通过RAFT法制备聚合物/膨润土杂化材料

通过可逆加成-断裂链转移(RAFT)自由基聚合方法合成了聚合物/膨润土(蒙脱石)杂化材料. 以乙基黄原酸基膨润土为链转移剂, AIBN为引发剂, 在环己酮溶液中, 通过甲基丙烯酸甲酯的RAFT自由基聚合, 得到了一系列的聚合物/膨润土杂化材料. 并用FT-IR, NMR, SPM, TG, GPC等分别对产物的微观结构、热性能、有机物含量以及分子量和分子量分布进行了表征和测试.     

RAFT Polymerization: Adding to the Picture

SUMMARY: Factors affecting the choice of RAFT agent [RSC(Z) = S] for a given polymerization are discussed. For polymerization of methyl methacrylate (MMA), tertiary cyanoalkyl trithiocarbonates provide very good control over molecular weight and distribution and polymerizations show little retardation. The secondary trithiocarbonate RAFT agents with R = CHPh(CN) also gives good control but an inhibition period attributed to slow reinitiation is manifest. Radical induced reduction with hypophosphite salts provides a clean and convenient process for removal of thiocarbonylthio end groups of RAFT-synthesized polymers. Two methods providing simultaneous control over stereochemistry and molecular weight distribution of chains formed by radical polymerization are reported. Polymerization of MMA in the presence of scandium triflate provides a more isotactic PMMA. A similar RAFT polymerization with trithiocarbonate RAFT agents also provides control and avoids issues of RAFT agent instability seen with dithiobenzoate RAFT agents in the presence of Lewis acids. RAFT polymerization of tetramethylammonium methacrylate at 45 °C provides a more syndiotactic PMMA of controlled molecular weight and distribution (after methylation; mm:mr:rr 2:21:77 compared to 3:35:62 when formed by bulk polymerization of MMA).     

Matrix‐grafted multiwalled carbon nanotubes/poly(methyl methacrylate) nanocomposites synthesized by in situ RAFT polymerization: A kinetic study

A new approach was developed to functionalize multiwalled carbon nanotubes (MWCNTs) with a polymerizable methyl methacrylate (MMA) groups, and the structure of functionalized MWCNTs were characterized by FTIR, Raman, XPS, and TEM. Using the strategy of “grafting through,” poly(methyl methacrylate) (PMMA) chains were grafted onto the surface of MWCNTs during the in situ synthesis of MWCNT/PMMA nanocomposites over reversible addition‐fragmentation chain transfer (RAFT) polymerization. Kinetics of RAFT‐mediated polymerization of MMA in the presence of MMA‐grafted MWCNTs was studied by using gas chromatography and gel permeation chromatography. To further study, attached polymers were detached and their molecular characteristics were compared to freely formed chains. Results of kinetic studies showed that the utilized commercial chain transfer agent strictly reduced the rate of polymerization as well as relatively controlled molecular weights and narrow molecular weight distributions of free chains. MWCNTs showed a radical activity, retarding the polymerization and reducing the rate of reaction. The effect of MWCNTs concentrations on molecular weights and polydispersity indexes (PDI) was different at the surface and in the bulk. The molecular weights of free chains increased, and the PDI was decreased with increasing MWCNTs. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 44: 555–569, 2012     

“Living”/controlled free radical polymerization of MMA in the presence of cobalt(II) 2‐ethylhexanoate: A switch from RAFT to ATRP mechanism

A metal complex, cobalt(II) 2‐ethylhexanoate (CEH), was added to the system of thermal‐initiated reversible addition‐fragmentation chain transfer (RAFT) polymerization of methyl methacrylate (MMA) with 2‐cyanoprop‐2‐yl 1‐dithionaphthalate (CPDN) as the RAFT agent at 115 °C. The polymerization rate was remarkably enhanced in the presence of CEH in comparison with that in the absence of CEH, and the increase of the CPDN concentration also accelerated the rate of polymerization. The polymerization in the concurrence of CPDN and CEH demonstrated the characters of “living”/controlled free radical polymerization: the number‐average molecular weights (M_n) increasing linearly with monomer conversion, narrow molecular weight distributions (M_w/M_n) and obtained PMMA end‐capped with the CPDN moieties. Meanwhile, CEH can also accelerate the rate of RAFT polymerization of MMA using the PMMA as macro‐RAFT agent instead of CPDN. Similar polymerization profiles were obtained when copper (I) bromide (CuBr)/N,N,N′,N′′,N′′‐pentamethyldiethylenetriamine was used instead of CEH. Extensive experiments in the presence of butyl methacrylate, bis(cyclopentadienyl) cobalt(II) and cumyl dithionaphthalenoate were also conducted; similar results as those of MMA/CPDN/CEH system were obtained. A transition of the polymerization mechanism, from RAFT process without CEH addition to atom transfer radical polymerization in the presence of CEH, was possibly responsible for polymerization profiles. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5722–5730, 2007     

Synthesis of Poly (methyl methacrylate)/Zinc Oxide Nanocomposite with Core-Shell Morphology by Atom Transfer Radical Polymerization

A method to prepare zinc oxide (ZnO) nanoparticles with a covalently bonded poly(methyl methacrylate) (PMMA) shell by surface initiated atom transfer radical polymerization (ATRP) was reported. First, the initiator for ATRP was covalently bonded onto the surface of zinc oxide nanoparticles through our novel method. Firstly, the surface of ZnO nanoparticle was treated with 3-aminopropyl triethoxysilane, a silane coupling agent, and then this functionalization nanoparticle was reacted with α-chloro phenyl acetyl chloride to prepare atom transfer radical polymerization macroinitiator. The metal-catalyzed radical polymerization of MMA with ZnOmacroinitiator was performed using a copper catalyst system to give the ZnO-based nanoparticles hybrids linking PMMA segments (poly (methyl methacrylate)/zinc oxide nanocomposite). These hybrid nanoparticles had an exceptionally good dispersability in organic solvents and were subjected to detailed characterization using FTIR, TEM and TGA and DSC analyzed.     

用双硫酯链转移法合成嵌段聚合物

研究了以双硫酯为链转移剂进行的均聚和嵌段共聚物的合成 .首先合成大分子链转移剂 ,得到分子量可控、多分散性系数较小的均聚物PMMA、PBMA、PEMA、PEA、PBA、PMA、PSt,多分散性系数一般小于 1 30 .在相同的条件下 ,甲基丙烯酸酯类的聚合速度最快 ,苯乙烯其次 ,丙烯酸酯类最慢 .用末端带有双硫酯基团的PSt、PBMA、PBA为链转移剂 ,加入多种第二单体聚合得到实测分子量与理论分子量接近 ,且多分散性系数较小的两嵌段聚合物 .在链转移剂和引发剂的比例为 3∶1～ 6∶1的范围内 ,聚苯乙烯同样可以作为第一嵌段得到和其它酯类单体的两嵌段聚合物 .1 H NMR方法证明了聚合物的末端带有双硫酯基团 .嵌段聚合时必须加入微量的自由基引发剂以形成大分子自由基 ,达到较好的控制聚合效果     

由铜-胺氧化还原引发反应一步法简便制备TiO_2表面接枝聚甲基丙烯酸甲酯纳米杂化粒子

提出并验证了一种通过普通自由基聚合在纳米TiO2表面接枝聚甲基丙烯酸甲酯的简单方法.通过在纳米TiO2粒子表面引入伯胺分子层(纳米TiO2-NH2粒子),利用Cu2+-胺氧化还原体系实现了CuSO4催化纳米TiO2-NH2粒子表面引发甲基丙烯酸甲酯(MMA)的自由基接枝聚合,从而一步得到表面固定有聚甲基丙烯酸甲酯链的纳米TiO2杂化粒子(纳米TiO2-PMMA杂化粒子).红外光谱、热失重分析与电镜的结果都表明PMMA已经被接枝到纳米TiO2粒子表面,且接枝率随着聚合时间的延长而逐渐增大,PMMA链的引入有助于降低纳米TiO2粒子微球的团聚程度、增强与有机溶剂分子的范德华力,从而提高分散稳定性.反应溶液中没有游离均聚物形成.     

Living free‐radical polymerization (reversible addition–fragmentation chain transfer) of 6‐[4‐(4′‐methoxyphenyl)phenoxy]hexyl methacrylate: A route to architectural control of side‐chain liquid‐crystalline polymers

Side‐chain liquid‐crystalline polymers of 6‐[4‐(4′‐methoxyphenyl)phenoxy]hexyl methacrylate with controlled molecular weights and narrow polydispersities were prepared via reversible addition–fragmentation chain transfer (RAFT) polymerization with 2‐(2‐cyanopropyl) dithiobenzoate as the RAFT agent. Differential scanning calorimetry studies showed that the polymers produced via the RAFT process had a narrower thermal stability range of the liquid‐crystalline mesophase than the polymers formed via conventional free‐radical polymerization. In addition, a chain length dependence of this stability range was found. The generated RAFT polymers displayed optical textures similar to those of polymers produced via conventional free‐radical polymerization. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2949–2963, 2003     

非水凝胶原位聚合法制备三异丙氧基钕/PMMA杂化材料的研究

通过三异丙氧基钕直接掺入MMA单体 ,迅速形成凝胶后进行原位聚合的方法制得三异丙氧基钕 /PMMA杂化材料 ,采用IR、TG、WAXD、DMTA、SEM等手段对其进行表征 .结果表明 ,三异丙氧基钕与MMA中的羰基因配位并导致交联形成了交联网状结构的杂化材料 .与PMMA相比 ,这种杂化材料具有优良的耐热性、耐溶剂性 ,高贮能模量 ,同时 ,该制备方法克服了稀土离子易缔合的缺点 ,获得了高稀土含量且均匀分布的三异丙氧基钕 /PMMA杂化材料     

PMMA/SiO_2/OV-POSS杂化材料的制备与表征

以乙烯基三氯硅烷为原料水解制得八乙烯基多面体低聚倍半硅氧烷(OV-POSS),将其与经KH570改性的SiO2溶胶和甲基丙烯酸甲酯(MMA)混合均匀,采用热固化的方法制得PMMA/SiO2/OV-POSS杂化材料,通过透射电镜、红外谱图、差热分析和热重分析对材料的微观结构以及热性能进行表征,结果表明:杂化材料结构均匀,有机相和无机相之间通过双键聚合的方式形成了共价键;杂化材料耐热性好,玻璃化转变温度比纯PMMA提高约72℃,分解温度提高约121℃。     

Preparation of poly(methyl methacrylate) grafted hydroxyapatite nanoparticles via reverse ATRP

Surface-initiated reverse atom transfer radical polymerization (reverse ATRP) technical was successfully employed to modify hydroxyapatite (HAP) nanoparticles with poly(methyl methacrylate) (PMMA). The peroxide initiator moiety for reverse ATRP was covalently attached to the HAP surface through the surface hydroxyl groups. Reverse ATRP of methyl methacrylate (MMA) from the initiator-functionalized HAP was carried out, and the end bromide groups of grafted PMMA initiated ATRP of MMA subsequently. Fourier transformation infrared (FTIR) spectroscopy, thermal gravimetric analysis (TGA) and transmission electron microscopy (TEM) were employed to confirm the grafting and to characterize the nanoparticle structure. The grafted PMMA gave HAP nanoparticles excellent dispersibility in MMA monomer. As the amount of grafted PMMA increased, the dispersibility of surface-grafted HAP and the compressive strength of HAP/PMMA composites were improved.     

Vinylimidazole‐based asymmetric ion pair comonomers: Synthesis,polymerization studies and formation of ionically crosslinked PMMA

Vinylimidazole‐based asymmetric ion pair comonomers ( IPC s) which are free from nonpolymerizable counter ions have been synthesized, characterized and polymerized by free radical polymerization (FRP), atom transfer radical polymerization (ATRP), and reversible addition‐fragmentation chain transfer (RAFT) mediated polymerizations in solution and by dispersion polymerization in water. The asymmetric nature of IPC s is due to the fact that cationic component of these IPCs is derived from vinylimidazole (VIm) and anionic component is derived from either styrenesulfonate (SS) or 2‐acrylamido‐2‐methyl‐1‐propanesulfonate. Although under ATRP, conversions are either very low or negligible, FRP and RAFT produces polymers with high to moderate monomer conversions but with different solubility characteristics. This investigation provides insight to the polymerization behavior of each component of the asymmetric IPCs and also its effects on composition and solubility characteristics of the resulting polymers. The IPCs studied here are high temperature ionic liquid and thus the polymers synthesized from these IPCs are highly ionic in nature and possess very strong intermolecular interactions which makes some of these IPC based polymers completely insoluble in organic and aqueous solvents. This highly ionic interaction is exploited to synthesize ionically crosslinked PMMA. MMA on copolymerization with 5–6 mol % of IPC yielded copolymer which is insoluble in common organic solvents like THF, DMF, etc., unlike homo PMMA. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3260–3273     

Synthesis and characterization of polymer/clay nanocomposites by intercalated chain transfer agent

In situ synthesis of poly(methyl methacrylate) (PMMA) and polystyrene (PS) nanocomposites by free radical polymerization using intercalated chain transfer agent (I-CTA) in the layers of montmorillonite (MMT) clay is reported. MMT clay was ion-exchanged with diethyl octyl ammonium ethylmercaptan bromide, which acts both as suitable intercalant and as chain transfer agent. These modified clays were then dispersed in methyl methacrylate (MMA) or styrene (St) monomers in different loading degrees to carry out the in situ free radical polymerization. The intercalation ability of the chain transfer agent and exfoliated nanocomposite structure were evidenced by both X-ray diffraction spectroscopy (XRD) and transmission electron microscopy (TEM). Thermal properties and morphologies of the resultant nanocomposites were also studied.     

Perylene as a visible light photoredox catalyst for photoinduced electron transfer-reversible addition-fragmentation chain transfer (PET-RAFT) polymerization of MMA

Abstract

The organic photocatalyst, perylene, was used to mediate photoinduced electron transfer (PET) reversible addition-fragmentation chain transfer polymerization (RAFT) of methyl methhacrylate (MMA) under light irradiation in N,N-dimethylformamide (DMF) at 25°C with 4-cyanopentanoic acid dithiobenzoate (CPADB) as chain transfer agent (CTA). Kinetic studies confirmed that the polymerization obeyed the first order kinetic m'odel. The production of PMMAs with a good control of molecular weights (M_n,GPC) and narrow polymer molecular weight distribution (M_w/M_n) were obtained. It is found that well-controlled PET RAFT polymerization of MMA can be manipulated even with the amount of perylene decreasing to ppm level. No polymer was obtained in the absence of light irradiation, implying that the model of PET RAFT polymerization of MMA is an ideal light “on”-“off” switchable system. Furthermore, the speed of PET RAFT polymerization of MMA was also finely tunable by the external light irradiation intensity. The resultant PMMA macro-CTA was characterized by ¹H nuclear magnetic resonance spectrum (¹H NMR) and gel permeation chromatography (GPC). The accessibility of the high end group fidelity was further demonstrated by chain extension experiments.     

RAFT试剂N-咔唑二硫代甲酸1,4-对二甲基苯双酯的合成及应用

以咔唑和对二氯甲基苯为原料, 合成了以咔唑为Z基团的双功能团RAFT聚合链转移试剂N-咔唑二硫代甲酸1,4-对二甲基苯双酯(PXCBD). 以PXCBD为链转移试剂, 以苯乙烯、丙烯酸甲酯及N,N-二丁基丙烯酰胺为单体, 考察了PXCBD在RAFT聚合中合成多嵌段共聚物上的应用, 并研究了PXCBD及由其合成的聚合物的荧光特性. 研究结果表明, PXCBD是一种性能优异的双功能团RAFT聚合链转移试剂, 可用于合成特殊结构并且带有荧光标识的功能高分子材料.     

β-CD存在下MMA细乳液体系的RAFT聚合

近年来，活性自由基聚合已成为高分子合成领域中的一个热门课题．Rizzardo研究小组提出了一种新型活性自由基聚合反应，即RAFT(Reversible addition-fragmentation chain transfer)聚合．RAFT反应在传统的自由基聚合中加入了具有高链转移常数和特定结构的链转移剂——双硫酯类化合物．当链转移剂的浓度足够大时，链转移反应由不可逆变为可逆，聚合反应也随之发生质的变化，由不可控     

Orthogonal Cationic and Radical RAFT Polymerizations to Prepare Bottlebrush Polymers

An orthogonal combination of cationic and radical RAFT polymerizations is used to synthesize bottlebrush polymers using two distinct RAFT agents. Selective consumption of the first RAFT agent is used to control the cationic RAFT polymerization of a vinyl ether monomer bearing a secondary dormant RAFT agent, which subsequently allows side‐chain polymers to be grafted from the pendant RAFT agent by a radical‐mediated RAFT polymerization of a different monomer, thus completing the synthesis of bottlebrush polymers. The high efficiency and selectivity of the cationic and radical RAFT polymerizations allow both polymerizations to be conducted in one‐pot tandem without intermediate purification.     

SiO2交联剂交联MMA聚合制备PMMA/SiO2纳米复合材料

用SiO2交联剂(SiO2HPA)交联甲基丙烯酸甲酯(MMA)自由基聚合制备PMMA SiO2纳米复合材料。采用两步法将可聚合乙烯基单体以化学键的形式键接到SiO2表面合成SiO2交联剂,首先利用过量的甲苯2,4二异氰酸酯(TDI)对SiO2纳米粒子表面进行化学修饰合成出表面带有高反应活性NCO基团的功能化SiO2粒子(SiO2TDI),SiO2TDI与丙烯酸羟丙酯(HPA)反应合成SiO2交联剂。系统研究了MMA单体与SiO2交联剂投料比及聚合时间对聚合反应的影响。此外,利用红外光谱(FT IR)、DSC、TGA、可见光光谱仪等实验手段对纳米复合材料进行了表征分析。结果表明,纳米SiO2粒子在复合材料中起着物理交联点和化学交联点作用,复合材料玻璃化转变温度(Tg)明显地高于其纯PMMA的玻璃化转变温度,随着纳米SiO2粒子含量的增加,复合材料玻璃化温度升高,而透明度明显降低。     

Reversible Addition‐Fragmentation Transfer Polymerization in the Presence of MMT Immobilized Amphoteric RAFT Agent

Summary: A novel reversible addition‐fragmentation transfer (RAFT) agent, 10‐carboxylic acid‐10‐dithiobenzoate‐decyltrimethylammonium bromide (CDDA), was synthesized and intercalated into montmorillonite (MMT). Successively, the CDDA‐intercalated MMT was used as RAFT agent in the in situ RAFT polymerization for preparation of the polystyrene/MMT nanocomposites. After separation of MMT, the polymers obtained have predictable molecular weight and narrow polydispersity. XRD spectra and TEM images of the nanocomposites demonstrated exfoliated structure. Thermal stability of the composites has been noticeably improved.

     

Properties of matrix-grafted multi-walled carbon nanotube/poly(methyl methacrylate) nanocomposites synthesized by in situ reversible addition-fragmentation chain transfer polymerization

Multi-walled carbon nanotubes (MWCNT)/poly(methyl methacrylate) (PMMA) nanocomposites were synthesized by the in situ reversible addition-fragmentation chain transfer (RAFT) polymerization of methyl methacrylate (MMA) in the presence of MWCNTs, at which the bulk polymer was grafted onto the surface of nanotubes through the ??grafting through?? strategy. For this purpose, MWCNTs were formerly functionalized with polymerizable MMA groups. MMA and PMMA-grafted MWCNTs were characterized by Fourier-transform infrared spectroscopy, Raman, X-ray photoelectron spectroscopy, transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). Dissolution of nanotubes was examined in chloroform solvent and studied by UV?Cvis spectroscopy. Thermogravimetric and degradation behavior of prepared nanocomposites was investigated by TGA. MWCNTs had a noticeable boosting effect on the thermal stability of nanocomposites. TGA thermograms showed a two-step weight loss pattern for the degradation of MWCNT-PMMA/PMMA nanocomposites which is contrast with neat PMMA. Introduction of MWCNTs also improved the dynamic mechanical behavior and electrical conductivity of nanocomposites. TEM micrograph of nanocomposite revealed that the applied methods for functionalization of nanotubes and in situ synthesis of nanocomposites were comparatively successful in dispersing the MWCNTs in PMMA matrix.