conversion, copolymer composition, molecular weight, and glass transition temperature (T_g) were investigated. It was found that the particle diameter can be controlled by the surfactant concentration and monomer/water ratio and particle sizes below 20 nm can be reached. The obtained latex particles exhibit a spherical morphology. A kinetic study of the copolymerization reaction was carried out, which indicated that an azeotropic composition was produced. The synthesized fine NBR nanoparticles can be employed as the nano substrate for a subsequent hydrogenation process so as to overcome the challenge involved in the field of latex hydrogenation of polymers, which can be found in a related report: Organic Solvent‐Free Catalytic Hydrogenation of Diene‐based Polymer Nanoparticles in Latex Form: Part II. Kinetic Analysis and Mechanistic Study. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

表面活性剂对染料敏化太阳能电池光电性能的提高

在硝酸/醋酸(HNO₃/HAc)的水溶液中分别加入十二烷基苯磺酸钠(DBS)、十六烷基三甲基溴化铵(CTAB)、吐温20等不同类型的表面活性剂来水解钛酸四正丁酯制得前驱体溶液,通过水热法制备纳晶TiO₂,并组装成染料敏化太阳能电池(DSSC)。通过XRD、SEM和UV-Vis对纳晶TiO₂薄膜进行表征,并对DSSC进行光电流-光电压(I-V)曲线的测试,研究了不同类型的表面活性剂和不同浓度的CTAB对DSSC光电性能的影响。结果表明：加入阳离子表面活性剂CTAB时提高了DSSC的光电性能,而加入阴离子表面活性剂DBS和非离子表面活性剂吐温20时,DSSC的光电性能反而降低。随着CTAB浓度的增加,电池的光电性能先提高后下降,当c_CTAB=0.08 mol·L^-1时,DSSC的光电转化效率最高为5.76%,比不添加表面活性剂制备的纳晶TiO₂所组装的DSSC的光电转化效率提高了约18%。     

Synthesis of ZnS Nanospheres in Microemulsion Containing Cationic Gemini Surfactant

The reverse microemulsion containing cationic gemini surfactant trimethylene‐1,3‐bis(dodecyldimethyl ammonium bromide) (12‐3‐12, 2Br^?) is applied to synthesize ZnS nanospheres. Narrow size distributed ZnS nanospheres with controllable size and uniform morphology are successfully fabricated by direct reaction of ZnCl₂ and Na₂S in the reverse microemulsion systems. Except for the appearance of large aggregates owing to quantum size effects when the incubation time is 2 h, with increasing the incubation time from 12 to 48 h, the diameter of the ZnS nanosphere can be controlled as 20–25 nm and 140 nm, respectively. X‐ray diffraction (XRD), transmission electron microscopy (TEM), and UV‐visible absorption spectroscopy are applied to characterize the resulting ZnS nanoparticles. In the system used in the present study uniform nanosphere morphology can be synthesized, with the incubation time as an important factor in controlling the size of as‐prepared products.     

Structural characterization of vulcanized natural rubber by latex state 13C NMR spectroscopy

Structural characterization of vulcanized natural rubber was performed by high‐resolution latex‐state ¹³C NMR spectroscopy. The vulcanized natural rubber latex was prepared by vulcanization of high ammonia natural rubber latex with sulfur and sodium di‐n‐butyldithiocarbamate as vulcanizing agents. High resolution was attained for latex‐state ¹³C NMR spectroscopy even after vulcanization of the rubber latex, as is evident from no background in spectrum and narrow half width of signals, which were independent of vulcanization time. Small signals at 44 and 58 ppm in the carbon region were assigned by measurements of both distortionless enhancement by polarization transfer (DEPT) and attached proton test (APT) to secondary, tertiary, and quaternary carbons of crosslinking points. The assignment was proved by high‐resolution solution‐state NMR spectroscopy of vulcanized liquid cis‐1,4‐polyisoprene as a model, in which DEPT, APT, 2‐dimensional ¹H‐¹³C correlation (HETCOR), and 2‐dimensional heteronuclear multiple bond correlation (HMBC) measurements were applied. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1003–1009, 2007     

Ultrasonically induced microemulsion polymerization of styrene

In this paper, ultrasonically induced microemulsion polymerization of styrene was successfully performed, possessing many merits such as high polymerization rate, the formation of small latex particles with a narrow size distribution, the absence of initiator and relatively low surfactant concentration. The monomer conversion reached 70% in 1 h, and the average diameter of polystyrene (PS) latex was about 30 nm which could be prepared with 3% surfactant (sodium dodecyl sulfate, SDS) concentration. The molecular weight of PS was around 10⁶ and the poly-distribution index was 1.06, indicating a very narrow distribution. Several influencing factors were investigated in detail, showing that ultrasonically induced microemulsion polymerization is a new route to prepare PS nanoparticles.