Preparation and Characterization of Trans‐Resveratrol Imprinted Polymers

Abstract

In order to selectively extract trans‐resveratrol from Chinese herbs, molecularly imprinted polymers (MIPs) were prepared with trans‐resveratrol as the template molecule. The influences of porogenic solvents and functional monomers on the recognition properties of the polymer were studied. The MIP, which was prepared in acetone using 4‐vinylpyridine as functional monomer, displayed good affinity and recognition property for the template molecule. This indicates that the 4‐vinylpyridine can form hydrogen‐bonding or ionic interaction with trans‐resveratrol. Experimental result also indicated that the MIP column can separate trans‐resveratrol from matrix components in the Polygonum cuspidatum extract.     

Three‐Arm Star Homo‐ and Block Co‐Polymers Via Atom Transfer Radical Polymerization

Star homopolymers of some vinyl monomers such as methyl methacrylate, n‐butyl methacrylate and styrene (MMA, nBMA, St.) were prepared by using a N,N,N′N′‐tetramethylethylenediamine ligand/CuBr catalytic system via atom transfer radical polymerization (ATRP). A three armed benzene based core was successfully used as initiator. Low polydispersities and regular molecular weight values were obtained in most cases, especially at low conversions. MMA and BMA showed comparable behavior where controlled and true ATRP was observed even at high conversions. However, styrene monomer recorded irregular high polydispersities at high conversions in spite of the relatively low molecular weight values. Some block copolymers were obtained using MMA homopolymer as macroinitiator with the same strategy of ATRP. ¹H‐NMR confirmed the structures of the resulting polymers. Transmission electron microscopy (TEM) proved the nano‐structure of the star polymers. The thermal behavior of the MMA star homo and copolymers was studied. The effect of the star shape on thermal behavior was very clear with respect to the linear ones.     

Preparation of Poly(ethylene terephthalate)‐g‐Methacrylamide Copolymers Initiated by Azobisizobutyronitrile: Characterization and Investigation of Some Properties

Poly(ethylene terephthalate)‐g‐methacrylamide (PET‐g‐MAAm) copolymer was prepared by graft copolymerization in organic solvent/water mixtures by using azobisizobutyronitrile (AIBN) as an initiator. The highest graft yield was obtained in 20/80 (v/v) acetonitrile/water mixture as 30.0%. The effect of polymerization parameters such as the ratio of solvent/water mixture, concentrations of initiator and monomer, temperature and time on the graft yield was studied. The moisture regain of the PET fiber increased with grafting from 0.42% to 3.01%. Thermogravimetric data showed that the thermal stability of PET fibers decreased with grafting and 85% of total weight of 29.7% grafted fiber was lost at 500°C. On the other hand, fiber density decreased with increasing graft yield. At SEM micrographs, the layers oriented in the direction of fiber length were observed on the surface of PET fiber as a result of grafting.     

Photodegradation of Ethylene/Propylene/Polar Monomers Co‐ and Terpolymers. I—Prepared by Group 4 Catalyst Systems

The photooxidative degradation behavior of polyethylene, its copolymers (propylene/polar monomers) and terpolymers, synthesized by a group 4 catalyst system, has been studied by Fourier transform infrared spectroscopy and confirmed with scanning elecrton microscopy for morphological changes. The kinetics of photodegradation has also been studied. Surface damage caused by polychromatic (≥290 nm) at 55°C in air is presented in different micrographs. The rate of photodegradation is very fast in terpolymers containing polar monomers as compared with copolymers and polyethylene. Morphological study of these photodegraded samples showed a very good relation with photodegradation results.     

Functional Monomers and Polymers. 165. Dehydrochlorination of Head‐to‐Tail 1,4‐rans‐Poly‐(‐1‐Chlorobutadiene) Prepared by Inclusion Polymerization in Deoxycholic Acid Canals

Thermal and chemical dehydrochlorination of head‐to‐tail 1,4‐trans‐poly(‐1‐chlorobutadiene) prepared by inclusion polymerization in deoxycholic acid canals resulted in formation of a trans‐polyacetylene‐type polymer. The dehydrochiorinated polymer was characterized by UV/VIS, IR, Raman, and ESR spectroscopy. The number of conjugated double bonds in the polymer was about 10–20. Doping with iodine was also studied.     

Preparation of a PEG‐Supported Ligand as Highly Stable Palladium Catalyst and Its Efficient Recyclability in the Heck Reaction

A reagent of NNN ligands immobilized on PEG has been prepared and coordinated to Pd(OAc)₂ to provide a highly efficient and recyclable catalysis system for the Heck reaction. The reaction works very well with this catalysis system, and no palladium black is observed during the reaction. The reagent and palladium can be recycled easily and do not show significant activity decay after being reused 10 times.     

Preparation of Room‐Temperature Ionic Liquids by Neutralization of 1,1,3,3‐Tetramethylguanidine with Acids and their Use as Media for Mannich Reaction

Abstract

New room‐temperature ionic liquids (ILs) were prepared by neutralization of 1,1,3,3‐tetramethylguanidine with different acids under ambient condition. The density, viscosity, decomposition temperature, electronic conductivity, and miscibility with some commonly used solvents were determined. As an example of the applications of the new ILs, the reaction of benzaldehyde, aniline, and acetophenone was carried out in the ILs. The ILs are easily prepared in large scale.     

Brush Type Copolymers of Poly(3-hydroxybutyrate) and Poly(3-hydroxyoctanoate) with Same Vinyl Monomers via “Grafting From” Technique by Using Atom Transfer Radical Polymerization Method

Brush type graft copolymers of poly(3-hydroxybutyrate) (PHB) and poly(3-hydroxyoctanoate) (PHO) with methylmethacrylate, (MMA), styrene, (S), and n-butylmethacrylate, (n-BuMA) were obtained by using Atom Transfer Radical Polymerization Method, (ATRP), via “grafting from” technique. Firstly PHB and PHO were chlorinated by passing chlorine gas through their solution in CHCl₃/CCl₄ (75/25 v/v) mixture and CCl₄, respectively, in order to prepare chlorinated PHB, PHB-Cl, and chlorinated PHO, PHO-Cl, with different chlorine contents. The determination of the chlorine content in chlorinated poly(3-hydroxyalkanoate) (PHA-Cl) was performed by the Volhard Method. Then ATRP of vinyl monomers was initiated by using PHA-Cl as macroinitiators in the presence of cuprous chloride (CuCl)/2,2′-bipyridine complex as catalyst, at 90 °C in order to obtain brushes containing PHAs. The polymer brushes were fractionated by fractional precipitation methods and the γ values calculated from the ratio of the volume of nonsolvent (methanol) and the volume of solvent (chloroform) of brushes varied between 0.82 and 6.50 depending on the composition of brushes. The polymer products were characterized by gel permeation chromatography (GPC), ¹H NMR, FTIR, thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) techniques.     

Post‐chemiluminescence Method of the Determination of Loperamide Hydrochloride in Human Plasma and Pharmaceutical by Using Dichlorofluorescein as Chemiluminescence Reagent

Abstract

A post‐chemiluminescence (PCL) was observed when loperamide hydrochloride solution was injected into the reaction mixture after the finish of CL reaction of alkaline N‐Chlorosuccinimide (NCS) and dichlorofluorescein. Based on this phenomenon, a simple, sensitive and fast flow injection PCL method was established for the determination of loperamide hydrochloride. The possible mechanism for the PCL reaction was discussed via the investigation of the CL kinetic characteristics, the CL spectra, the fluorescence spectra. The PCL intensity responded linearly to the concentration of loperamide hydrochloride in the range 8.0×10^?10 to 6.0×10^?7 g · ml^?1 with a linear correlation of 0.9995. The detection limit was 4×10^?10 g · ml^?1. The relative standard deviation was 2.4% for 4.0×10^?8 g · ml^?1 loperamide hydrochloride (n=11). This method has been applied to the determination of loperamide hydrochloride in human plasma and pharmaceutical samples with satisfactory results.     

Synthesis of α,ω‐Diazidoalditol Derivatives via Both bis‐ or tris‐Cyclic Sulfites and Peracetylated α,ω‐Dibromoalditols as Bielectrophilic Intermediates

Abstract

The α,ω‐diazidoalditol derivatives with erythro, threo, xylo, ribo, D‐arabino, D‐manno, and D‐gluco configuration were efficiently synthesized, respectively, from bis‐ or tris‐cyclic sulfite or peracetylated α,ω‐dibromoalditol intermediates. The cyclic sulfite intermediates has the advantage to lead directly to the free α,ω‐diazido‐α,ω‐dideoxyalditols.     

l-Amino Acids as Chiral Selectors for the Enantioseparation of (±)-Bupropion by Ligand Exchange Thin-Layer Chromatography Using Cu(II) Complex via Four Different Approaches

JPC – Journal of Planar Chromatography – Modern TLC - The present paper deals with direct enantioresolution of (±)-bupropion using thin-layer chromatography and different...     

Speciation Analysis of Osmium(VIII) and Osmium(IV) by UV‐VIS Spectrophotometry Using Quercetin as the Reagent

Abstract

The UV‐VIS spectrophotometric methods for the determination of Os(VIII) (as OsO₄) and Os(IV) (as OsCl₆ ^2? complex) in their mixtures were developed. Quercetin (Q), a flavonoid compound, was used as a chromogenic reagent. Both direct and derivative spectrophotometry can be employed for the determination of Os(VIII). The calculation of the first‐derivative spectrum of the examined mixture and the use of the signal at 285.1 nm allows reaching a better detection limit (0.01 µg mL^?1 Os) as compared with direct spectrophotometry (0.1 µg mL^?1 Os). Relative standard deviations of the results are in the range of 0.87%–4.65% and 0.45%–1.15% for direct and derivative mode, respectively. Selective redox reaction of OsO₄ with Q under the conditions used (0.05 M HCl, 1×10^?4 M Q, 15 min heating at 70°C) makes the basis of its determination in mixtures with the OsCl₆ ^2? complex. Quercetin does not react with the OsCl₆ ^2? complex. The signals of the OsCl₆ ^2? complex can be isolated from the examined mixtures by the calculation of the third‐order derivative spectra and the use of the values at 340.0 nm. The effectiveness of the reduction of OsO₄ in chloride solutions has been studied by the developed method.     

Molecular Engineering of Liquid Crystal Polymers by Living Polymerization. XXIII. Synthesis and Characterization of AB Block Copolymers Based on ω-[(4-Cyano-4′ -Biphenyl)-oxy]alkyl Vinyl Ether, 1H, 1H, 2H, 2H-Perfluorodecyl Vinyl Ether,and 2-(4-Blphenyloxy)ethyl Vinyl Ether with 1H, 1H, 2H, 2H-Perfluorodecyl Vinyl Ether

Abstract

This paper describes the synthesis and characterization of AB block copolymers based on ω-[(4-cyano-4′-biphenyl)oxy]alkyl vinyl ether (6-n), with alkyl being ethyl (6-2), propyl (6-3), nonyl (6-9), and undecanyl (6-11), with 1H, 1H, 2H, 2H-perfluorodecyl vinyl ether (CF8), poly[(-6-n)-b-CF8]X/Y (where X/Y refers to the weight ratio of the two segments), and of 2-(4-biphenyloxy)ethyl vinyl ether (BEVE) with 1H,-1H, 2H, 2H-perfluorodecyl vinyl ether, poly[BEVE-b-CF8]X/Y. They were prepared by living cationic polymerization and exhibit a narrow molecular weight distribution. All block copolymers display a micro-phase-separated morphology when the A segment is in the liquid crystalline phase. Block copolymers based on 6-2, 6-3, and BEVE with CF8 also exhibit a microphase-separated morphology in the melt phase of A and B blocks.     

Hydrothermal in situ Ligand Synthesis from 1,10-Phenanthroline-5,6-dione and Characterization of 1D Coordination Polymers [Co（bpdc）（H2O）3] · H2O and [Cu（bpy）V2O6]

Hydrothermal treatment of MCl2(M=Co or Cu), NH4VO3, and 1,10-phenanthroline-5,6-dione(pdon) resulted in the formation of a duplex coordination polymer [Co(bpdc)(H2O)3]·H2O(bpdc=2,2′-bipyridine-3,3′-dicarboxylate) and a chain-like coordination polymer [Cu(bpy)V2O6](bpy=2,2′-bipyridine). X-ray single-crystal structural analysis shows that under hydrothermal conditions and in the presence of different transition metals, the organic reagent pdon was transformed in situ into bpdc and bpy, respectively. Mechanism of the in situ ligand synthesis reaction has been discussed.